Commit b96e3147 authored by Marcel Stör's avatar Marcel Stör Committed by GitHub
Browse files

Merge pull request #1774 from nodemcu/dev

2.0.0 master drop
parents 81ec3665 20a591f5
/**
* \file pem.h
*
* \brief Privacy Enhanced Mail (PEM) decoding
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PEM_H
#define MBEDTLS_PEM_H
#include <stddef.h>
/**
* \name PEM Error codes
* These error codes are returned in case of errors reading the
* PEM data.
* \{
*/
#define MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT -0x1080 /**< No PEM header or footer found. */
#define MBEDTLS_ERR_PEM_INVALID_DATA -0x1100 /**< PEM string is not as expected. */
#define MBEDTLS_ERR_PEM_ALLOC_FAILED -0x1180 /**< Failed to allocate memory. */
#define MBEDTLS_ERR_PEM_INVALID_ENC_IV -0x1200 /**< RSA IV is not in hex-format. */
#define MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG -0x1280 /**< Unsupported key encryption algorithm. */
#define MBEDTLS_ERR_PEM_PASSWORD_REQUIRED -0x1300 /**< Private key password can't be empty. */
#define MBEDTLS_ERR_PEM_PASSWORD_MISMATCH -0x1380 /**< Given private key password does not allow for correct decryption. */
#define MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE -0x1400 /**< Unavailable feature, e.g. hashing/encryption combination. */
#define MBEDTLS_ERR_PEM_BAD_INPUT_DATA -0x1480 /**< Bad input parameters to function. */
/* \} name */
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_PEM_PARSE_C)
/**
* \brief PEM context structure
*/
typedef struct
{
unsigned char *buf; /*!< buffer for decoded data */
size_t buflen; /*!< length of the buffer */
unsigned char *info; /*!< buffer for extra header information */
}
mbedtls_pem_context;
/**
* \brief PEM context setup
*
* \param ctx context to be initialized
*/
void mbedtls_pem_init( mbedtls_pem_context *ctx );
/**
* \brief Read a buffer for PEM information and store the resulting
* data into the specified context buffers.
*
* \param ctx context to use
* \param header header string to seek and expect
* \param footer footer string to seek and expect
* \param data source data to look in (must be nul-terminated)
* \param pwd password for decryption (can be NULL)
* \param pwdlen length of password
* \param use_len destination for total length used (set after header is
* correctly read, so unless you get
* MBEDTLS_ERR_PEM_BAD_INPUT_DATA or
* MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT, use_len is
* the length to skip)
*
* \note Attempts to check password correctness by verifying if
* the decrypted text starts with an ASN.1 sequence of
* appropriate length
*
* \return 0 on success, or a specific PEM error code
*/
int mbedtls_pem_read_buffer( mbedtls_pem_context *ctx, const char *header, const char *footer,
const unsigned char *data,
const unsigned char *pwd,
size_t pwdlen, size_t *use_len );
/**
* \brief PEM context memory freeing
*
* \param ctx context to be freed
*/
void mbedtls_pem_free( mbedtls_pem_context *ctx );
#endif /* MBEDTLS_PEM_PARSE_C */
#if defined(MBEDTLS_PEM_WRITE_C)
/**
* \brief Write a buffer of PEM information from a DER encoded
* buffer.
*
* \param header header string to write
* \param footer footer string to write
* \param der_data DER data to write
* \param der_len length of the DER data
* \param buf buffer to write to
* \param buf_len length of output buffer
* \param olen total length written / required (if buf_len is not enough)
*
* \return 0 on success, or a specific PEM or BASE64 error code. On
* MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL olen is the required
* size.
*/
int mbedtls_pem_write_buffer( const char *header, const char *footer,
const unsigned char *der_data, size_t der_len,
unsigned char *buf, size_t buf_len, size_t *olen );
#endif /* MBEDTLS_PEM_WRITE_C */
#ifdef __cplusplus
}
#endif
#endif /* pem.h */
/**
* \file pk.h
*
* \brief Public Key abstraction layer
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PK_H
#define MBEDTLS_PK_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "md.h"
#if defined(MBEDTLS_RSA_C)
#include "rsa.h"
#endif
#if defined(MBEDTLS_ECP_C)
#include "ecp.h"
#endif
#if defined(MBEDTLS_ECDSA_C)
#include "ecdsa.h"
#endif
#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
!defined(inline) && !defined(__cplusplus)
#define inline __inline
#endif
#define MBEDTLS_ERR_PK_ALLOC_FAILED -0x3F80 /**< Memory allocation failed. */
#define MBEDTLS_ERR_PK_TYPE_MISMATCH -0x3F00 /**< Type mismatch, eg attempt to encrypt with an ECDSA key */
#define MBEDTLS_ERR_PK_BAD_INPUT_DATA -0x3E80 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_PK_FILE_IO_ERROR -0x3E00 /**< Read/write of file failed. */
#define MBEDTLS_ERR_PK_KEY_INVALID_VERSION -0x3D80 /**< Unsupported key version */
#define MBEDTLS_ERR_PK_KEY_INVALID_FORMAT -0x3D00 /**< Invalid key tag or value. */
#define MBEDTLS_ERR_PK_UNKNOWN_PK_ALG -0x3C80 /**< Key algorithm is unsupported (only RSA and EC are supported). */
#define MBEDTLS_ERR_PK_PASSWORD_REQUIRED -0x3C00 /**< Private key password can't be empty. */
#define MBEDTLS_ERR_PK_PASSWORD_MISMATCH -0x3B80 /**< Given private key password does not allow for correct decryption. */
#define MBEDTLS_ERR_PK_INVALID_PUBKEY -0x3B00 /**< The pubkey tag or value is invalid (only RSA and EC are supported). */
#define MBEDTLS_ERR_PK_INVALID_ALG -0x3A80 /**< The algorithm tag or value is invalid. */
#define MBEDTLS_ERR_PK_UNKNOWN_NAMED_CURVE -0x3A00 /**< Elliptic curve is unsupported (only NIST curves are supported). */
#define MBEDTLS_ERR_PK_FEATURE_UNAVAILABLE -0x3980 /**< Unavailable feature, e.g. RSA disabled for RSA key. */
#define MBEDTLS_ERR_PK_SIG_LEN_MISMATCH -0x3900 /**< The signature is valid but its length is less than expected. */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Public key types
*/
typedef enum {
MBEDTLS_PK_NONE=0,
MBEDTLS_PK_RSA,
MBEDTLS_PK_ECKEY,
MBEDTLS_PK_ECKEY_DH,
MBEDTLS_PK_ECDSA,
MBEDTLS_PK_RSA_ALT,
MBEDTLS_PK_RSASSA_PSS,
} mbedtls_pk_type_t;
/**
* \brief Options for RSASSA-PSS signature verification.
* See \c mbedtls_rsa_rsassa_pss_verify_ext()
*/
typedef struct
{
mbedtls_md_type_t mgf1_hash_id;
int expected_salt_len;
} mbedtls_pk_rsassa_pss_options;
/**
* \brief Types for interfacing with the debug module
*/
typedef enum
{
MBEDTLS_PK_DEBUG_NONE = 0,
MBEDTLS_PK_DEBUG_MPI,
MBEDTLS_PK_DEBUG_ECP,
} mbedtls_pk_debug_type;
/**
* \brief Item to send to the debug module
*/
typedef struct
{
mbedtls_pk_debug_type type;
const char *name;
void *value;
} mbedtls_pk_debug_item;
/** Maximum number of item send for debugging, plus 1 */
#define MBEDTLS_PK_DEBUG_MAX_ITEMS 3
/**
* \brief Public key information and operations
*/
typedef struct mbedtls_pk_info_t mbedtls_pk_info_t;
/**
* \brief Public key container
*/
typedef struct
{
const mbedtls_pk_info_t * pk_info; /**< Public key informations */
void * pk_ctx; /**< Underlying public key context */
} mbedtls_pk_context;
#if defined(MBEDTLS_RSA_C)
/**
* Quick access to an RSA context inside a PK context.
*
* \warning You must make sure the PK context actually holds an RSA context
* before using this function!
*/
static inline mbedtls_rsa_context *mbedtls_pk_rsa( const mbedtls_pk_context pk )
{
return( (mbedtls_rsa_context *) (pk).pk_ctx );
}
#endif /* MBEDTLS_RSA_C */
#if defined(MBEDTLS_ECP_C)
/**
* Quick access to an EC context inside a PK context.
*
* \warning You must make sure the PK context actually holds an EC context
* before using this function!
*/
static inline mbedtls_ecp_keypair *mbedtls_pk_ec( const mbedtls_pk_context pk )
{
return( (mbedtls_ecp_keypair *) (pk).pk_ctx );
}
#endif /* MBEDTLS_ECP_C */
#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT)
/**
* \brief Types for RSA-alt abstraction
*/
typedef int (*mbedtls_pk_rsa_alt_decrypt_func)( void *ctx, int mode, size_t *olen,
const unsigned char *input, unsigned char *output,
size_t output_max_len );
typedef int (*mbedtls_pk_rsa_alt_sign_func)( void *ctx,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng,
int mode, mbedtls_md_type_t md_alg, unsigned int hashlen,
const unsigned char *hash, unsigned char *sig );
typedef size_t (*mbedtls_pk_rsa_alt_key_len_func)( void *ctx );
#endif /* MBEDTLS_PK_RSA_ALT_SUPPORT */
/**
* \brief Return information associated with the given PK type
*
* \param pk_type PK type to search for.
*
* \return The PK info associated with the type or NULL if not found.
*/
const mbedtls_pk_info_t *mbedtls_pk_info_from_type( mbedtls_pk_type_t pk_type );
/**
* \brief Initialize a mbedtls_pk_context (as NONE)
*/
void mbedtls_pk_init( mbedtls_pk_context *ctx );
/**
* \brief Free a mbedtls_pk_context
*/
void mbedtls_pk_free( mbedtls_pk_context *ctx );
/**
* \brief Initialize a PK context with the information given
* and allocates the type-specific PK subcontext.
*
* \param ctx Context to initialize. Must be empty (type NONE).
* \param info Information to use
*
* \return 0 on success,
* MBEDTLS_ERR_PK_BAD_INPUT_DATA on invalid input,
* MBEDTLS_ERR_PK_ALLOC_FAILED on allocation failure.
*
* \note For contexts holding an RSA-alt key, use
* \c mbedtls_pk_setup_rsa_alt() instead.
*/
int mbedtls_pk_setup( mbedtls_pk_context *ctx, const mbedtls_pk_info_t *info );
#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT)
/**
* \brief Initialize an RSA-alt context
*
* \param ctx Context to initialize. Must be empty (type NONE).
* \param key RSA key pointer
* \param decrypt_func Decryption function
* \param sign_func Signing function
* \param key_len_func Function returning key length in bytes
*
* \return 0 on success, or MBEDTLS_ERR_PK_BAD_INPUT_DATA if the
* context wasn't already initialized as RSA_ALT.
*
* \note This function replaces \c mbedtls_pk_setup() for RSA-alt.
*/
int mbedtls_pk_setup_rsa_alt( mbedtls_pk_context *ctx, void * key,
mbedtls_pk_rsa_alt_decrypt_func decrypt_func,
mbedtls_pk_rsa_alt_sign_func sign_func,
mbedtls_pk_rsa_alt_key_len_func key_len_func );
#endif /* MBEDTLS_PK_RSA_ALT_SUPPORT */
/**
* \brief Get the size in bits of the underlying key
*
* \param ctx Context to use
*
* \return Key size in bits, or 0 on error
*/
size_t mbedtls_pk_get_bitlen( const mbedtls_pk_context *ctx );
/**
* \brief Get the length in bytes of the underlying key
* \param ctx Context to use
*
* \return Key length in bytes, or 0 on error
*/
static inline size_t mbedtls_pk_get_len( const mbedtls_pk_context *ctx )
{
return( ( mbedtls_pk_get_bitlen( ctx ) + 7 ) / 8 );
}
/**
* \brief Tell if a context can do the operation given by type
*
* \param ctx Context to test
* \param type Target type
*
* \return 0 if context can't do the operations,
* 1 otherwise.
*/
int mbedtls_pk_can_do( const mbedtls_pk_context *ctx, mbedtls_pk_type_t type );
/**
* \brief Verify signature (including padding if relevant).
*
* \param ctx PK context to use
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
* \param sig Signature to verify
* \param sig_len Signature length
*
* \return 0 on success (signature is valid),
* MBEDTLS_ERR_PK_SIG_LEN_MISMATCH if the signature is
* valid but its actual length is less than sig_len,
* or a specific error code.
*
* \note For RSA keys, the default padding type is PKCS#1 v1.5.
* Use \c mbedtls_pk_verify_ext( MBEDTLS_PK_RSASSA_PSS, ... )
* to verify RSASSA_PSS signatures.
*
* \note If hash_len is 0, then the length associated with md_alg
* is used instead, or an error returned if it is invalid.
*
* \note md_alg may be MBEDTLS_MD_NONE, only if hash_len != 0
*/
int mbedtls_pk_verify( mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
const unsigned char *sig, size_t sig_len );
/**
* \brief Verify signature, with options.
* (Includes verification of the padding depending on type.)
*
* \param type Signature type (inc. possible padding type) to verify
* \param options Pointer to type-specific options, or NULL
* \param ctx PK context to use
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
* \param sig Signature to verify
* \param sig_len Signature length
*
* \return 0 on success (signature is valid),
* MBEDTLS_ERR_PK_TYPE_MISMATCH if the PK context can't be
* used for this type of signatures,
* MBEDTLS_ERR_PK_SIG_LEN_MISMATCH if the signature is
* valid but its actual length is less than sig_len,
* or a specific error code.
*
* \note If hash_len is 0, then the length associated with md_alg
* is used instead, or an error returned if it is invalid.
*
* \note md_alg may be MBEDTLS_MD_NONE, only if hash_len != 0
*
* \note If type is MBEDTLS_PK_RSASSA_PSS, then options must point
* to a mbedtls_pk_rsassa_pss_options structure,
* otherwise it must be NULL.
*/
int mbedtls_pk_verify_ext( mbedtls_pk_type_t type, const void *options,
mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
const unsigned char *sig, size_t sig_len );
/**
* \brief Make signature, including padding if relevant.
*
* \param ctx PK context to use - must hold a private key
* \param md_alg Hash algorithm used (see notes)
* \param hash Hash of the message to sign
* \param hash_len Hash length or 0 (see notes)
* \param sig Place to write the signature
* \param sig_len Number of bytes written
* \param f_rng RNG function
* \param p_rng RNG parameter
*
* \return 0 on success, or a specific error code.
*
* \note For RSA keys, the default padding type is PKCS#1 v1.5.
* There is no interface in the PK module to make RSASSA-PSS
* signatures yet.
*
* \note If hash_len is 0, then the length associated with md_alg
* is used instead, or an error returned if it is invalid.
*
* \note For RSA, md_alg may be MBEDTLS_MD_NONE if hash_len != 0.
* For ECDSA, md_alg may never be MBEDTLS_MD_NONE.
*/
int mbedtls_pk_sign( mbedtls_pk_context *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
unsigned char *sig, size_t *sig_len,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
* \brief Decrypt message (including padding if relevant).
*
* \param ctx PK context to use - must hold a private key
* \param input Input to decrypt
* \param ilen Input size
* \param output Decrypted output
* \param olen Decrypted message length
* \param osize Size of the output buffer
* \param f_rng RNG function
* \param p_rng RNG parameter
*
* \note For RSA keys, the default padding type is PKCS#1 v1.5.
*
* \return 0 on success, or a specific error code.
*/
int mbedtls_pk_decrypt( mbedtls_pk_context *ctx,
const unsigned char *input, size_t ilen,
unsigned char *output, size_t *olen, size_t osize,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
* \brief Encrypt message (including padding if relevant).
*
* \param ctx PK context to use
* \param input Message to encrypt
* \param ilen Message size
* \param output Encrypted output
* \param olen Encrypted output length
* \param osize Size of the output buffer
* \param f_rng RNG function
* \param p_rng RNG parameter
*
* \note For RSA keys, the default padding type is PKCS#1 v1.5.
*
* \return 0 on success, or a specific error code.
*/
int mbedtls_pk_encrypt( mbedtls_pk_context *ctx,
const unsigned char *input, size_t ilen,
unsigned char *output, size_t *olen, size_t osize,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng );
/**
* \brief Check if a public-private pair of keys matches.
*
* \param pub Context holding a public key.
* \param prv Context holding a private (and public) key.
*
* \return 0 on success or MBEDTLS_ERR_PK_BAD_INPUT_DATA
*/
int mbedtls_pk_check_pair( const mbedtls_pk_context *pub, const mbedtls_pk_context *prv );
/**
* \brief Export debug information
*
* \param ctx Context to use
* \param items Place to write debug items
*
* \return 0 on success or MBEDTLS_ERR_PK_BAD_INPUT_DATA
*/
int mbedtls_pk_debug( const mbedtls_pk_context *ctx, mbedtls_pk_debug_item *items );
/**
* \brief Access the type name
*
* \param ctx Context to use
*
* \return Type name on success, or "invalid PK"
*/
const char * mbedtls_pk_get_name( const mbedtls_pk_context *ctx );
/**
* \brief Get the key type
*
* \param ctx Context to use
*
* \return Type on success, or MBEDTLS_PK_NONE
*/
mbedtls_pk_type_t mbedtls_pk_get_type( const mbedtls_pk_context *ctx );
#if defined(MBEDTLS_PK_PARSE_C)
/** \ingroup pk_module */
/**
* \brief Parse a private key in PEM or DER format
*
* \param ctx key to be initialized
* \param key input buffer
* \param keylen size of the buffer
* (including the terminating null byte for PEM data)
* \param pwd password for decryption (optional)
* \param pwdlen size of the password
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
* specific key type, check the result with mbedtls_pk_can_do().
*
* \note The key is also checked for correctness.
*
* \return 0 if successful, or a specific PK or PEM error code
*/
int mbedtls_pk_parse_key( mbedtls_pk_context *ctx,
const unsigned char *key, size_t keylen,
const unsigned char *pwd, size_t pwdlen );
/** \ingroup pk_module */
/**
* \brief Parse a public key in PEM or DER format
*
* \param ctx key to be initialized
* \param key input buffer
* \param keylen size of the buffer
* (including the terminating null byte for PEM data)
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
* specific key type, check the result with mbedtls_pk_can_do().
*
* \note The key is also checked for correctness.
*
* \return 0 if successful, or a specific PK or PEM error code
*/
int mbedtls_pk_parse_public_key( mbedtls_pk_context *ctx,
const unsigned char *key, size_t keylen );
#if defined(MBEDTLS_FS_IO)
/** \ingroup pk_module */
/**
* \brief Load and parse a private key
*
* \param ctx key to be initialized
* \param path filename to read the private key from
* \param password password to decrypt the file (can be NULL)
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
* specific key type, check the result with mbedtls_pk_can_do().
*
* \note The key is also checked for correctness.
*
* \return 0 if successful, or a specific PK or PEM error code
*/
int mbedtls_pk_parse_keyfile( mbedtls_pk_context *ctx,
const char *path, const char *password );
/** \ingroup pk_module */
/**
* \brief Load and parse a public key
*
* \param ctx key to be initialized
* \param path filename to read the private key from
*
* \note On entry, ctx must be empty, either freshly initialised
* with mbedtls_pk_init() or reset with mbedtls_pk_free(). If you need a
* specific key type, check the result with mbedtls_pk_can_do().
*
* \note The key is also checked for correctness.
*
* \return 0 if successful, or a specific PK or PEM error code
*/
int mbedtls_pk_parse_public_keyfile( mbedtls_pk_context *ctx, const char *path );
#endif /* MBEDTLS_FS_IO */
#endif /* MBEDTLS_PK_PARSE_C */
#if defined(MBEDTLS_PK_WRITE_C)
/**
* \brief Write a private key to a PKCS#1 or SEC1 DER structure
* Note: data is written at the end of the buffer! Use the
* return value to determine where you should start
* using the buffer
*
* \param ctx private to write away
* \param buf buffer to write to
* \param size size of the buffer
*
* \return length of data written if successful, or a specific
* error code
*/
int mbedtls_pk_write_key_der( mbedtls_pk_context *ctx, unsigned char *buf, size_t size );
/**
* \brief Write a public key to a SubjectPublicKeyInfo DER structure
* Note: data is written at the end of the buffer! Use the
* return value to determine where you should start
* using the buffer
*
* \param ctx public key to write away
* \param buf buffer to write to
* \param size size of the buffer
*
* \return length of data written if successful, or a specific
* error code
*/
int mbedtls_pk_write_pubkey_der( mbedtls_pk_context *ctx, unsigned char *buf, size_t size );
#if defined(MBEDTLS_PEM_WRITE_C)
/**
* \brief Write a public key to a PEM string
*
* \param ctx public key to write away
* \param buf buffer to write to
* \param size size of the buffer
*
* \return 0 if successful, or a specific error code
*/
int mbedtls_pk_write_pubkey_pem( mbedtls_pk_context *ctx, unsigned char *buf, size_t size );
/**
* \brief Write a private key to a PKCS#1 or SEC1 PEM string
*
* \param ctx private to write away
* \param buf buffer to write to
* \param size size of the buffer
*
* \return 0 if successful, or a specific error code
*/
int mbedtls_pk_write_key_pem( mbedtls_pk_context *ctx, unsigned char *buf, size_t size );
#endif /* MBEDTLS_PEM_WRITE_C */
#endif /* MBEDTLS_PK_WRITE_C */
/*
* WARNING: Low-level functions. You probably do not want to use these unless
* you are certain you do ;)
*/
#if defined(MBEDTLS_PK_PARSE_C)
/**
* \brief Parse a SubjectPublicKeyInfo DER structure
*
* \param p the position in the ASN.1 data
* \param end end of the buffer
* \param pk the key to fill
*
* \return 0 if successful, or a specific PK error code
*/
int mbedtls_pk_parse_subpubkey( unsigned char **p, const unsigned char *end,
mbedtls_pk_context *pk );
#endif /* MBEDTLS_PK_PARSE_C */
#if defined(MBEDTLS_PK_WRITE_C)
/**
* \brief Write a subjectPublicKey to ASN.1 data
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param key public key to write away
*
* \return the length written or a negative error code
*/
int mbedtls_pk_write_pubkey( unsigned char **p, unsigned char *start,
const mbedtls_pk_context *key );
#endif /* MBEDTLS_PK_WRITE_C */
/*
* Internal module functions. You probably do not want to use these unless you
* know you do.
*/
#if defined(MBEDTLS_FS_IO)
int mbedtls_pk_load_file( const char *path, unsigned char **buf, size_t *n );
#endif
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_PK_H */
/**
* \file pk.h
*
* \brief Public Key abstraction layer: wrapper functions
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PK_WRAP_H
#define MBEDTLS_PK_WRAP_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "pk.h"
struct mbedtls_pk_info_t
{
/** Public key type */
mbedtls_pk_type_t type;
/** Type name */
const char *name;
/** Get key size in bits */
size_t (*get_bitlen)( const void * );
/** Tell if the context implements this type (e.g. ECKEY can do ECDSA) */
int (*can_do)( mbedtls_pk_type_t type );
/** Verify signature */
int (*verify_func)( void *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
const unsigned char *sig, size_t sig_len );
/** Make signature */
int (*sign_func)( void *ctx, mbedtls_md_type_t md_alg,
const unsigned char *hash, size_t hash_len,
unsigned char *sig, size_t *sig_len,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/** Decrypt message */
int (*decrypt_func)( void *ctx, const unsigned char *input, size_t ilen,
unsigned char *output, size_t *olen, size_t osize,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/** Encrypt message */
int (*encrypt_func)( void *ctx, const unsigned char *input, size_t ilen,
unsigned char *output, size_t *olen, size_t osize,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/** Check public-private key pair */
int (*check_pair_func)( const void *pub, const void *prv );
/** Allocate a new context */
void * (*ctx_alloc_func)( void );
/** Free the given context */
void (*ctx_free_func)( void *ctx );
/** Interface with the debug module */
void (*debug_func)( const void *ctx, mbedtls_pk_debug_item *items );
};
#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT)
/* Container for RSA-alt */
typedef struct
{
void *key;
mbedtls_pk_rsa_alt_decrypt_func decrypt_func;
mbedtls_pk_rsa_alt_sign_func sign_func;
mbedtls_pk_rsa_alt_key_len_func key_len_func;
} mbedtls_rsa_alt_context;
#endif
#if defined(MBEDTLS_RSA_C)
extern const mbedtls_pk_info_t mbedtls_rsa_info;
#endif
#if defined(MBEDTLS_ECP_C)
extern const mbedtls_pk_info_t mbedtls_eckey_info;
extern const mbedtls_pk_info_t mbedtls_eckeydh_info;
#endif
#if defined(MBEDTLS_ECDSA_C)
extern const mbedtls_pk_info_t mbedtls_ecdsa_info;
#endif
#if defined(MBEDTLS_PK_RSA_ALT_SUPPORT)
extern const mbedtls_pk_info_t mbedtls_rsa_alt_info;
#endif
#endif /* MBEDTLS_PK_WRAP_H */
/**
* \file pkcs11.h
*
* \brief Wrapper for PKCS#11 library libpkcs11-helper
*
* \author Adriaan de Jong <dejong@fox-it.com>
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PKCS11_H
#define MBEDTLS_PKCS11_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#if defined(MBEDTLS_PKCS11_C)
#include "x509_crt.h"
#include <pkcs11-helper-1.0/pkcs11h-certificate.h>
#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
!defined(inline) && !defined(__cplusplus)
#define inline __inline
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* Context for PKCS #11 private keys.
*/
typedef struct {
pkcs11h_certificate_t pkcs11h_cert;
int len;
} mbedtls_pkcs11_context;
/**
* Initialize a mbedtls_pkcs11_context.
* (Just making memory references valid.)
*/
void mbedtls_pkcs11_init( mbedtls_pkcs11_context *ctx );
/**
* Fill in a mbed TLS certificate, based on the given PKCS11 helper certificate.
*
* \param cert X.509 certificate to fill
* \param pkcs11h_cert PKCS #11 helper certificate
*
* \return 0 on success.
*/
int mbedtls_pkcs11_x509_cert_bind( mbedtls_x509_crt *cert, pkcs11h_certificate_t pkcs11h_cert );
/**
* Set up a mbedtls_pkcs11_context storing the given certificate. Note that the
* mbedtls_pkcs11_context will take over control of the certificate, freeing it when
* done.
*
* \param priv_key Private key structure to fill.
* \param pkcs11_cert PKCS #11 helper certificate
*
* \return 0 on success
*/
int mbedtls_pkcs11_priv_key_bind( mbedtls_pkcs11_context *priv_key,
pkcs11h_certificate_t pkcs11_cert );
/**
* Free the contents of the given private key context. Note that the structure
* itself is not freed.
*
* \param priv_key Private key structure to cleanup
*/
void mbedtls_pkcs11_priv_key_free( mbedtls_pkcs11_context *priv_key );
/**
* \brief Do an RSA private key decrypt, then remove the message
* padding
*
* \param ctx PKCS #11 context
* \param mode must be MBEDTLS_RSA_PRIVATE, for compatibility with rsa.c's signature
* \param input buffer holding the encrypted data
* \param output buffer that will hold the plaintext
* \param olen will contain the plaintext length
* \param output_max_len maximum length of the output buffer
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
* an error is thrown.
*/
int mbedtls_pkcs11_decrypt( mbedtls_pkcs11_context *ctx,
int mode, size_t *olen,
const unsigned char *input,
unsigned char *output,
size_t output_max_len );
/**
* \brief Do a private RSA to sign a message digest
*
* \param ctx PKCS #11 context
* \param mode must be MBEDTLS_RSA_PRIVATE, for compatibility with rsa.c's signature
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer that will hold the ciphertext
*
* \return 0 if the signing operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_pkcs11_sign( mbedtls_pkcs11_context *ctx,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
unsigned char *sig );
/**
* SSL/TLS wrappers for PKCS#11 functions
*/
static inline int mbedtls_ssl_pkcs11_decrypt( void *ctx, int mode, size_t *olen,
const unsigned char *input, unsigned char *output,
size_t output_max_len )
{
return mbedtls_pkcs11_decrypt( (mbedtls_pkcs11_context *) ctx, mode, olen, input, output,
output_max_len );
}
static inline int mbedtls_ssl_pkcs11_sign( void *ctx,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng,
int mode, mbedtls_md_type_t md_alg, unsigned int hashlen,
const unsigned char *hash, unsigned char *sig )
{
((void) f_rng);
((void) p_rng);
return mbedtls_pkcs11_sign( (mbedtls_pkcs11_context *) ctx, mode, md_alg,
hashlen, hash, sig );
}
static inline size_t mbedtls_ssl_pkcs11_key_len( void *ctx )
{
return ( (mbedtls_pkcs11_context *) ctx )->len;
}
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_PKCS11_C */
#endif /* MBEDTLS_PKCS11_H */
/**
* \file pkcs12.h
*
* \brief PKCS#12 Personal Information Exchange Syntax
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PKCS12_H
#define MBEDTLS_PKCS12_H
#include "md.h"
#include "cipher.h"
#include "asn1.h"
#include <stddef.h>
#define MBEDTLS_ERR_PKCS12_BAD_INPUT_DATA -0x1F80 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_PKCS12_FEATURE_UNAVAILABLE -0x1F00 /**< Feature not available, e.g. unsupported encryption scheme. */
#define MBEDTLS_ERR_PKCS12_PBE_INVALID_FORMAT -0x1E80 /**< PBE ASN.1 data not as expected. */
#define MBEDTLS_ERR_PKCS12_PASSWORD_MISMATCH -0x1E00 /**< Given private key password does not allow for correct decryption. */
#define MBEDTLS_PKCS12_DERIVE_KEY 1 /**< encryption/decryption key */
#define MBEDTLS_PKCS12_DERIVE_IV 2 /**< initialization vector */
#define MBEDTLS_PKCS12_DERIVE_MAC_KEY 3 /**< integrity / MAC key */
#define MBEDTLS_PKCS12_PBE_DECRYPT 0
#define MBEDTLS_PKCS12_PBE_ENCRYPT 1
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief PKCS12 Password Based function (encryption / decryption)
* for pbeWithSHAAnd128BitRC4
*
* \param pbe_params an ASN1 buffer containing the pkcs-12PbeParams structure
* \param mode either MBEDTLS_PKCS12_PBE_ENCRYPT or MBEDTLS_PKCS12_PBE_DECRYPT
* \param pwd the password used (may be NULL if no password is used)
* \param pwdlen length of the password (may be 0)
* \param input the input data
* \param len data length
* \param output the output buffer
*
* \return 0 if successful, or a MBEDTLS_ERR_XXX code
*/
int mbedtls_pkcs12_pbe_sha1_rc4_128( mbedtls_asn1_buf *pbe_params, int mode,
const unsigned char *pwd, size_t pwdlen,
const unsigned char *input, size_t len,
unsigned char *output );
/**
* \brief PKCS12 Password Based function (encryption / decryption)
* for cipher-based and mbedtls_md-based PBE's
*
* \param pbe_params an ASN1 buffer containing the pkcs-12PbeParams structure
* \param mode either MBEDTLS_PKCS12_PBE_ENCRYPT or MBEDTLS_PKCS12_PBE_DECRYPT
* \param cipher_type the cipher used
* \param md_type the mbedtls_md used
* \param pwd the password used (may be NULL if no password is used)
* \param pwdlen length of the password (may be 0)
* \param input the input data
* \param len data length
* \param output the output buffer
*
* \return 0 if successful, or a MBEDTLS_ERR_XXX code
*/
int mbedtls_pkcs12_pbe( mbedtls_asn1_buf *pbe_params, int mode,
mbedtls_cipher_type_t cipher_type, mbedtls_md_type_t md_type,
const unsigned char *pwd, size_t pwdlen,
const unsigned char *input, size_t len,
unsigned char *output );
/**
* \brief The PKCS#12 derivation function uses a password and a salt
* to produce pseudo-random bits for a particular "purpose".
*
* Depending on the given id, this function can produce an
* encryption/decryption key, an nitialization vector or an
* integrity key.
*
* \param data buffer to store the derived data in
* \param datalen length to fill
* \param pwd password to use (may be NULL if no password is used)
* \param pwdlen length of the password (may be 0)
* \param salt salt buffer to use
* \param saltlen length of the salt
* \param mbedtls_md mbedtls_md type to use during the derivation
* \param id id that describes the purpose (can be MBEDTLS_PKCS12_DERIVE_KEY,
* MBEDTLS_PKCS12_DERIVE_IV or MBEDTLS_PKCS12_DERIVE_MAC_KEY)
* \param iterations number of iterations
*
* \return 0 if successful, or a MD, BIGNUM type error.
*/
int mbedtls_pkcs12_derivation( unsigned char *data, size_t datalen,
const unsigned char *pwd, size_t pwdlen,
const unsigned char *salt, size_t saltlen,
mbedtls_md_type_t mbedtls_md, int id, int iterations );
#ifdef __cplusplus
}
#endif
#endif /* pkcs12.h */
/**
* \file pkcs5.h
*
* \brief PKCS#5 functions
*
* \author Mathias Olsson <mathias@kompetensum.com>
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PKCS5_H
#define MBEDTLS_PKCS5_H
#include "asn1.h"
#include "md.h"
#include <stddef.h>
#include <stdint.h>
#define MBEDTLS_ERR_PKCS5_BAD_INPUT_DATA -0x2f80 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_PKCS5_INVALID_FORMAT -0x2f00 /**< Unexpected ASN.1 data. */
#define MBEDTLS_ERR_PKCS5_FEATURE_UNAVAILABLE -0x2e80 /**< Requested encryption or digest alg not available. */
#define MBEDTLS_ERR_PKCS5_PASSWORD_MISMATCH -0x2e00 /**< Given private key password does not allow for correct decryption. */
#define MBEDTLS_PKCS5_DECRYPT 0
#define MBEDTLS_PKCS5_ENCRYPT 1
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief PKCS#5 PBES2 function
*
* \param pbe_params the ASN.1 algorithm parameters
* \param mode either MBEDTLS_PKCS5_DECRYPT or MBEDTLS_PKCS5_ENCRYPT
* \param pwd password to use when generating key
* \param pwdlen length of password
* \param data data to process
* \param datalen length of data
* \param output output buffer
*
* \returns 0 on success, or a MBEDTLS_ERR_XXX code if verification fails.
*/
int mbedtls_pkcs5_pbes2( const mbedtls_asn1_buf *pbe_params, int mode,
const unsigned char *pwd, size_t pwdlen,
const unsigned char *data, size_t datalen,
unsigned char *output );
/**
* \brief PKCS#5 PBKDF2 using HMAC
*
* \param ctx Generic HMAC context
* \param password Password to use when generating key
* \param plen Length of password
* \param salt Salt to use when generating key
* \param slen Length of salt
* \param iteration_count Iteration count
* \param key_length Length of generated key in bytes
* \param output Generated key. Must be at least as big as key_length
*
* \returns 0 on success, or a MBEDTLS_ERR_XXX code if verification fails.
*/
int mbedtls_pkcs5_pbkdf2_hmac( mbedtls_md_context_t *ctx, const unsigned char *password,
size_t plen, const unsigned char *salt, size_t slen,
unsigned int iteration_count,
uint32_t key_length, unsigned char *output );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_pkcs5_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* pkcs5.h */
/**
* \file platform.h
*
* \brief mbed TLS Platform abstraction layer
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_PLATFORM_H
#define MBEDTLS_PLATFORM_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* \name SECTION: Module settings
*
* The configuration options you can set for this module are in this section.
* Either change them in config.h or define them on the compiler command line.
* \{
*/
extern int ets_snprintf(char *buf, unsigned int size, const char *format, ...);
extern void *pvPortCalloc(unsigned int count, unsigned int size);
extern void vPortFree( void *pv );
#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
#if !defined(MBEDTLS_PLATFORM_NO_STD_FUNCTIONS)
#include <stdio.h>
#include <stdlib.h>
#if !defined(MBEDTLS_PLATFORM_STD_SNPRINTF)
#if defined(_WIN32)
#define MBEDTLS_PLATFORM_STD_SNPRINTF mbedtls_platform_win32_snprintf /**< Default snprintf to use */
#else
#define MBEDTLS_PLATFORM_STD_SNPRINTF ets_snprintf /**< Default snprintf to use */
#endif
#endif
#if !defined(MBEDTLS_PLATFORM_STD_PRINTF)
#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use */
#endif
#if !defined(MBEDTLS_PLATFORM_STD_FPRINTF)
#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use */
#endif
#if !defined(MBEDTLS_PLATFORM_STD_CALLOC)
#define MBEDTLS_PLATFORM_STD_CALLOC pvPortCalloc /**< Default allocator to use */
#endif
#if !defined(MBEDTLS_PLATFORM_STD_FREE)
#define MBEDTLS_PLATFORM_STD_FREE vPortFree /**< Default free to use */
#endif
#if !defined(MBEDTLS_PLATFORM_STD_EXIT)
#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default free to use */
#endif
#else /* MBEDTLS_PLATFORM_NO_STD_FUNCTIONS */
#if defined(MBEDTLS_PLATFORM_STD_MEM_HDR)
#include MBEDTLS_PLATFORM_STD_MEM_HDR
#endif
#endif /* MBEDTLS_PLATFORM_NO_STD_FUNCTIONS */
/* \} name SECTION: Module settings */
/*
* The function pointers for calloc and free
*/
#if defined(MBEDTLS_PLATFORM_MEMORY)
#if defined(MBEDTLS_PLATFORM_FREE_MACRO) && \
defined(MBEDTLS_PLATFORM_CALLOC_MACRO)
#define mbedtls_free MBEDTLS_PLATFORM_FREE_MACRO
#define mbedtls_calloc MBEDTLS_PLATFORM_CALLOC_MACRO
#else
/* For size_t */
#include <stddef.h>
extern void * (*mbedtls_calloc)( size_t n, size_t size );
extern void (*mbedtls_free)( void *ptr );
/**
* \brief Set your own memory implementation function pointers
*
* \param calloc_func the calloc function implementation
* \param free_func the free function implementation
*
* \return 0 if successful
*/
int mbedtls_platform_set_calloc_free( void * (*calloc_func)( size_t, size_t ),
void (*free_func)( void * ) );
#endif /* MBEDTLS_PLATFORM_FREE_MACRO && MBEDTLS_PLATFORM_CALLOC_MACRO */
#else /* !MBEDTLS_PLATFORM_MEMORY */
#define mbedtls_free vPortFree
#define mbedtls_calloc pvPortCalloc
#endif /* MBEDTLS_PLATFORM_MEMORY && !MBEDTLS_PLATFORM_{FREE,CALLOC}_MACRO */
/*
* The function pointers for fprintf
*/
#if defined(MBEDTLS_PLATFORM_FPRINTF_ALT)
/* We need FILE * */
#include <stdio.h>
extern int (*mbedtls_fprintf)( FILE *stream, const char *format, ... );
/**
* \brief Set your own fprintf function pointer
*
* \param fprintf_func the fprintf function implementation
*
* \return 0
*/
int mbedtls_platform_set_fprintf( int (*fprintf_func)( FILE *stream, const char *,
... ) );
#else
#if defined(MBEDTLS_PLATFORM_FPRINTF_MACRO)
#define mbedtls_fprintf MBEDTLS_PLATFORM_FPRINTF_MACRO
#else
#define mbedtls_fprintf fprintf
#endif /* MBEDTLS_PLATFORM_FPRINTF_MACRO */
#endif /* MBEDTLS_PLATFORM_FPRINTF_ALT */
/*
* The function pointers for printf
*/
#if defined(MBEDTLS_PLATFORM_PRINTF_ALT)
extern int (*mbedtls_printf)( const char *format, ... );
/**
* \brief Set your own printf function pointer
*
* \param printf_func the printf function implementation
*
* \return 0
*/
int mbedtls_platform_set_printf( int (*printf_func)( const char *, ... ) );
#else /* !MBEDTLS_PLATFORM_PRINTF_ALT */
#if defined(MBEDTLS_PLATFORM_PRINTF_MACRO)
#define mbedtls_printf MBEDTLS_PLATFORM_PRINTF_MACRO
#else
#define mbedtls_printf os_printf
#endif /* MBEDTLS_PLATFORM_PRINTF_MACRO */
#endif /* MBEDTLS_PLATFORM_PRINTF_ALT */
/*
* The function pointers for snprintf
*
* The snprintf implementation should conform to C99:
* - it *must* always correctly zero-terminate the buffer
* (except when n == 0, then it must leave the buffer untouched)
* - however it is acceptable to return -1 instead of the required length when
* the destination buffer is too short.
*/
#if defined(_WIN32)
/* For Windows (inc. MSYS2), we provide our own fixed implementation */
int mbedtls_platform_win32_snprintf( char *s, size_t n, const char *fmt, ... );
#endif
#if defined(MBEDTLS_PLATFORM_SNPRINTF_ALT)
extern int (*mbedtls_snprintf)( char * s, size_t n, const char * format, ... );
/**
* \brief Set your own snprintf function pointer
*
* \param snprintf_func the snprintf function implementation
*
* \return 0
*/
int mbedtls_platform_set_snprintf( int (*snprintf_func)( char * s, size_t n,
const char * format, ... ) );
#else /* MBEDTLS_PLATFORM_SNPRINTF_ALT */
#if defined(MBEDTLS_PLATFORM_SNPRINTF_MACRO)
#define mbedtls_snprintf MBEDTLS_PLATFORM_SNPRINTF_MACRO
#else
#define mbedtls_snprintf ets_snprintf
#endif /* MBEDTLS_PLATFORM_SNPRINTF_MACRO */
#endif /* MBEDTLS_PLATFORM_SNPRINTF_ALT */
/*
* The function pointers for exit
*/
#if defined(MBEDTLS_PLATFORM_EXIT_ALT)
extern void (*mbedtls_exit)( int status );
/**
* \brief Set your own exit function pointer
*
* \param exit_func the exit function implementation
*
* \return 0
*/
int mbedtls_platform_set_exit( void (*exit_func)( int status ) );
#else
#if defined(MBEDTLS_PLATFORM_EXIT_MACRO)
#define mbedtls_exit MBEDTLS_PLATFORM_EXIT_MACRO
#else
#define mbedtls_exit exit
#endif /* MBEDTLS_PLATFORM_EXIT_MACRO */
#endif /* MBEDTLS_PLATFORM_EXIT_ALT */
#ifdef __cplusplus
}
#endif
#endif /* platform.h */
/**
* \file ripemd160.h
*
* \brief RIPE MD-160 message digest
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_RIPEMD160_H
#define MBEDTLS_RIPEMD160_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#if !defined(MBEDTLS_RIPEMD160_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief RIPEMD-160 context structure
*/
typedef struct
{
uint32_t total[2]; /*!< number of bytes processed */
uint32_t state[5]; /*!< intermediate digest state */
unsigned char buffer[64]; /*!< data block being processed */
}
mbedtls_ripemd160_context;
/**
* \brief Initialize RIPEMD-160 context
*
* \param ctx RIPEMD-160 context to be initialized
*/
void mbedtls_ripemd160_init( mbedtls_ripemd160_context *ctx );
/**
* \brief Clear RIPEMD-160 context
*
* \param ctx RIPEMD-160 context to be cleared
*/
void mbedtls_ripemd160_free( mbedtls_ripemd160_context *ctx );
/**
* \brief Clone (the state of) an RIPEMD-160 context
*
* \param dst The destination context
* \param src The context to be cloned
*/
void mbedtls_ripemd160_clone( mbedtls_ripemd160_context *dst,
const mbedtls_ripemd160_context *src );
/**
* \brief RIPEMD-160 context setup
*
* \param ctx context to be initialized
*/
void mbedtls_ripemd160_starts( mbedtls_ripemd160_context *ctx );
/**
* \brief RIPEMD-160 process buffer
*
* \param ctx RIPEMD-160 context
* \param input buffer holding the data
* \param ilen length of the input data
*/
void mbedtls_ripemd160_update( mbedtls_ripemd160_context *ctx,
const unsigned char *input, size_t ilen );
/**
* \brief RIPEMD-160 final digest
*
* \param ctx RIPEMD-160 context
* \param output RIPEMD-160 checksum result
*/
void mbedtls_ripemd160_finish( mbedtls_ripemd160_context *ctx, unsigned char output[20] );
/* Internal use */
void mbedtls_ripemd160_process( mbedtls_ripemd160_context *ctx, const unsigned char data[64] );
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_RIPEMD160_ALT */
#include "ripemd160.h"
#endif /* MBEDTLS_RIPEMD160_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Output = RIPEMD-160( input buffer )
*
* \param input buffer holding the data
* \param ilen length of the input data
* \param output RIPEMD-160 checksum result
*/
void mbedtls_ripemd160( const unsigned char *input, size_t ilen,
unsigned char output[20] );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_ripemd160_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_ripemd160.h */
/**
* \file rsa.h
*
* \brief The RSA public-key cryptosystem
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_RSA_H
#define MBEDTLS_RSA_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "bignum.h"
#include "md.h"
#if defined(MBEDTLS_THREADING_C)
#include "threading.h"
#endif
/*
* RSA Error codes
*/
#define MBEDTLS_ERR_RSA_BAD_INPUT_DATA -0x4080 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_RSA_INVALID_PADDING -0x4100 /**< Input data contains invalid padding and is rejected. */
#define MBEDTLS_ERR_RSA_KEY_GEN_FAILED -0x4180 /**< Something failed during generation of a key. */
#define MBEDTLS_ERR_RSA_KEY_CHECK_FAILED -0x4200 /**< Key failed to pass the library's validity check. */
#define MBEDTLS_ERR_RSA_PUBLIC_FAILED -0x4280 /**< The public key operation failed. */
#define MBEDTLS_ERR_RSA_PRIVATE_FAILED -0x4300 /**< The private key operation failed. */
#define MBEDTLS_ERR_RSA_VERIFY_FAILED -0x4380 /**< The PKCS#1 verification failed. */
#define MBEDTLS_ERR_RSA_OUTPUT_TOO_LARGE -0x4400 /**< The output buffer for decryption is not large enough. */
#define MBEDTLS_ERR_RSA_RNG_FAILED -0x4480 /**< The random generator failed to generate non-zeros. */
/*
* RSA constants
*/
#define MBEDTLS_RSA_PUBLIC 0
#define MBEDTLS_RSA_PRIVATE 1
#define MBEDTLS_RSA_PKCS_V15 0
#define MBEDTLS_RSA_PKCS_V21 1
#define MBEDTLS_RSA_SIGN 1
#define MBEDTLS_RSA_CRYPT 2
#define MBEDTLS_RSA_SALT_LEN_ANY -1
/*
* The above constants may be used even if the RSA module is compile out,
* eg for alternative (PKCS#11) RSA implemenations in the PK layers.
*/
#if defined(MBEDTLS_RSA_C)
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief RSA context structure
*/
typedef struct
{
int ver; /*!< always 0 */
size_t len; /*!< size(N) in chars */
mbedtls_mpi N; /*!< public modulus */
mbedtls_mpi E; /*!< public exponent */
mbedtls_mpi D; /*!< private exponent */
mbedtls_mpi P; /*!< 1st prime factor */
mbedtls_mpi Q; /*!< 2nd prime factor */
mbedtls_mpi DP; /*!< D % (P - 1) */
mbedtls_mpi DQ; /*!< D % (Q - 1) */
mbedtls_mpi QP; /*!< 1 / (Q % P) */
mbedtls_mpi RN; /*!< cached R^2 mod N */
mbedtls_mpi RP; /*!< cached R^2 mod P */
mbedtls_mpi RQ; /*!< cached R^2 mod Q */
mbedtls_mpi Vi; /*!< cached blinding value */
mbedtls_mpi Vf; /*!< cached un-blinding value */
int padding; /*!< MBEDTLS_RSA_PKCS_V15 for 1.5 padding and
RSA_PKCS_v21 for OAEP/PSS */
int hash_id; /*!< Hash identifier of mbedtls_md_type_t as
specified in the mbedtls_md.h header file
for the EME-OAEP and EMSA-PSS
encoding */
#if defined(MBEDTLS_THREADING_C)
mbedtls_threading_mutex_t mutex; /*!< Thread-safety mutex */
#endif
}
mbedtls_rsa_context;
/**
* \brief Initialize an RSA context
*
* Note: Set padding to MBEDTLS_RSA_PKCS_V21 for the RSAES-OAEP
* encryption scheme and the RSASSA-PSS signature scheme.
*
* \param ctx RSA context to be initialized
* \param padding MBEDTLS_RSA_PKCS_V15 or MBEDTLS_RSA_PKCS_V21
* \param hash_id MBEDTLS_RSA_PKCS_V21 hash identifier
*
* \note The hash_id parameter is actually ignored
* when using MBEDTLS_RSA_PKCS_V15 padding.
*
* \note Choice of padding mode is strictly enforced for private key
* operations, since there might be security concerns in
* mixing padding modes. For public key operations it's merely
* a default value, which can be overriden by calling specific
* rsa_rsaes_xxx or rsa_rsassa_xxx functions.
*
* \note The chosen hash is always used for OEAP encryption.
* For PSS signatures, it's always used for making signatures,
* but can be overriden (and always is, if set to
* MBEDTLS_MD_NONE) for verifying them.
*/
void mbedtls_rsa_init( mbedtls_rsa_context *ctx,
int padding,
int hash_id);
/**
* \brief Set padding for an already initialized RSA context
* See \c mbedtls_rsa_init() for details.
*
* \param ctx RSA context to be set
* \param padding MBEDTLS_RSA_PKCS_V15 or MBEDTLS_RSA_PKCS_V21
* \param hash_id MBEDTLS_RSA_PKCS_V21 hash identifier
*/
void mbedtls_rsa_set_padding( mbedtls_rsa_context *ctx, int padding, int hash_id);
/**
* \brief Generate an RSA keypair
*
* \param ctx RSA context that will hold the key
* \param f_rng RNG function
* \param p_rng RNG parameter
* \param nbits size of the public key in bits
* \param exponent public exponent (e.g., 65537)
*
* \note mbedtls_rsa_init() must be called beforehand to setup
* the RSA context.
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*/
int mbedtls_rsa_gen_key( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
unsigned int nbits, int exponent );
/**
* \brief Check a public RSA key
*
* \param ctx RSA context to be checked
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*/
int mbedtls_rsa_check_pubkey( const mbedtls_rsa_context *ctx );
/**
* \brief Check a private RSA key
*
* \param ctx RSA context to be checked
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*/
int mbedtls_rsa_check_privkey( const mbedtls_rsa_context *ctx );
/**
* \brief Check a public-private RSA key pair.
* Check each of the contexts, and make sure they match.
*
* \param pub RSA context holding the public key
* \param prv RSA context holding the private key
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*/
int mbedtls_rsa_check_pub_priv( const mbedtls_rsa_context *pub, const mbedtls_rsa_context *prv );
/**
* \brief Do an RSA public key operation
*
* \param ctx RSA context
* \param input input buffer
* \param output output buffer
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note This function does NOT take care of message
* padding. Also, be sure to set input[0] = 0 or assure that
* input is smaller than N.
*
* \note The input and output buffers must be large
* enough (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_public( mbedtls_rsa_context *ctx,
const unsigned char *input,
unsigned char *output );
/**
* \brief Do an RSA private key operation
*
* \param ctx RSA context
* \param f_rng RNG function (Needed for blinding)
* \param p_rng RNG parameter
* \param input input buffer
* \param output output buffer
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The input and output buffers must be large
* enough (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_private( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
const unsigned char *input,
unsigned char *output );
/**
* \brief Generic wrapper to perform a PKCS#1 encryption using the
* mode from the context. Add the message padding, then do an
* RSA operation.
*
* \param ctx RSA context
* \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding
* and MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param ilen contains the plaintext length
* \param input buffer holding the data to be encrypted
* \param output buffer that will hold the ciphertext
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_pkcs1_encrypt( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode, size_t ilen,
const unsigned char *input,
unsigned char *output );
/**
* \brief Perform a PKCS#1 v1.5 encryption (RSAES-PKCS1-v1_5-ENCRYPT)
*
* \param ctx RSA context
* \param f_rng RNG function (Needed for padding and MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param ilen contains the plaintext length
* \param input buffer holding the data to be encrypted
* \param output buffer that will hold the ciphertext
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_rsaes_pkcs1_v15_encrypt( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode, size_t ilen,
const unsigned char *input,
unsigned char *output );
/**
* \brief Perform a PKCS#1 v2.1 OAEP encryption (RSAES-OAEP-ENCRYPT)
*
* \param ctx RSA context
* \param f_rng RNG function (Needed for padding and PKCS#1 v2.1 encoding
* and MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param label buffer holding the custom label to use
* \param label_len contains the label length
* \param ilen contains the plaintext length
* \param input buffer holding the data to be encrypted
* \param output buffer that will hold the ciphertext
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_rsaes_oaep_encrypt( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
const unsigned char *label, size_t label_len,
size_t ilen,
const unsigned char *input,
unsigned char *output );
/**
* \brief Generic wrapper to perform a PKCS#1 decryption using the
* mode from the context. Do an RSA operation, then remove
* the message padding
*
* \param ctx RSA context
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param olen will contain the plaintext length
* \param input buffer holding the encrypted data
* \param output buffer that will hold the plaintext
* \param output_max_len maximum length of the output buffer
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
* an error is thrown.
*/
int mbedtls_rsa_pkcs1_decrypt( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode, size_t *olen,
const unsigned char *input,
unsigned char *output,
size_t output_max_len );
/**
* \brief Perform a PKCS#1 v1.5 decryption (RSAES-PKCS1-v1_5-DECRYPT)
*
* \param ctx RSA context
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param olen will contain the plaintext length
* \param input buffer holding the encrypted data
* \param output buffer that will hold the plaintext
* \param output_max_len maximum length of the output buffer
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
* an error is thrown.
*/
int mbedtls_rsa_rsaes_pkcs1_v15_decrypt( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode, size_t *olen,
const unsigned char *input,
unsigned char *output,
size_t output_max_len );
/**
* \brief Perform a PKCS#1 v2.1 OAEP decryption (RSAES-OAEP-DECRYPT)
*
* \param ctx RSA context
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param label buffer holding the custom label to use
* \param label_len contains the label length
* \param olen will contain the plaintext length
* \param input buffer holding the encrypted data
* \param output buffer that will hold the plaintext
* \param output_max_len maximum length of the output buffer
*
* \return 0 if successful, or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The output buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used) otherwise
* an error is thrown.
*/
int mbedtls_rsa_rsaes_oaep_decrypt( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
const unsigned char *label, size_t label_len,
size_t *olen,
const unsigned char *input,
unsigned char *output,
size_t output_max_len );
/**
* \brief Generic wrapper to perform a PKCS#1 signature using the
* mode from the context. Do a private RSA operation to sign
* a message digest
*
* \param ctx RSA context
* \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding and for
* MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer that will hold the ciphertext
*
* \return 0 if the signing operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*
* \note In case of PKCS#1 v2.1 encoding, see comments on
* \note \c mbedtls_rsa_rsassa_pss_sign() for details on md_alg and hash_id.
*/
int mbedtls_rsa_pkcs1_sign( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
unsigned char *sig );
/**
* \brief Perform a PKCS#1 v1.5 signature (RSASSA-PKCS1-v1_5-SIGN)
*
* \param ctx RSA context
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer that will hold the ciphertext
*
* \return 0 if the signing operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_rsassa_pkcs1_v15_sign( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
unsigned char *sig );
/**
* \brief Perform a PKCS#1 v2.1 PSS signature (RSASSA-PSS-SIGN)
*
* \param ctx RSA context
* \param f_rng RNG function (Needed for PKCS#1 v2.1 encoding and for
* MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer that will hold the ciphertext
*
* \return 0 if the signing operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*
* \note The hash_id in the RSA context is the one used for the
* encoding. md_alg in the function call is the type of hash
* that is encoded. According to RFC 3447 it is advised to
* keep both hashes the same.
*/
int mbedtls_rsa_rsassa_pss_sign( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
unsigned char *sig );
/**
* \brief Generic wrapper to perform a PKCS#1 verification using the
* mode from the context. Do a public RSA operation and check
* the message digest
*
* \param ctx points to an RSA public key
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer holding the ciphertext
*
* \return 0 if the verify operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*
* \note In case of PKCS#1 v2.1 encoding, see comments on
* \c mbedtls_rsa_rsassa_pss_verify() about md_alg and hash_id.
*/
int mbedtls_rsa_pkcs1_verify( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
const unsigned char *sig );
/**
* \brief Perform a PKCS#1 v1.5 verification (RSASSA-PKCS1-v1_5-VERIFY)
*
* \param ctx points to an RSA public key
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer holding the ciphertext
*
* \return 0 if the verify operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*/
int mbedtls_rsa_rsassa_pkcs1_v15_verify( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
const unsigned char *sig );
/**
* \brief Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY)
* (This is the "simple" version.)
*
* \param ctx points to an RSA public key
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param sig buffer holding the ciphertext
*
* \return 0 if the verify operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*
* \note The hash_id in the RSA context is the one used for the
* verification. md_alg in the function call is the type of
* hash that is verified. According to RFC 3447 it is advised to
* keep both hashes the same. If hash_id in the RSA context is
* unset, the md_alg from the function call is used.
*/
int mbedtls_rsa_rsassa_pss_verify( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
const unsigned char *sig );
/**
* \brief Perform a PKCS#1 v2.1 PSS verification (RSASSA-PSS-VERIFY)
* (This is the version with "full" options.)
*
* \param ctx points to an RSA public key
* \param f_rng RNG function (Only needed for MBEDTLS_RSA_PRIVATE)
* \param p_rng RNG parameter
* \param mode MBEDTLS_RSA_PUBLIC or MBEDTLS_RSA_PRIVATE
* \param md_alg a MBEDTLS_MD_XXX (use MBEDTLS_MD_NONE for signing raw data)
* \param hashlen message digest length (for MBEDTLS_MD_NONE only)
* \param hash buffer holding the message digest
* \param mgf1_hash_id message digest used for mask generation
* \param expected_salt_len Length of the salt used in padding, use
* MBEDTLS_RSA_SALT_LEN_ANY to accept any salt length
* \param sig buffer holding the ciphertext
*
* \return 0 if the verify operation was successful,
* or an MBEDTLS_ERR_RSA_XXX error code
*
* \note The "sig" buffer must be as large as the size
* of ctx->N (eg. 128 bytes if RSA-1024 is used).
*
* \note The hash_id in the RSA context is ignored.
*/
int mbedtls_rsa_rsassa_pss_verify_ext( mbedtls_rsa_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng,
int mode,
mbedtls_md_type_t md_alg,
unsigned int hashlen,
const unsigned char *hash,
mbedtls_md_type_t mgf1_hash_id,
int expected_salt_len,
const unsigned char *sig );
/**
* \brief Copy the components of an RSA context
*
* \param dst Destination context
* \param src Source context
*
* \return 0 on success,
* MBEDTLS_ERR_MPI_ALLOC_FAILED on memory allocation failure
*/
int mbedtls_rsa_copy( mbedtls_rsa_context *dst, const mbedtls_rsa_context *src );
/**
* \brief Free the components of an RSA key
*
* \param ctx RSA Context to free
*/
void mbedtls_rsa_free( mbedtls_rsa_context *ctx );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_rsa_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_RSA_C */
#endif /* rsa.h */
/**
* \file sha1.h
*
* \brief SHA-1 cryptographic hash function
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SHA1_H
#define MBEDTLS_SHA1_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#if !defined(MBEDTLS_SHA1_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief SHA-1 context structure
*/
typedef struct
{
uint32_t total[2]; /*!< number of bytes processed */
uint32_t state[5]; /*!< intermediate digest state */
unsigned char buffer[64]; /*!< data block being processed */
}
mbedtls_sha1_context;
/**
* \brief Initialize SHA-1 context
*
* \param ctx SHA-1 context to be initialized
*/
void mbedtls_sha1_init( mbedtls_sha1_context *ctx );
/**
* \brief Clear SHA-1 context
*
* \param ctx SHA-1 context to be cleared
*/
void mbedtls_sha1_free( mbedtls_sha1_context *ctx );
/**
* \brief Clone (the state of) a SHA-1 context
*
* \param dst The destination context
* \param src The context to be cloned
*/
void mbedtls_sha1_clone( mbedtls_sha1_context *dst,
const mbedtls_sha1_context *src );
/**
* \brief SHA-1 context setup
*
* \param ctx context to be initialized
*/
void mbedtls_sha1_starts( mbedtls_sha1_context *ctx );
/**
* \brief SHA-1 process buffer
*
* \param ctx SHA-1 context
* \param input buffer holding the data
* \param ilen length of the input data
*/
void mbedtls_sha1_update( mbedtls_sha1_context *ctx, const unsigned char *input, size_t ilen );
/**
* \brief SHA-1 final digest
*
* \param ctx SHA-1 context
* \param output SHA-1 checksum result
*/
void mbedtls_sha1_finish( mbedtls_sha1_context *ctx, unsigned char output[20] );
/* Internal use */
void mbedtls_sha1_process( mbedtls_sha1_context *ctx, const unsigned char data[64] );
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_SHA1_ALT */
#include "sha1_alt.h"
#endif /* MBEDTLS_SHA1_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Output = SHA-1( input buffer )
*
* \param input buffer holding the data
* \param ilen length of the input data
* \param output SHA-1 checksum result
*/
void mbedtls_sha1( const unsigned char *input, size_t ilen, unsigned char output[20] );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_sha1_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_sha1.h */
/**
* \file sha256.h
*
* \brief SHA-224 and SHA-256 cryptographic hash function
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SHA256_H
#define MBEDTLS_SHA256_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#if !defined(MBEDTLS_SHA256_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief SHA-256 context structure
*/
typedef struct
{
uint32_t total[2]; /*!< number of bytes processed */
uint32_t state[8]; /*!< intermediate digest state */
unsigned char buffer[64]; /*!< data block being processed */
int is224; /*!< 0 => SHA-256, else SHA-224 */
}
mbedtls_sha256_context;
/**
* \brief Initialize SHA-256 context
*
* \param ctx SHA-256 context to be initialized
*/
void mbedtls_sha256_init( mbedtls_sha256_context *ctx );
/**
* \brief Clear SHA-256 context
*
* \param ctx SHA-256 context to be cleared
*/
void mbedtls_sha256_free( mbedtls_sha256_context *ctx );
/**
* \brief Clone (the state of) a SHA-256 context
*
* \param dst The destination context
* \param src The context to be cloned
*/
void mbedtls_sha256_clone( mbedtls_sha256_context *dst,
const mbedtls_sha256_context *src );
/**
* \brief SHA-256 context setup
*
* \param ctx context to be initialized
* \param is224 0 = use SHA256, 1 = use SHA224
*/
void mbedtls_sha256_starts( mbedtls_sha256_context *ctx, int is224 );
/**
* \brief SHA-256 process buffer
*
* \param ctx SHA-256 context
* \param input buffer holding the data
* \param ilen length of the input data
*/
void mbedtls_sha256_update( mbedtls_sha256_context *ctx, const unsigned char *input,
size_t ilen );
/**
* \brief SHA-256 final digest
*
* \param ctx SHA-256 context
* \param output SHA-224/256 checksum result
*/
void mbedtls_sha256_finish( mbedtls_sha256_context *ctx, unsigned char output[32] );
/* Internal use */
void mbedtls_sha256_process( mbedtls_sha256_context *ctx, const unsigned char data[64] );
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_SHA256_ALT */
#include "sha256_alt.h"
#endif /* MBEDTLS_SHA256_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Output = SHA-256( input buffer )
*
* \param input buffer holding the data
* \param ilen length of the input data
* \param output SHA-224/256 checksum result
* \param is224 0 = use SHA256, 1 = use SHA224
*/
void mbedtls_sha256( const unsigned char *input, size_t ilen,
unsigned char output[32], int is224 );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_sha256_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_sha256.h */
/**
* \file sha512.h
*
* \brief SHA-384 and SHA-512 cryptographic hash function
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SHA512_H
#define MBEDTLS_SHA512_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#if !defined(MBEDTLS_SHA512_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief SHA-512 context structure
*/
typedef struct
{
uint64_t total[2]; /*!< number of bytes processed */
uint64_t state[8]; /*!< intermediate digest state */
unsigned char buffer[128]; /*!< data block being processed */
int is384; /*!< 0 => SHA-512, else SHA-384 */
}
mbedtls_sha512_context;
/**
* \brief Initialize SHA-512 context
*
* \param ctx SHA-512 context to be initialized
*/
void mbedtls_sha512_init( mbedtls_sha512_context *ctx );
/**
* \brief Clear SHA-512 context
*
* \param ctx SHA-512 context to be cleared
*/
void mbedtls_sha512_free( mbedtls_sha512_context *ctx );
/**
* \brief Clone (the state of) a SHA-512 context
*
* \param dst The destination context
* \param src The context to be cloned
*/
void mbedtls_sha512_clone( mbedtls_sha512_context *dst,
const mbedtls_sha512_context *src );
/**
* \brief SHA-512 context setup
*
* \param ctx context to be initialized
* \param is384 0 = use SHA512, 1 = use SHA384
*/
void mbedtls_sha512_starts( mbedtls_sha512_context *ctx, int is384 );
/**
* \brief SHA-512 process buffer
*
* \param ctx SHA-512 context
* \param input buffer holding the data
* \param ilen length of the input data
*/
void mbedtls_sha512_update( mbedtls_sha512_context *ctx, const unsigned char *input,
size_t ilen );
/**
* \brief SHA-512 final digest
*
* \param ctx SHA-512 context
* \param output SHA-384/512 checksum result
*/
void mbedtls_sha512_finish( mbedtls_sha512_context *ctx, unsigned char output[64] );
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_SHA512_ALT */
#include "sha512_alt.h"
#endif /* MBEDTLS_SHA512_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Output = SHA-512( input buffer )
*
* \param input buffer holding the data
* \param ilen length of the input data
* \param output SHA-384/512 checksum result
* \param is384 0 = use SHA512, 1 = use SHA384
*/
void mbedtls_sha512( const unsigned char *input, size_t ilen,
unsigned char output[64], int is384 );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_sha512_self_test( int verbose );
/* Internal use */
void mbedtls_sha512_process( mbedtls_sha512_context *ctx, const unsigned char data[128] );
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_sha512.h */
/**
* \file ssl.h
*
* \brief SSL/TLS functions.
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SSL_H
#define MBEDTLS_SSL_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "bignum.h"
#include "ecp.h"
#include "ssl_ciphersuites.h"
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#include "x509_crt.h"
#include "x509_crl.h"
#endif
#if defined(MBEDTLS_DHM_C)
#include "dhm.h"
#endif
#if defined(MBEDTLS_ECDH_C)
#include "ecdh.h"
#endif
#if defined(MBEDTLS_ZLIB_SUPPORT)
#include "zlib.h"
#endif
#if defined(MBEDTLS_HAVE_TIME)
#include <time.h>
#endif
/*
* SSL Error codes
*/
#define MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE -0x7080 /**< The requested feature is not available. */
#define MBEDTLS_ERR_SSL_BAD_INPUT_DATA -0x7100 /**< Bad input parameters to function. */
#define MBEDTLS_ERR_SSL_INVALID_MAC -0x7180 /**< Verification of the message MAC failed. */
#define MBEDTLS_ERR_SSL_INVALID_RECORD -0x7200 /**< An invalid SSL record was received. */
#define MBEDTLS_ERR_SSL_CONN_EOF -0x7280 /**< The connection indicated an EOF. */
#define MBEDTLS_ERR_SSL_UNKNOWN_CIPHER -0x7300 /**< An unknown cipher was received. */
#define MBEDTLS_ERR_SSL_NO_CIPHER_CHOSEN -0x7380 /**< The server has no ciphersuites in common with the client. */
#define MBEDTLS_ERR_SSL_NO_RNG -0x7400 /**< No RNG was provided to the SSL module. */
#define MBEDTLS_ERR_SSL_NO_CLIENT_CERTIFICATE -0x7480 /**< No client certification received from the client, but required by the authentication mode. */
#define MBEDTLS_ERR_SSL_CERTIFICATE_TOO_LARGE -0x7500 /**< Our own certificate(s) is/are too large to send in an SSL message. */
#define MBEDTLS_ERR_SSL_CERTIFICATE_REQUIRED -0x7580 /**< The own certificate is not set, but needed by the server. */
#define MBEDTLS_ERR_SSL_PRIVATE_KEY_REQUIRED -0x7600 /**< The own private key or pre-shared key is not set, but needed. */
#define MBEDTLS_ERR_SSL_CA_CHAIN_REQUIRED -0x7680 /**< No CA Chain is set, but required to operate. */
#define MBEDTLS_ERR_SSL_UNEXPECTED_MESSAGE -0x7700 /**< An unexpected message was received from our peer. */
#define MBEDTLS_ERR_SSL_FATAL_ALERT_MESSAGE -0x7780 /**< A fatal alert message was received from our peer. */
#define MBEDTLS_ERR_SSL_PEER_VERIFY_FAILED -0x7800 /**< Verification of our peer failed. */
#define MBEDTLS_ERR_SSL_PEER_CLOSE_NOTIFY -0x7880 /**< The peer notified us that the connection is going to be closed. */
#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_HELLO -0x7900 /**< Processing of the ClientHello handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO -0x7980 /**< Processing of the ServerHello handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE -0x7A00 /**< Processing of the Certificate handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST -0x7A80 /**< Processing of the CertificateRequest handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE -0x7B00 /**< Processing of the ServerKeyExchange handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_SERVER_HELLO_DONE -0x7B80 /**< Processing of the ServerHelloDone handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE -0x7C00 /**< Processing of the ClientKeyExchange handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP -0x7C80 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public. */
#define MBEDTLS_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS -0x7D00 /**< Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret. */
#define MBEDTLS_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY -0x7D80 /**< Processing of the CertificateVerify handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC -0x7E00 /**< Processing of the ChangeCipherSpec handshake message failed. */
#define MBEDTLS_ERR_SSL_BAD_HS_FINISHED -0x7E80 /**< Processing of the Finished handshake message failed. */
#define MBEDTLS_ERR_SSL_ALLOC_FAILED -0x7F00 /**< Memory allocation failed */
#define MBEDTLS_ERR_SSL_HW_ACCEL_FAILED -0x7F80 /**< Hardware acceleration function returned with error */
#define MBEDTLS_ERR_SSL_HW_ACCEL_FALLTHROUGH -0x6F80 /**< Hardware acceleration function skipped / left alone data */
#define MBEDTLS_ERR_SSL_COMPRESSION_FAILED -0x6F00 /**< Processing of the compression / decompression failed */
#define MBEDTLS_ERR_SSL_BAD_HS_PROTOCOL_VERSION -0x6E80 /**< Handshake protocol not within min/max boundaries */
#define MBEDTLS_ERR_SSL_BAD_HS_NEW_SESSION_TICKET -0x6E00 /**< Processing of the NewSessionTicket handshake message failed. */
#define MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED -0x6D80 /**< Session ticket has expired. */
#define MBEDTLS_ERR_SSL_PK_TYPE_MISMATCH -0x6D00 /**< Public key type mismatch (eg, asked for RSA key exchange and presented EC key) */
#define MBEDTLS_ERR_SSL_UNKNOWN_IDENTITY -0x6C80 /**< Unknown identity received (eg, PSK identity) */
#define MBEDTLS_ERR_SSL_INTERNAL_ERROR -0x6C00 /**< Internal error (eg, unexpected failure in lower-level module) */
#define MBEDTLS_ERR_SSL_COUNTER_WRAPPING -0x6B80 /**< A counter would wrap (eg, too many messages exchanged). */
#define MBEDTLS_ERR_SSL_WAITING_SERVER_HELLO_RENEGO -0x6B00 /**< Unexpected message at ServerHello in renegotiation. */
#define MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED -0x6A80 /**< DTLS client must retry for hello verification */
#define MBEDTLS_ERR_SSL_BUFFER_TOO_SMALL -0x6A00 /**< A buffer is too small to receive or write a message */
#define MBEDTLS_ERR_SSL_NO_USABLE_CIPHERSUITE -0x6980 /**< None of the common ciphersuites is usable (eg, no suitable certificate, see debug messages). */
#define MBEDTLS_ERR_SSL_WANT_READ -0x6900 /**< Connection requires a read call. */
#define MBEDTLS_ERR_SSL_WANT_WRITE -0x6880 /**< Connection requires a write call. */
#define MBEDTLS_ERR_SSL_TIMEOUT -0x6800 /**< The operation timed out. */
#define MBEDTLS_ERR_SSL_CLIENT_RECONNECT -0x6780 /**< The client initiated a reconnect from the same port. */
#define MBEDTLS_ERR_SSL_UNEXPECTED_RECORD -0x6700 /**< Record header looks valid but is not expected. */
/*
* Various constants
*/
#define MBEDTLS_SSL_MAJOR_VERSION_3 3
#define MBEDTLS_SSL_MINOR_VERSION_0 0 /*!< SSL v3.0 */
#define MBEDTLS_SSL_MINOR_VERSION_1 1 /*!< TLS v1.0 */
#define MBEDTLS_SSL_MINOR_VERSION_2 2 /*!< TLS v1.1 */
#define MBEDTLS_SSL_MINOR_VERSION_3 3 /*!< TLS v1.2 */
#define MBEDTLS_SSL_TRANSPORT_STREAM 0 /*!< TLS */
#define MBEDTLS_SSL_TRANSPORT_DATAGRAM 1 /*!< DTLS */
#define MBEDTLS_SSL_MAX_HOST_NAME_LEN 255 /*!< Maximum host name defined in RFC 1035 */
/* RFC 6066 section 4, see also mfl_code_to_length in ssl_tls.c
* NONE must be zero so that memset()ing structure to zero works */
#define MBEDTLS_SSL_MAX_FRAG_LEN_NONE 0 /*!< don't use this extension */
#define MBEDTLS_SSL_MAX_FRAG_LEN_512 1 /*!< MaxFragmentLength 2^9 */
#define MBEDTLS_SSL_MAX_FRAG_LEN_1024 2 /*!< MaxFragmentLength 2^10 */
#define MBEDTLS_SSL_MAX_FRAG_LEN_2048 3 /*!< MaxFragmentLength 2^11 */
#define MBEDTLS_SSL_MAX_FRAG_LEN_4096 4 /*!< MaxFragmentLength 2^12 */
#define MBEDTLS_SSL_MAX_FRAG_LEN_INVALID 5 /*!< first invalid value */
#define MBEDTLS_SSL_IS_CLIENT 0
#define MBEDTLS_SSL_IS_SERVER 1
#define MBEDTLS_SSL_IS_NOT_FALLBACK 0
#define MBEDTLS_SSL_IS_FALLBACK 1
#define MBEDTLS_SSL_EXTENDED_MS_DISABLED 0
#define MBEDTLS_SSL_EXTENDED_MS_ENABLED 1
#define MBEDTLS_SSL_ETM_DISABLED 0
#define MBEDTLS_SSL_ETM_ENABLED 1
#define MBEDTLS_SSL_COMPRESS_NULL 0
#define MBEDTLS_SSL_COMPRESS_DEFLATE 1
#define MBEDTLS_SSL_VERIFY_NONE 0
#define MBEDTLS_SSL_VERIFY_OPTIONAL 1
#define MBEDTLS_SSL_VERIFY_REQUIRED 2
#define MBEDTLS_SSL_VERIFY_UNSET 3 /* Used only for sni_authmode */
#define MBEDTLS_SSL_LEGACY_RENEGOTIATION 0
#define MBEDTLS_SSL_SECURE_RENEGOTIATION 1
#define MBEDTLS_SSL_RENEGOTIATION_DISABLED 0
#define MBEDTLS_SSL_RENEGOTIATION_ENABLED 1
#define MBEDTLS_SSL_ANTI_REPLAY_DISABLED 0
#define MBEDTLS_SSL_ANTI_REPLAY_ENABLED 1
#define MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED -1
#define MBEDTLS_SSL_RENEGO_MAX_RECORDS_DEFAULT 16
#define MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION 0
#define MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION 1
#define MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE 2
#define MBEDTLS_SSL_TRUNC_HMAC_DISABLED 0
#define MBEDTLS_SSL_TRUNC_HMAC_ENABLED 1
#define MBEDTLS_SSL_TRUNCATED_HMAC_LEN 10 /* 80 bits, rfc 6066 section 7 */
#define MBEDTLS_SSL_SESSION_TICKETS_DISABLED 0
#define MBEDTLS_SSL_SESSION_TICKETS_ENABLED 1
#define MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED 0
#define MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED 1
#define MBEDTLS_SSL_ARC4_ENABLED 0
#define MBEDTLS_SSL_ARC4_DISABLED 1
#define MBEDTLS_SSL_PRESET_DEFAULT 0
#define MBEDTLS_SSL_PRESET_SUITEB 2
/*
* Default range for DTLS retransmission timer value, in milliseconds.
* RFC 6347 4.2.4.1 says from 1 second to 60 seconds.
*/
#define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MIN 1000
#define MBEDTLS_SSL_DTLS_TIMEOUT_DFL_MAX 60000
/**
* \name SECTION: Module settings
*
* The configuration options you can set for this module are in this section.
* Either change them in config.h or define them on the compiler command line.
* \{
*/
#if !defined(MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME)
#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
#endif
/*
* Maxium fragment length in bytes,
* determines the size of each of the two internal I/O buffers.
*
* Note: the RFC defines the default size of SSL / TLS messages. If you
* change the value here, other clients / servers may not be able to
* communicate with you anymore. Only change this value if you control
* both sides of the connection and have it reduced at both sides, or
* if you're using the Max Fragment Length extension and you know all your
* peers are using it too!
*/
#if !defined(MBEDTLS_SSL_MAX_CONTENT_LEN)
#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 /**< Size of the input / output buffer */
#endif
/* \} name SECTION: Module settings */
/*
* Length of the verify data for secure renegotiation
*/
#if defined(MBEDTLS_SSL_PROTO_SSL3)
#define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 36
#else
#define MBEDTLS_SSL_VERIFY_DATA_MAX_LEN 12
#endif
/*
* Signaling ciphersuite values (SCSV)
*/
#define MBEDTLS_SSL_EMPTY_RENEGOTIATION_INFO 0xFF /**< renegotiation info ext */
#define MBEDTLS_SSL_FALLBACK_SCSV_VALUE 0x5600 /**< draft-ietf-tls-downgrade-scsv-00 */
/*
* Supported Signature and Hash algorithms (For TLS 1.2)
* RFC 5246 section 7.4.1.4.1
*/
#define MBEDTLS_SSL_HASH_NONE 0
#define MBEDTLS_SSL_HASH_MD5 1
#define MBEDTLS_SSL_HASH_SHA1 2
#define MBEDTLS_SSL_HASH_SHA224 3
#define MBEDTLS_SSL_HASH_SHA256 4
#define MBEDTLS_SSL_HASH_SHA384 5
#define MBEDTLS_SSL_HASH_SHA512 6
#define MBEDTLS_SSL_SIG_ANON 0
#define MBEDTLS_SSL_SIG_RSA 1
#define MBEDTLS_SSL_SIG_ECDSA 3
/*
* Client Certificate Types
* RFC 5246 section 7.4.4 plus RFC 4492 section 5.5
*/
#define MBEDTLS_SSL_CERT_TYPE_RSA_SIGN 1
#define MBEDTLS_SSL_CERT_TYPE_ECDSA_SIGN 64
/*
* Message, alert and handshake types
*/
#define MBEDTLS_SSL_MSG_CHANGE_CIPHER_SPEC 20
#define MBEDTLS_SSL_MSG_ALERT 21
#define MBEDTLS_SSL_MSG_HANDSHAKE 22
#define MBEDTLS_SSL_MSG_APPLICATION_DATA 23
#define MBEDTLS_SSL_ALERT_LEVEL_WARNING 1
#define MBEDTLS_SSL_ALERT_LEVEL_FATAL 2
#define MBEDTLS_SSL_ALERT_MSG_CLOSE_NOTIFY 0 /* 0x00 */
#define MBEDTLS_SSL_ALERT_MSG_UNEXPECTED_MESSAGE 10 /* 0x0A */
#define MBEDTLS_SSL_ALERT_MSG_BAD_RECORD_MAC 20 /* 0x14 */
#define MBEDTLS_SSL_ALERT_MSG_DECRYPTION_FAILED 21 /* 0x15 */
#define MBEDTLS_SSL_ALERT_MSG_RECORD_OVERFLOW 22 /* 0x16 */
#define MBEDTLS_SSL_ALERT_MSG_DECOMPRESSION_FAILURE 30 /* 0x1E */
#define MBEDTLS_SSL_ALERT_MSG_HANDSHAKE_FAILURE 40 /* 0x28 */
#define MBEDTLS_SSL_ALERT_MSG_NO_CERT 41 /* 0x29 */
#define MBEDTLS_SSL_ALERT_MSG_BAD_CERT 42 /* 0x2A */
#define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_CERT 43 /* 0x2B */
#define MBEDTLS_SSL_ALERT_MSG_CERT_REVOKED 44 /* 0x2C */
#define MBEDTLS_SSL_ALERT_MSG_CERT_EXPIRED 45 /* 0x2D */
#define MBEDTLS_SSL_ALERT_MSG_CERT_UNKNOWN 46 /* 0x2E */
#define MBEDTLS_SSL_ALERT_MSG_ILLEGAL_PARAMETER 47 /* 0x2F */
#define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_CA 48 /* 0x30 */
#define MBEDTLS_SSL_ALERT_MSG_ACCESS_DENIED 49 /* 0x31 */
#define MBEDTLS_SSL_ALERT_MSG_DECODE_ERROR 50 /* 0x32 */
#define MBEDTLS_SSL_ALERT_MSG_DECRYPT_ERROR 51 /* 0x33 */
#define MBEDTLS_SSL_ALERT_MSG_EXPORT_RESTRICTION 60 /* 0x3C */
#define MBEDTLS_SSL_ALERT_MSG_PROTOCOL_VERSION 70 /* 0x46 */
#define MBEDTLS_SSL_ALERT_MSG_INSUFFICIENT_SECURITY 71 /* 0x47 */
#define MBEDTLS_SSL_ALERT_MSG_INTERNAL_ERROR 80 /* 0x50 */
#define MBEDTLS_SSL_ALERT_MSG_INAPROPRIATE_FALLBACK 86 /* 0x56 */
#define MBEDTLS_SSL_ALERT_MSG_USER_CANCELED 90 /* 0x5A */
#define MBEDTLS_SSL_ALERT_MSG_NO_RENEGOTIATION 100 /* 0x64 */
#define MBEDTLS_SSL_ALERT_MSG_UNSUPPORTED_EXT 110 /* 0x6E */
#define MBEDTLS_SSL_ALERT_MSG_UNRECOGNIZED_NAME 112 /* 0x70 */
#define MBEDTLS_SSL_ALERT_MSG_UNKNOWN_PSK_IDENTITY 115 /* 0x73 */
#define MBEDTLS_SSL_ALERT_MSG_NO_APPLICATION_PROTOCOL 120 /* 0x78 */
#define MBEDTLS_SSL_HS_HELLO_REQUEST 0
#define MBEDTLS_SSL_HS_CLIENT_HELLO 1
#define MBEDTLS_SSL_HS_SERVER_HELLO 2
#define MBEDTLS_SSL_HS_HELLO_VERIFY_REQUEST 3
#define MBEDTLS_SSL_HS_NEW_SESSION_TICKET 4
#define MBEDTLS_SSL_HS_CERTIFICATE 11
#define MBEDTLS_SSL_HS_SERVER_KEY_EXCHANGE 12
#define MBEDTLS_SSL_HS_CERTIFICATE_REQUEST 13
#define MBEDTLS_SSL_HS_SERVER_HELLO_DONE 14
#define MBEDTLS_SSL_HS_CERTIFICATE_VERIFY 15
#define MBEDTLS_SSL_HS_CLIENT_KEY_EXCHANGE 16
#define MBEDTLS_SSL_HS_FINISHED 20
/*
* TLS extensions
*/
#define MBEDTLS_TLS_EXT_SERVERNAME 0
#define MBEDTLS_TLS_EXT_SERVERNAME_HOSTNAME 0
#define MBEDTLS_TLS_EXT_MAX_FRAGMENT_LENGTH 1
#define MBEDTLS_TLS_EXT_TRUNCATED_HMAC 4
#define MBEDTLS_TLS_EXT_SUPPORTED_ELLIPTIC_CURVES 10
#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS 11
#define MBEDTLS_TLS_EXT_SIG_ALG 13
#define MBEDTLS_TLS_EXT_ALPN 16
#define MBEDTLS_TLS_EXT_ENCRYPT_THEN_MAC 22 /* 0x16 */
#define MBEDTLS_TLS_EXT_EXTENDED_MASTER_SECRET 0x0017 /* 23 */
#define MBEDTLS_TLS_EXT_SESSION_TICKET 35
#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP 256 /* experimental */
#define MBEDTLS_TLS_EXT_RENEGOTIATION_INFO 0xFF01
/*
* Size defines
*/
#if !defined(MBEDTLS_PSK_MAX_LEN)
#define MBEDTLS_PSK_MAX_LEN 32 /* 256 bits */
#endif
/* Dummy type used only for its size */
union mbedtls_ssl_premaster_secret
{
#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED)
unsigned char _pms_rsa[48]; /* RFC 5246 8.1.1 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED)
unsigned char _pms_dhm[MBEDTLS_MPI_MAX_SIZE]; /* RFC 5246 8.1.2 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED)
unsigned char _pms_ecdh[MBEDTLS_ECP_MAX_BYTES]; /* RFC 4492 5.10 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED)
unsigned char _pms_psk[4 + 2 * MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 2 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED)
unsigned char _pms_dhe_psk[4 + MBEDTLS_MPI_MAX_SIZE
+ MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 3 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED)
unsigned char _pms_rsa_psk[52 + MBEDTLS_PSK_MAX_LEN]; /* RFC 4279 4 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED)
unsigned char _pms_ecdhe_psk[4 + MBEDTLS_ECP_MAX_BYTES
+ MBEDTLS_PSK_MAX_LEN]; /* RFC 5489 2 */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
unsigned char _pms_ecjpake[32]; /* Thread spec: SHA-256 output */
#endif
};
#define MBEDTLS_PREMASTER_SIZE sizeof( union mbedtls_ssl_premaster_secret )
#ifdef __cplusplus
extern "C" {
#endif
/*
* SSL state machine
*/
typedef enum
{
MBEDTLS_SSL_HELLO_REQUEST,
MBEDTLS_SSL_CLIENT_HELLO,
MBEDTLS_SSL_SERVER_HELLO,
MBEDTLS_SSL_SERVER_CERTIFICATE,
MBEDTLS_SSL_SERVER_KEY_EXCHANGE,
MBEDTLS_SSL_CERTIFICATE_REQUEST,
MBEDTLS_SSL_SERVER_HELLO_DONE,
MBEDTLS_SSL_CLIENT_CERTIFICATE,
MBEDTLS_SSL_CLIENT_KEY_EXCHANGE,
MBEDTLS_SSL_CERTIFICATE_VERIFY,
MBEDTLS_SSL_CLIENT_CHANGE_CIPHER_SPEC,
MBEDTLS_SSL_CLIENT_FINISHED,
MBEDTLS_SSL_SERVER_CHANGE_CIPHER_SPEC,
MBEDTLS_SSL_SERVER_FINISHED,
MBEDTLS_SSL_FLUSH_BUFFERS,
MBEDTLS_SSL_HANDSHAKE_WRAPUP,
MBEDTLS_SSL_HANDSHAKE_OVER,
MBEDTLS_SSL_SERVER_NEW_SESSION_TICKET,
MBEDTLS_SSL_SERVER_HELLO_VERIFY_REQUEST_SENT,
}
mbedtls_ssl_states;
/* Defined below */
typedef struct mbedtls_ssl_session mbedtls_ssl_session;
typedef struct mbedtls_ssl_context mbedtls_ssl_context;
typedef struct mbedtls_ssl_config mbedtls_ssl_config;
/* Defined in ssl_internal.h */
typedef struct mbedtls_ssl_transform mbedtls_ssl_transform;
typedef struct mbedtls_ssl_handshake_params mbedtls_ssl_handshake_params;
#if defined(MBEDTLS_X509_CRT_PARSE_C)
typedef struct mbedtls_ssl_key_cert mbedtls_ssl_key_cert;
#endif
#if defined(MBEDTLS_SSL_PROTO_DTLS)
typedef struct mbedtls_ssl_flight_item mbedtls_ssl_flight_item;
#endif
/*
* This structure is used for storing current session data.
*/
struct mbedtls_ssl_session
{
#if defined(MBEDTLS_HAVE_TIME)
time_t start; /*!< starting time */
#endif
int ciphersuite; /*!< chosen ciphersuite */
int compression; /*!< chosen compression */
size_t id_len; /*!< session id length */
unsigned char id[32]; /*!< session identifier */
unsigned char master[48]; /*!< the master secret */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_x509_crt *peer_cert; /*!< peer X.509 cert chain */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
uint32_t verify_result; /*!< verification result */
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
unsigned char *ticket; /*!< RFC 5077 session ticket */
size_t ticket_len; /*!< session ticket length */
uint32_t ticket_lifetime; /*!< ticket lifetime hint */
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
unsigned char mfl_code; /*!< MaxFragmentLength negotiated by peer */
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
int trunc_hmac; /*!< flag for truncated hmac activation */
#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
int encrypt_then_mac; /*!< flag for EtM activation */
#endif
};
/**
* SSL/TLS configuration to be shared between mbedtls_ssl_context structures.
*/
struct mbedtls_ssl_config
{
/* Group items by size (largest first) to minimize padding overhead */
/*
* Pointers
*/
const int *ciphersuite_list[4]; /*!< allowed ciphersuites per version */
/** Callback for printing debug output */
void (*f_dbg)(void *, int, const char *, int, const char *);
void *p_dbg; /*!< context for the debug function */
/** Callback for getting (pseudo-)random numbers */
int (*f_rng)(void *, unsigned char *, size_t);
void *p_rng; /*!< context for the RNG function */
/** Callback to retrieve a session from the cache */
int (*f_get_cache)(void *, mbedtls_ssl_session *);
/** Callback to store a session into the cache */
int (*f_set_cache)(void *, const mbedtls_ssl_session *);
void *p_cache; /*!< context for cache callbacks */
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
/** Callback for setting cert according to SNI extension */
int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *, size_t);
void *p_sni; /*!< context for SNI callback */
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/** Callback to customize X.509 certificate chain verification */
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *);
void *p_vrfy; /*!< context for X.509 verify calllback */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
/** Callback to retrieve PSK key from identity */
int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *, size_t);
void *p_psk; /*!< context for PSK callback */
#endif
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
/** Callback to create & write a cookie for ClientHello veirifcation */
int (*f_cookie_write)( void *, unsigned char **, unsigned char *,
const unsigned char *, size_t );
/** Callback to verify validity of a ClientHello cookie */
int (*f_cookie_check)( void *, const unsigned char *, size_t,
const unsigned char *, size_t );
void *p_cookie; /*!< context for the cookie callbacks */
#endif
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C)
/** Callback to create & write a session ticket */
int (*f_ticket_write)( void *, const mbedtls_ssl_session *,
unsigned char *, const unsigned char *, size_t *, uint32_t * );
/** Callback to parse a session ticket into a session structure */
int (*f_ticket_parse)( void *, mbedtls_ssl_session *, unsigned char *, size_t);
void *p_ticket; /*!< context for the ticket callbacks */
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
/** Callback to export key block and master secret */
int (*f_export_keys)( void *, const unsigned char *,
const unsigned char *, size_t, size_t, size_t );
void *p_export_keys; /*!< context for key export callback */
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
const mbedtls_x509_crt_profile *cert_profile; /*!< verification profile */
mbedtls_ssl_key_cert *key_cert; /*!< own certificate/key pair(s) */
mbedtls_x509_crt *ca_chain; /*!< trusted CAs */
mbedtls_x509_crl *ca_crl; /*!< trusted CAs CRLs */
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED)
const int *sig_hashes; /*!< allowed signature hashes */
#endif
#if defined(MBEDTLS_ECP_C)
const mbedtls_ecp_group_id *curve_list; /*!< allowed curves */
#endif
#if defined(MBEDTLS_DHM_C)
mbedtls_mpi dhm_P; /*!< prime modulus for DHM */
mbedtls_mpi dhm_G; /*!< generator for DHM */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
unsigned char *psk; /*!< pre-shared key */
size_t psk_len; /*!< length of the pre-shared key */
unsigned char *psk_identity; /*!< identity for PSK negotiation */
size_t psk_identity_len;/*!< length of identity */
#endif
#if defined(MBEDTLS_SSL_ALPN)
const char **alpn_list; /*!< ordered list of protocols */
#endif
/*
* Numerical settings (int then char)
*/
uint32_t read_timeout; /*!< timeout for mbedtls_ssl_read (ms) */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
uint32_t hs_timeout_min; /*!< initial value of the handshake
retransmission timeout (ms) */
uint32_t hs_timeout_max; /*!< maximum value of the handshake
retransmission timeout (ms) */
#endif
#if defined(MBEDTLS_SSL_RENEGOTIATION)
int renego_max_records; /*!< grace period for renegotiation */
unsigned char renego_period[8]; /*!< value of the record counters
that triggers renegotiation */
#endif
#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT)
unsigned int badmac_limit; /*!< limit of records with a bad MAC */
#endif
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C)
unsigned int dhm_min_bitlen; /*!< min. bit length of the DHM prime */
#endif
unsigned char max_major_ver; /*!< max. major version used */
unsigned char max_minor_ver; /*!< max. minor version used */
unsigned char min_major_ver; /*!< min. major version used */
unsigned char min_minor_ver; /*!< min. minor version used */
/*
* Flags (bitfields)
*/
unsigned int endpoint : 1; /*!< 0: client, 1: server */
unsigned int transport : 1; /*!< stream (TLS) or datagram (DTLS) */
unsigned int authmode : 2; /*!< MBEDTLS_SSL_VERIFY_XXX */
/* needed even with renego disabled for LEGACY_BREAK_HANDSHAKE */
unsigned int allow_legacy_renegotiation : 2 ; /*!< MBEDTLS_LEGACY_XXX */
#if defined(MBEDTLS_ARC4_C)
unsigned int arc4_disabled : 1; /*!< blacklist RC4 ciphersuites? */
#endif
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
unsigned int mfl_code : 3; /*!< desired fragment length */
#endif
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
unsigned int encrypt_then_mac : 1 ; /*!< negotiate encrypt-then-mac? */
#endif
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
unsigned int extended_ms : 1; /*!< negotiate extended master secret? */
#endif
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
unsigned int anti_replay : 1; /*!< detect and prevent replay? */
#endif
#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
unsigned int cbc_record_splitting : 1; /*!< do cbc record splitting */
#endif
#if defined(MBEDTLS_SSL_RENEGOTIATION)
unsigned int disable_renegotiation : 1; /*!< disable renegotiation? */
#endif
#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
unsigned int trunc_hmac : 1; /*!< negotiate truncated hmac? */
#endif
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
unsigned int session_tickets : 1; /*!< use session tickets? */
#endif
#if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C)
unsigned int fallback : 1; /*!< is this a fallback? */
#endif
};
struct mbedtls_ssl_context
{
const mbedtls_ssl_config *conf; /*!< configuration information */
/*
* Miscellaneous
*/
int state; /*!< SSL handshake: current state */
#if defined(MBEDTLS_SSL_RENEGOTIATION)
int renego_status; /*!< Initial, in progress, pending? */
int renego_records_seen; /*!< Records since renego request, or with DTLS,
number of retransmissions of request if
renego_max_records is < 0 */
#endif
int major_ver; /*!< equal to MBEDTLS_SSL_MAJOR_VERSION_3 */
int minor_ver; /*!< either 0 (SSL3) or 1 (TLS1.0) */
#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT)
unsigned badmac_seen; /*!< records with a bad MAC received */
#endif
/*
* Callbacks
*/
int (*f_send)(void *, const unsigned char *, size_t);
int (*f_recv)(void *, unsigned char *, size_t);
int (*f_recv_timeout)(void *, unsigned char *, size_t, uint32_t);
void *p_bio; /*!< context for I/O operations */
/*
* Session layer
*/
mbedtls_ssl_session *session_in; /*!< current session data (in) */
mbedtls_ssl_session *session_out; /*!< current session data (out) */
mbedtls_ssl_session *session; /*!< negotiated session data */
mbedtls_ssl_session *session_negotiate; /*!< session data in negotiation */
mbedtls_ssl_handshake_params *handshake; /*!< params required only during
the handshake process */
/*
* Record layer transformations
*/
mbedtls_ssl_transform *transform_in; /*!< current transform params (in) */
mbedtls_ssl_transform *transform_out; /*!< current transform params (in) */
mbedtls_ssl_transform *transform; /*!< negotiated transform params */
mbedtls_ssl_transform *transform_negotiate; /*!< transform params in negotiation */
/*
* Timers
*/
void *p_timer; /*!< context for the timer callbacks */
void (*f_set_timer)(void *, uint32_t, uint32_t); /*!< set timer callback */
int (*f_get_timer)(void *); /*!< get timer callback */
/*
* Record layer (incoming data)
*/
unsigned char *in_buf; /*!< input buffer */
unsigned char *in_ctr; /*!< 64-bit incoming message counter
TLS: maintained by us
DTLS: read from peer */
unsigned char *in_hdr; /*!< start of record header */
unsigned char *in_len; /*!< two-bytes message length field */
unsigned char *in_iv; /*!< ivlen-byte IV */
unsigned char *in_msg; /*!< message contents (in_iv+ivlen) */
unsigned char *in_offt; /*!< read offset in application data */
int in_msgtype; /*!< record header: message type */
size_t in_msglen; /*!< record header: message length */
size_t in_left; /*!< amount of data read so far */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
uint16_t in_epoch; /*!< DTLS epoch for incoming records */
size_t next_record_offset; /*!< offset of the next record in datagram
(equal to in_left if none) */
#endif
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
uint64_t in_window_top; /*!< last validated record seq_num */
uint64_t in_window; /*!< bitmask for replay detection */
#endif
size_t in_hslen; /*!< current handshake message length,
including the handshake header */
int nb_zero; /*!< # of 0-length encrypted messages */
int record_read; /*!< record is already present */
/*
* Record layer (outgoing data)
*/
unsigned char *out_buf; /*!< output buffer */
unsigned char *out_ctr; /*!< 64-bit outgoing message counter */
unsigned char *out_hdr; /*!< start of record header */
unsigned char *out_len; /*!< two-bytes message length field */
unsigned char *out_iv; /*!< ivlen-byte IV */
unsigned char *out_msg; /*!< message contents (out_iv+ivlen) */
int out_msgtype; /*!< record header: message type */
size_t out_msglen; /*!< record header: message length */
size_t out_left; /*!< amount of data not yet written */
#if defined(MBEDTLS_ZLIB_SUPPORT)
unsigned char *compress_buf; /*!< zlib data buffer */
#endif
#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
signed char split_done; /*!< current record already splitted? */
#endif
/*
* PKI layer
*/
int client_auth; /*!< flag for client auth. */
/*
* User settings
*/
#if defined(MBEDTLS_X509_CRT_PARSE_C)
char *hostname; /*!< expected peer CN for verification
(and SNI if available) */
#endif
#if defined(MBEDTLS_SSL_ALPN)
const char *alpn_chosen; /*!< negotiated protocol */
#endif
/*
* Information for DTLS hello verify
*/
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
unsigned char *cli_id; /*!< transport-level ID of the client */
size_t cli_id_len; /*!< length of cli_id */
#endif
/*
* Secure renegotiation
*/
/* needed to know when to send extension on server */
int secure_renegotiation; /*!< does peer support legacy or
secure renegotiation */
#if defined(MBEDTLS_SSL_RENEGOTIATION)
size_t verify_data_len; /*!< length of verify data stored */
char own_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */
char peer_verify_data[MBEDTLS_SSL_VERIFY_DATA_MAX_LEN]; /*!< previous handshake verify data */
#endif
};
#if defined(MBEDTLS_SSL_HW_RECORD_ACCEL)
#define MBEDTLS_SSL_CHANNEL_OUTBOUND 0
#define MBEDTLS_SSL_CHANNEL_INBOUND 1
extern int (*mbedtls_ssl_hw_record_init)(mbedtls_ssl_context *ssl,
const unsigned char *key_enc, const unsigned char *key_dec,
size_t keylen,
const unsigned char *iv_enc, const unsigned char *iv_dec,
size_t ivlen,
const unsigned char *mac_enc, const unsigned char *mac_dec,
size_t maclen);
extern int (*mbedtls_ssl_hw_record_activate)(mbedtls_ssl_context *ssl, int direction);
extern int (*mbedtls_ssl_hw_record_reset)(mbedtls_ssl_context *ssl);
extern int (*mbedtls_ssl_hw_record_write)(mbedtls_ssl_context *ssl);
extern int (*mbedtls_ssl_hw_record_read)(mbedtls_ssl_context *ssl);
extern int (*mbedtls_ssl_hw_record_finish)(mbedtls_ssl_context *ssl);
#endif /* MBEDTLS_SSL_HW_RECORD_ACCEL */
/**
* \brief Returns the list of ciphersuites supported by the SSL/TLS module.
*
* \return a statically allocated array of ciphersuites, the last
* entry is 0.
*/
const int *mbedtls_ssl_list_ciphersuites( void );
/**
* \brief Return the name of the ciphersuite associated with the
* given ID
*
* \param ciphersuite_id SSL ciphersuite ID
*
* \return a string containing the ciphersuite name
*/
const char *mbedtls_ssl_get_ciphersuite_name( const int ciphersuite_id );
/**
* \brief Return the ID of the ciphersuite associated with the
* given name
*
* \param ciphersuite_name SSL ciphersuite name
*
* \return the ID with the ciphersuite or 0 if not found
*/
int mbedtls_ssl_get_ciphersuite_id( const char *ciphersuite_name );
/**
* \brief Initialize an SSL context
* Just makes the context ready for mbedtls_ssl_setup() or
* mbedtls_ssl_free()
*
* \param ssl SSL context
*/
void mbedtls_ssl_init( mbedtls_ssl_context *ssl );
/**
* \brief Set up an SSL context for use
*
* \note No copy of the configuration context is made, it can be
* shared by many mbedtls_ssl_context structures.
*
* \warning Modifying the conf structure after is has been used in this
* function is unsupported!
*
* \param ssl SSL context
* \param conf SSL configuration to use
*
* \return 0 if successful, or MBEDTLS_ERR_SSL_ALLOC_FAILED if
* memory allocation failed
*/
int mbedtls_ssl_setup( mbedtls_ssl_context *ssl,
const mbedtls_ssl_config *conf );
/**
* \brief Reset an already initialized SSL context for re-use
* while retaining application-set variables, function
* pointers and data.
*
* \param ssl SSL context
* \return 0 if successful, or POLASSL_ERR_SSL_MALLOC_FAILED,
MBEDTLS_ERR_SSL_HW_ACCEL_FAILED or
* MBEDTLS_ERR_SSL_COMPRESSION_FAILED
*/
int mbedtls_ssl_session_reset( mbedtls_ssl_context *ssl );
/**
* \brief Set the current endpoint type
*
* \param conf SSL configuration
* \param endpoint must be MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER
*/
void mbedtls_ssl_conf_endpoint( mbedtls_ssl_config *conf, int endpoint );
/**
* \brief Set the transport type (TLS or DTLS).
* Default: TLS
*
* \note For DTLS, you must either provide a recv callback that
* doesn't block, or one that handles timeouts, see
* \c mbedtls_ssl_set_bio(). You also need to provide timer
* callbacks with \c mbedtls_ssl_set_timer_cb().
*
* \param conf SSL configuration
* \param transport transport type:
* MBEDTLS_SSL_TRANSPORT_STREAM for TLS,
* MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS.
*/
void mbedtls_ssl_conf_transport( mbedtls_ssl_config *conf, int transport );
/**
* \brief Set the certificate verification mode
* Default: NONE on server, REQUIRED on client
*
* \param conf SSL configuration
* \param authmode can be:
*
* MBEDTLS_SSL_VERIFY_NONE: peer certificate is not checked
* (default on server)
* (insecure on client)
*
* MBEDTLS_SSL_VERIFY_OPTIONAL: peer certificate is checked, however the
* handshake continues even if verification failed;
* mbedtls_ssl_get_verify_result() can be called after the
* handshake is complete.
*
* MBEDTLS_SSL_VERIFY_REQUIRED: peer *must* present a valid certificate,
* handshake is aborted if verification failed.
*
* \note On client, MBEDTLS_SSL_VERIFY_REQUIRED is the recommended mode.
* With MBEDTLS_SSL_VERIFY_OPTIONAL, the user needs to call mbedtls_ssl_get_verify_result() at
* the right time(s), which may not be obvious, while REQUIRED always perform
* the verification as soon as possible. For example, REQUIRED was protecting
* against the "triple handshake" attack even before it was found.
*/
void mbedtls_ssl_conf_authmode( mbedtls_ssl_config *conf, int authmode );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* \brief Set the verification callback (Optional).
*
* If set, the verify callback is called for each
* certificate in the chain. For implementation
* information, please see \c x509parse_verify()
*
* \param conf SSL configuration
* \param f_vrfy verification function
* \param p_vrfy verification parameter
*/
void mbedtls_ssl_conf_verify( mbedtls_ssl_config *conf,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/**
* \brief Set the random number generator callback
*
* \param conf SSL configuration
* \param f_rng RNG function
* \param p_rng RNG parameter
*/
void mbedtls_ssl_conf_rng( mbedtls_ssl_config *conf,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief Set the debug callback
*
* The callback has the following argument:
* void * opaque context for the callback
* int debug level
* const char * file name
* int line number
* const char * message
*
* \param conf SSL configuration
* \param f_dbg debug function
* \param p_dbg debug parameter
*/
void mbedtls_ssl_conf_dbg( mbedtls_ssl_config *conf,
void (*f_dbg)(void *, int, const char *, int, const char *),
void *p_dbg );
/**
* \brief Set the underlying BIO callbacks for write, read and
* read-with-timeout.
*
* \param ssl SSL context
* \param p_bio parameter (context) shared by BIO callbacks
* \param f_send write callback
* \param f_recv read callback
* \param f_recv_timeout blocking read callback with timeout.
* The last argument is the timeout in milliseconds,
* 0 means no timeout (block forever until a message comes)
*
* \note One of f_recv or f_recv_timeout can be NULL, in which case
* the other is used. If both are non-NULL, f_recv_timeout is
* used and f_recv is ignored (as if it were NULL).
*
* \note The two most common use cases are:
* - non-blocking I/O, f_recv != NULL, f_recv_timeout == NULL
* - blocking I/O, f_recv == NULL, f_recv_timout != NULL
*
* \note For DTLS, you need to provide either a non-NULL
* f_recv_timeout callback, or a f_recv that doesn't block.
*/
void mbedtls_ssl_set_bio( mbedtls_ssl_context *ssl,
void *p_bio,
int (*f_send)(void *, const unsigned char *, size_t),
int (*f_recv)(void *, unsigned char *, size_t),
int (*f_recv_timeout)(void *, unsigned char *, size_t, uint32_t) );
/**
* \brief Set the timeout period for mbedtls_ssl_read()
* (Default: no timeout.)
*
* \param conf SSL configuration context
* \param timeout Timeout value in milliseconds.
* Use 0 for no timeout (default).
*
* \note With blocking I/O, this will only work if a non-NULL
* \c f_recv_timeout was set with \c mbedtls_ssl_set_bio().
* With non-blocking I/O, this will only work if timer
* callbacks were set with \c mbedtls_ssl_set_timer_cb().
*
* \note With non-blocking I/O, you may also skip this function
* altogether and handle timeouts at the application layer.
*/
void mbedtls_ssl_conf_read_timeout( mbedtls_ssl_config *conf, uint32_t timeout );
/**
* \brief Set the timer callbacks
* (Mandatory for DTLS.)
*
* \param ssl SSL context
* \param p_timer parameter (context) shared by timer callback
* \param f_set_timer set timer callback
* Accepts an intermediate and a final delay in milliseconcs
* If the final delay is 0, cancels the running timer.
* \param f_get_timer get timer callback. Must return:
* -1 if cancelled
* 0 if none of the delays is expired
* 1 if the intermediate delay only is expired
* 2 if the final delay is expired
*/
void mbedtls_ssl_set_timer_cb( mbedtls_ssl_context *ssl,
void *p_timer,
void (*f_set_timer)(void *, uint32_t int_ms, uint32_t fin_ms),
int (*f_get_timer)(void *) );
/**
* \brief Callback type: generate and write session ticket
*
* \note This describes what a callback implementation should do.
* This callback should generate and encrypted and
* authenticated ticket for the session and write it to the
* output buffer. Here, ticket means the opaque ticket part
* of the NewSessionTicket structure of RFC 5077.
*
* \param p_ticket Context for the callback
* \param session SSL session to bo written in the ticket
* \param start Start of the outpur buffer
* \param end End of the output buffer
* \param tlen On exit, holds the length written
* \param lifetime On exit, holds the lifetime of the ticket in seconds
*
* \return 0 if successful, or
* a specific MBEDTLS_ERR_XXX code.
*/
typedef int mbedtls_ssl_ticket_write_t( void *p_ticket,
const mbedtls_ssl_session *session,
unsigned char *start,
const unsigned char *end,
size_t *tlen,
uint32_t *lifetime );
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
/**
* \brief Callback type: Export key block and master secret
*
* \note This is required for certain uses of TLS, e.g. EAP-TLS
* (RFC 5216) and Thread. The key pointers are ephemeral and
* therefore must not be stored. The master secret and keys
* should not be used directly except as an input to a key
* derivation function.
*
* \param p_expkey Context for the callback
* \param ms Pointer to master secret (fixed length: 48 bytes)
* \param kb Pointer to key block, see RFC 5246 section 6.3
* (variable length: 2 * maclen + 2 * keylen + 2 * ivlen).
* \param maclen MAC length
* \param keylen Key length
* \param ivlen IV length
*
* \return 0 if successful, or
* a specific MBEDTLS_ERR_XXX code.
*/
typedef int mbedtls_ssl_export_keys_t( void *p_expkey,
const unsigned char *ms,
const unsigned char *kb,
size_t maclen,
size_t keylen,
size_t ivlen );
#endif /* MBEDTLS_SSL_EXPORT_KEYS */
/**
* \brief Callback type: parse and load session ticket
*
* \note This describes what a callback implementation should do.
* This callback should parse a session ticket as generated
* by the corresponding mbedtls_ssl_ticket_write_t function,
* and, if the ticket is authentic and valid, load the
* session.
*
* \note The implementation is allowed to modify the first len
* bytes of the input buffer, eg to use it as a temporary
* area for the decrypted ticket contents.
*
* \param p_ticket Context for the callback
* \param session SSL session to be loaded
* \param buf Start of the buffer containing the ticket
* \param len Length of the ticket.
*
* \return 0 if successful, or
* MBEDTLS_ERR_SSL_INVALID_MAC if not authentic, or
* MBEDTLS_ERR_SSL_SESSION_TICKET_EXPIRED if expired, or
* any other non-zero code for other failures.
*/
typedef int mbedtls_ssl_ticket_parse_t( void *p_ticket,
mbedtls_ssl_session *session,
unsigned char *buf,
size_t len );
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_SRV_C)
/**
* \brief Configure SSL session ticket callbacks (server only).
* (Default: none.)
*
* \note On server, session tickets are enabled by providing
* non-NULL callbacks.
*
* \note On client, use \c mbedtls_ssl_conf_session_tickets().
*
* \param conf SSL configuration context
* \param f_ticket_write Callback for writing a ticket
* \param f_ticket_parse Callback for parsing a ticket
* \param p_ticket Context shared by the two callbacks
*/
void mbedtls_ssl_conf_session_tickets_cb( mbedtls_ssl_config *conf,
mbedtls_ssl_ticket_write_t *f_ticket_write,
mbedtls_ssl_ticket_parse_t *f_ticket_parse,
void *p_ticket );
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_SSL_EXPORT_KEYS)
/**
* \brief Configure key export callback.
* (Default: none.)
*
* \note See \c mbedtls_ssl_export_keys_t.
*
* \param conf SSL configuration context
* \param f_export_keys Callback for exporting keys
* \param p_export_keys Context for the callback
*/
void mbedtls_ssl_conf_export_keys_cb( mbedtls_ssl_config *conf,
mbedtls_ssl_export_keys_t *f_export_keys,
void *p_export_keys );
#endif /* MBEDTLS_SSL_EXPORT_KEYS */
/**
* \brief Callback type: generate a cookie
*
* \param ctx Context for the callback
* \param p Buffer to write to,
* must be updated to point right after the cookie
* \param end Pointer to one past the end of the output buffer
* \param info Client ID info that was passed to
* \c mbedtls_ssl_set_client_transport_id()
* \param ilen Length of info in bytes
*
* \return The callback must return 0 on success,
* or a negative error code.
*/
typedef int mbedtls_ssl_cookie_write_t( void *ctx,
unsigned char **p, unsigned char *end,
const unsigned char *info, size_t ilen );
/**
* \brief Callback type: verify a cookie
*
* \param ctx Context for the callback
* \param cookie Cookie to verify
* \param clen Length of cookie
* \param info Client ID info that was passed to
* \c mbedtls_ssl_set_client_transport_id()
* \param ilen Length of info in bytes
*
* \return The callback must return 0 if cookie is valid,
* or a negative error code.
*/
typedef int mbedtls_ssl_cookie_check_t( void *ctx,
const unsigned char *cookie, size_t clen,
const unsigned char *info, size_t ilen );
#if defined(MBEDTLS_SSL_DTLS_HELLO_VERIFY) && defined(MBEDTLS_SSL_SRV_C)
/**
* \brief Register callbacks for DTLS cookies
* (Server only. DTLS only.)
*
* Default: dummy callbacks that fail, in order to force you to
* register working callbacks (and initialize their context).
*
* To disable HelloVerifyRequest, register NULL callbacks.
*
* \warning Disabling hello verification allows your server to be used
* for amplification in DoS attacks against other hosts.
* Only disable if you known this can't happen in your
* particular environment.
*
* \note See comments on \c mbedtls_ssl_handshake() about handling
* the MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED that is expected
* on the first handshake attempt when this is enabled.
*
* \note This is also necessary to handle client reconnection from
* the same port as described in RFC 6347 section 4.2.8 (only
* the variant with cookies is supported currently). See
* comments on \c mbedtls_ssl_read() for details.
*
* \param conf SSL configuration
* \param f_cookie_write Cookie write callback
* \param f_cookie_check Cookie check callback
* \param p_cookie Context for both callbacks
*/
void mbedtls_ssl_conf_dtls_cookies( mbedtls_ssl_config *conf,
mbedtls_ssl_cookie_write_t *f_cookie_write,
mbedtls_ssl_cookie_check_t *f_cookie_check,
void *p_cookie );
/**
* \brief Set client's transport-level identification info.
* (Server only. DTLS only.)
*
* This is usually the IP address (and port), but could be
* anything identify the client depending on the underlying
* network stack. Used for HelloVerifyRequest with DTLS.
* This is *not* used to route the actual packets.
*
* \param ssl SSL context
* \param info Transport-level info identifying the client (eg IP + port)
* \param ilen Length of info in bytes
*
* \note An internal copy is made, so the info buffer can be reused.
*
* \return 0 on success,
* MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used on client,
* MBEDTLS_ERR_SSL_ALLOC_FAILED if out of memory.
*/
int mbedtls_ssl_set_client_transport_id( mbedtls_ssl_context *ssl,
const unsigned char *info,
size_t ilen );
#endif /* MBEDTLS_SSL_DTLS_HELLO_VERIFY && MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
/**
* \brief Enable or disable anti-replay protection for DTLS.
* (DTLS only, no effect on TLS.)
* Default: enabled.
*
* \param conf SSL configuration
* \param mode MBEDTLS_SSL_ANTI_REPLAY_ENABLED or MBEDTLS_SSL_ANTI_REPLAY_DISABLED.
*
* \warning Disabling this is a security risk unless the application
* protocol handles duplicated packets in a safe way. You
* should not disable this without careful consideration.
* However, if your application already detects duplicated
* packets and needs information about them to adjust its
* transmission strategy, then you'll want to disable this.
*/
void mbedtls_ssl_conf_dtls_anti_replay( mbedtls_ssl_config *conf, char mode );
#endif /* MBEDTLS_SSL_DTLS_ANTI_REPLAY */
#if defined(MBEDTLS_SSL_DTLS_BADMAC_LIMIT)
/**
* \brief Set a limit on the number of records with a bad MAC
* before terminating the connection.
* (DTLS only, no effect on TLS.)
* Default: 0 (disabled).
*
* \param conf SSL configuration
* \param limit Limit, or 0 to disable.
*
* \note If the limit is N, then the connection is terminated when
* the Nth non-authentic record is seen.
*
* \note Records with an invalid header are not counted, only the
* ones going through the authentication-decryption phase.
*
* \note This is a security trade-off related to the fact that it's
* often relatively easy for an active attacker ot inject UDP
* datagrams. On one hand, setting a low limit here makes it
* easier for such an attacker to forcibly terminated a
* connection. On the other hand, a high limit or no limit
* might make us waste resources checking authentication on
* many bogus packets.
*/
void mbedtls_ssl_conf_dtls_badmac_limit( mbedtls_ssl_config *conf, unsigned limit );
#endif /* MBEDTLS_SSL_DTLS_BADMAC_LIMIT */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
/**
* \brief Set retransmit timeout values for the DTLS handshale.
* (DTLS only, no effect on TLS.)
*
* \param conf SSL configuration
* \param min Initial timeout value in milliseconds.
* Default: 1000 (1 second).
* \param max Maximum timeout value in milliseconds.
* Default: 60000 (60 seconds).
*
* \note Default values are from RFC 6347 section 4.2.4.1.
*
* \note Higher values for initial timeout may increase average
* handshake latency. Lower values may increase the risk of
* network congestion by causing more retransmissions.
*/
void mbedtls_ssl_conf_handshake_timeout( mbedtls_ssl_config *conf, uint32_t min, uint32_t max );
#endif /* MBEDTLS_SSL_PROTO_DTLS */
#if defined(MBEDTLS_SSL_SRV_C)
/**
* \brief Set the session cache callbacks (server-side only)
* If not set, no session resuming is done (except if session
* tickets are enabled too).
*
* The session cache has the responsibility to check for stale
* entries based on timeout. See RFC 5246 for recommendations.
*
* Warning: session.peer_cert is cleared by the SSL/TLS layer on
* connection shutdown, so do not cache the pointer! Either set
* it to NULL or make a full copy of the certificate.
*
* The get callback is called once during the initial handshake
* to enable session resuming. The get function has the
* following parameters: (void *parameter, mbedtls_ssl_session *session)
* If a valid entry is found, it should fill the master of
* the session object with the cached values and return 0,
* return 1 otherwise. Optionally peer_cert can be set as well
* if it is properly present in cache entry.
*
* The set callback is called once during the initial handshake
* to enable session resuming after the entire handshake has
* been finished. The set function has the following parameters:
* (void *parameter, const mbedtls_ssl_session *session). The function
* should create a cache entry for future retrieval based on
* the data in the session structure and should keep in mind
* that the mbedtls_ssl_session object presented (and all its referenced
* data) is cleared by the SSL/TLS layer when the connection is
* terminated. It is recommended to add metadata to determine if
* an entry is still valid in the future. Return 0 if
* successfully cached, return 1 otherwise.
*
* \param conf SSL configuration
* \param p_cache parmater (context) for both callbacks
* \param f_get_cache session get callback
* \param f_set_cache session set callback
*/
void mbedtls_ssl_conf_session_cache( mbedtls_ssl_config *conf,
void *p_cache,
int (*f_get_cache)(void *, mbedtls_ssl_session *),
int (*f_set_cache)(void *, const mbedtls_ssl_session *) );
#endif /* MBEDTLS_SSL_SRV_C */
#if defined(MBEDTLS_SSL_CLI_C)
/**
* \brief Request resumption of session (client-side only)
* Session data is copied from presented session structure.
*
* \param ssl SSL context
* \param session session context
*
* \return 0 if successful,
* MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or
* arguments are otherwise invalid
*
* \sa mbedtls_ssl_get_session()
*/
int mbedtls_ssl_set_session( mbedtls_ssl_context *ssl, const mbedtls_ssl_session *session );
#endif /* MBEDTLS_SSL_CLI_C */
/**
* \brief Set the list of allowed ciphersuites and the preference
* order. First in the list has the highest preference.
* (Overrides all version specific lists)
*
* The ciphersuites array is not copied, and must remain
* valid for the lifetime of the ssl_config.
*
* Note: The server uses its own preferences
* over the preference of the client unless
* MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE is defined!
*
* \param conf SSL configuration
* \param ciphersuites 0-terminated list of allowed ciphersuites
*/
void mbedtls_ssl_conf_ciphersuites( mbedtls_ssl_config *conf,
const int *ciphersuites );
/**
* \brief Set the list of allowed ciphersuites and the
* preference order for a specific version of the protocol.
* (Only useful on the server side)
*
* The ciphersuites array is not copied, and must remain
* valid for the lifetime of the ssl_config.
*
* \param conf SSL configuration
* \param ciphersuites 0-terminated list of allowed ciphersuites
* \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3
* supported)
* \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0,
* MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2,
* MBEDTLS_SSL_MINOR_VERSION_3 supported)
*
* \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0
* and MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2
*/
void mbedtls_ssl_conf_ciphersuites_for_version( mbedtls_ssl_config *conf,
const int *ciphersuites,
int major, int minor );
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* \brief Set the X.509 security profile used for verification
*
* \note The restrictions are enforced for all certificates in the
* chain. However, signatures in the handshake are not covered
* by this setting but by \b mbedtls_ssl_conf_sig_hashes().
*
* \param conf SSL configuration
* \param profile Profile to use
*/
void mbedtls_ssl_conf_cert_profile( mbedtls_ssl_config *conf,
const mbedtls_x509_crt_profile *profile );
/**
* \brief Set the data required to verify peer certificate
*
* \param conf SSL configuration
* \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs)
* \param ca_crl trusted CA CRLs
*/
void mbedtls_ssl_conf_ca_chain( mbedtls_ssl_config *conf,
mbedtls_x509_crt *ca_chain,
mbedtls_x509_crl *ca_crl );
/**
* \brief Set own certificate chain and private key
*
* \note own_cert should contain in order from the bottom up your
* certificate chain. The top certificate (self-signed)
* can be omitted.
*
* \note On server, this function can be called multiple times to
* provision more than one cert/key pair (eg one ECDSA, one
* RSA with SHA-256, one RSA with SHA-1). An adequate
* certificate will be selected according to the client's
* advertised capabilities. In case mutliple certificates are
* adequate, preference is given to the one set by the first
* call to this function, then second, etc.
*
* \note On client, only the first call has any effect.
*
* \param conf SSL configuration
* \param own_cert own public certificate chain
* \param pk_key own private key
*
* \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED
*/
int mbedtls_ssl_conf_own_cert( mbedtls_ssl_config *conf,
mbedtls_x509_crt *own_cert,
mbedtls_pk_context *pk_key );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
/**
* \brief Set the Pre Shared Key (PSK) and the expected identity name
*
* \note This is mainly useful for clients. Servers will usually
* want to use \c mbedtls_ssl_conf_psk_cb() instead.
*
* \param conf SSL configuration
* \param psk pointer to the pre-shared key
* \param psk_len pre-shared key length
* \param psk_identity pointer to the pre-shared key identity
* \param psk_identity_len identity key length
*
* \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED
*/
int mbedtls_ssl_conf_psk( mbedtls_ssl_config *conf,
const unsigned char *psk, size_t psk_len,
const unsigned char *psk_identity, size_t psk_identity_len );
/**
* \brief Set the Pre Shared Key (PSK) for the current handshake
*
* \note This should only be called inside the PSK callback,
* ie the function passed to \c mbedtls_ssl_conf_psk_cb().
*
* \param ssl SSL context
* \param psk pointer to the pre-shared key
* \param psk_len pre-shared key length
*
* \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED
*/
int mbedtls_ssl_set_hs_psk( mbedtls_ssl_context *ssl,
const unsigned char *psk, size_t psk_len );
/**
* \brief Set the PSK callback (server-side only).
*
* If set, the PSK callback is called for each
* handshake where a PSK ciphersuite was negotiated.
* The caller provides the identity received and wants to
* receive the actual PSK data and length.
*
* The callback has the following parameters: (void *parameter,
* mbedtls_ssl_context *ssl, const unsigned char *psk_identity,
* size_t identity_len)
* If a valid PSK identity is found, the callback should use
* \c mbedtls_ssl_set_hs_psk() on the ssl context to set the
* correct PSK and return 0.
* Any other return value will result in a denied PSK identity.
*
* \note If you set a PSK callback using this function, then you
* don't need to set a PSK key and identity using
* \c mbedtls_ssl_conf_psk().
*
* \param conf SSL configuration
* \param f_psk PSK identity function
* \param p_psk PSK identity parameter
*/
void mbedtls_ssl_conf_psk_cb( mbedtls_ssl_config *conf,
int (*f_psk)(void *, mbedtls_ssl_context *, const unsigned char *,
size_t),
void *p_psk );
#endif /* MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED */
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_SRV_C)
/**
* \brief Set the Diffie-Hellman public P and G values,
* read as hexadecimal strings (server-side only)
* (Default: MBEDTLS_DHM_RFC5114_MODP_2048_[PG])
*
* \param conf SSL configuration
* \param dhm_P Diffie-Hellman-Merkle modulus
* \param dhm_G Diffie-Hellman-Merkle generator
*
* \return 0 if successful
*/
int mbedtls_ssl_conf_dh_param( mbedtls_ssl_config *conf, const char *dhm_P, const char *dhm_G );
/**
* \brief Set the Diffie-Hellman public P and G values,
* read from existing context (server-side only)
*
* \param conf SSL configuration
* \param dhm_ctx Diffie-Hellman-Merkle context
*
* \return 0 if successful
*/
int mbedtls_ssl_conf_dh_param_ctx( mbedtls_ssl_config *conf, mbedtls_dhm_context *dhm_ctx );
#endif /* MBEDTLS_DHM_C && defined(MBEDTLS_SSL_SRV_C) */
#if defined(MBEDTLS_DHM_C) && defined(MBEDTLS_SSL_CLI_C)
/**
* \brief Set the minimum length for Diffie-Hellman parameters.
* (Client-side only.)
* (Default: 1024 bits.)
*
* \param conf SSL configuration
* \param bitlen Minimum bit length of the DHM prime
*/
void mbedtls_ssl_conf_dhm_min_bitlen( mbedtls_ssl_config *conf,
unsigned int bitlen );
#endif /* MBEDTLS_DHM_C && MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_ECP_C)
/**
* \brief Set the allowed curves in order of preference.
* (Default: all defined curves.)
*
* On server: this only affects selection of the ECDHE curve;
* the curves used for ECDH and ECDSA are determined by the
* list of available certificates instead.
*
* On client: this affects the list of curves offered for any
* use. The server can override our preference order.
*
* Both sides: limits the set of curves accepted for use in
* ECDHE and in the peer's end-entity certificate.
*
* \note This has no influence on which curves are allowed inside the
* certificate chains, see \c mbedtls_ssl_conf_cert_profile()
* for that. For the end-entity certificate however, the key
* will be accepted only if it is allowed both by this list
* and by the cert profile.
*
* \note This list should be ordered by decreasing preference
* (preferred curve first).
*
* \param conf SSL configuration
* \param curves Ordered list of allowed curves,
* terminated by MBEDTLS_ECP_DP_NONE.
*/
void mbedtls_ssl_conf_curves( mbedtls_ssl_config *conf,
const mbedtls_ecp_group_id *curves );
#endif /* MBEDTLS_ECP_C */
#if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED)
/**
* \brief Set the allowed hashes for signatures during the handshake.
* (Default: all available hashes except MD5.)
*
* \note This only affects which hashes are offered and can be used
* for signatures during the handshake. Hashes for message
* authentication and the TLS PRF are controlled by the
* ciphersuite, see \c mbedtls_ssl_conf_ciphersuites(). Hashes
* used for certificate signature are controlled by the
* verification profile, see \c mbedtls_ssl_conf_cert_profile().
*
* \note This list should be ordered by decreasing preference
* (preferred hash first).
*
* \param conf SSL configuration
* \param hashes Ordered list of allowed signature hashes,
* terminated by \c MBEDTLS_MD_NONE.
*/
void mbedtls_ssl_conf_sig_hashes( mbedtls_ssl_config *conf,
const int *hashes );
#endif /* MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* \brief Set hostname for ServerName TLS extension
* (client-side only)
*
*
* \param ssl SSL context
* \param hostname the server hostname
*
* \return 0 if successful or MBEDTLS_ERR_SSL_ALLOC_FAILED
*/
int mbedtls_ssl_set_hostname( mbedtls_ssl_context *ssl, const char *hostname );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
/**
* \brief Set own certificate and key for the current handshake
*
* \note Same as \c mbedtls_ssl_conf_own_cert() but for use within
* the SNI callback.
*
* \param ssl SSL context
* \param own_cert own public certificate chain
* \param pk_key own private key
*
* \return 0 on success or MBEDTLS_ERR_SSL_ALLOC_FAILED
*/
int mbedtls_ssl_set_hs_own_cert( mbedtls_ssl_context *ssl,
mbedtls_x509_crt *own_cert,
mbedtls_pk_context *pk_key );
/**
* \brief Set the data required to verify peer certificate for the
* current handshake
*
* \note Same as \c mbedtls_ssl_conf_ca_chain() but for use within
* the SNI callback.
*
* \param ssl SSL context
* \param ca_chain trusted CA chain (meaning all fully trusted top-level CAs)
* \param ca_crl trusted CA CRLs
*/
void mbedtls_ssl_set_hs_ca_chain( mbedtls_ssl_context *ssl,
mbedtls_x509_crt *ca_chain,
mbedtls_x509_crl *ca_crl );
/**
* \brief Set authmode for the current handshake.
*
* \note Same as \c mbedtls_ssl_conf_authmode() but for use within
* the SNI callback.
*
* \param ssl SSL context
* \param authmode MBEDTLS_SSL_VERIFY_NONE, MBEDTLS_SSL_VERIFY_OPTIONAL or
* MBEDTLS_SSL_VERIFY_REQUIRED
*/
void mbedtls_ssl_set_hs_authmode( mbedtls_ssl_context *ssl,
int authmode );
/**
* \brief Set server side ServerName TLS extension callback
* (optional, server-side only).
*
* If set, the ServerName callback is called whenever the
* server receives a ServerName TLS extension from the client
* during a handshake. The ServerName callback has the
* following parameters: (void *parameter, mbedtls_ssl_context *ssl,
* const unsigned char *hostname, size_t len). If a suitable
* certificate is found, the callback must set the
* certificate(s) and key(s) to use with \c
* mbedtls_ssl_set_hs_own_cert() (can be called repeatedly),
* and may optionally adjust the CA and associated CRL with \c
* mbedtls_ssl_set_hs_ca_chain() as well as the client
* authentication mode with \c mbedtls_ssl_set_hs_authmode(),
* then must return 0. If no matching name is found, the
* callback must either set a default cert, or
* return non-zero to abort the handshake at this point.
*
* \param conf SSL configuration
* \param f_sni verification function
* \param p_sni verification parameter
*/
void mbedtls_ssl_conf_sni( mbedtls_ssl_config *conf,
int (*f_sni)(void *, mbedtls_ssl_context *, const unsigned char *,
size_t),
void *p_sni );
#endif /* MBEDTLS_SSL_SERVER_NAME_INDICATION */
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
/**
* \brief Set the EC J-PAKE password for current handshake.
*
* \note An internal copy is made, and destroyed as soon as the
* handshake is completed, or when the SSL context is reset or
* freed.
*
* \note The SSL context needs to be already set up. The right place
* to call this function is between \c mbedtls_ssl_setup() or
* \c mbedtls_ssl_reset() and \c mbedtls_ssl_handshake().
*
* \param ssl SSL context
* \param pw EC J-PAKE password (pre-shared secret)
* \param pw_len length of pw in bytes
*
* \return 0 on success, or a negative error code.
*/
int mbedtls_ssl_set_hs_ecjpake_password( mbedtls_ssl_context *ssl,
const unsigned char *pw,
size_t pw_len );
#endif /*MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED */
#if defined(MBEDTLS_SSL_ALPN)
/**
* \brief Set the supported Application Layer Protocols.
*
* \param conf SSL configuration
* \param protos NULL-terminated list of supported protocols,
* in decreasing preference order.
*
* \return 0 on success, or MBEDTLS_ERR_SSL_BAD_INPUT_DATA.
*/
int mbedtls_ssl_conf_alpn_protocols( mbedtls_ssl_config *conf, const char **protos );
/**
* \brief Get the name of the negotiated Application Layer Protocol.
* This function should be called after the handshake is
* completed.
*
* \param ssl SSL context
*
* \return Protcol name, or NULL if no protocol was negotiated.
*/
const char *mbedtls_ssl_get_alpn_protocol( const mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_ALPN */
/**
* \brief Set the maximum supported version sent from the client side
* and/or accepted at the server side
* (Default: MBEDTLS_SSL_MAX_MAJOR_VERSION, MBEDTLS_SSL_MAX_MINOR_VERSION)
*
* \note This ignores ciphersuites from higher versions.
*
* \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and
* MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2
*
* \param conf SSL configuration
* \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported)
* \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0,
* MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2,
* MBEDTLS_SSL_MINOR_VERSION_3 supported)
*/
void mbedtls_ssl_conf_max_version( mbedtls_ssl_config *conf, int major, int minor );
/**
* \brief Set the minimum accepted SSL/TLS protocol version
* (Default: TLS 1.0)
*
* \note Input outside of the SSL_MAX_XXXXX_VERSION and
* SSL_MIN_XXXXX_VERSION range is ignored.
*
* \note MBEDTLS_SSL_MINOR_VERSION_0 (SSL v3) should be avoided.
*
* \note With DTLS, use MBEDTLS_SSL_MINOR_VERSION_2 for DTLS 1.0 and
* MBEDTLS_SSL_MINOR_VERSION_3 for DTLS 1.2
*
* \param conf SSL configuration
* \param major Major version number (only MBEDTLS_SSL_MAJOR_VERSION_3 supported)
* \param minor Minor version number (MBEDTLS_SSL_MINOR_VERSION_0,
* MBEDTLS_SSL_MINOR_VERSION_1 and MBEDTLS_SSL_MINOR_VERSION_2,
* MBEDTLS_SSL_MINOR_VERSION_3 supported)
*/
void mbedtls_ssl_conf_min_version( mbedtls_ssl_config *conf, int major, int minor );
#if defined(MBEDTLS_SSL_FALLBACK_SCSV) && defined(MBEDTLS_SSL_CLI_C)
/**
* \brief Set the fallback flag (client-side only).
* (Default: MBEDTLS_SSL_IS_NOT_FALLBACK).
*
* \note Set to MBEDTLS_SSL_IS_FALLBACK when preparing a fallback
* connection, that is a connection with max_version set to a
* lower value than the value you're willing to use. Such
* fallback connections are not recommended but are sometimes
* necessary to interoperate with buggy (version-intolerant)
* servers.
*
* \warning You should NOT set this to MBEDTLS_SSL_IS_FALLBACK for
* non-fallback connections! This would appear to work for a
* while, then cause failures when the server is upgraded to
* support a newer TLS version.
*
* \param conf SSL configuration
* \param fallback MBEDTLS_SSL_IS_NOT_FALLBACK or MBEDTLS_SSL_IS_FALLBACK
*/
void mbedtls_ssl_conf_fallback( mbedtls_ssl_config *conf, char fallback );
#endif /* MBEDTLS_SSL_FALLBACK_SCSV && MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_SSL_ENCRYPT_THEN_MAC)
/**
* \brief Enable or disable Encrypt-then-MAC
* (Default: MBEDTLS_SSL_ETM_ENABLED)
*
* \note This should always be enabled, it is a security
* improvement, and should not cause any interoperability
* issue (used only if the peer supports it too).
*
* \param conf SSL configuration
* \param etm MBEDTLS_SSL_ETM_ENABLED or MBEDTLS_SSL_ETM_DISABLED
*/
void mbedtls_ssl_conf_encrypt_then_mac( mbedtls_ssl_config *conf, char etm );
#endif /* MBEDTLS_SSL_ENCRYPT_THEN_MAC */
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
/**
* \brief Enable or disable Extended Master Secret negotiation.
* (Default: MBEDTLS_SSL_EXTENDED_MS_ENABLED)
*
* \note This should always be enabled, it is a security fix to the
* protocol, and should not cause any interoperability issue
* (used only if the peer supports it too).
*
* \param conf SSL configuration
* \param ems MBEDTLS_SSL_EXTENDED_MS_ENABLED or MBEDTLS_SSL_EXTENDED_MS_DISABLED
*/
void mbedtls_ssl_conf_extended_master_secret( mbedtls_ssl_config *conf, char ems );
#endif /* MBEDTLS_SSL_EXTENDED_MASTER_SECRET */
#if defined(MBEDTLS_ARC4_C)
/**
* \brief Disable or enable support for RC4
* (Default: MBEDTLS_SSL_ARC4_DISABLED)
*
* \warning Use of RC4 in (D)TLS has been prohibited by RFC ????
* for security reasons. Use at your own risks.
*
* \note This function will likely be removed in future versions as
* RC4 will then be disabled by default at compile time.
*
* \param conf SSL configuration
* \param arc4 MBEDTLS_SSL_ARC4_ENABLED or MBEDTLS_SSL_ARC4_DISABLED
*/
void mbedtls_ssl_conf_arc4_support( mbedtls_ssl_config *conf, char arc4 );
#endif /* MBEDTLS_ARC4_C */
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
/**
* \brief Set the maximum fragment length to emit and/or negotiate
* (Default: MBEDTLS_SSL_MAX_CONTENT_LEN, usually 2^14 bytes)
* (Server: set maximum fragment length to emit,
* usually negotiated by the client during handshake
* (Client: set maximum fragment length to emit *and*
* negotiate with the server during handshake)
*
* \param conf SSL configuration
* \param mfl_code Code for maximum fragment length (allowed values:
* MBEDTLS_SSL_MAX_FRAG_LEN_512, MBEDTLS_SSL_MAX_FRAG_LEN_1024,
* MBEDTLS_SSL_MAX_FRAG_LEN_2048, MBEDTLS_SSL_MAX_FRAG_LEN_4096)
*
* \return 0 if successful or MBEDTLS_ERR_SSL_BAD_INPUT_DATA
*/
int mbedtls_ssl_conf_max_frag_len( mbedtls_ssl_config *conf, unsigned char mfl_code );
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
#if defined(MBEDTLS_SSL_TRUNCATED_HMAC)
/**
* \brief Activate negotiation of truncated HMAC
* (Default: MBEDTLS_SSL_TRUNC_HMAC_DISABLED)
*
* \param conf SSL configuration
* \param truncate Enable or disable (MBEDTLS_SSL_TRUNC_HMAC_ENABLED or
* MBEDTLS_SSL_TRUNC_HMAC_DISABLED)
*/
void mbedtls_ssl_conf_truncated_hmac( mbedtls_ssl_config *conf, int truncate );
#endif /* MBEDTLS_SSL_TRUNCATED_HMAC */
#if defined(MBEDTLS_SSL_CBC_RECORD_SPLITTING)
/**
* \brief Enable / Disable 1/n-1 record splitting
* (Default: MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED)
*
* \note Only affects SSLv3 and TLS 1.0, not higher versions.
* Does not affect non-CBC ciphersuites in any version.
*
* \param conf SSL configuration
* \param split MBEDTLS_SSL_CBC_RECORD_SPLITTING_ENABLED or
* MBEDTLS_SSL_CBC_RECORD_SPLITTING_DISABLED
*/
void mbedtls_ssl_conf_cbc_record_splitting( mbedtls_ssl_config *conf, char split );
#endif /* MBEDTLS_SSL_CBC_RECORD_SPLITTING */
#if defined(MBEDTLS_SSL_SESSION_TICKETS) && defined(MBEDTLS_SSL_CLI_C)
/**
* \brief Enable / Disable session tickets (client only).
* (Default: MBEDTLS_SSL_SESSION_TICKETS_ENABLED.)
*
* \note On server, use \c mbedtls_ssl_conf_session_tickets_cb().
*
* \param conf SSL configuration
* \param use_tickets Enable or disable (MBEDTLS_SSL_SESSION_TICKETS_ENABLED or
* MBEDTLS_SSL_SESSION_TICKETS_DISABLED)
*/
void mbedtls_ssl_conf_session_tickets( mbedtls_ssl_config *conf, int use_tickets );
#endif /* MBEDTLS_SSL_SESSION_TICKETS && MBEDTLS_SSL_CLI_C */
#if defined(MBEDTLS_SSL_RENEGOTIATION)
/**
* \brief Enable / Disable renegotiation support for connection when
* initiated by peer
* (Default: MBEDTLS_SSL_RENEGOTIATION_DISABLED)
*
* \warning It is recommended to always disable renegotation unless you
* know you need it and you know what you're doing. In the
* past, there has been several issues associated with
* renegotiation or a poor understanding of its properties.
*
* \note Server-side, enabling renegotiation also makes the server
* susceptible to a resource DoS by a malicious client.
*
* \param conf SSL configuration
* \param renegotiation Enable or disable (MBEDTLS_SSL_RENEGOTIATION_ENABLED or
* MBEDTLS_SSL_RENEGOTIATION_DISABLED)
*/
void mbedtls_ssl_conf_renegotiation( mbedtls_ssl_config *conf, int renegotiation );
#endif /* MBEDTLS_SSL_RENEGOTIATION */
/**
* \brief Prevent or allow legacy renegotiation.
* (Default: MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION)
*
* MBEDTLS_SSL_LEGACY_NO_RENEGOTIATION allows connections to
* be established even if the peer does not support
* secure renegotiation, but does not allow renegotiation
* to take place if not secure.
* (Interoperable and secure option)
*
* MBEDTLS_SSL_LEGACY_ALLOW_RENEGOTIATION allows renegotiations
* with non-upgraded peers. Allowing legacy renegotiation
* makes the connection vulnerable to specific man in the
* middle attacks. (See RFC 5746)
* (Most interoperable and least secure option)
*
* MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE breaks off connections
* if peer does not support secure renegotiation. Results
* in interoperability issues with non-upgraded peers
* that do not support renegotiation altogether.
* (Most secure option, interoperability issues)
*
* \param conf SSL configuration
* \param allow_legacy Prevent or allow (SSL_NO_LEGACY_RENEGOTIATION,
* SSL_ALLOW_LEGACY_RENEGOTIATION or
* MBEDTLS_SSL_LEGACY_BREAK_HANDSHAKE)
*/
void mbedtls_ssl_conf_legacy_renegotiation( mbedtls_ssl_config *conf, int allow_legacy );
#if defined(MBEDTLS_SSL_RENEGOTIATION)
/**
* \brief Enforce renegotiation requests.
* (Default: enforced, max_records = 16)
*
* When we request a renegotiation, the peer can comply or
* ignore the request. This function allows us to decide
* whether to enforce our renegotiation requests by closing
* the connection if the peer doesn't comply.
*
* However, records could already be in transit from the peer
* when the request is emitted. In order to increase
* reliability, we can accept a number of records before the
* expected handshake records.
*
* The optimal value is highly dependent on the specific usage
* scenario.
*
* \note With DTLS and server-initiated renegotiation, the
* HelloRequest is retransmited every time mbedtls_ssl_read() times
* out or receives Application Data, until:
* - max_records records have beens seen, if it is >= 0, or
* - the number of retransmits that would happen during an
* actual handshake has been reached.
* Please remember the request might be lost a few times
* if you consider setting max_records to a really low value.
*
* \warning On client, the grace period can only happen during
* mbedtls_ssl_read(), as opposed to mbedtls_ssl_write() and mbedtls_ssl_renegotiate()
* which always behave as if max_record was 0. The reason is,
* if we receive application data from the server, we need a
* place to write it, which only happens during mbedtls_ssl_read().
*
* \param conf SSL configuration
* \param max_records Use MBEDTLS_SSL_RENEGOTIATION_NOT_ENFORCED if you don't want to
* enforce renegotiation, or a non-negative value to enforce
* it but allow for a grace period of max_records records.
*/
void mbedtls_ssl_conf_renegotiation_enforced( mbedtls_ssl_config *conf, int max_records );
/**
* \brief Set record counter threshold for periodic renegotiation.
* (Default: 2^64 - 256.)
*
* Renegotiation is automatically triggered when a record
* counter (outgoing or ingoing) crosses the defined
* threshold. The default value is meant to prevent the
* connection from being closed when the counter is about to
* reached its maximal value (it is not allowed to wrap).
*
* Lower values can be used to enforce policies such as "keys
* must be refreshed every N packets with cipher X".
*
* \param conf SSL configuration
* \param period The threshold value: a big-endian 64-bit number.
* Set to 2^64 - 1 to disable periodic renegotiation
*/
void mbedtls_ssl_conf_renegotiation_period( mbedtls_ssl_config *conf,
const unsigned char period[8] );
#endif /* MBEDTLS_SSL_RENEGOTIATION */
/**
* \brief Return the number of data bytes available to read
*
* \param ssl SSL context
*
* \return how many bytes are available in the read buffer
*/
size_t mbedtls_ssl_get_bytes_avail( const mbedtls_ssl_context *ssl );
/**
* \brief Return the result of the certificate verification
*
* \param ssl SSL context
*
* \return 0 if successful,
* -1 if result is not available (eg because the handshake was
* aborted too early), or
* a combination of BADCERT_xxx and BADCRL_xxx flags, see
* x509.h
*/
uint32_t mbedtls_ssl_get_verify_result( const mbedtls_ssl_context *ssl );
/**
* \brief Return the name of the current ciphersuite
*
* \param ssl SSL context
*
* \return a string containing the ciphersuite name
*/
const char *mbedtls_ssl_get_ciphersuite( const mbedtls_ssl_context *ssl );
/**
* \brief Return the current SSL version (SSLv3/TLSv1/etc)
*
* \param ssl SSL context
*
* \return a string containing the SSL version
*/
const char *mbedtls_ssl_get_version( const mbedtls_ssl_context *ssl );
/**
* \brief Return the (maximum) number of bytes added by the record
* layer: header + encryption/MAC overhead (inc. padding)
*
* \param ssl SSL context
*
* \return Current maximum record expansion in bytes, or
* MBEDTLS_ERR_SSL_FEATURE_UNAVAILABLE if compression is
* enabled, which makes expansion much less predictable
*/
int mbedtls_ssl_get_record_expansion( const mbedtls_ssl_context *ssl );
#if defined(MBEDTLS_SSL_MAX_FRAGMENT_LENGTH)
/**
* \brief Return the maximum fragment length (payload, in bytes).
* This is the value negotiated with peer if any,
* or the locally configured value.
*
* \note With DTLS, \c mbedtls_ssl_write() will return an error if
* called with a larger length value.
* With TLS, \c mbedtls_ssl_write() will fragment the input if
* necessary and return the number of bytes written; it is up
* to the caller to call \c mbedtls_ssl_write() again in
* order to send the remaining bytes if any.
*
* \param ssl SSL context
*
* \return Current maximum fragment length.
*/
size_t mbedtls_ssl_get_max_frag_len( const mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_MAX_FRAGMENT_LENGTH */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* \brief Return the peer certificate from the current connection
*
* Note: Can be NULL in case no certificate was sent during
* the handshake. Different calls for the same connection can
* return the same or different pointers for the same
* certificate and even a different certificate altogether.
* The peer cert CAN change in a single connection if
* renegotiation is performed.
*
* \param ssl SSL context
*
* \return the current peer certificate
*/
const mbedtls_x509_crt *mbedtls_ssl_get_peer_cert( const mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_CLI_C)
/**
* \brief Save session in order to resume it later (client-side only)
* Session data is copied to presented session structure.
*
* \warning Currently, peer certificate is lost in the operation.
*
* \param ssl SSL context
* \param session session context
*
* \return 0 if successful,
* MBEDTLS_ERR_SSL_ALLOC_FAILED if memory allocation failed,
* MBEDTLS_ERR_SSL_BAD_INPUT_DATA if used server-side or
* arguments are otherwise invalid
*
* \sa mbedtls_ssl_set_session()
*/
int mbedtls_ssl_get_session( const mbedtls_ssl_context *ssl, mbedtls_ssl_session *session );
#endif /* MBEDTLS_SSL_CLI_C */
/**
* \brief Perform the SSL handshake
*
* \param ssl SSL context
*
* \return 0 if successful, or
* MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or
* MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED (see below), or
* a specific SSL error code.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*
* \note If DTLS is in use, then you may choose to handle
* MBEDTLS_ERR_SSL_HELLO_VERIFY_REQUIRED specially for logging
* purposes, as it is an expected return value rather than an
* actual error, but you still need to reset/free the context.
*/
int mbedtls_ssl_handshake( mbedtls_ssl_context *ssl );
/**
* \brief Perform a single step of the SSL handshake
*
* \note The state of the context (ssl->state) will be at
* the following state after execution of this function.
* Do not call this function if state is MBEDTLS_SSL_HANDSHAKE_OVER.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*
* \param ssl SSL context
*
* \return 0 if successful, or
* MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or
* a specific SSL error code.
*/
int mbedtls_ssl_handshake_step( mbedtls_ssl_context *ssl );
#if defined(MBEDTLS_SSL_RENEGOTIATION)
/**
* \brief Initiate an SSL renegotiation on the running connection.
* Client: perform the renegotiation right now.
* Server: request renegotiation, which will be performed
* during the next call to mbedtls_ssl_read() if honored by client.
*
* \param ssl SSL context
*
* \return 0 if successful, or any mbedtls_ssl_handshake() return value.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*/
int mbedtls_ssl_renegotiate( mbedtls_ssl_context *ssl );
#endif /* MBEDTLS_SSL_RENEGOTIATION */
/**
* \brief Read at most 'len' application data bytes
*
* \param ssl SSL context
* \param buf buffer that will hold the data
* \param len maximum number of bytes to read
*
* \return the number of bytes read, or
* 0 for EOF, or
* MBEDTLS_ERR_SSL_WANT_READ or MBEDTLS_ERR_SSL_WANT_WRITE, or
* MBEDTLS_ERR_SSL_CLIENT_RECONNECT (see below), or
* another negative error code.
*
* \note If this function returns something other than a positive
* value or MBEDTLS_ERR_SSL_WANT_READ/WRITE or
* MBEDTLS_ERR_SSL_CLIENT_RECONNECT, then the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*
* \note When this function return MBEDTLS_ERR_SSL_CLIENT_RECONNECT
* (which can only happen server-side), it means that a client
* is initiating a new connection using the same source port.
* You can either treat that as a connection close and wait
* for the client to resend a ClientHello, or directly
* continue with \c mbedtls_ssl_handshake() with the same
* context (as it has beeen reset internally). Either way, you
* should make sure this is seen by the application as a new
* connection: application state, if any, should be reset, and
* most importantly the identity of the client must be checked
* again. WARNING: not validating the identity of the client
* again, or not transmitting the new identity to the
* application layer, would allow authentication bypass!
*/
int mbedtls_ssl_read( mbedtls_ssl_context *ssl, unsigned char *buf, size_t len );
/**
* \brief Try to write exactly 'len' application data bytes
*
* \warning This function will do partial writes in some cases. If the
* return value is non-negative but less than length, the
* function must be called again with updated arguments:
* buf + ret, len - ret (if ret is the return value) until
* it returns a value equal to the last 'len' argument.
*
* \param ssl SSL context
* \param buf buffer holding the data
* \param len how many bytes must be written
*
* \return the number of bytes actually written (may be less than len),
* or MBEDTLS_ERR_SSL_WANT_WRITE of MBEDTLS_ERR_SSL_WANT_READ,
* or another negative error code.
*
* \note If this function returns something other than a positive
* value or MBEDTLS_ERR_SSL_WANT_READ/WRITE, the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*
* \note When this function returns MBEDTLS_ERR_SSL_WANT_WRITE/READ,
* it must be called later with the *same* arguments,
* until it returns a positive value.
*
* \note If the requested length is greater than the maximum
* fragment length (either the built-in limit or the one set
* or negotiated with the peer), then:
* - with TLS, less bytes than requested are written.
* - with DTLS, MBEDTLS_ERR_SSL_BAD_INPUT_DATA is returned.
* \c mbedtls_ssl_get_max_frag_len() may be used to query the
* active maximum fragment length.
*/
int mbedtls_ssl_write( mbedtls_ssl_context *ssl, const unsigned char *buf, size_t len );
/**
* \brief Send an alert message
*
* \param ssl SSL context
* \param level The alert level of the message
* (MBEDTLS_SSL_ALERT_LEVEL_WARNING or MBEDTLS_SSL_ALERT_LEVEL_FATAL)
* \param message The alert message (SSL_ALERT_MSG_*)
*
* \return 0 if successful, or a specific SSL error code.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*/
int mbedtls_ssl_send_alert_message( mbedtls_ssl_context *ssl,
unsigned char level,
unsigned char message );
/**
* \brief Notify the peer that the connection is being closed
*
* \param ssl SSL context
*
* \return 0 if successful, or a specific SSL error code.
*
* \note If this function returns something other than 0 or
* MBEDTLS_ERR_SSL_WANT_READ/WRITE, then the ssl context
* becomes unusable, and you should either free it or call
* \c mbedtls_ssl_session_reset() on it before re-using it for
* a new connection; the current connection must be closed.
*/
int mbedtls_ssl_close_notify( mbedtls_ssl_context *ssl );
/**
* \brief Free referenced items in an SSL context and clear memory
*
* \param ssl SSL context
*/
void mbedtls_ssl_free( mbedtls_ssl_context *ssl );
/**
* \brief Initialize an SSL configuration context
* Just makes the context ready for
* mbedtls_ssl_config_defaults() or mbedtls_ssl_config_free().
*
* \note You need to call mbedtls_ssl_config_defaults() unless you
* manually set all of the relevent fields yourself.
*
* \param conf SSL configuration context
*/
void mbedtls_ssl_config_init( mbedtls_ssl_config *conf );
/**
* \brief Load reasonnable default SSL configuration values.
* (You need to call mbedtls_ssl_config_init() first.)
*
* \param conf SSL configuration context
* \param endpoint MBEDTLS_SSL_IS_CLIENT or MBEDTLS_SSL_IS_SERVER
* \param transport MBEDTLS_SSL_TRANSPORT_STREAM for TLS, or
* MBEDTLS_SSL_TRANSPORT_DATAGRAM for DTLS
* \param preset a MBEDTLS_SSL_PRESET_XXX value
* (currently unused).
*
* \note See \c mbedtls_ssl_conf_transport() for notes on DTLS.
*
* \return 0 if successful, or
* MBEDTLS_ERR_XXX_ALLOC_FAILED on memory allocation error.
*/
int mbedtls_ssl_config_defaults( mbedtls_ssl_config *conf,
int endpoint, int transport, int preset );
/**
* \brief Free an SSL configuration context
*
* \param conf SSL configuration context
*/
void mbedtls_ssl_config_free( mbedtls_ssl_config *conf );
/**
* \brief Initialize SSL session structure
*
* \param session SSL session
*/
void mbedtls_ssl_session_init( mbedtls_ssl_session *session );
/**
* \brief Free referenced items in an SSL session including the
* peer certificate and clear memory
*
* \param session SSL session
*/
void mbedtls_ssl_session_free( mbedtls_ssl_session *session );
#ifdef __cplusplus
}
#endif
#endif /* ssl.h */
/**
* \file ssl_cache.h
*
* \brief SSL session cache implementation
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SSL_CACHE_H
#define MBEDTLS_SSL_CACHE_H
#include "ssl.h"
#if defined(MBEDTLS_THREADING_C)
#include "threading.h"
#endif
/**
* \name SECTION: Module settings
*
* The configuration options you can set for this module are in this section.
* Either change them in config.h or define them on the compiler command line.
* \{
*/
#if !defined(MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT)
#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /*!< 1 day */
#endif
#if !defined(MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES)
#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /*!< Maximum entries in cache */
#endif
/* \} name SECTION: Module settings */
#ifdef __cplusplus
extern "C" {
#endif
typedef struct mbedtls_ssl_cache_context mbedtls_ssl_cache_context;
typedef struct mbedtls_ssl_cache_entry mbedtls_ssl_cache_entry;
/**
* \brief This structure is used for storing cache entries
*/
struct mbedtls_ssl_cache_entry
{
#if defined(MBEDTLS_HAVE_TIME)
time_t timestamp; /*!< entry timestamp */
#endif
mbedtls_ssl_session session; /*!< entry session */
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_x509_buf peer_cert; /*!< entry peer_cert */
#endif
mbedtls_ssl_cache_entry *next; /*!< chain pointer */
};
/**
* \brief Cache context
*/
struct mbedtls_ssl_cache_context
{
mbedtls_ssl_cache_entry *chain; /*!< start of the chain */
int timeout; /*!< cache entry timeout */
int max_entries; /*!< maximum entries */
#if defined(MBEDTLS_THREADING_C)
mbedtls_threading_mutex_t mutex; /*!< mutex */
#endif
};
/**
* \brief Initialize an SSL cache context
*
* \param cache SSL cache context
*/
void mbedtls_ssl_cache_init( mbedtls_ssl_cache_context *cache );
/**
* \brief Cache get callback implementation
* (Thread-safe if MBEDTLS_THREADING_C is enabled)
*
* \param data SSL cache context
* \param session session to retrieve entry for
*/
int mbedtls_ssl_cache_get( void *data, mbedtls_ssl_session *session );
/**
* \brief Cache set callback implementation
* (Thread-safe if MBEDTLS_THREADING_C is enabled)
*
* \param data SSL cache context
* \param session session to store entry for
*/
int mbedtls_ssl_cache_set( void *data, const mbedtls_ssl_session *session );
#if defined(MBEDTLS_HAVE_TIME)
/**
* \brief Set the cache timeout
* (Default: MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT (1 day))
*
* A timeout of 0 indicates no timeout.
*
* \param cache SSL cache context
* \param timeout cache entry timeout in seconds
*/
void mbedtls_ssl_cache_set_timeout( mbedtls_ssl_cache_context *cache, int timeout );
#endif /* MBEDTLS_HAVE_TIME */
/**
* \brief Set the maximum number of cache entries
* (Default: MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES (50))
*
* \param cache SSL cache context
* \param max cache entry maximum
*/
void mbedtls_ssl_cache_set_max_entries( mbedtls_ssl_cache_context *cache, int max );
/**
* \brief Free referenced items in a cache context and clear memory
*
* \param cache SSL cache context
*/
void mbedtls_ssl_cache_free( mbedtls_ssl_cache_context *cache );
#ifdef __cplusplus
}
#endif
#endif /* ssl_cache.h */
/**
* \file ssl_ciphersuites.h
*
* \brief SSL Ciphersuites for mbed TLS
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SSL_CIPHERSUITES_H
#define MBEDTLS_SSL_CIPHERSUITES_H
#include "pk.h"
#include "cipher.h"
#include "md.h"
#ifdef __cplusplus
extern "C" {
#endif
/*
* Supported ciphersuites (Official IANA names)
*/
#define MBEDTLS_TLS_RSA_WITH_NULL_MD5 0x01 /**< Weak! */
#define MBEDTLS_TLS_RSA_WITH_NULL_SHA 0x02 /**< Weak! */
#define MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 0x04
#define MBEDTLS_TLS_RSA_WITH_RC4_128_SHA 0x05
#define MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA 0x09 /**< Weak! Not in TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA 0x0A
#define MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA 0x15 /**< Weak! Not in TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA 0x16
#define MBEDTLS_TLS_PSK_WITH_NULL_SHA 0x2C /**< Weak! */
#define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA 0x2D /**< Weak! */
#define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA 0x2E /**< Weak! */
#define MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA 0x2F
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA 0x33
#define MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA 0x35
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA 0x39
#define MBEDTLS_TLS_RSA_WITH_NULL_SHA256 0x3B /**< Weak! */
#define MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 0x3C /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 0x3D /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA 0x41
#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA 0x45
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 0x67 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 0x6B /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA 0x84
#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA 0x88
#define MBEDTLS_TLS_PSK_WITH_RC4_128_SHA 0x8A
#define MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA 0x8B
#define MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA 0x8C
#define MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA 0x8D
#define MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA 0x8E
#define MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA 0x8F
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA 0x90
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA 0x91
#define MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA 0x92
#define MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA 0x93
#define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA 0x94
#define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA 0x95
#define MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 0x9C /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 0x9D /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 0x9E /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 0x9F /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 0xA8 /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 0xA9 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 0xAA /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 0xAB /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 0xAC /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 0xAD /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 0xAE
#define MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 0xAF
#define MBEDTLS_TLS_PSK_WITH_NULL_SHA256 0xB0 /**< Weak! */
#define MBEDTLS_TLS_PSK_WITH_NULL_SHA384 0xB1 /**< Weak! */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 0xB2
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 0xB3
#define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 0xB4 /**< Weak! */
#define MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 0xB5 /**< Weak! */
#define MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 0xB6
#define MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 0xB7
#define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 0xB8 /**< Weak! */
#define MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 0xB9 /**< Weak! */
#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xBA /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xBE /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 0xC0 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 0xC4 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA 0xC001 /**< Weak! */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA 0xC002 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA 0xC003 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA 0xC004 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA 0xC005 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA 0xC006 /**< Weak! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA 0xC007 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA 0xC008 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA 0xC009 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA 0xC00A /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA 0xC00B /**< Weak! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA 0xC00C /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA 0xC00D /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA 0xC00E /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA 0xC00F /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA 0xC010 /**< Weak! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA 0xC011 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA 0xC012 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA 0xC013 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA 0xC014 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 0xC023 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 0xC024 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 0xC025 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 0xC026 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 0xC027 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 0xC028 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 0xC029 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 0xC02A /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 0xC02B /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 0xC02C /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 0xC02D /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 0xC02E /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 0xC02F /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 0xC030 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 0xC031 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 0xC032 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA 0xC033 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA 0xC034 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA 0xC035 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA 0xC036 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 0xC037 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 0xC038 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA 0xC039 /**< Weak! No SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 0xC03A /**< Weak! No SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 0xC03B /**< Weak! No SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 0xC072 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 0xC073 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 0xC074 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 0xC075 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xC076 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 0xC077 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 0xC078 /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 0xC079 /**< Not in SSL3! */
#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC07A /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC07B /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC07C /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC07D /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 0xC086 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 0xC087 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 0xC088 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 0xC089 /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC08A /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC08B /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 0xC08C /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 0xC08D /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 0xC08E /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 0xC08F /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 0xC090 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 0xC091 /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 0xC092 /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 0xC093 /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC094
#define MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC095
#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC096
#define MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC097
#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC098
#define MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC099
#define MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 0xC09A /**< Not in SSL3! */
#define MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 0xC09B /**< Not in SSL3! */
#define MBEDTLS_TLS_RSA_WITH_AES_128_CCM 0xC09C /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_AES_256_CCM 0xC09D /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CCM 0xC09E /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CCM 0xC09F /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_AES_128_CCM_8 0xC0A0 /**< TLS 1.2 */
#define MBEDTLS_TLS_RSA_WITH_AES_256_CCM_8 0xC0A1 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CCM_8 0xC0A2 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CCM_8 0xC0A3 /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_128_CCM 0xC0A4 /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_256_CCM 0xC0A5 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CCM 0xC0A6 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CCM 0xC0A7 /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_128_CCM_8 0xC0A8 /**< TLS 1.2 */
#define MBEDTLS_TLS_PSK_WITH_AES_256_CCM_8 0xC0A9 /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CCM_8 0xC0AA /**< TLS 1.2 */
#define MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CCM_8 0xC0AB /**< TLS 1.2 */
/* The last two are named with PSK_DHE in the RFC, which looks like a typo */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM 0xC0AC /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM 0xC0AD /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CCM_8 0xC0AE /**< TLS 1.2 */
#define MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CCM_8 0xC0AF /**< TLS 1.2 */
#define MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 0xC0FF /**< experimental */
/* Reminder: update mbedtls_ssl_premaster_secret when adding a new key exchange.
* Reminder: update MBEDTLS_KEY_EXCHANGE__xxx below
*/
typedef enum {
MBEDTLS_KEY_EXCHANGE_NONE = 0,
MBEDTLS_KEY_EXCHANGE_RSA,
MBEDTLS_KEY_EXCHANGE_DHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_RSA,
MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA,
MBEDTLS_KEY_EXCHANGE_PSK,
MBEDTLS_KEY_EXCHANGE_DHE_PSK,
MBEDTLS_KEY_EXCHANGE_RSA_PSK,
MBEDTLS_KEY_EXCHANGE_ECDHE_PSK,
MBEDTLS_KEY_EXCHANGE_ECDH_RSA,
MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA,
MBEDTLS_KEY_EXCHANGE_ECJPAKE,
} mbedtls_key_exchange_type_t;
/* Key exchanges using a certificate */
#if defined(MBEDTLS_KEY_EXCHANGE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED)
#define MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED
#endif
/* Key exchanges using a PSK */
#if defined(MBEDTLS_KEY_EXCHANGE_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED)
#define MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED
#endif
/* Key exchanges using a ECDHE */
#if defined(MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED) || \
defined(MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED)
#define MBEDTLS_KEY_EXCHANGE__SOME__ECDHE_ENABLED
#endif
typedef struct mbedtls_ssl_ciphersuite_t mbedtls_ssl_ciphersuite_t;
#define MBEDTLS_CIPHERSUITE_WEAK 0x01 /**< Weak ciphersuite flag */
#define MBEDTLS_CIPHERSUITE_SHORT_TAG 0x02 /**< Short authentication tag,
eg for CCM_8 */
#define MBEDTLS_CIPHERSUITE_NODTLS 0x04 /**< Can't be used with DTLS */
/**
* \brief This structure is used for storing ciphersuite information
*/
struct mbedtls_ssl_ciphersuite_t
{
int id;
const char * name;
mbedtls_cipher_type_t cipher;
mbedtls_md_type_t mac;
mbedtls_key_exchange_type_t key_exchange;
int min_major_ver;
int min_minor_ver;
int max_major_ver;
int max_minor_ver;
unsigned char flags;
};
const int *mbedtls_ssl_list_ciphersuites( void );
const mbedtls_ssl_ciphersuite_t *mbedtls_ssl_ciphersuite_from_string( const char *ciphersuite_name );
const mbedtls_ssl_ciphersuite_t *mbedtls_ssl_ciphersuite_from_id( int ciphersuite_id );
#if defined(MBEDTLS_PK_C)
mbedtls_pk_type_t mbedtls_ssl_get_ciphersuite_sig_pk_alg( const mbedtls_ssl_ciphersuite_t *info );
#endif
int mbedtls_ssl_ciphersuite_uses_ec( const mbedtls_ssl_ciphersuite_t *info );
int mbedtls_ssl_ciphersuite_uses_psk( const mbedtls_ssl_ciphersuite_t *info );
#ifdef __cplusplus
}
#endif
#endif /* ssl_ciphersuites.h */
/**
* \file ssl_cookie.h
*
* \brief DTLS cookie callbacks implementation
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SSL_COOKIE_H
#define MBEDTLS_SSL_COOKIE_H
#include "ssl.h"
#if defined(MBEDTLS_THREADING_C)
#include "threading.h"
#endif
/**
* \name SECTION: Module settings
*
* The configuration options you can set for this module are in this section.
* Either change them in config.h or define them on the compiler command line.
* \{
*/
#ifndef MBEDTLS_SSL_COOKIE_TIMEOUT
#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
#endif
/* \} name SECTION: Module settings */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Context for the default cookie functions.
*/
typedef struct
{
mbedtls_md_context_t hmac_ctx; /*!< context for the HMAC portion */
#if !defined(MBEDTLS_HAVE_TIME)
unsigned long serial; /*!< serial number for expiration */
#endif
unsigned long timeout; /*!< timeout delay, in seconds if HAVE_TIME,
or in number of tickets issued */
#if defined(MBEDTLS_THREADING_C)
mbedtls_threading_mutex_t mutex;
#endif
} mbedtls_ssl_cookie_ctx;
/**
* \brief Initialize cookie context
*/
void mbedtls_ssl_cookie_init( mbedtls_ssl_cookie_ctx *ctx );
/**
* \brief Setup cookie context (generate keys)
*/
int mbedtls_ssl_cookie_setup( mbedtls_ssl_cookie_ctx *ctx,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
/**
* \brief Set expiration delay for cookies
* (Default MBEDTLS_SSL_COOKIE_TIMEOUT)
*
* \param ctx Cookie contex
* \param delay Delay, in seconds if HAVE_TIME, or in number of cookies
* issued in the meantime.
* 0 to disable expiration (NOT recommended)
*/
void mbedtls_ssl_cookie_set_timeout( mbedtls_ssl_cookie_ctx *ctx, unsigned long delay );
/**
* \brief Free cookie context
*/
void mbedtls_ssl_cookie_free( mbedtls_ssl_cookie_ctx *ctx );
/**
* \brief Generate cookie, see \c mbedtls_ssl_cookie_write_t
*/
mbedtls_ssl_cookie_write_t mbedtls_ssl_cookie_write;
/**
* \brief Verify cookie, see \c mbedtls_ssl_cookie_write_t
*/
mbedtls_ssl_cookie_check_t mbedtls_ssl_cookie_check;
#ifdef __cplusplus
}
#endif
#endif /* ssl_cookie.h */
/**
* \file ssl_ticket.h
*
* \brief Internal functions shared by the SSL modules
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SSL_INTERNAL_H
#define MBEDTLS_SSL_INTERNAL_H
#include "ssl.h"
#if defined(MBEDTLS_MD5_C)
#include "md5.h"
#endif
#if defined(MBEDTLS_SHA1_C)
#include "sha1.h"
#endif
#if defined(MBEDTLS_SHA256_C)
#include "sha256.h"
#endif
#if defined(MBEDTLS_SHA512_C)
#include "sha512.h"
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
#include "ecjpake.h"
#endif
#if ( defined(__ARMCC_VERSION) || defined(_MSC_VER) ) && \
!defined(inline) && !defined(__cplusplus)
#define inline __inline
#endif
/* Determine minimum supported version */
#define MBEDTLS_SSL_MIN_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
#if defined(MBEDTLS_SSL_PROTO_SSL3)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1_1)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#define MBEDTLS_SSL_MIN_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1 */
#endif /* MBEDTLS_SSL_PROTO_SSL3 */
/* Determine maximum supported version */
#define MBEDTLS_SSL_MAX_MAJOR_VERSION MBEDTLS_SSL_MAJOR_VERSION_3
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_3
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1_1)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_2
#else
#if defined(MBEDTLS_SSL_PROTO_TLS1)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_1
#else
#if defined(MBEDTLS_SSL_PROTO_SSL3)
#define MBEDTLS_SSL_MAX_MINOR_VERSION MBEDTLS_SSL_MINOR_VERSION_0
#endif /* MBEDTLS_SSL_PROTO_SSL3 */
#endif /* MBEDTLS_SSL_PROTO_TLS1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_1 */
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
#define MBEDTLS_SSL_INITIAL_HANDSHAKE 0
#define MBEDTLS_SSL_RENEGOTIATION_IN_PROGRESS 1 /* In progress */
#define MBEDTLS_SSL_RENEGOTIATION_DONE 2 /* Done or aborted */
#define MBEDTLS_SSL_RENEGOTIATION_PENDING 3 /* Requested (server only) */
/*
* DTLS retransmission states, see RFC 6347 4.2.4
*
* The SENDING state is merged in PREPARING for initial sends,
* but is distinct for resends.
*
* Note: initial state is wrong for server, but is not used anyway.
*/
#define MBEDTLS_SSL_RETRANS_PREPARING 0
#define MBEDTLS_SSL_RETRANS_SENDING 1
#define MBEDTLS_SSL_RETRANS_WAITING 2
#define MBEDTLS_SSL_RETRANS_FINISHED 3
/*
* Allow extra bytes for record, authentication and encryption overhead:
* counter (8) + header (5) + IV(16) + MAC (16-48) + padding (0-256)
* and allow for a maximum of 1024 of compression expansion if
* enabled.
*/
#if defined(MBEDTLS_ZLIB_SUPPORT)
#define MBEDTLS_SSL_COMPRESSION_ADD 1024
#else
#define MBEDTLS_SSL_COMPRESSION_ADD 0
#endif
#if defined(MBEDTLS_ARC4_C) || defined(MBEDTLS_CIPHER_MODE_CBC)
/* Ciphersuites using HMAC */
#if defined(MBEDTLS_SHA512_C)
#define MBEDTLS_SSL_MAC_ADD 48 /* SHA-384 used for HMAC */
#elif defined(MBEDTLS_SHA256_C)
#define MBEDTLS_SSL_MAC_ADD 32 /* SHA-256 used for HMAC */
#else
#define MBEDTLS_SSL_MAC_ADD 20 /* SHA-1 used for HMAC */
#endif
#else
/* AEAD ciphersuites: GCM and CCM use a 128 bits tag */
#define MBEDTLS_SSL_MAC_ADD 16
#endif
#if defined(MBEDTLS_CIPHER_MODE_CBC)
#define MBEDTLS_SSL_PADDING_ADD 256
#else
#define MBEDTLS_SSL_PADDING_ADD 0
#endif
#define MBEDTLS_SSL_BUFFER_LEN ( MBEDTLS_SSL_MAX_CONTENT_LEN \
+ MBEDTLS_SSL_COMPRESSION_ADD \
+ 29 /* counter + header + IV */ \
+ MBEDTLS_SSL_MAC_ADD \
+ MBEDTLS_SSL_PADDING_ADD \
)
/*
* TLS extension flags (for extensions with outgoing ServerHello content
* that need it (e.g. for RENEGOTIATION_INFO the server already knows because
* of state of the renegotiation flag, so no indicator is required)
*/
#define MBEDTLS_TLS_EXT_SUPPORTED_POINT_FORMATS_PRESENT (1 << 0)
#define MBEDTLS_TLS_EXT_ECJPAKE_KKPP_OK (1 << 1)
#ifdef __cplusplus
extern "C" {
#endif
/*
* This structure contains the parameters only needed during handshake.
*/
struct mbedtls_ssl_handshake_params
{
/*
* Handshake specific crypto variables
*/
int sig_alg; /*!< Hash algorithm for signature */
int cert_type; /*!< Requested cert type */
int verify_sig_alg; /*!< Signature algorithm for verify */
#if defined(MBEDTLS_DHM_C)
mbedtls_dhm_context dhm_ctx; /*!< DHM key exchange */
#endif
#if defined(MBEDTLS_ECDH_C)
mbedtls_ecdh_context ecdh_ctx; /*!< ECDH key exchange */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
mbedtls_ecjpake_context ecjpake_ctx; /*!< EC J-PAKE key exchange */
#if defined(MBEDTLS_SSL_CLI_C)
unsigned char *ecjpake_cache; /*!< Cache for ClientHello ext */
size_t ecjpake_cache_len; /*!< Length of cached data */
#endif
#endif
#if defined(MBEDTLS_ECDH_C) || defined(MBEDTLS_ECDSA_C) || \
defined(MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED)
const mbedtls_ecp_curve_info **curves; /*!< Supported elliptic curves */
#endif
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
unsigned char *psk; /*!< PSK from the callback */
size_t psk_len; /*!< Length of PSK from callback */
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
mbedtls_ssl_key_cert *key_cert; /*!< chosen key/cert pair (server) */
#if defined(MBEDTLS_SSL_SERVER_NAME_INDICATION)
int sni_authmode; /*!< authmode from SNI callback */
mbedtls_ssl_key_cert *sni_key_cert; /*!< key/cert list from SNI */
mbedtls_x509_crt *sni_ca_chain; /*!< trusted CAs from SNI callback */
mbedtls_x509_crl *sni_ca_crl; /*!< trusted CAs CRLs from SNI */
#endif
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
unsigned int out_msg_seq; /*!< Outgoing handshake sequence number */
unsigned int in_msg_seq; /*!< Incoming handshake sequence number */
unsigned char *verify_cookie; /*!< Cli: HelloVerifyRequest cookie
Srv: unused */
unsigned char verify_cookie_len; /*!< Cli: cookie length
Srv: flag for sending a cookie */
unsigned char *hs_msg; /*!< Reassembled handshake message */
uint32_t retransmit_timeout; /*!< Current value of timeout */
unsigned char retransmit_state; /*!< Retransmission state */
mbedtls_ssl_flight_item *flight; /*!< Current outgoing flight */
mbedtls_ssl_flight_item *cur_msg; /*!< Current message in flight */
unsigned int in_flight_start_seq; /*!< Minimum message sequence in the
flight being received */
mbedtls_ssl_transform *alt_transform_out; /*!< Alternative transform for
resending messages */
unsigned char alt_out_ctr[8]; /*!< Alternative record epoch/counter
for resending messages */
#endif
/*
* Checksum contexts
*/
#if defined(MBEDTLS_SSL_PROTO_SSL3) || defined(MBEDTLS_SSL_PROTO_TLS1) || \
defined(MBEDTLS_SSL_PROTO_TLS1_1)
mbedtls_md5_context fin_md5;
mbedtls_sha1_context fin_sha1;
#endif
#if defined(MBEDTLS_SSL_PROTO_TLS1_2)
#if defined(MBEDTLS_SHA256_C)
mbedtls_sha256_context fin_sha256;
#endif
#if defined(MBEDTLS_SHA512_C)
mbedtls_sha512_context fin_sha512;
#endif
#endif /* MBEDTLS_SSL_PROTO_TLS1_2 */
void (*update_checksum)(mbedtls_ssl_context *, const unsigned char *, size_t);
void (*calc_verify)(mbedtls_ssl_context *, unsigned char *);
void (*calc_finished)(mbedtls_ssl_context *, unsigned char *, int);
int (*tls_prf)(const unsigned char *, size_t, const char *,
const unsigned char *, size_t,
unsigned char *, size_t);
size_t pmslen; /*!< premaster length */
unsigned char randbytes[64]; /*!< random bytes */
unsigned char premaster[MBEDTLS_PREMASTER_SIZE];
/*!< premaster secret */
int resume; /*!< session resume indicator*/
int max_major_ver; /*!< max. major version client*/
int max_minor_ver; /*!< max. minor version client*/
int cli_exts; /*!< client extension presence*/
#if defined(MBEDTLS_SSL_SESSION_TICKETS)
int new_session_ticket; /*!< use NewSessionTicket? */
#endif /* MBEDTLS_SSL_SESSION_TICKETS */
#if defined(MBEDTLS_SSL_EXTENDED_MASTER_SECRET)
int extended_ms; /*!< use Extended Master Secret? */
#endif
};
/*
* This structure contains a full set of runtime transform parameters
* either in negotiation or active.
*/
struct mbedtls_ssl_transform
{
/*
* Session specific crypto layer
*/
const mbedtls_ssl_ciphersuite_t *ciphersuite_info;
/*!< Chosen cipersuite_info */
unsigned int keylen; /*!< symmetric key length (bytes) */
size_t minlen; /*!< min. ciphertext length */
size_t ivlen; /*!< IV length */
size_t fixed_ivlen; /*!< Fixed part of IV (AEAD) */
size_t maclen; /*!< MAC length */
unsigned char iv_enc[16]; /*!< IV (encryption) */
unsigned char iv_dec[16]; /*!< IV (decryption) */
#if defined(MBEDTLS_SSL_PROTO_SSL3)
/* Needed only for SSL v3.0 secret */
unsigned char mac_enc[20]; /*!< SSL v3.0 secret (enc) */
unsigned char mac_dec[20]; /*!< SSL v3.0 secret (dec) */
#endif /* MBEDTLS_SSL_PROTO_SSL3 */
mbedtls_md_context_t md_ctx_enc; /*!< MAC (encryption) */
mbedtls_md_context_t md_ctx_dec; /*!< MAC (decryption) */
mbedtls_cipher_context_t cipher_ctx_enc; /*!< encryption context */
mbedtls_cipher_context_t cipher_ctx_dec; /*!< decryption context */
/*
* Session specific compression layer
*/
#if defined(MBEDTLS_ZLIB_SUPPORT)
z_stream ctx_deflate; /*!< compression context */
z_stream ctx_inflate; /*!< decompression context */
#endif
};
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/*
* List of certificate + private key pairs
*/
struct mbedtls_ssl_key_cert
{
mbedtls_x509_crt *cert; /*!< cert */
mbedtls_pk_context *key; /*!< private key */
mbedtls_ssl_key_cert *next; /*!< next key/cert pair */
};
#endif /* MBEDTLS_X509_CRT_PARSE_C */
#if defined(MBEDTLS_SSL_PROTO_DTLS)
/*
* List of handshake messages kept around for resending
*/
struct mbedtls_ssl_flight_item
{
unsigned char *p; /*!< message, including handshake headers */
size_t len; /*!< length of p */
unsigned char type; /*!< type of the message: handshake or CCS */
mbedtls_ssl_flight_item *next; /*!< next handshake message(s) */
};
#endif /* MBEDTLS_SSL_PROTO_DTLS */
/**
* \brief Free referenced items in an SSL transform context and clear
* memory
*
* \param transform SSL transform context
*/
void mbedtls_ssl_transform_free( mbedtls_ssl_transform *transform );
/**
* \brief Free referenced items in an SSL handshake context and clear
* memory
*
* \param handshake SSL handshake context
*/
void mbedtls_ssl_handshake_free( mbedtls_ssl_handshake_params *handshake );
int mbedtls_ssl_handshake_client_step( mbedtls_ssl_context *ssl );
int mbedtls_ssl_handshake_server_step( mbedtls_ssl_context *ssl );
void mbedtls_ssl_handshake_wrapup( mbedtls_ssl_context *ssl );
int mbedtls_ssl_send_fatal_handshake_failure( mbedtls_ssl_context *ssl );
void mbedtls_ssl_reset_checksum( mbedtls_ssl_context *ssl );
int mbedtls_ssl_derive_keys( mbedtls_ssl_context *ssl );
int mbedtls_ssl_read_record( mbedtls_ssl_context *ssl );
int mbedtls_ssl_fetch_input( mbedtls_ssl_context *ssl, size_t nb_want );
int mbedtls_ssl_write_record( mbedtls_ssl_context *ssl );
int mbedtls_ssl_flush_output( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_certificate( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_certificate( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_change_cipher_spec( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_change_cipher_spec( mbedtls_ssl_context *ssl );
int mbedtls_ssl_parse_finished( mbedtls_ssl_context *ssl );
int mbedtls_ssl_write_finished( mbedtls_ssl_context *ssl );
void mbedtls_ssl_optimize_checksum( mbedtls_ssl_context *ssl,
const mbedtls_ssl_ciphersuite_t *ciphersuite_info );
#if defined(MBEDTLS_KEY_EXCHANGE__SOME__PSK_ENABLED)
int mbedtls_ssl_psk_derive_premaster( mbedtls_ssl_context *ssl, mbedtls_key_exchange_type_t key_ex );
#endif
#if defined(MBEDTLS_PK_C)
unsigned char mbedtls_ssl_sig_from_pk( mbedtls_pk_context *pk );
mbedtls_pk_type_t mbedtls_ssl_pk_alg_from_sig( unsigned char sig );
#endif
mbedtls_md_type_t mbedtls_ssl_md_alg_from_hash( unsigned char hash );
unsigned char mbedtls_ssl_hash_from_md_alg( int md );
#if defined(MBEDTLS_ECP_C)
int mbedtls_ssl_check_curve( const mbedtls_ssl_context *ssl, mbedtls_ecp_group_id grp_id );
#endif
#if defined(MBEDTLS_KEY_EXCHANGE__WITH_CERT__ENABLED)
int mbedtls_ssl_check_sig_hash( const mbedtls_ssl_context *ssl,
mbedtls_md_type_t md );
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
static inline mbedtls_pk_context *mbedtls_ssl_own_key( mbedtls_ssl_context *ssl )
{
mbedtls_ssl_key_cert *key_cert;
if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL )
key_cert = ssl->handshake->key_cert;
else
key_cert = ssl->conf->key_cert;
return( key_cert == NULL ? NULL : key_cert->key );
}
static inline mbedtls_x509_crt *mbedtls_ssl_own_cert( mbedtls_ssl_context *ssl )
{
mbedtls_ssl_key_cert *key_cert;
if( ssl->handshake != NULL && ssl->handshake->key_cert != NULL )
key_cert = ssl->handshake->key_cert;
else
key_cert = ssl->conf->key_cert;
return( key_cert == NULL ? NULL : key_cert->cert );
}
/*
* Check usage of a certificate wrt extensions:
* keyUsage, extendedKeyUsage (later), and nSCertType (later).
*
* Warning: cert_endpoint is the endpoint of the cert (ie, of our peer when we
* check a cert we received from them)!
*
* Return 0 if everything is OK, -1 if not.
*/
int mbedtls_ssl_check_cert_usage( const mbedtls_x509_crt *cert,
const mbedtls_ssl_ciphersuite_t *ciphersuite,
int cert_endpoint,
uint32_t *flags );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
void mbedtls_ssl_write_version( int major, int minor, int transport,
unsigned char ver[2] );
void mbedtls_ssl_read_version( int *major, int *minor, int transport,
const unsigned char ver[2] );
static inline size_t mbedtls_ssl_hdr_len( const mbedtls_ssl_context *ssl )
{
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( 13 );
#else
((void) ssl);
#endif
return( 5 );
}
static inline size_t mbedtls_ssl_hs_hdr_len( const mbedtls_ssl_context *ssl )
{
#if defined(MBEDTLS_SSL_PROTO_DTLS)
if( ssl->conf->transport == MBEDTLS_SSL_TRANSPORT_DATAGRAM )
return( 12 );
#else
((void) ssl);
#endif
return( 4 );
}
#if defined(MBEDTLS_SSL_PROTO_DTLS)
void mbedtls_ssl_send_flight_completed( mbedtls_ssl_context *ssl );
void mbedtls_ssl_recv_flight_completed( mbedtls_ssl_context *ssl );
int mbedtls_ssl_resend( mbedtls_ssl_context *ssl );
#endif
/* Visible for testing purposes only */
#if defined(MBEDTLS_SSL_DTLS_ANTI_REPLAY)
int mbedtls_ssl_dtls_replay_check( mbedtls_ssl_context *ssl );
void mbedtls_ssl_dtls_replay_update( mbedtls_ssl_context *ssl );
#endif
/* constant-time buffer comparison */
static inline int mbedtls_ssl_safer_memcmp( const void *a, const void *b, size_t n )
{
size_t i;
const unsigned char *A = (const unsigned char *) a;
const unsigned char *B = (const unsigned char *) b;
unsigned char diff = 0;
for( i = 0; i < n; i++ )
diff |= A[i] ^ B[i];
return( diff );
}
#ifdef __cplusplus
}
#endif
#endif /* ssl_internal.h */
/**
* \file ssl_ticket.h
*
* \brief TLS server ticket callbacks implementation
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_SSL_TICKET_H
#define MBEDTLS_SSL_TICKET_H
/*
* This implementation of the session ticket callbacks includes key
* management, rotating the keys periodically in order to preserve forward
* secrecy, when MBEDTLS_HAVE_TIME is defined.
*/
#include "ssl.h"
#include "cipher.h"
#if defined(MBEDTLS_THREADING_C)
#include "threading.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Information for session ticket protection
*/
typedef struct
{
unsigned char name[4]; /*!< random key identifier */
uint32_t generation_time; /*!< key generation timestamp (seconds) */
mbedtls_cipher_context_t ctx; /*!< context for auth enc/decryption */
}
mbedtls_ssl_ticket_key;
/**
* \brief Context for session ticket handling functions
*/
typedef struct
{
mbedtls_ssl_ticket_key keys[2]; /*!< ticket protection keys */
unsigned char active; /*!< index of the currently active key */
uint32_t ticket_lifetime; /*!< lifetime of tickets in seconds */
/** Callback for getting (pseudo-)random numbers */
int (*f_rng)(void *, unsigned char *, size_t);
void *p_rng; /*!< context for the RNG function */
#if defined(MBEDTLS_THREADING_C)
mbedtls_threading_mutex_t mutex;
#endif
}
mbedtls_ssl_ticket_context;
/**
* \brief Initialize a ticket context.
* (Just make it ready for mbedtls_ssl_ticket_setup()
* or mbedtls_ssl_ticket_free().)
*
* \param ctx Context to be initialized
*/
void mbedtls_ssl_ticket_init( mbedtls_ssl_ticket_context *ctx );
/**
* \brief Prepare context to be actually used
*
* \param ctx Context to be set up
* \param f_rng RNG callback function
* \param p_rng RNG callback context
* \param cipher AEAD cipher to use for ticket protection.
* Recommended value: MBEDTLS_CIPHER_AES_256_GCM.
* \param lifetime Tickets lifetime in seconds
* Recommended value: 86400 (one day).
*
* \note It is highly recommended to select a cipher that is at
* least as strong as the the strongest ciphersuite
* supported. Usually that means a 256-bit key.
*
* \note The lifetime of the keys is twice the lifetime of tickets.
* It is recommended to pick a reasonnable lifetime so as not
* to negate the benefits of forward secrecy.
*
* \return 0 if successful,
* or a specific MBEDTLS_ERR_XXX error code
*/
int mbedtls_ssl_ticket_setup( mbedtls_ssl_ticket_context *ctx,
int (*f_rng)(void *, unsigned char *, size_t), void *p_rng,
mbedtls_cipher_type_t cipher,
uint32_t lifetime );
/**
* \brief Implementation of the ticket write callback
*
* \note See \c mbedlts_ssl_ticket_write_t for description
*/
mbedtls_ssl_ticket_write_t mbedtls_ssl_ticket_write;
/**
* \brief Implementation of the ticket parse callback
*
* \note See \c mbedlts_ssl_ticket_parse_t for description
*/
mbedtls_ssl_ticket_parse_t mbedtls_ssl_ticket_parse;
/**
* \brief Free a context's content and zeroize it.
*
* \param ctx Context to be cleaned up
*/
void mbedtls_ssl_ticket_free( mbedtls_ssl_ticket_context *ctx );
#ifdef __cplusplus
}
#endif
#endif /* ssl_ticket.h */
/**
* \file threading.h
*
* \brief Threading abstraction layer
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_THREADING_H
#define MBEDTLS_THREADING_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stdlib.h>
#ifdef __cplusplus
extern "C" {
#endif
#define MBEDTLS_ERR_THREADING_FEATURE_UNAVAILABLE -0x001A /**< The selected feature is not available. */
#define MBEDTLS_ERR_THREADING_BAD_INPUT_DATA -0x001C /**< Bad input parameters to function. */
#define MBEDTLS_ERR_THREADING_MUTEX_ERROR -0x001E /**< Locking / unlocking / free failed with error code. */
#if defined(MBEDTLS_THREADING_PTHREAD)
#include <pthread.h>
typedef struct
{
pthread_mutex_t mutex;
char is_valid;
} mbedtls_threading_mutex_t;
#endif
#if defined(MBEDTLS_THREADING_ALT)
/* You should define the mbedtls_threading_mutex_t type in your header */
#include "threading_alt.h"
/**
* \brief Set your alternate threading implementation function
* pointers and initialize global mutexes. If used, this
* function must be called once in the main thread before any
* other mbed TLS function is called, and
* mbedtls_threading_free_alt() must be called once in the main
* thread after all other mbed TLS functions.
*
* \note mutex_init() and mutex_free() don't return a status code.
* If mutex_init() fails, it should leave its argument (the
* mutex) in a state such that mutex_lock() will fail when
* called with this argument.
*
* \param mutex_init the init function implementation
* \param mutex_free the free function implementation
* \param mutex_lock the lock function implementation
* \param mutex_unlock the unlock function implementation
*/
void mbedtls_threading_set_alt( void (*mutex_init)( mbedtls_threading_mutex_t * ),
void (*mutex_free)( mbedtls_threading_mutex_t * ),
int (*mutex_lock)( mbedtls_threading_mutex_t * ),
int (*mutex_unlock)( mbedtls_threading_mutex_t * ) );
/**
* \brief Free global mutexes.
*/
void mbedtls_threading_free_alt( void );
#endif /* MBEDTLS_THREADING_ALT */
/*
* The function pointers for mutex_init, mutex_free, mutex_ and mutex_unlock
*
* All these functions are expected to work or the result will be undefined.
*/
extern void (*mbedtls_mutex_init)( mbedtls_threading_mutex_t *mutex );
extern void (*mbedtls_mutex_free)( mbedtls_threading_mutex_t *mutex );
extern int (*mbedtls_mutex_lock)( mbedtls_threading_mutex_t *mutex );
extern int (*mbedtls_mutex_unlock)( mbedtls_threading_mutex_t *mutex );
/*
* Global mutexes
*/
extern mbedtls_threading_mutex_t mbedtls_threading_readdir_mutex;
extern mbedtls_threading_mutex_t mbedtls_threading_gmtime_mutex;
#ifdef __cplusplus
}
#endif
#endif /* threading.h */
/**
* \file timing.h
*
* \brief Portable interface to the CPU cycle counter
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_TIMING_H
#define MBEDTLS_TIMING_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#if !defined(MBEDTLS_TIMING_ALT)
// Regular implementation
//
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief timer structure
*/
struct mbedtls_timing_hr_time
{
unsigned char opaque[32];
};
/**
* \brief Context for mbedtls_timing_set/get_delay()
*/
typedef struct
{
struct mbedtls_timing_hr_time timer;
uint32_t int_ms;
uint32_t fin_ms;
} mbedtls_timing_delay_context;
extern volatile int mbedtls_timing_alarmed;
/**
* \brief Return the CPU cycle counter value
*
* \warning This is only a best effort! Do not rely on this!
* In particular, it is known to be unreliable on virtual
* machines.
*/
unsigned long mbedtls_timing_hardclock( void );
/**
* \brief Return the elapsed time in milliseconds
*
* \param val points to a timer structure
* \param reset if set to 1, the timer is restarted
*/
unsigned long mbedtls_timing_get_timer( struct mbedtls_timing_hr_time *val, int reset );
/**
* \brief Setup an alarm clock
*
* \param seconds delay before the "mbedtls_timing_alarmed" flag is set
*
* \warning Only one alarm at a time is supported. In a threaded
* context, this means one for the whole process, not one per
* thread.
*/
void mbedtls_set_alarm( int seconds );
/**
* \brief Set a pair of delays to watch
* (See \c mbedtls_timing_get_delay().)
*
* \param data Pointer to timing data
* Must point to a valid \c mbedtls_timing_delay_context struct.
* \param int_ms First (intermediate) delay in milliseconds.
* \param fin_ms Second (final) delay in milliseconds.
* Pass 0 to cancel the current delay.
*/
void mbedtls_timing_set_delay( void *data, uint32_t int_ms, uint32_t fin_ms );
/**
* \brief Get the status of delays
* (Memory helper: number of delays passed.)
*
* \param data Pointer to timing data
* Must point to a valid \c mbedtls_timing_delay_context struct.
*
* \return -1 if cancelled (fin_ms = 0)
* 0 if none of the delays are passed,
* 1 if only the intermediate delay is passed,
* 2 if the final delay is passed.
*/
int mbedtls_timing_get_delay( void *data );
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_TIMING_ALT */
#include "timing_alt.h"
#endif /* MBEDTLS_TIMING_ALT */
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if a test failed
*/
int mbedtls_timing_self_test( int verbose );
#endif
#ifdef __cplusplus
}
#endif
#endif /* timing.h */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment