Commit b96e3147 authored by Marcel Stör's avatar Marcel Stör Committed by GitHub
Browse files

Merge pull request #1774 from nodemcu/dev

2.0.0 master drop
parents 81ec3665 20a591f5
/**
* \file version.h
*
* \brief Run-time version information
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
/*
* This set of compile-time defines and run-time variables can be used to
* determine the version number of the mbed TLS library used.
*/
#ifndef MBEDTLS_VERSION_H
#define MBEDTLS_VERSION_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
/**
* The version number x.y.z is split into three parts.
* Major, Minor, Patchlevel
*/
#define MBEDTLS_VERSION_MAJOR 2
#define MBEDTLS_VERSION_MINOR 2
#define MBEDTLS_VERSION_PATCH 1
/**
* The single version number has the following structure:
* MMNNPP00
* Major version | Minor version | Patch version
*/
#define MBEDTLS_VERSION_NUMBER 0x02020100
#define MBEDTLS_VERSION_STRING "2.2.1"
#define MBEDTLS_VERSION_STRING_FULL "mbed TLS 2.2.1"
#if defined(MBEDTLS_VERSION_C)
#ifdef __cplusplus
extern "C" {
#endif
/**
* Get the version number.
*
* \return The constructed version number in the format
* MMNNPP00 (Major, Minor, Patch).
*/
unsigned int mbedtls_version_get_number( void );
/**
* Get the version string ("x.y.z").
*
* \param string The string that will receive the value.
* (Should be at least 9 bytes in size)
*/
void mbedtls_version_get_string( char *string );
/**
* Get the full version string ("mbed TLS x.y.z").
*
* \param string The string that will receive the value. The mbed TLS version
* string will use 18 bytes AT MOST including a terminating
* null byte.
* (So the buffer should be at least 18 bytes to receive this
* version string).
*/
void mbedtls_version_get_string_full( char *string );
/**
* \brief Check if support for a feature was compiled into this
* mbed TLS binary. This allows you to see at runtime if the
* library was for instance compiled with or without
* Multi-threading support.
*
* \note only checks against defines in the sections "System
* support", "mbed TLS modules" and "mbed TLS feature
* support" in config.h
*
* \param feature The string for the define to check (e.g. "MBEDTLS_AES_C")
*
* \return 0 if the feature is present,
* -1 if the feature is not present and
* -2 if support for feature checking as a whole was not
* compiled in.
*/
int mbedtls_version_check_feature( const char *feature );
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_VERSION_C */
#endif /* version.h */
/**
* \file x509.h
*
* \brief X.509 generic defines and structures
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_X509_H
#define MBEDTLS_X509_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "asn1.h"
#include "pk.h"
#if defined(MBEDTLS_RSA_C)
#include "rsa.h"
#endif
/**
* \addtogroup x509_module
* \{
*/
#if !defined(MBEDTLS_X509_MAX_INTERMEDIATE_CA)
/**
* Maximum number of intermediate CAs in a verification chain.
* That is, maximum length of the chain, excluding the end-entity certificate
* and the trusted root certificate.
*
* Set this to a low value to prevent an adversary from making you waste
* resources verifying an overlong certificate chain.
*/
#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8
#endif
/**
* \name X509 Error codes
* \{
*/
#define MBEDTLS_ERR_X509_FEATURE_UNAVAILABLE -0x2080 /**< Unavailable feature, e.g. RSA hashing/encryption combination. */
#define MBEDTLS_ERR_X509_UNKNOWN_OID -0x2100 /**< Requested OID is unknown. */
#define MBEDTLS_ERR_X509_INVALID_FORMAT -0x2180 /**< The CRT/CRL/CSR format is invalid, e.g. different type expected. */
#define MBEDTLS_ERR_X509_INVALID_VERSION -0x2200 /**< The CRT/CRL/CSR version element is invalid. */
#define MBEDTLS_ERR_X509_INVALID_SERIAL -0x2280 /**< The serial tag or value is invalid. */
#define MBEDTLS_ERR_X509_INVALID_ALG -0x2300 /**< The algorithm tag or value is invalid. */
#define MBEDTLS_ERR_X509_INVALID_NAME -0x2380 /**< The name tag or value is invalid. */
#define MBEDTLS_ERR_X509_INVALID_DATE -0x2400 /**< The date tag or value is invalid. */
#define MBEDTLS_ERR_X509_INVALID_SIGNATURE -0x2480 /**< The signature tag or value invalid. */
#define MBEDTLS_ERR_X509_INVALID_EXTENSIONS -0x2500 /**< The extension tag or value is invalid. */
#define MBEDTLS_ERR_X509_UNKNOWN_VERSION -0x2580 /**< CRT/CRL/CSR has an unsupported version number. */
#define MBEDTLS_ERR_X509_UNKNOWN_SIG_ALG -0x2600 /**< Signature algorithm (oid) is unsupported. */
#define MBEDTLS_ERR_X509_SIG_MISMATCH -0x2680 /**< Signature algorithms do not match. (see \c ::mbedtls_x509_crt sig_oid) */
#define MBEDTLS_ERR_X509_CERT_VERIFY_FAILED -0x2700 /**< Certificate verification failed, e.g. CRL, CA or signature check failed. */
#define MBEDTLS_ERR_X509_CERT_UNKNOWN_FORMAT -0x2780 /**< Format not recognized as DER or PEM. */
#define MBEDTLS_ERR_X509_BAD_INPUT_DATA -0x2800 /**< Input invalid. */
#define MBEDTLS_ERR_X509_ALLOC_FAILED -0x2880 /**< Allocation of memory failed. */
#define MBEDTLS_ERR_X509_FILE_IO_ERROR -0x2900 /**< Read/write of file failed. */
#define MBEDTLS_ERR_X509_BUFFER_TOO_SMALL -0x2980 /**< Destination buffer is too small. */
/* \} name */
/**
* \name X509 Verify codes
* \{
*/
/* Reminder: update x509_crt_verify_strings[] in library/x509_crt.c */
#define MBEDTLS_X509_BADCERT_EXPIRED 0x01 /**< The certificate validity has expired. */
#define MBEDTLS_X509_BADCERT_REVOKED 0x02 /**< The certificate has been revoked (is on a CRL). */
#define MBEDTLS_X509_BADCERT_CN_MISMATCH 0x04 /**< The certificate Common Name (CN) does not match with the expected CN. */
#define MBEDTLS_X509_BADCERT_NOT_TRUSTED 0x08 /**< The certificate is not correctly signed by the trusted CA. */
#define MBEDTLS_X509_BADCRL_NOT_TRUSTED 0x10 /**< The CRL is not correctly signed by the trusted CA. */
#define MBEDTLS_X509_BADCRL_EXPIRED 0x20 /**< The CRL is expired. */
#define MBEDTLS_X509_BADCERT_MISSING 0x40 /**< Certificate was missing. */
#define MBEDTLS_X509_BADCERT_SKIP_VERIFY 0x80 /**< Certificate verification was skipped. */
#define MBEDTLS_X509_BADCERT_OTHER 0x0100 /**< Other reason (can be used by verify callback) */
#define MBEDTLS_X509_BADCERT_FUTURE 0x0200 /**< The certificate validity starts in the future. */
#define MBEDTLS_X509_BADCRL_FUTURE 0x0400 /**< The CRL is from the future */
#define MBEDTLS_X509_BADCERT_KEY_USAGE 0x0800 /**< Usage does not match the keyUsage extension. */
#define MBEDTLS_X509_BADCERT_EXT_KEY_USAGE 0x1000 /**< Usage does not match the extendedKeyUsage extension. */
#define MBEDTLS_X509_BADCERT_NS_CERT_TYPE 0x2000 /**< Usage does not match the nsCertType extension. */
#define MBEDTLS_X509_BADCERT_BAD_MD 0x4000 /**< The certificate is signed with an unacceptable hash. */
#define MBEDTLS_X509_BADCERT_BAD_PK 0x8000 /**< The certificate is signed with an unacceptable PK alg (eg RSA vs ECDSA). */
#define MBEDTLS_X509_BADCERT_BAD_KEY 0x010000 /**< The certificate is signed with an unacceptable key (eg bad curve, RSA too short). */
#define MBEDTLS_X509_BADCRL_BAD_MD 0x020000 /**< The CRL is signed with an unacceptable hash. */
#define MBEDTLS_X509_BADCRL_BAD_PK 0x040000 /**< The CRL is signed with an unacceptable PK alg (eg RSA vs ECDSA). */
#define MBEDTLS_X509_BADCRL_BAD_KEY 0x080000 /**< The CRL is signed with an unacceptable key (eg bad curve, RSA too short). */
/* \} name */
/* \} addtogroup x509_module */
/*
* X.509 v3 Key Usage Extension flags
* Reminder: update x509_info_key_usage() when adding new flags.
*/
#define MBEDTLS_X509_KU_DIGITAL_SIGNATURE (0x80) /* bit 0 */
#define MBEDTLS_X509_KU_NON_REPUDIATION (0x40) /* bit 1 */
#define MBEDTLS_X509_KU_KEY_ENCIPHERMENT (0x20) /* bit 2 */
#define MBEDTLS_X509_KU_DATA_ENCIPHERMENT (0x10) /* bit 3 */
#define MBEDTLS_X509_KU_KEY_AGREEMENT (0x08) /* bit 4 */
#define MBEDTLS_X509_KU_KEY_CERT_SIGN (0x04) /* bit 5 */
#define MBEDTLS_X509_KU_CRL_SIGN (0x02) /* bit 6 */
#define MBEDTLS_X509_KU_ENCIPHER_ONLY (0x01) /* bit 7 */
#define MBEDTLS_X509_KU_DECIPHER_ONLY (0x8000) /* bit 8 */
/*
* Netscape certificate types
* (http://www.mozilla.org/projects/security/pki/nss/tech-notes/tn3.html)
*/
#define MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT (0x80) /* bit 0 */
#define MBEDTLS_X509_NS_CERT_TYPE_SSL_SERVER (0x40) /* bit 1 */
#define MBEDTLS_X509_NS_CERT_TYPE_EMAIL (0x20) /* bit 2 */
#define MBEDTLS_X509_NS_CERT_TYPE_OBJECT_SIGNING (0x10) /* bit 3 */
#define MBEDTLS_X509_NS_CERT_TYPE_RESERVED (0x08) /* bit 4 */
#define MBEDTLS_X509_NS_CERT_TYPE_SSL_CA (0x04) /* bit 5 */
#define MBEDTLS_X509_NS_CERT_TYPE_EMAIL_CA (0x02) /* bit 6 */
#define MBEDTLS_X509_NS_CERT_TYPE_OBJECT_SIGNING_CA (0x01) /* bit 7 */
/*
* X.509 extension types
*
* Comments refer to the status for using certificates. Status can be
* different for writing certificates or reading CRLs or CSRs.
*/
#define MBEDTLS_X509_EXT_AUTHORITY_KEY_IDENTIFIER (1 << 0)
#define MBEDTLS_X509_EXT_SUBJECT_KEY_IDENTIFIER (1 << 1)
#define MBEDTLS_X509_EXT_KEY_USAGE (1 << 2)
#define MBEDTLS_X509_EXT_CERTIFICATE_POLICIES (1 << 3)
#define MBEDTLS_X509_EXT_POLICY_MAPPINGS (1 << 4)
#define MBEDTLS_X509_EXT_SUBJECT_ALT_NAME (1 << 5) /* Supported (DNS) */
#define MBEDTLS_X509_EXT_ISSUER_ALT_NAME (1 << 6)
#define MBEDTLS_X509_EXT_SUBJECT_DIRECTORY_ATTRS (1 << 7)
#define MBEDTLS_X509_EXT_BASIC_CONSTRAINTS (1 << 8) /* Supported */
#define MBEDTLS_X509_EXT_NAME_CONSTRAINTS (1 << 9)
#define MBEDTLS_X509_EXT_POLICY_CONSTRAINTS (1 << 10)
#define MBEDTLS_X509_EXT_EXTENDED_KEY_USAGE (1 << 11)
#define MBEDTLS_X509_EXT_CRL_DISTRIBUTION_POINTS (1 << 12)
#define MBEDTLS_X509_EXT_INIHIBIT_ANYPOLICY (1 << 13)
#define MBEDTLS_X509_EXT_FRESHEST_CRL (1 << 14)
#define MBEDTLS_X509_EXT_NS_CERT_TYPE (1 << 16) /* Parsed (and then ?) */
/*
* Storage format identifiers
* Recognized formats: PEM and DER
*/
#define MBEDTLS_X509_FORMAT_DER 1
#define MBEDTLS_X509_FORMAT_PEM 2
#define MBEDTLS_X509_MAX_DN_NAME_SIZE 256 /**< Maximum value size of a DN entry */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \addtogroup x509_module
* \{ */
/**
* \name Structures for parsing X.509 certificates, CRLs and CSRs
* \{
*/
/**
* Type-length-value structure that allows for ASN1 using DER.
*/
typedef mbedtls_asn1_buf mbedtls_x509_buf;
/**
* Container for ASN1 bit strings.
*/
typedef mbedtls_asn1_bitstring mbedtls_x509_bitstring;
/**
* Container for ASN1 named information objects.
* It allows for Relative Distinguished Names (e.g. cn=localhost,ou=code,etc.).
*/
typedef mbedtls_asn1_named_data mbedtls_x509_name;
/**
* Container for a sequence of ASN.1 items
*/
typedef mbedtls_asn1_sequence mbedtls_x509_sequence;
/** Container for date and time (precision in seconds). */
typedef struct mbedtls_x509_time
{
int year, mon, day; /**< Date. */
int hour, min, sec; /**< Time. */
}
mbedtls_x509_time;
/** \} name Structures for parsing X.509 certificates, CRLs and CSRs */
/** \} addtogroup x509_module */
/**
* \brief Store the certificate DN in printable form into buf;
* no more than size characters will be written.
*
* \param buf Buffer to write to
* \param size Maximum size of buffer
* \param dn The X509 name to represent
*
* \return The length of the string written (not including the
* terminated nul byte), or a negative error code.
*/
int mbedtls_x509_dn_gets( char *buf, size_t size, const mbedtls_x509_name *dn );
/**
* \brief Store the certificate serial in printable form into buf;
* no more than size characters will be written.
*
* \param buf Buffer to write to
* \param size Maximum size of buffer
* \param serial The X509 serial to represent
*
* \return The length of the string written (not including the
* terminated nul byte), or a negative error code.
*/
int mbedtls_x509_serial_gets( char *buf, size_t size, const mbedtls_x509_buf *serial );
/**
* \brief Check a given mbedtls_x509_time against the system time
* and tell if it's in the past.
*
* \note Intended usage is "if( is_past( valid_to ) ) ERROR".
* Hence the return value of 1 if on internal errors.
*
* \param time mbedtls_x509_time to check
*
* \return 1 if the given time is in the past or an error occured,
* 0 otherwise.
*/
int mbedtls_x509_time_is_past( const mbedtls_x509_time *time );
/**
* \brief Check a given mbedtls_x509_time against the system time
* and tell if it's in the future.
*
* \note Intended usage is "if( is_future( valid_from ) ) ERROR".
* Hence the return value of 1 if on internal errors.
*
* \param time mbedtls_x509_time to check
*
* \return 1 if the given time is in the future or an error occured,
* 0 otherwise.
*/
int mbedtls_x509_time_is_future( const mbedtls_x509_time *time );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_x509_self_test( int verbose );
/*
* Internal module functions. You probably do not want to use these unless you
* know you do.
*/
int mbedtls_x509_get_name( unsigned char **p, const unsigned char *end,
mbedtls_x509_name *cur );
int mbedtls_x509_get_alg_null( unsigned char **p, const unsigned char *end,
mbedtls_x509_buf *alg );
int mbedtls_x509_get_alg( unsigned char **p, const unsigned char *end,
mbedtls_x509_buf *alg, mbedtls_x509_buf *params );
#if defined(MBEDTLS_X509_RSASSA_PSS_SUPPORT)
int mbedtls_x509_get_rsassa_pss_params( const mbedtls_x509_buf *params,
mbedtls_md_type_t *md_alg, mbedtls_md_type_t *mgf_md,
int *salt_len );
#endif
int mbedtls_x509_get_sig( unsigned char **p, const unsigned char *end, mbedtls_x509_buf *sig );
int mbedtls_x509_get_sig_alg( const mbedtls_x509_buf *sig_oid, const mbedtls_x509_buf *sig_params,
mbedtls_md_type_t *md_alg, mbedtls_pk_type_t *pk_alg,
void **sig_opts );
int mbedtls_x509_get_time( unsigned char **p, const unsigned char *end,
mbedtls_x509_time *time );
int mbedtls_x509_get_serial( unsigned char **p, const unsigned char *end,
mbedtls_x509_buf *serial );
int mbedtls_x509_get_ext( unsigned char **p, const unsigned char *end,
mbedtls_x509_buf *ext, int tag );
int mbedtls_x509_sig_alg_gets( char *buf, size_t size, const mbedtls_x509_buf *sig_oid,
mbedtls_pk_type_t pk_alg, mbedtls_md_type_t md_alg,
const void *sig_opts );
int mbedtls_x509_key_size_helper( char *buf, size_t buf_size, const char *name );
int mbedtls_x509_string_to_names( mbedtls_asn1_named_data **head, const char *name );
int mbedtls_x509_set_extension( mbedtls_asn1_named_data **head, const char *oid, size_t oid_len,
int critical, const unsigned char *val,
size_t val_len );
int mbedtls_x509_write_extensions( unsigned char **p, unsigned char *start,
mbedtls_asn1_named_data *first );
int mbedtls_x509_write_names( unsigned char **p, unsigned char *start,
mbedtls_asn1_named_data *first );
int mbedtls_x509_write_sig( unsigned char **p, unsigned char *start,
const char *oid, size_t oid_len,
unsigned char *sig, size_t size );
#define MBEDTLS_X509_SAFE_SNPRINTF \
do { \
if( ret < 0 || (size_t) ret >= n ) \
return( MBEDTLS_ERR_X509_BUFFER_TOO_SMALL ); \
\
n -= (size_t) ret; \
p += (size_t) ret; \
} while( 0 )
#ifdef __cplusplus
}
#endif
#endif /* x509.h */
/**
* \file x509_crl.h
*
* \brief X.509 certificate revocation list parsing
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_X509_CRL_H
#define MBEDTLS_X509_CRL_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "x509.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* \addtogroup x509_module
* \{ */
/**
* \name Structures and functions for parsing CRLs
* \{
*/
/**
* Certificate revocation list entry.
* Contains the CA-specific serial numbers and revocation dates.
*/
typedef struct mbedtls_x509_crl_entry
{
mbedtls_x509_buf raw;
mbedtls_x509_buf serial;
mbedtls_x509_time revocation_date;
mbedtls_x509_buf entry_ext;
struct mbedtls_x509_crl_entry *next;
}
mbedtls_x509_crl_entry;
/**
* Certificate revocation list structure.
* Every CRL may have multiple entries.
*/
typedef struct mbedtls_x509_crl
{
mbedtls_x509_buf raw; /**< The raw certificate data (DER). */
mbedtls_x509_buf tbs; /**< The raw certificate body (DER). The part that is To Be Signed. */
int version; /**< CRL version (1=v1, 2=v2) */
mbedtls_x509_buf sig_oid; /**< CRL signature type identifier */
mbedtls_x509_buf issuer_raw; /**< The raw issuer data (DER). */
mbedtls_x509_name issuer; /**< The parsed issuer data (named information object). */
mbedtls_x509_time this_update;
mbedtls_x509_time next_update;
mbedtls_x509_crl_entry entry; /**< The CRL entries containing the certificate revocation times for this CA. */
mbedtls_x509_buf crl_ext;
mbedtls_x509_buf sig_oid2;
mbedtls_x509_buf sig;
mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */
mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */
void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */
struct mbedtls_x509_crl *next;
}
mbedtls_x509_crl;
/**
* \brief Parse a DER-encoded CRL and append it to the chained list
*
* \param chain points to the start of the chain
* \param buf buffer holding the CRL data in DER format
* \param buflen size of the buffer
* (including the terminating null byte for PEM data)
*
* \return 0 if successful, or a specific X509 or PEM error code
*/
int mbedtls_x509_crl_parse_der( mbedtls_x509_crl *chain,
const unsigned char *buf, size_t buflen );
/**
* \brief Parse one or more CRLs and append them to the chained list
*
* \note Mutliple CRLs are accepted only if using PEM format
*
* \param chain points to the start of the chain
* \param buf buffer holding the CRL data in PEM or DER format
* \param buflen size of the buffer
* (including the terminating null byte for PEM data)
*
* \return 0 if successful, or a specific X509 or PEM error code
*/
int mbedtls_x509_crl_parse( mbedtls_x509_crl *chain, const unsigned char *buf, size_t buflen );
#if defined(MBEDTLS_FS_IO)
/**
* \brief Load one or more CRLs and append them to the chained list
*
* \note Mutliple CRLs are accepted only if using PEM format
*
* \param chain points to the start of the chain
* \param path filename to read the CRLs from (in PEM or DER encoding)
*
* \return 0 if successful, or a specific X509 or PEM error code
*/
int mbedtls_x509_crl_parse_file( mbedtls_x509_crl *chain, const char *path );
#endif /* MBEDTLS_FS_IO */
/**
* \brief Returns an informational string about the CRL.
*
* \param buf Buffer to write to
* \param size Maximum size of buffer
* \param prefix A line prefix
* \param crl The X509 CRL to represent
*
* \return The length of the string written (not including the
* terminated nul byte), or a negative error code.
*/
int mbedtls_x509_crl_info( char *buf, size_t size, const char *prefix,
const mbedtls_x509_crl *crl );
/**
* \brief Initialize a CRL (chain)
*
* \param crl CRL chain to initialize
*/
void mbedtls_x509_crl_init( mbedtls_x509_crl *crl );
/**
* \brief Unallocate all CRL data
*
* \param crl CRL chain to free
*/
void mbedtls_x509_crl_free( mbedtls_x509_crl *crl );
/* \} name */
/* \} addtogroup x509_module */
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_x509_crl.h */
/**
* \file x509_crt.h
*
* \brief X.509 certificate parsing and writing
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_X509_CRT_H
#define MBEDTLS_X509_CRT_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "x509.h"
#include "x509_crl.h"
/**
* \addtogroup x509_module
* \{
*/
#ifdef __cplusplus
extern "C" {
#endif
/**
* \name Structures and functions for parsing and writing X.509 certificates
* \{
*/
/**
* Container for an X.509 certificate. The certificate may be chained.
*/
typedef struct mbedtls_x509_crt
{
mbedtls_x509_buf raw; /**< The raw certificate data (DER). */
mbedtls_x509_buf tbs; /**< The raw certificate body (DER). The part that is To Be Signed. */
int version; /**< The X.509 version. (1=v1, 2=v2, 3=v3) */
mbedtls_x509_buf serial; /**< Unique id for certificate issued by a specific CA. */
mbedtls_x509_buf sig_oid; /**< Signature algorithm, e.g. sha1RSA */
mbedtls_x509_buf issuer_raw; /**< The raw issuer data (DER). Used for quick comparison. */
mbedtls_x509_buf subject_raw; /**< The raw subject data (DER). Used for quick comparison. */
mbedtls_x509_name issuer; /**< The parsed issuer data (named information object). */
mbedtls_x509_name subject; /**< The parsed subject data (named information object). */
mbedtls_x509_time valid_from; /**< Start time of certificate validity. */
mbedtls_x509_time valid_to; /**< End time of certificate validity. */
mbedtls_pk_context pk; /**< Container for the public key context. */
mbedtls_x509_buf issuer_id; /**< Optional X.509 v2/v3 issuer unique identifier. */
mbedtls_x509_buf subject_id; /**< Optional X.509 v2/v3 subject unique identifier. */
mbedtls_x509_buf v3_ext; /**< Optional X.509 v3 extensions. */
mbedtls_x509_sequence subject_alt_names; /**< Optional list of Subject Alternative Names (Only dNSName supported). */
int ext_types; /**< Bit string containing detected and parsed extensions */
int ca_istrue; /**< Optional Basic Constraint extension value: 1 if this certificate belongs to a CA, 0 otherwise. */
int max_pathlen; /**< Optional Basic Constraint extension value: The maximum path length to the root certificate. Path length is 1 higher than RFC 5280 'meaning', so 1+ */
unsigned int key_usage; /**< Optional key usage extension value: See the values in x509.h */
mbedtls_x509_sequence ext_key_usage; /**< Optional list of extended key usage OIDs. */
unsigned char ns_cert_type; /**< Optional Netscape certificate type extension value: See the values in x509.h */
mbedtls_x509_buf sig; /**< Signature: hash of the tbs part signed with the private key. */
mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */
mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */
void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */
struct mbedtls_x509_crt *next; /**< Next certificate in the CA-chain. */
}
mbedtls_x509_crt;
/**
* Build flag from an algorithm/curve identifier (pk, md, ecp)
* Since 0 is always XXX_NONE, ignore it.
*/
#define MBEDTLS_X509_ID_FLAG( id ) ( 1 << ( id - 1 ) )
/**
* Security profile for certificate verification.
*
* All lists are bitfields, built by ORing flags from MBEDTLS_X509_ID_FLAG().
*/
typedef struct
{
uint32_t allowed_mds; /**< MDs for signatures */
uint32_t allowed_pks; /**< PK algs for signatures */
uint32_t allowed_curves; /**< Elliptic curves for ECDSA */
uint32_t rsa_min_bitlen; /**< Minimum size for RSA keys */
}
mbedtls_x509_crt_profile;
#define MBEDTLS_X509_CRT_VERSION_1 0
#define MBEDTLS_X509_CRT_VERSION_2 1
#define MBEDTLS_X509_CRT_VERSION_3 2
#define MBEDTLS_X509_RFC5280_MAX_SERIAL_LEN 32
#define MBEDTLS_X509_RFC5280_UTC_TIME_LEN 15
/**
* Container for writing a certificate (CRT)
*/
typedef struct mbedtls_x509write_cert
{
int version;
mbedtls_mpi serial;
mbedtls_pk_context *subject_key;
mbedtls_pk_context *issuer_key;
mbedtls_asn1_named_data *subject;
mbedtls_asn1_named_data *issuer;
mbedtls_md_type_t md_alg;
char not_before[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1];
char not_after[MBEDTLS_X509_RFC5280_UTC_TIME_LEN + 1];
mbedtls_asn1_named_data *extensions;
}
mbedtls_x509write_cert;
#if defined(MBEDTLS_X509_CRT_PARSE_C)
/**
* Default security profile. Should provide a good balance between security
* and compatibility with current deployments.
*/
extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_default;
/**
* Expected next default profile. Recommended for new deployments.
* Currently targets a 128-bit security level, except for RSA-2048.
*/
extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_next;
/**
* NSA Suite B profile.
*/
extern const mbedtls_x509_crt_profile mbedtls_x509_crt_profile_suiteb;
/**
* \brief Parse a single DER formatted certificate and add it
* to the chained list.
*
* \param chain points to the start of the chain
* \param buf buffer holding the certificate DER data
* \param buflen size of the buffer
*
* \return 0 if successful, or a specific X509 or PEM error code
*/
int mbedtls_x509_crt_parse_der( mbedtls_x509_crt *chain, const unsigned char *buf,
size_t buflen );
/**
* \brief Parse one or more certificates and add them
* to the chained list. Parses permissively. If some
* certificates can be parsed, the result is the number
* of failed certificates it encountered. If none complete
* correctly, the first error is returned.
*
* \param chain points to the start of the chain
* \param buf buffer holding the certificate data in PEM or DER format
* \param buflen size of the buffer
* (including the terminating null byte for PEM data)
*
* \return 0 if all certificates parsed successfully, a positive number
* if partly successful or a specific X509 or PEM error code
*/
int mbedtls_x509_crt_parse( mbedtls_x509_crt *chain, const unsigned char *buf, size_t buflen );
#if defined(MBEDTLS_FS_IO)
/**
* \brief Load one or more certificates and add them
* to the chained list. Parses permissively. If some
* certificates can be parsed, the result is the number
* of failed certificates it encountered. If none complete
* correctly, the first error is returned.
*
* \param chain points to the start of the chain
* \param path filename to read the certificates from
*
* \return 0 if all certificates parsed successfully, a positive number
* if partly successful or a specific X509 or PEM error code
*/
int mbedtls_x509_crt_parse_file( mbedtls_x509_crt *chain, const char *path );
/**
* \brief Load one or more certificate files from a path and add them
* to the chained list. Parses permissively. If some
* certificates can be parsed, the result is the number
* of failed certificates it encountered. If none complete
* correctly, the first error is returned.
*
* \param chain points to the start of the chain
* \param path directory / folder to read the certificate files from
*
* \return 0 if all certificates parsed successfully, a positive number
* if partly successful or a specific X509 or PEM error code
*/
int mbedtls_x509_crt_parse_path( mbedtls_x509_crt *chain, const char *path );
#endif /* MBEDTLS_FS_IO */
/**
* \brief Returns an informational string about the
* certificate.
*
* \param buf Buffer to write to
* \param size Maximum size of buffer
* \param prefix A line prefix
* \param crt The X509 certificate to represent
*
* \return The length of the string written (not including the
* terminated nul byte), or a negative error code.
*/
int mbedtls_x509_crt_info( char *buf, size_t size, const char *prefix,
const mbedtls_x509_crt *crt );
/**
* \brief Returns an informational string about the
* verification status of a certificate.
*
* \param buf Buffer to write to
* \param size Maximum size of buffer
* \param prefix A line prefix
* \param flags Verification flags created by mbedtls_x509_crt_verify()
*
* \return The length of the string written (not including the
* terminated nul byte), or a negative error code.
*/
int mbedtls_x509_crt_verify_info( char *buf, size_t size, const char *prefix,
uint32_t flags );
/**
* \brief Verify the certificate signature
*
* The verify callback is a user-supplied callback that
* can clear / modify / add flags for a certificate. If set,
* the verification callback is called for each
* certificate in the chain (from the trust-ca down to the
* presented crt). The parameters for the callback are:
* (void *parameter, mbedtls_x509_crt *crt, int certificate_depth,
* int *flags). With the flags representing current flags for
* that specific certificate and the certificate depth from
* the bottom (Peer cert depth = 0).
*
* All flags left after returning from the callback
* are also returned to the application. The function should
* return 0 for anything but a fatal error.
*
* \note In case verification failed, the results can be displayed
* using \c mbedtls_x509_crt_verify_info()
*
* \note Same as \c mbedtls_x509_crt_verify_with_profile() with the
* default security profile.
*
* \param crt a certificate to be verified
* \param trust_ca the trusted CA chain
* \param ca_crl the CRL chain for trusted CA's
* \param cn expected Common Name (can be set to
* NULL if the CN must not be verified)
* \param flags result of the verification
* \param f_vrfy verification function
* \param p_vrfy verification parameter
*
* \return 0 if successful or MBEDTLS_ERR_X509_CERT_VERIFY_FAILED
* in which case *flags will have one or more
* MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX flags
* set,
* or another error in case of a fatal error encountered
* during the verification process.
*/
int mbedtls_x509_crt_verify( mbedtls_x509_crt *crt,
mbedtls_x509_crt *trust_ca,
mbedtls_x509_crl *ca_crl,
const char *cn, uint32_t *flags,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy );
/**
* \brief Verify the certificate signature according to profile
*
* \note Same as \c mbedtls_x509_crt_verify(), but with explicit
* security profile.
*
* \note The restrictions on keys (RSA minimum size, allowed curves
* for ECDSA) apply to all certificates: trusted root,
* intermediate CAs if any, and end entity certificate.
*
* \param crt a certificate to be verified
* \param trust_ca the trusted CA chain
* \param ca_crl the CRL chain for trusted CA's
* \param profile security profile for verification
* \param cn expected Common Name (can be set to
* NULL if the CN must not be verified)
* \param flags result of the verification
* \param f_vrfy verification function
* \param p_vrfy verification parameter
*
* \return 0 if successful or MBEDTLS_ERR_X509_CERT_VERIFY_FAILED
* in which case *flags will have one or more
* MBEDTLS_X509_BADCERT_XXX or MBEDTLS_X509_BADCRL_XXX flags
* set,
* or another error in case of a fatal error encountered
* during the verification process.
*/
int mbedtls_x509_crt_verify_with_profile( mbedtls_x509_crt *crt,
mbedtls_x509_crt *trust_ca,
mbedtls_x509_crl *ca_crl,
const mbedtls_x509_crt_profile *profile,
const char *cn, uint32_t *flags,
int (*f_vrfy)(void *, mbedtls_x509_crt *, int, uint32_t *),
void *p_vrfy );
#if defined(MBEDTLS_X509_CHECK_KEY_USAGE)
/**
* \brief Check usage of certificate against keyUsage extension.
*
* \param crt Leaf certificate used.
* \param usage Intended usage(s) (eg MBEDTLS_X509_KU_KEY_ENCIPHERMENT
* before using the certificate to perform an RSA key
* exchange).
*
* \note Except for decipherOnly and encipherOnly, a bit set in the
* usage argument means this bit MUST be set in the
* certificate. For decipherOnly and encipherOnly, it means
* that bit MAY be set.
*
* \return 0 is these uses of the certificate are allowed,
* MBEDTLS_ERR_X509_BAD_INPUT_DATA if the keyUsage extension
* is present but does not match the usage argument.
*
* \note You should only call this function on leaf certificates, on
* (intermediate) CAs the keyUsage extension is automatically
* checked by \c mbedtls_x509_crt_verify().
*/
int mbedtls_x509_crt_check_key_usage( const mbedtls_x509_crt *crt,
unsigned int usage );
#endif /* MBEDTLS_X509_CHECK_KEY_USAGE) */
#if defined(MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE)
/**
* \brief Check usage of certificate against extentedJeyUsage.
*
* \param crt Leaf certificate used.
* \param usage_oid Intended usage (eg MBEDTLS_OID_SERVER_AUTH or MBEDTLS_OID_CLIENT_AUTH).
* \param usage_len Length of usage_oid (eg given by MBEDTLS_OID_SIZE()).
*
* \return 0 if this use of the certificate is allowed,
* MBEDTLS_ERR_X509_BAD_INPUT_DATA if not.
*
* \note Usually only makes sense on leaf certificates.
*/
int mbedtls_x509_crt_check_extended_key_usage( const mbedtls_x509_crt *crt,
const char *usage_oid,
size_t usage_len );
#endif /* MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE) */
#if defined(MBEDTLS_X509_CRL_PARSE_C)
/**
* \brief Verify the certificate revocation status
*
* \param crt a certificate to be verified
* \param crl the CRL to verify against
*
* \return 1 if the certificate is revoked, 0 otherwise
*
*/
int mbedtls_x509_crt_is_revoked( const mbedtls_x509_crt *crt, const mbedtls_x509_crl *crl );
#endif /* MBEDTLS_X509_CRL_PARSE_C */
/**
* \brief Initialize a certificate (chain)
*
* \param crt Certificate chain to initialize
*/
void mbedtls_x509_crt_init( mbedtls_x509_crt *crt );
/**
* \brief Unallocate all certificate data
*
* \param crt Certificate chain to free
*/
void mbedtls_x509_crt_free( mbedtls_x509_crt *crt );
#endif /* MBEDTLS_X509_CRT_PARSE_C */
/* \} name */
/* \} addtogroup x509_module */
#if defined(MBEDTLS_X509_CRT_WRITE_C)
/**
* \brief Initialize a CRT writing context
*
* \param ctx CRT context to initialize
*/
void mbedtls_x509write_crt_init( mbedtls_x509write_cert *ctx );
/**
* \brief Set the verion for a Certificate
* Default: MBEDTLS_X509_CRT_VERSION_3
*
* \param ctx CRT context to use
* \param version version to set (MBEDTLS_X509_CRT_VERSION_1, MBEDTLS_X509_CRT_VERSION_2 or
* MBEDTLS_X509_CRT_VERSION_3)
*/
void mbedtls_x509write_crt_set_version( mbedtls_x509write_cert *ctx, int version );
/**
* \brief Set the serial number for a Certificate.
*
* \param ctx CRT context to use
* \param serial serial number to set
*
* \return 0 if successful
*/
int mbedtls_x509write_crt_set_serial( mbedtls_x509write_cert *ctx, const mbedtls_mpi *serial );
/**
* \brief Set the validity period for a Certificate
* Timestamps should be in string format for UTC timezone
* i.e. "YYYYMMDDhhmmss"
* e.g. "20131231235959" for December 31st 2013
* at 23:59:59
*
* \param ctx CRT context to use
* \param not_before not_before timestamp
* \param not_after not_after timestamp
*
* \return 0 if timestamp was parsed successfully, or
* a specific error code
*/
int mbedtls_x509write_crt_set_validity( mbedtls_x509write_cert *ctx, const char *not_before,
const char *not_after );
/**
* \brief Set the issuer name for a Certificate
* Issuer names should contain a comma-separated list
* of OID types and values:
* e.g. "C=UK,O=ARM,CN=mbed TLS CA"
*
* \param ctx CRT context to use
* \param issuer_name issuer name to set
*
* \return 0 if issuer name was parsed successfully, or
* a specific error code
*/
int mbedtls_x509write_crt_set_issuer_name( mbedtls_x509write_cert *ctx,
const char *issuer_name );
/**
* \brief Set the subject name for a Certificate
* Subject names should contain a comma-separated list
* of OID types and values:
* e.g. "C=UK,O=ARM,CN=mbed TLS Server 1"
*
* \param ctx CRT context to use
* \param subject_name subject name to set
*
* \return 0 if subject name was parsed successfully, or
* a specific error code
*/
int mbedtls_x509write_crt_set_subject_name( mbedtls_x509write_cert *ctx,
const char *subject_name );
/**
* \brief Set the subject public key for the certificate
*
* \param ctx CRT context to use
* \param key public key to include
*/
void mbedtls_x509write_crt_set_subject_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key );
/**
* \brief Set the issuer key used for signing the certificate
*
* \param ctx CRT context to use
* \param key private key to sign with
*/
void mbedtls_x509write_crt_set_issuer_key( mbedtls_x509write_cert *ctx, mbedtls_pk_context *key );
/**
* \brief Set the MD algorithm to use for the signature
* (e.g. MBEDTLS_MD_SHA1)
*
* \param ctx CRT context to use
* \param md_alg MD algorithm to use
*/
void mbedtls_x509write_crt_set_md_alg( mbedtls_x509write_cert *ctx, mbedtls_md_type_t md_alg );
/**
* \brief Generic function to add to or replace an extension in the
* CRT
*
* \param ctx CRT context to use
* \param oid OID of the extension
* \param oid_len length of the OID
* \param critical if the extension is critical (per the RFC's definition)
* \param val value of the extension OCTET STRING
* \param val_len length of the value data
*
* \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_crt_set_extension( mbedtls_x509write_cert *ctx,
const char *oid, size_t oid_len,
int critical,
const unsigned char *val, size_t val_len );
/**
* \brief Set the basicConstraints extension for a CRT
*
* \param ctx CRT context to use
* \param is_ca is this a CA certificate
* \param max_pathlen maximum length of certificate chains below this
* certificate (only for CA certificates, -1 is
* inlimited)
*
* \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_crt_set_basic_constraints( mbedtls_x509write_cert *ctx,
int is_ca, int max_pathlen );
#if defined(MBEDTLS_SHA1_C)
/**
* \brief Set the subjectKeyIdentifier extension for a CRT
* Requires that mbedtls_x509write_crt_set_subject_key() has been
* called before
*
* \param ctx CRT context to use
*
* \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_crt_set_subject_key_identifier( mbedtls_x509write_cert *ctx );
/**
* \brief Set the authorityKeyIdentifier extension for a CRT
* Requires that mbedtls_x509write_crt_set_issuer_key() has been
* called before
*
* \param ctx CRT context to use
*
* \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_crt_set_authority_key_identifier( mbedtls_x509write_cert *ctx );
#endif /* MBEDTLS_SHA1_C */
/**
* \brief Set the Key Usage Extension flags
* (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN)
*
* \param ctx CRT context to use
* \param key_usage key usage flags to set
*
* \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_crt_set_key_usage( mbedtls_x509write_cert *ctx,
unsigned int key_usage );
/**
* \brief Set the Netscape Cert Type flags
* (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL)
*
* \param ctx CRT context to use
* \param ns_cert_type Netscape Cert Type flags to set
*
* \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_crt_set_ns_cert_type( mbedtls_x509write_cert *ctx,
unsigned char ns_cert_type );
/**
* \brief Free the contents of a CRT write context
*
* \param ctx CRT context to free
*/
void mbedtls_x509write_crt_free( mbedtls_x509write_cert *ctx );
/**
* \brief Write a built up certificate to a X509 DER structure
* Note: data is written at the end of the buffer! Use the
* return value to determine where you should start
* using the buffer
*
* \param ctx certificate to write away
* \param buf buffer to write to
* \param size size of the buffer
* \param f_rng RNG function (for signature, see note)
* \param p_rng RNG parameter
*
* \return length of data written if successful, or a specific
* error code
*
* \note f_rng may be NULL if RSA is used for signature and the
* signature is made offline (otherwise f_rng is desirable
* for countermeasures against timing attacks).
* ECDSA signatures always require a non-NULL f_rng.
*/
int mbedtls_x509write_crt_der( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#if defined(MBEDTLS_PEM_WRITE_C)
/**
* \brief Write a built up certificate to a X509 PEM string
*
* \param ctx certificate to write away
* \param buf buffer to write to
* \param size size of the buffer
* \param f_rng RNG function (for signature, see note)
* \param p_rng RNG parameter
*
* \return 0 if successful, or a specific error code
*
* \note f_rng may be NULL if RSA is used for signature and the
* signature is made offline (otherwise f_rng is desirable
* for countermeasures against timing attacks).
* ECDSA signatures always require a non-NULL f_rng.
*/
int mbedtls_x509write_crt_pem( mbedtls_x509write_cert *ctx, unsigned char *buf, size_t size,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#endif /* MBEDTLS_PEM_WRITE_C */
#endif /* MBEDTLS_X509_CRT_WRITE_C */
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_x509_crt.h */
/**
* \file x509_csr.h
*
* \brief X.509 certificate signing request parsing and writing
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_X509_CSR_H
#define MBEDTLS_X509_CSR_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "x509.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* \addtogroup x509_module
* \{ */
/**
* \name Structures and functions for X.509 Certificate Signing Requests (CSR)
* \{
*/
/**
* Certificate Signing Request (CSR) structure.
*/
typedef struct mbedtls_x509_csr
{
mbedtls_x509_buf raw; /**< The raw CSR data (DER). */
mbedtls_x509_buf cri; /**< The raw CertificateRequestInfo body (DER). */
int version; /**< CSR version (1=v1). */
mbedtls_x509_buf subject_raw; /**< The raw subject data (DER). */
mbedtls_x509_name subject; /**< The parsed subject data (named information object). */
mbedtls_pk_context pk; /**< Container for the public key context. */
mbedtls_x509_buf sig_oid;
mbedtls_x509_buf sig;
mbedtls_md_type_t sig_md; /**< Internal representation of the MD algorithm of the signature algorithm, e.g. MBEDTLS_MD_SHA256 */
mbedtls_pk_type_t sig_pk; /**< Internal representation of the Public Key algorithm of the signature algorithm, e.g. MBEDTLS_PK_RSA */
void *sig_opts; /**< Signature options to be passed to mbedtls_pk_verify_ext(), e.g. for RSASSA-PSS */
}
mbedtls_x509_csr;
/**
* Container for writing a CSR
*/
typedef struct mbedtls_x509write_csr
{
mbedtls_pk_context *key;
mbedtls_asn1_named_data *subject;
mbedtls_md_type_t md_alg;
mbedtls_asn1_named_data *extensions;
}
mbedtls_x509write_csr;
#if defined(MBEDTLS_X509_CSR_PARSE_C)
/**
* \brief Load a Certificate Signing Request (CSR) in DER format
*
* \param csr CSR context to fill
* \param buf buffer holding the CRL data
* \param buflen size of the buffer
*
* \return 0 if successful, or a specific X509 error code
*/
int mbedtls_x509_csr_parse_der( mbedtls_x509_csr *csr,
const unsigned char *buf, size_t buflen );
/**
* \brief Load a Certificate Signing Request (CSR), DER or PEM format
*
* \param csr CSR context to fill
* \param buf buffer holding the CRL data
* \param buflen size of the buffer
* (including the terminating null byte for PEM data)
*
* \return 0 if successful, or a specific X509 or PEM error code
*/
int mbedtls_x509_csr_parse( mbedtls_x509_csr *csr, const unsigned char *buf, size_t buflen );
#if defined(MBEDTLS_FS_IO)
/**
* \brief Load a Certificate Signing Request (CSR)
*
* \param csr CSR context to fill
* \param path filename to read the CSR from
*
* \return 0 if successful, or a specific X509 or PEM error code
*/
int mbedtls_x509_csr_parse_file( mbedtls_x509_csr *csr, const char *path );
#endif /* MBEDTLS_FS_IO */
/**
* \brief Returns an informational string about the
* CSR.
*
* \param buf Buffer to write to
* \param size Maximum size of buffer
* \param prefix A line prefix
* \param csr The X509 CSR to represent
*
* \return The length of the string written (not including the
* terminated nul byte), or a negative error code.
*/
int mbedtls_x509_csr_info( char *buf, size_t size, const char *prefix,
const mbedtls_x509_csr *csr );
/**
* \brief Initialize a CSR
*
* \param csr CSR to initialize
*/
void mbedtls_x509_csr_init( mbedtls_x509_csr *csr );
/**
* \brief Unallocate all CSR data
*
* \param csr CSR to free
*/
void mbedtls_x509_csr_free( mbedtls_x509_csr *csr );
#endif /* MBEDTLS_X509_CSR_PARSE_C */
/* \} name */
/* \} addtogroup x509_module */
#if defined(MBEDTLS_X509_CSR_WRITE_C)
/**
* \brief Initialize a CSR context
*
* \param ctx CSR context to initialize
*/
void mbedtls_x509write_csr_init( mbedtls_x509write_csr *ctx );
/**
* \brief Set the subject name for a CSR
* Subject names should contain a comma-separated list
* of OID types and values:
* e.g. "C=UK,O=ARM,CN=mbed TLS Server 1"
*
* \param ctx CSR context to use
* \param subject_name subject name to set
*
* \return 0 if subject name was parsed successfully, or
* a specific error code
*/
int mbedtls_x509write_csr_set_subject_name( mbedtls_x509write_csr *ctx,
const char *subject_name );
/**
* \brief Set the key for a CSR (public key will be included,
* private key used to sign the CSR when writing it)
*
* \param ctx CSR context to use
* \param key Asymetric key to include
*/
void mbedtls_x509write_csr_set_key( mbedtls_x509write_csr *ctx, mbedtls_pk_context *key );
/**
* \brief Set the MD algorithm to use for the signature
* (e.g. MBEDTLS_MD_SHA1)
*
* \param ctx CSR context to use
* \param md_alg MD algorithm to use
*/
void mbedtls_x509write_csr_set_md_alg( mbedtls_x509write_csr *ctx, mbedtls_md_type_t md_alg );
/**
* \brief Set the Key Usage Extension flags
* (e.g. MBEDTLS_X509_KU_DIGITAL_SIGNATURE | MBEDTLS_X509_KU_KEY_CERT_SIGN)
*
* \param ctx CSR context to use
* \param key_usage key usage flags to set
*
* \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_csr_set_key_usage( mbedtls_x509write_csr *ctx, unsigned char key_usage );
/**
* \brief Set the Netscape Cert Type flags
* (e.g. MBEDTLS_X509_NS_CERT_TYPE_SSL_CLIENT | MBEDTLS_X509_NS_CERT_TYPE_EMAIL)
*
* \param ctx CSR context to use
* \param ns_cert_type Netscape Cert Type flags to set
*
* \return 0 if successful, or MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_csr_set_ns_cert_type( mbedtls_x509write_csr *ctx,
unsigned char ns_cert_type );
/**
* \brief Generic function to add to or replace an extension in the
* CSR
*
* \param ctx CSR context to use
* \param oid OID of the extension
* \param oid_len length of the OID
* \param val value of the extension OCTET STRING
* \param val_len length of the value data
*
* \return 0 if successful, or a MBEDTLS_ERR_X509_ALLOC_FAILED
*/
int mbedtls_x509write_csr_set_extension( mbedtls_x509write_csr *ctx,
const char *oid, size_t oid_len,
const unsigned char *val, size_t val_len );
/**
* \brief Free the contents of a CSR context
*
* \param ctx CSR context to free
*/
void mbedtls_x509write_csr_free( mbedtls_x509write_csr *ctx );
/**
* \brief Write a CSR (Certificate Signing Request) to a
* DER structure
* Note: data is written at the end of the buffer! Use the
* return value to determine where you should start
* using the buffer
*
* \param ctx CSR to write away
* \param buf buffer to write to
* \param size size of the buffer
* \param f_rng RNG function (for signature, see note)
* \param p_rng RNG parameter
*
* \return length of data written if successful, or a specific
* error code
*
* \note f_rng may be NULL if RSA is used for signature and the
* signature is made offline (otherwise f_rng is desirable
* for countermeasures against timing attacks).
* ECDSA signatures always require a non-NULL f_rng.
*/
int mbedtls_x509write_csr_der( mbedtls_x509write_csr *ctx, unsigned char *buf, size_t size,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#if defined(MBEDTLS_PEM_WRITE_C)
/**
* \brief Write a CSR (Certificate Signing Request) to a
* PEM string
*
* \param ctx CSR to write away
* \param buf buffer to write to
* \param size size of the buffer
* \param f_rng RNG function (for signature, see note)
* \param p_rng RNG parameter
*
* \return 0 if successful, or a specific error code
*
* \note f_rng may be NULL if RSA is used for signature and the
* signature is made offline (otherwise f_rng is desirable
* for couermeasures against timing attacks).
* ECDSA signatures always require a non-NULL f_rng.
*/
int mbedtls_x509write_csr_pem( mbedtls_x509write_csr *ctx, unsigned char *buf, size_t size,
int (*f_rng)(void *, unsigned char *, size_t),
void *p_rng );
#endif /* MBEDTLS_PEM_WRITE_C */
#endif /* MBEDTLS_X509_CSR_WRITE_C */
#ifdef __cplusplus
}
#endif
#endif /* mbedtls_x509_csr.h */
/**
* \file xtea.h
*
* \brief XTEA block cipher (32-bit)
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_XTEA_H
#define MBEDTLS_XTEA_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#define MBEDTLS_XTEA_ENCRYPT 1
#define MBEDTLS_XTEA_DECRYPT 0
#define MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH -0x0028 /**< The data input has an invalid length. */
#if !defined(MBEDTLS_XTEA_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief XTEA context structure
*/
typedef struct
{
uint32_t k[4]; /*!< key */
}
mbedtls_xtea_context;
/**
* \brief Initialize XTEA context
*
* \param ctx XTEA context to be initialized
*/
void mbedtls_xtea_init( mbedtls_xtea_context *ctx );
/**
* \brief Clear XTEA context
*
* \param ctx XTEA context to be cleared
*/
void mbedtls_xtea_free( mbedtls_xtea_context *ctx );
/**
* \brief XTEA key schedule
*
* \param ctx XTEA context to be initialized
* \param key the secret key
*/
void mbedtls_xtea_setup( mbedtls_xtea_context *ctx, const unsigned char key[16] );
/**
* \brief XTEA cipher function
*
* \param ctx XTEA context
* \param mode MBEDTLS_XTEA_ENCRYPT or MBEDTLS_XTEA_DECRYPT
* \param input 8-byte input block
* \param output 8-byte output block
*
* \return 0 if successful
*/
int mbedtls_xtea_crypt_ecb( mbedtls_xtea_context *ctx,
int mode,
const unsigned char input[8],
unsigned char output[8] );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief XTEA CBC cipher function
*
* \param ctx XTEA context
* \param mode MBEDTLS_XTEA_ENCRYPT or MBEDTLS_XTEA_DECRYPT
* \param length the length of input, multiple of 8
* \param iv initialization vector for CBC mode
* \param input input block
* \param output output block
*
* \return 0 if successful,
* MBEDTLS_ERR_XTEA_INVALID_INPUT_LENGTH if the length % 8 != 0
*/
int mbedtls_xtea_crypt_cbc( mbedtls_xtea_context *ctx,
int mode,
size_t length,
unsigned char iv[8],
const unsigned char *input,
unsigned char *output);
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_XTEA_ALT */
#include "xtea_alt.h"
#endif /* MBEDTLS_XTEA_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_xtea_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* xtea.h */
......@@ -54,4 +54,17 @@ static inline uint32_t rtc_reg_read(uint32_t addr)
rtc_memw();
return *((volatile uint32_t*)addr);
}
static inline void rtc_reg_write_and_loop(uint32_t addr, uint32_t val)
{
addr+=RTC_MMIO_BASE;
rtc_memw();
asm("j 1f\n"
".align 32\n"
"1:\n"
"s32i.n %1,%0,0\n"
"2:\n"
"j 2b\n"::"r"(addr),"r"(val):);
}
#endif
......@@ -396,6 +396,8 @@ static inline void rtc_time_add_sleep_tracking(uint32_t us, uint32_t cycles)
}
}
extern void rtc_time_enter_deep_sleep_final(void);
static void rtc_time_enter_deep_sleep_us(uint32_t us)
{
if (rtc_time_check_wake_magic())
......@@ -430,14 +432,14 @@ static void rtc_time_enter_deep_sleep_us(uint32_t us)
rtc_reg_write(0x9c,17);
rtc_reg_write(0xa0,3);
// Clear bit 0 of DPORT 0x04. Doesn't seem to be necessary
// wm(0x3fff0004,bitrm(0x3fff0004),0xfffffffe));
volatile uint32_t* dport4=(volatile uint32_t*)0x3ff00004;
*dport4&=0xfffffffe;
rtc_reg_write(0x40,-1);
rtc_reg_write(0x44,32);
rtc_reg_write(0x10,0);
rtc_reg_write(0x18,8);
rtc_reg_write(0x08,0x00100000); // go to sleep
rtc_time_enter_deep_sleep_final();
}
static inline void rtc_time_deep_sleep_us(uint32_t us)
......
#ifndef _SECTIONS_H_
#define _SECTIONS_H_
#define TEXT_SECTION_ATTR __attribute__((section(".text")))
#define RAM_CONST_SECTION_ATTR __attribute((section(".data")))
#define TEXT_SECTION_ATTR __attribute__((section(".iram0.text")))
#define RAM_CONST_SECTION_ATTR __attribute((section(".rodata.dram")))
#endif
/*
* ESPRSSIF MIT License
*
* Copyright (c) 2016 <ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD>
*
* Permission is hereby granted for use on ESPRESSIF SYSTEMS ESP8266 only, in which case,
* it is free of charge, to any person obtaining a copy of this software and associated
* documentation files (the "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the Software is furnished
* to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef ESPCONN_MEM_H_
#define ESPCONN_MEM_H_
void *espconn_memzalloc(size_t size);
void espconn_memfree(void *fp);
void *espconn_memcpy(void *dst, const void *src, size_t size);
#endif
/*
* ESPRSSIF MIT License
*
* Copyright (c) 2016 <ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD>
*
* Permission is hereby granted for use on ESPRESSIF SYSTEMS ESP8266 only, in which case,
* it is free of charge, to any person obtaining a copy of this software and associated
* documentation files (the "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the Software is furnished
* to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef ESPCONN_MBEDTLS_H_
#define ESPCONN_MBEDTLS_H_
#include "lwip/ip.h"
#include "lwip/app/espconn.h"
#include "user_interface.h"
#if !defined(ESPCONN_MBEDTLS)
#include "mbedtls/net.h"
#include "mbedtls/debug.h"
#include "mbedtls/ssl.h"
#include "mbedtls/entropy.h"
#include "mbedtls/ctr_drbg.h"
typedef struct espconn *pmbedtls_espconn;
typedef struct espconn mbedtls_espconn;
typedef struct{
int record_len;
}mbedtls_record;
#if defined(ESP8266_PLATFORM)
typedef struct{
uint8* finished_buf;
int finished_len;
}mbedtls_finished, *pmbedtls_finished;
#endif
typedef struct{
// mbedtls_entropy_context entropy;
mbedtls_x509_crt cacert;
mbedtls_x509_crt clicert;
mbedtls_pk_context pkey;
}mbedtls_session, *pmbedtls_session;
typedef struct{
bool quiet;
mbedtls_record record;
#if defined(ESP8266_PLATFORM)
pmbedtls_finished pfinished;
#endif
pmbedtls_session psession;
mbedtls_net_context fd;
mbedtls_net_context listen_fd;
mbedtls_ctr_drbg_context ctr_drbg;
mbedtls_ssl_context ssl;
mbedtls_ssl_config conf;
mbedtls_entropy_context entropy;
bool SentFnFlag;
sint32 verify_result;
}mbedtls_msg, *pmbedtls_msg;
typedef enum {
ESPCONN_CERT_OWN,
ESPCONN_CERT_AUTH,
ESPCONN_PK,
ESPCONN_PASSWORD
}mbedtls_auth_type;
typedef enum {
ESPCONN_IDLE = 0,
ESPCONN_CLIENT,
ESPCONN_SERVER,
ESPCONN_BOTH,
ESPCONN_MAX
}espconn_level;
typedef struct _file_head{
char file_name[32];
uint16_t file_length;
}file_head;
typedef struct _file_param{
file_head file_head;
int32 file_offerset;
}file_param;
typedef struct _ssl_sector{
uint32 sector;
bool flag;
}ssl_sector;
struct ssl_packet{
uint8* pbuffer;
uint16 buffer_size;
ssl_sector cert_ca_sector;
ssl_sector cert_req_sector;
};
typedef struct _ssl_opt {
struct ssl_packet server;
struct ssl_packet client;
uint8 type;
}ssl_opt;
typedef struct{
mbedtls_auth_type auth_type;
espconn_level auth_level;
}mbedtls_auth_info;
#define SSL_KEEP_INTVL 1
#define SSL_KEEP_CNT 5
#define SSL_KEEP_IDLE 90
#define ssl_keepalive_enable(pcb) ((pcb)->so_options |= SOF_KEEPALIVE)
#define ssl_keepalive_disable(pcb) ((pcb)->so_options &= ~SOF_KEEPALIVE)
enum {
SIG_ESPCONN_TLS_ERRER = 0x3B
};
#define ESPCONN_SECURE_MAX_SIZE 8192
#define ESPCONN_SECURE_DEFAULT_HEAP 0x3800
#define ESPCONN_SECURE_DEFAULT_SIZE 0x0800
#define ESPCONN_HANDSHAKE_TIMEOUT 0x3C
#define ESPCONN_INVALID_TYPE 0xFFFFFFFF
#define MBEDTLS_SSL_PLAIN_ADD TCP_MSS
#define FLASH_SECTOR_SIZE 4096
extern ssl_opt ssl_option;
typedef struct{
uint32 parame_sec;
uint32 parame_type;
uint32 parame_datalen;
char* parame_data;
}mbedtls_parame, *pmbedtls_parame;
/*
* Storage format identifiers
* Recognized formats: PEM and DER
*/
typedef enum{
ESPCONN_FORMAT_INIT = 0,
ESPCONN_FORMAT_DER = 1,
ESPCONN_FORMAT_PEM = 2,
ESPCONN_FORMAT_INVALID
}espconn_format;
#define ESPCONN_EVENT_RECV(pcb,p,err) \
do { \
if((pcb)!= NULL && (pcb)->recv_callback != NULL) { \
(pcb)->state = ESPCONN_READ; \
(pcb)->recv_callback((pcb),(p),(err));\
(pcb)->state = ESPCONN_CONNECT; \
} else { \
ESP_LOG("%s %d\n", __FILE__, __LINE__); \
} \
} while (0)
#define ESPCONN_EVENT_SEND(pcb) \
do { \
if((pcb)!= NULL && (pcb)->sent_callback != NULL) { \
(pcb)->state = ESPCONN_CONNECT; \
(pcb)->sent_callback(pcb);\
} else { \
ESP_LOG("%s %d\n", __FILE__, __LINE__); \
} \
} while (0)
#define ESPCONN_EVENT_CONNECTED(pcb) \
do { \
if((pcb)!= NULL && (pcb)->proto.tcp != NULL && (pcb)->proto.tcp->connect_callback != NULL) { \
(pcb)->state = ESPCONN_CONNECT; \
(pcb)->proto.tcp->connect_callback(pcb);\
} else { \
ESP_LOG("%s %d\n", __FILE__, __LINE__); \
} \
} while (0)
#define ESPCONN_EVENT_CLOSED(pcb) \
do { \
if((pcb)!= NULL && (pcb)->proto.tcp != NULL && (pcb)->proto.tcp->disconnect_callback != NULL) { \
(pcb)->state = ESPCONN_CLOSE; \
(pcb)->proto.tcp->disconnect_callback(pcb);\
} else { \
ESP_LOG("%s %d\n", __FILE__, __LINE__); \
} \
} while (0)
#define ESPCONN_EVENT_ERROR(pcb,err) \
do { \
if((pcb)!= NULL && (pcb)->proto.tcp != NULL && (pcb)->proto.tcp->reconnect_callback != NULL) { \
(pcb)->state = ESPCONN_CLOSE; \
(pcb)->proto.tcp->reconnect_callback(pcb,err);\
} else { \
ESP_LOG("%s %d\n", __FILE__, __LINE__); \
} \
} while (0)
/******************************************************************************
* FunctionName : mbedtls_load_default_obj
* Description : Initialize the server: set up a listen PCB and bind it to
* the defined port
* Parameters : espconn -- the espconn used to build client
* Returns : none
*******************************************************************************/
bool mbedtls_load_default_obj(uint32 flash_sector, int obj_type, const unsigned char *load_buf, uint16 length);
/******************************************************************************
* FunctionName : sslserver_start
* Description : Initialize the server: set up a listen PCB and bind it to
* the defined port
* Parameters : espconn -- the espconn used to build client
* Returns : none
*******************************************************************************/
extern sint8 espconn_ssl_server(struct espconn *espconn);
/******************************************************************************
* FunctionName : espconn_ssl_client
* Description : Initialize the client: set up a connect PCB and bind it to
* the defined port
* Parameters : espconn -- the espconn used to build client
* Returns : none
*******************************************************************************/
extern sint8 espconn_ssl_client(struct espconn *espconn);
/******************************************************************************
* FunctionName : espconn_ssl_write
* Description : sent data for client or server
* Parameters : void *arg -- client or server to send
* uint8* psent -- Data to send
* uint16 length -- Length of data to send
* Returns : none
*******************************************************************************/
extern void espconn_ssl_sent(void *arg, uint8 *psent, uint16 length);
/******************************************************************************
* FunctionName : espconn_ssl_disconnect
* Description : A new incoming connection has been disconnected.
* Parameters : espconn -- the espconn used to disconnect with host
* Returns : none
*******************************************************************************/
extern void espconn_ssl_disconnect(espconn_msg *pdis);
/******************************************************************************
* FunctionName : espconn_secure_get_size
* Description : get buffer size for client or server
* Parameters : level -- set for client or server
* 1: client,2:server,3:client and server
* Returns : buffer size for client or server
*******************************************************************************/
extern sint16 espconn_secure_get_size(uint8 level);
#endif
#endif /* ESPCONN_MBEDTLS_H_ */
#include "lwip/app/espconn_buf.h"
\ No newline at end of file
/*
* ESPRSSIF MIT License
*
* Copyright (c) 2016 <ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD>
*
* Permission is hereby granted for use on ESPRESSIF SYSTEMS ESP8266 only, in which case,
* it is free of charge, to any person obtaining a copy of this software and associated
* documentation files (the "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the Software is furnished
* to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef ESP_SOCKET_H_
#define ESP_SOCKET_H_
#include "lwip/inet.h"
#include "lwip/opt.h"
#include "sys/ringbuf.h"
#if 0
#define ESP_LOG os_printf
#else
#define ESP_LOG(...)
#endif
#define NUM_SOCKETS 3
#define ESP_OK 0 /* No error, everything OK. */
#define ESP_MEM -1 /* Out of memory error. */
#define ESP_TIMEOUT -3 /* Timeout. */
#define ESP_RTE -4 /* Routing problem. */
#define ESP_INPROGRESS -5 /* Operation in progress */
#define ESP_MAXNUM -7 /* Total number exceeds the set maximum*/
#define ESP_ABRT -8 /* Connection aborted. */
#define ESP_RST -9 /* Connection reset. */
#define ESP_CLSD -10 /* Connection closed. */
#define ESP_CONN -11 /* Not connected. */
#define ESP_ARG -12 /* Illegal argument. */
#define ESP_IF -14 /* Low_level error */
#define ESP_ISCONN -15 /* Already connected. */
typedef enum{
NETCONN_STATE_NONE = 0,
NETCONN_STATE_ESTABLISHED,
NETCONN_STATE_WRITE,
NETCONN_STATE_READ,
NETCONN_STATE_CLOSED,
NETCONN_STATE_ERROR,
NETCONN_STATE_SUMNUM
}netconn_state;
#if (!defined(lwIP_unlikely))
#define lwIP_unlikely(Expression) !!(Expression)
#endif
#define lwIP_ASSERT(Expression) do{if (!(Expression)) ESP_LOG("%d\n", __LINE__);}while(0)
#define lwIP_REQUIRE_ACTION(Expression,Label,Action) \
do{\
if (lwIP_unlikely(!(Expression))) \
{\
ESP_LOG("%d\n", __LINE__);\
{Action;}\
goto Label;\
}\
}while(0)
#define lwIP_REQUIRE_NOERROR(Expression,Label) \
do{\
int LocalError;\
LocalError = (int)Expression;\
if (lwIP_unlikely(LocalError != 0)) \
{\
ESP_LOG("%d 0x%x\n", __LINE__, LocalError);\
goto Label;\
}\
}while(0)
#define lwIP_REQUIRE_NOERROR_ACTION(Expression,Label,Action) \
do{\
int LocalError;\
LocalError = (int)Expression;\
if (lwIP_unlikely(LocalError != 0)) \
{\
ESP_LOG("%d\n", __LINE__);\
{Action;}\
goto Label;\
}\
}while(0)
#define lwIP_EVENT_PARSE(s, error) \
do { \
mbedtls_parse_internal(s, error); \
} while (0)
#define lwIP_EVENT_THREAD(s, event, error) \
do { \
mbedtls_parse_thread(s, event, error); \
}while(0)
typedef enum{
ENTCONN_EVENT_NONE = 0,
NETCONN_EVENT_ESTABLISHED = 1,
ENTCONN_EVENT_RECV = 2,
NETCONN_EVENT_SEND = 3,
NETCONN_EVENT_ERROR = 4,
NETCONN_EVENT_CLOSE = 5,
NETCONN_EVENT_SUMNUM = 6
}netconn_event;
typedef enum _netconn_type {
NETCONN_INVALID = 0,
/* ESPCONN_TCP Group */
NETCONN_TCP = 0x10,
/* ESPCONN_UDP Group */
NETCONN_UDP = 0x20,
} netconn_type;
/* members are in network byte order */
struct sockaddr_in {
u8_t sin_len;
u8_t sin_family;
u16_t sin_port;
struct in_addr sin_addr;
char sin_zero[8];
};
/** A netconn descriptor */
typedef struct _lwIP_netconn{
/** flags blocking or nonblocking defines */
uint8 flags;
/** type of the lwIP_netconn (TCP, UDP) */
netconn_type type;
/** current state of the lwIP_netconn */
netconn_state state;
/** the lwIP internal protocol control block */
struct tcp_pcb *tcp;
/**the new socket is unknown and sync*/
void *acceptmbox;
/**the lwIP internal buffer control block*/
ringbuf *readbuf;
/** only used for socket layer */
int socket;
}lwIP_netconn, *lwIPNetconn;
/** Contains all internal pointers and states used for a socket */
typedef struct _lwIP_sock{
/** sockets currently are built on lwIP_netconn, each socket has one lwIP_netconn */
lwIP_netconn *conn;
/** data that was left from the previous read */
u32_t recv_index;
u32_t send_index;
u32_t recv_data_len;
void *send_buffer;
}lwIP_sock;
typedef uint8 sa_family_t;
struct sockaddr {
uint8 sa_len;
sa_family_t sa_family;
char sa_data[14];
};
typedef uint32 socklen_t;
#define NETCONNTYPE_GROUP(t) ((t)&0xF0)
#define NETCONNTYPE_DATAGRAM(t) ((t)&0xE0)
#define AF_UNSPEC 0
#define AF_INET 2
/* Socket protocol types (TCP/UDP/RAW) */
#define SOCK_STREAM 1
#define SOCK_DGRAM 2
#define SOCK_RAW 3
#define lwIPThreadPrio 25
#define lwIPThreadQueueLen 15
/*
* Option flags per-socket. These must match the SOF_ flags in ip.h (checked in init.c)
*/
#define SO_DEBUG 0x0001 /* Unimplemented: turn on debugging info recording */
#define SO_ACCEPTCONN 0x0002 /* socket has had listen() */
#define SO_REUSEADDR 0x0004 /* Allow local address reuse */
#define SO_KEEPALIVE 0x0008 /* keep connections alive */
#define SO_DONTROUTE 0x0010 /* Unimplemented: just use interface addresses */
#define SO_BROADCAST 0x0020 /* permit to send and to receive broadcast messages (see IP_SOF_BROADCAST option) */
#define SO_USELOOPBACK 0x0040 /* Unimplemented: bypass hardware when possible */
#define SO_LINGER 0x0080 /* linger on close if data present */
#define SO_OOBINLINE 0x0100 /* Unimplemented: leave received OOB data in line */
#define SO_REUSEPORT 0x0200 /* Unimplemented: allow local address & port reuse */
/*
* Additional options, not kept in so_options.
*/
#define SO_SNDBUF 0x1001 /* Unimplemented: send buffer size */
#define SO_RCVBUF 0x1002 /* receive buffer size */
#define SO_TYPE 0x1008 /* get socket type */
#define IPPROTO_IP 0
#define IPPROTO_TCP 6
#define IPPROTO_UDP 17
#define SOL_SOCKET 0xfff /* options for socket level */
#if LWIP_TCP
/*
* Options for level IPPROTO_TCP
*/
#define TCP_NODELAY 0x01 /* don't delay send to coalesce packets */
#define TCP_KEEPALIVE 0x02 /* send KEEPALIVE probes when idle for pcb->keep_idle milliseconds */
#define TCP_KEEPIDLE 0x03 /* set pcb->keep_idle - Same as TCP_KEEPALIVE, but use seconds for get/setsockopt */
#define TCP_KEEPINTVL 0x04 /* set pcb->keep_intvl - Use seconds for get/setsockopt */
#define TCP_KEEPCNT 0x05 /* set pcb->keep_cnt - Use number of probes sent for get/setsockopt */
#endif /* LWIP_TCP */
/* commands for fnctl */
#ifndef F_GETFL
#define F_GETFL 3
#endif
#ifndef F_SETFL
#define F_SETFL 4
#endif
/* File status flags and file access modes for fnctl,
these are bits in an int. */
#ifndef O_NONBLOCK
#define O_NONBLOCK 1 /* nonblocking I/O */
#endif
#ifndef O_NDELAY
#define O_NDELAY 1 /* same as O_NONBLOCK, for compatibility */
#endif
struct timeval {
long tv_sec; /* seconds */
long tv_usec; /* and microseconds */
};
/* Flags for struct netconn.flags (u8_t) */
/** TCP: when data passed to netconn_write doesn't fit into the send buffer,
this temporarily stores whether to wake up the original application task
if data couldn't be sent in the first try. */
#define NETCONN_FLAG_WRITE_DELAYED 0x01
/** Should this netconn avoid blocking? */
#define NETCONN_FLAG_NON_BLOCKING 0x02
/** Was the last connect action a non-blocking one? */
#define NETCONN_FLAG_IN_NONBLOCKING_CONNECT 0x04
/** If this is set, a TCP netconn must call netconn_recved() to update
the TCP receive window (done automatically if not set). */
#define NETCONN_FLAG_NO_AUTO_RECVED 0x08
/** If a nonblocking write has been rejected before, poll_tcp needs to
check if the netconn is writable again */
#define NETCONN_FLAG_CHECK_WRITESPACE 0x10
/** Set the blocking status of netconn calls (@todo: write/send is missing) */
#define netconn_set_nonblocking(conn, val) do { if(val) { \
(conn)->flags |= NETCONN_FLAG_NON_BLOCKING; \
} else { \
(conn)->flags &= ~ NETCONN_FLAG_NON_BLOCKING; }} while(0)
/** Get the blocking status of netconn calls (@todo: write/send is missing) */
#define netconn_is_nonblocking(conn) (((conn)->flags & NETCONN_FLAG_NON_BLOCKING) != 0)
/* FD_SET used for lwip_select */
#ifndef FD_SET
#undef FD_SETSIZE
/* Make FD_SETSIZE match NUM_SOCKETS in socket.c */
#define FD_SETSIZE NUM_SOCKETS
#define FD_SET(n, p) ((p)->fd_bits[(n)/8] |= (1 << ((n) & 7)))
#define FD_CLR(n, p) ((p)->fd_bits[(n)/8] &= ~(1 << ((n) & 7)))
#define FD_ISSET(n,p) ((p)->fd_bits[(n)/8] & (1 << ((n) & 7)))
#define FD_ZERO(p) os_memset((void*)(p),0,sizeof(*(p)))
typedef struct fd_set {
unsigned char fd_bits[(FD_SETSIZE + 7) / 8];
} fd_set;
#endif /* FD_SET */
void lwip_socket_init(void);
int lwip_accept(int s, struct sockaddr *addr, socklen_t *addrlen);
int lwip_bind(int s, const struct sockaddr *name, socklen_t namelen);
int lwip_shutdown(int s, int how);
int lwip_getpeername(int s, struct sockaddr *name, socklen_t *namelen);
int lwip_getsockname(int s, struct sockaddr *name, socklen_t *namelen);
int lwip_getsockopt(int s, int level, int optname, void *optval,socklen_t *optlen);
int lwip_setsockopt(int s, int level, int optname, const void *optval,socklen_t optlen);
int lwip_close(int s);
int lwip_connect(int s, const struct sockaddr *name, socklen_t namelen);
int lwip_listen(int s, int backlog);
int lwip_recv(int s, void *mem, size_t len, int flags);
int lwip_read(int s, void *mem, size_t len);
int lwip_recvfrom(int s, void *mem, size_t len, int flags,struct sockaddr *from, socklen_t *fromlen);
int lwip_send(int s, const void *dataptr, size_t size, int flags);
int lwip_sendto(int s, const void *dataptr, size_t size, int flags,const struct sockaddr *to, socklen_t tolen);
int lwip_socket(int domain, int type, int protocol);
int lwip_write(int s, const void *dataptr, size_t size);
int lwip_select(int maxfdp1, fd_set *readset, fd_set *writeset,fd_set *exceptset, struct timeval *timeout);
int lwip_ioctl(int s, long cmd, void *argp);
int lwip_fcntl(int s, int cmd, int val);
uint32_t lwip_getul(char *str);
#define accept(a,b,c) lwip_accept(a,b,c)
#define bind(a,b,c) lwip_bind(a,b,c)
#define shutdown(a,b) lwip_shutdown(a,b)
#define closesocket(s) lwip_close(s)
#define connect(a,b,c) lwip_connect(a,b,c)
#define getsockname(a,b,c) lwip_getsockname(a,b,c)
#define getpeername(a,b,c) lwip_getpeername(a,b,c)
#define setsockopt(a,b,c,d,e) lwip_setsockopt(a,b,c,d,e)
#define getsockopt(a,b,c,d,e) lwip_getsockopt(a,b,c,d,e)
#define listen(a,b) lwip_listen(a,b)
#define recv(a,b,c,d) lwip_recv(a,b,c,d)
#define recvfrom(a,b,c,d,e,f) lwip_recvfrom(a,b,c,d,e,f)
#define send(a,b,c,d) lwip_send(a,b,c,d)
#define sendto(a,b,c,d,e,f) lwip_sendto(a,b,c,d,e,f)
#define socket(a,b,c) lwip_socket(a,b,c)
#define select(a,b,c,d,e) lwip_select(a,b,c,d,e)
#define ioctlsocket(a,b,c) lwip_ioctl(a,b,c)
#define read(a,b,c) lwip_read(a,b,c)
#define write(a,b,c) lwip_write(a,b,c)
#define close(s) lwip_close(s)
#define getul(s) lwip_getul(s)
#endif /* ESPCONN_SOCKT_H_ */
#include "c_types.h"
#undef MBEDTLS_HAVE_ASM
#undef MBEDTLS_HAVE_SSE2
#define MBEDTLS_HAVE_TIME
#define MBEDTLS_HAVE_TIME_DATE
#undef MBEDTLS_PLATFORM_MEMORY
#undef MBEDTLS_PLATFORM_NO_STD_FUNCTIONS
#undef MBEDTLS_PLATFORM_EXIT_ALT
#undef MBEDTLS_PLATFORM_TIME_ALT
#undef MBEDTLS_PLATFORM_FPRINTF_ALT
#undef MBEDTLS_PLATFORM_PRINTF_ALT
#undef MBEDTLS_PLATFORM_SNPRINTF_ALT
#undef MBEDTLS_PLATFORM_NV_SEED_ALT
#undef MBEDTLS_DEPRECATED_WARNING
#define MBEDTLS_DEPRECATED_REMOVED
#undef MBEDTLS_TIMING_ALT
#undef MBEDTLS_AES_ALT
#undef MBEDTLS_ARC4_ALT
#undef MBEDTLS_BLOWFISH_ALT
#undef MBEDTLS_CAMELLIA_ALT
#undef MBEDTLS_DES_ALT
#undef MBEDTLS_XTEA_ALT
#undef MBEDTLS_MD2_ALT
#undef MBEDTLS_MD4_ALT
#undef MBEDTLS_MD5_ALT
#undef MBEDTLS_RIPEMD160_ALT
#undef MBEDTLS_SHA1_ALT
#undef MBEDTLS_SHA256_ALT
#undef MBEDTLS_SHA512_ALT
#undef MBEDTLS_MD2_PROCESS_ALT
#undef MBEDTLS_MD4_PROCESS_ALT
#undef MBEDTLS_MD5_PROCESS_ALT
#undef MBEDTLS_RIPEMD160_PROCESS_ALT
#undef MBEDTLS_SHA1_PROCESS_ALT
#undef MBEDTLS_SHA256_PROCESS_ALT
#undef MBEDTLS_SHA512_PROCESS_ALT
#undef MBEDTLS_DES_SETKEY_ALT
#undef MBEDTLS_DES_CRYPT_ECB_ALT
#undef MBEDTLS_DES3_CRYPT_ECB_ALT
#undef MBEDTLS_AES_SETKEY_ENC_ALT
#undef MBEDTLS_AES_SETKEY_DEC_ALT
#undef MBEDTLS_AES_ENCRYPT_ALT
#undef MBEDTLS_AES_DECRYPT_ALT
#undef MBEDTLS_TEST_NULL_ENTROPY
#define MBEDTLS_ENTROPY_HARDWARE_ALT
#define MBEDTLS_AES_ROM_TABLES
#define MBEDTLS_CAMELLIA_SMALL_MEMORY
#define MBEDTLS_CIPHER_MODE_CBC
#define MBEDTLS_CIPHER_MODE_CFB
#define MBEDTLS_CIPHER_MODE_CTR
#undef MBEDTLS_CIPHER_NULL_CIPHER
#define MBEDTLS_CIPHER_PADDING_PKCS7
#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS
#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN
#define MBEDTLS_CIPHER_PADDING_ZEROS
#undef MBEDTLS_ENABLE_WEAK_CIPHERSUITES
#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES
#define MBEDTLS_ECP_DP_SECP192R1_ENABLED
#define MBEDTLS_ECP_DP_SECP224R1_ENABLED
#define MBEDTLS_ECP_DP_SECP256R1_ENABLED
#define MBEDTLS_ECP_DP_SECP384R1_ENABLED
#define MBEDTLS_ECP_DP_SECP521R1_ENABLED
#define MBEDTLS_ECP_DP_SECP192K1_ENABLED
#define MBEDTLS_ECP_DP_SECP224K1_ENABLED
#define MBEDTLS_ECP_DP_SECP256K1_ENABLED
#define MBEDTLS_ECP_DP_BP256R1_ENABLED
#define MBEDTLS_ECP_DP_BP384R1_ENABLED
#define MBEDTLS_ECP_DP_BP512R1_ENABLED
#define MBEDTLS_ECP_DP_CURVE25519_ENABLED
#define MBEDTLS_ECP_NIST_OPTIM
#undef MBEDTLS_ECDSA_DETERMINISTIC
#undef MBEDTLS_KEY_EXCHANGE_PSK_ENABLED
#undef MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED
#undef MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED
#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED
#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED
#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED
#undef MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED
#undef MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED
#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED
#undef MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED
#define MBEDTLS_PK_PARSE_EC_EXTENDED
#undef MBEDTLS_ERROR_STRERROR_DUMMY
#define MBEDTLS_GENPRIME
#undef MBEDTLS_FS_IO
#undef MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES
#define MBEDTLS_NO_PLATFORM_ENTROPY
#define MBEDTLS_ENTROPY_FORCE_SHA256
#undef MBEDTLS_ENTROPY_NV_SEED
#undef MBEDTLS_MEMORY_DEBUG
#undef MBEDTLS_MEMORY_BACKTRACE
#define MBEDTLS_PK_RSA_ALT_SUPPORT
#define MBEDTLS_PKCS1_V15
#define MBEDTLS_PKCS1_V21
#undef MBEDTLS_RSA_NO_CRT
#undef MBEDTLS_SELF_TEST
#define MBEDTLS_SHA256_SMALLER
#undef MBEDTLS_SSL_AEAD_RANDOM_IV
#define MBEDTLS_SSL_ALL_ALERT_MESSAGES
#undef MBEDTLS_SSL_DEBUG_ALL
#define MBEDTLS_SSL_ENCRYPT_THEN_MAC
#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET
#define MBEDTLS_SSL_FALLBACK_SCSV
#undef MBEDTLS_SSL_HW_RECORD_ACCEL
#define MBEDTLS_SSL_CBC_RECORD_SPLITTING
#define MBEDTLS_SSL_RENEGOTIATION
#undef MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO
#undef MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE
#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH
#undef MBEDTLS_SSL_PROTO_SSL3
#define MBEDTLS_SSL_PROTO_TLS1
#define MBEDTLS_SSL_PROTO_TLS1_1
#define MBEDTLS_SSL_PROTO_TLS1_2
#define MBEDTLS_SSL_PROTO_DTLS
#define MBEDTLS_SSL_ALPN
#define MBEDTLS_SSL_DTLS_ANTI_REPLAY
#define MBEDTLS_SSL_DTLS_HELLO_VERIFY
#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE
#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT
#define MBEDTLS_SSL_SESSION_TICKETS
#define MBEDTLS_SSL_EXPORT_KEYS
#define MBEDTLS_SSL_SERVER_NAME_INDICATION
#define MBEDTLS_SSL_TRUNCATED_HMAC
#undef MBEDTLS_THREADING_ALT
#undef MBEDTLS_THREADING_PTHREAD
#define MBEDTLS_VERSION_FEATURES
#undef MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3
#undef MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION
#define MBEDTLS_X509_CHECK_KEY_USAGE
#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE
#define MBEDTLS_X509_RSASSA_PSS_SUPPORT
#undef MBEDTLS_ZLIB_SUPPORT
#undef MBEDTLS_AESNI_C
#define MBEDTLS_AES_C
#define MBEDTLS_ARC4_C
#define MBEDTLS_ASN1_PARSE_C
#define MBEDTLS_ASN1_WRITE_C
#define MBEDTLS_BASE64_C
#define MBEDTLS_BIGNUM_C
#define MBEDTLS_BLOWFISH_C
#define MBEDTLS_CAMELLIA_C
#define MBEDTLS_CCM_C
#undef MBEDTLS_CERTS_C
#define MBEDTLS_CIPHER_C
#define MBEDTLS_CTR_DRBG_C
#undef MBEDTLS_DEBUG_C
#define MBEDTLS_DES_C
#define MBEDTLS_DHM_C
#define MBEDTLS_ECDH_C
#undef MBEDTLS_ECDSA_C
#undef MBEDTLS_ECJPAKE_C
#define MBEDTLS_ECP_C
#define MBEDTLS_ENTROPY_C
#define MBEDTLS_ERROR_C
#define MBEDTLS_GCM_C
#undef MBEDTLS_HAVEGE_C
#define MBEDTLS_HMAC_DRBG_C
#define MBEDTLS_MD_C
#undef MBEDTLS_MD2_C
#undef MBEDTLS_MD4_C
#define MBEDTLS_MD5_C
#undef MBEDTLS_MEMORY_BUFFER_ALLOC_C
#define MBEDTLS_NET_C
#define MBEDTLS_OID_C
#undef MBEDTLS_PADLOCK_C
#define MBEDTLS_PEM_PARSE_C
#define MBEDTLS_PEM_WRITE_C
#define MBEDTLS_PK_C
#define MBEDTLS_PK_PARSE_C
#define MBEDTLS_PK_WRITE_C
#define MBEDTLS_PKCS5_C
#undef MBEDTLS_PKCS11_C
#define MBEDTLS_PKCS12_C
#define MBEDTLS_PLATFORM_C
#define MBEDTLS_RIPEMD160_C
#define MBEDTLS_RSA_C
#define MBEDTLS_SHA1_C
#define MBEDTLS_SHA256_C
#define MBEDTLS_SHA512_C
#define MBEDTLS_SSL_CACHE_C
#define MBEDTLS_SSL_COOKIE_C
#define MBEDTLS_SSL_TICKET_C
#define MBEDTLS_SSL_CLI_C
#define MBEDTLS_SSL_SRV_C
#define MBEDTLS_SSL_TLS_C
#undef MBEDTLS_THREADING_C
#undef MBEDTLS_TIMING_C
#define MBEDTLS_VERSION_C
#define MBEDTLS_X509_USE_C
#define MBEDTLS_X509_CRT_PARSE_C
#define MBEDTLS_X509_CRL_PARSE_C
#define MBEDTLS_X509_CSR_PARSE_C
#define MBEDTLS_X509_CREATE_C
#define MBEDTLS_X509_CRT_WRITE_C
#define MBEDTLS_X509_CSR_WRITE_C
#define MBEDTLS_XTEA_C
#define MBEDTLS_MPI_WINDOW_SIZE 1 /**< Maximum windows size used. */
#define MBEDTLS_MPI_MAX_SIZE 512 /**< Maximum number of bytes for usable MPIs. */
//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by default (48 with SHA-512, 32 with SHA-256) */
#define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 1000 /**< Interval before reseed is performed by default */
//#define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
//#define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
//#define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 1000 /**< Interval before reseed is performed by default */
//#define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional input bytes */
//#define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested bytes per call */
//#define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed buffer */
//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */
#define MBEDTLS_ECP_WINDOW_SIZE 2 /**< Maximum window size used */
#define MBEDTLS_ECP_FIXED_POINT_OPTIM 0 /**< Enable fixed-point speed-up */
//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */
//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy sources */
//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */
//#define MBEDTLS_PLATFORM_STD_MEM_HDR <stdlib.h> /**< Header to include if MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */
//#define MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< Default fprintf to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_PRINTF printf /**< Default printf to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
//#define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< Seed file to read/write with default implementation */
//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< Default fprintf macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_PRINTF_MACRO printf /**< Default printf macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be undefined */
//#define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< Default nv_seed_read function to use, can be undefined */
//#define MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write function to use, can be undefined */
//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */
//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */
#define MBEDTLS_SSL_MAX_CONTENT_LEN 4096 /**< Maxium fragment length in bytes, determines the size of each of the two internal I/O buffers */
//#define MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */
//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes (default 256 bits) */
//#define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */
//#define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 3 /**< Maximum number of intermediate CAs in a verification chain. */
......@@ -26,6 +26,7 @@
//#define LUA_USE_MODULES_BME280
//#define LUA_USE_MODULES_CJSON
//#define LUA_USE_MODULES_COAP
//#define LUA_USE_MODULES_CRON
//#define LUA_USE_MODULES_CRYPTO
#define LUA_USE_MODULES_DHT
//#define LUA_USE_MODULES_ENCODER
......@@ -47,6 +48,7 @@
//#define LUA_USE_MODULES_PERF
//#define LUA_USE_MODULES_PWM
//#define LUA_USE_MODULES_RC
//#define LUA_USE_MODULES_RFSWITCH
//#define LUA_USE_MODULES_ROTARY
//#define LUA_USE_MODULES_RTCFIFO
//#define LUA_USE_MODULES_RTCMEM
......@@ -58,6 +60,7 @@
//#define LUA_USE_MODULES_STRUCT
//#define LUA_USE_MODULES_SWITEC
//#define LUA_USE_MODULES_TM1829
#define LUA_USE_MODULES_TLS
#define LUA_USE_MODULES_TMR
//#define LUA_USE_MODULES_TSL2561
//#define LUA_USE_MODULES_U8G
......@@ -65,6 +68,7 @@
//#define LUA_USE_MODULES_UCG
//#define LUA_USE_MODULES_WEBSOCKET
#define LUA_USE_MODULES_WIFI
//#define LUA_USE_MODULES_WPS
//#define LUA_USE_MODULES_WS2801
//#define LUA_USE_MODULES_WS2812
......
#ifndef __USER_VERSION_H__
#define __USER_VERSION_H__
#define NODE_VERSION_MAJOR 1U
#define NODE_VERSION_MINOR 5U
#define NODE_VERSION_REVISION 4U
#define NODE_VERSION_INTERNAL 1U
#define NODE_VERSION_MAJOR 2U
#define NODE_VERSION_MINOR 0U
#define NODE_VERSION_REVISION 0U
#define NODE_VERSION_INTERNAL 0U
#define NODE_VERSION "NodeMCU 1.5.4.1"
#define NODE_VERSION "NodeMCU 2.0.0"
#ifndef BUILD_DATE
#define BUILD_DATE "unspecified"
#endif
......
......@@ -144,7 +144,7 @@ reswitch: switch (ch = *fmt++) {
}
static void
kprintn(void (*put)(const char), unsigned long ul, int base, int width, char padchar)
kprintn(void (*put)(const char), uint32_t ul, int base, int width, char padchar)
{
/* hold a long in base 8 */
char *p, buf[(sizeof(long) * 8 / 3) + 2];
......
......@@ -412,6 +412,7 @@ LUA_API const void *lua_topointer (lua_State *L, int idx) {
case LUA_TLIGHTUSERDATA:
return lua_touserdata(L, idx);
case LUA_TROTABLE:
return rvalue(o);
case LUA_TLIGHTFUNCTION:
return pvalue(o);
default: return NULL;
......
......@@ -105,8 +105,9 @@ static Node *mainposition (const Table *t, const TValue *key) {
return hashstr(t, rawtsvalue(key));
case LUA_TBOOLEAN:
return hashboolean(t, bvalue(key));
case LUA_TLIGHTUSERDATA:
case LUA_TROTABLE:
return hashpointer(t, rvalue(key));
case LUA_TLIGHTUSERDATA:
case LUA_TLIGHTFUNCTION:
return hashpointer(t, pvalue(key));
default:
......
......@@ -292,8 +292,9 @@ int luaV_equalval (lua_State *L, const TValue *t1, const TValue *t2) {
case LUA_TNIL: return 1;
case LUA_TNUMBER: return luai_numeq(nvalue(t1), nvalue(t2));
case LUA_TBOOLEAN: return bvalue(t1) == bvalue(t2); /* true must be 1 !! */
case LUA_TLIGHTUSERDATA:
case LUA_TROTABLE:
return rvalue(t1) == rvalue(t2);
case LUA_TLIGHTUSERDATA:
case LUA_TLIGHTFUNCTION:
return pvalue(t1) == pvalue(t2);
case LUA_TUSERDATA: {
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment