- 24 Dec, 2017 2 commits
-
-
Marcel Stör authored
This reverts commit d8d7381a.
-
Pawel Jasinski authored
* host field in HTTP header is no longer limited to 31 charcters * added description for magic values
-
- 01 Jul, 2017 1 commit
-
-
Gregor Hartmann authored
* fix 2007 Call callback in all cases, call callback with errorcode -1 if no connection could be establioshed * change logging from ERR to DEBUG * make debug output more clear (hopefully) * add handling of errors to docs, note error handling on every call instead of only in the main documentation
-
- 04 Jan, 2017 1 commit
-
-
Yury Popov authored
-
- 07 Dec, 2016 1 commit
-
-
Marcel Stör authored
This reverts commit 04ce0adf.
-
- 01 Dec, 2016 2 commits
-
-
Philip Gladstone authored
* Fix up the HTTP module to use less memory
-
Marcel Stör authored
* add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
-
- 29 Oct, 2016 1 commit
-
-
Marcel Stör authored
* Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg
-
- 27 Oct, 2016 2 commits
-
-
Philip Gladstone authored
-
Philip Gladstone authored
-
- 04 Sep, 2016 1 commit
-
-
Yury Popov authored
Fixes #1457
-
- 13 Aug, 2016 1 commit
-
-
Luís Fonseca authored
Fixes #1366
-
- 11 Aug, 2016 1 commit
-
-
Marcel Stör authored
* Allow to override User-Agent and Host HTTP headers Fixes #1410 Idea borrowed from (unmerged) #1157 * Do not send port for host header for default ports
-
- 17 Jul, 2016 1 commit
-
-
Arnim Läuger authored
-
- 15 Jun, 2016 1 commit
-
-
Jonathan Karras authored
Some virtual hosts break if the port is added in the headers.
-
- 09 Apr, 2016 1 commit
-
-
Philip Gladstone authored
Fix failure to compile Move the check into the http module Reverted change
-
- 10 Mar, 2016 1 commit
-
-
philip authored
Squashed commit of the following: commit 4439b8c45192f6dee1222df78bbb59f74509e0ee Author: philip <philip@gladstonefamily.net> Date: Sun Mar 6 20:23:21 2016 -0500 Fix the ignore commit a07ee5acdf91286607c3e2dce128c9b8bfd7bd80 Author: philip <philip@gladstonefamily.net> Date: Sun Mar 6 20:20:41 2016 -0500 Remove uneeded stuff commit b3604ace92fc13b30161d385c354b0f1c5fe4046 Author: philip <philip@gladstonefamily.net> Date: Sun Mar 6 20:15:26 2016 -0500 Remove client cert auth commit 6e48c633569630736a986cd07a59a12de954391e Author: philip <philip@gladstonefamily.net> Date: Sun Mar 6 20:11:42 2016 -0500 More cleanup commit d40eade405ef071d0d1b60d038566b5b8f2cafa3 Author: philip <philip@gladstonefamily.net> Date: Sat Mar 5 10:56:56 2016 -0500 Move to almost working version commit 1860a2d90afa94461c53bd41251d4870d6527f9d Author: philip <philip@gladstonefamily.net> Date: Fri Mar 4 08:04:09 2016 -0500 Changed the naem to server-ca.crt commit e7a315660843273fe62943b7fe8ee6c0541dada2 Author: philip <philip@gladstonefamily.net> Date: Thu Mar 3 21:16:26 2016 -0500 Update gitignores commit 2b037d185c396209b64381399c40821c15e1840e Author: philip <philip@gladstonefamily.net> Date: Thu Mar 3 08:56:17 2016 -0500 Getting better commit 763255cffba8e279158cd7f43391a3573efdeca8 Author: philip <philip@gladstonefamily.net> Date: Wed Mar 2 22:28:21 2016 -0500 Works a bit better commit a38325d1a47dbad255cb3e681da8415e8cf699ea Author: philip <philip@gladstonefamily.net> Date: Wed Mar 2 09:11:04 2016 -0500 First building version commit 4aef13da33470ed954f2eaf5f7ac0ac3dcdf3774 Merge: 180e147 ebb0c333 Author: philip <philip@gladstonefamily.net> Date: Tue Mar 1 22:03:06 2016 -0500 Merge remote-tracking branch 'upstream/dev' into ssl-client commit 180e147c1abdcf4046ad9be9b3c1a48f4a875312 Author: philip <philip@gladstonefamily.net> Date: Sun Feb 28 21:34:21 2016 -0500 Missing files from espressif Try to imporve layout Align the file names with the contents Missing file Review comments More review coments
-
- 26 Jan, 2016 1 commit
-
-
Huang Rui authored
Signed-off-by:
Huang Rui <vowstar@gmail.com>
-
- 29 Dec, 2015 1 commit
-
-
Huang Rui authored
Add http module and documention, including fix httpclient bug.
-