/*
 * Copyright (c) 2009-2012, Salvatore Sanfilippo <antirez at gmail dot com>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 *   * Redistributions of source code must retain the above copyright notice,
 *     this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in the
 *     documentation and/or other materials provided with the distribution.
 *   * Neither the name of Redis nor the names of its contributors may be used
 *     to endorse or promote products derived from this software without
 *     specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#include "server.h"
#include "bio.h"
#include "rio.h"
#include "functions.h"

#include <signal.h>
#include <fcntl.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/resource.h>
#include <sys/wait.h>
#include <sys/param.h>

void freeClientArgv(client *c);
off_t getAppendOnlyFileSize(sds filename, int *status);
off_t getBaseAndIncrAppendOnlyFilesSize(aofManifest *am, int *status);
int getBaseAndIncrAppendOnlyFilesNum(aofManifest *am);
int aofFileExist(char *filename);
int rewriteAppendOnlyFile(char *filename);
aofManifest *aofLoadManifestFromFile(sds am_filepath);
void aofManifestFreeAndUpdate(aofManifest *am);
void aof_background_fsync_and_close(int fd);

/* ----------------------------------------------------------------------------
 * AOF Manifest file implementation.
 *
 * The following code implements the read/write logic of AOF manifest file, which
 * is used to track and manage all AOF files.
 *
 * Append-only files consist of three types:
 *
 * BASE: Represents a Redis snapshot from the time of last AOF rewrite. The manifest
 * file contains at most a single BASE file, which will always be the first file in the
 * list.
 *
 * INCR: Represents all write commands executed by Redis following the last successful
 * AOF rewrite. In some cases it is possible to have several ordered INCR files. For
 * example:
 *   - During an on-going AOF rewrite
 *   - After an AOF rewrite was aborted/failed, and before the next one succeeded.
 *
 * HISTORY: After a successful rewrite, the previous BASE and INCR become HISTORY files.
 * They will be automatically removed unless garbage collection is disabled.
 *
 * The following is a possible AOF manifest file content:
 *
 * file appendonly.aof.2.base.rdb seq 2 type b
 * file appendonly.aof.1.incr.aof seq 1 type h
 * file appendonly.aof.2.incr.aof seq 2 type h
 * file appendonly.aof.3.incr.aof seq 3 type h
 * file appendonly.aof.4.incr.aof seq 4 type i
 * file appendonly.aof.5.incr.aof seq 5 type i
 * ------------------------------------------------------------------------- */

/* Naming rules. */
#define BASE_FILE_SUFFIX           ".base"
#define INCR_FILE_SUFFIX           ".incr"
#define RDB_FORMAT_SUFFIX          ".rdb"
#define AOF_FORMAT_SUFFIX          ".aof"
#define MANIFEST_NAME_SUFFIX       ".manifest"
#define TEMP_FILE_NAME_PREFIX      "temp-"

/* AOF manifest key. */
#define AOF_MANIFEST_KEY_FILE_NAME   "file"
#define AOF_MANIFEST_KEY_FILE_SEQ    "seq"
#define AOF_MANIFEST_KEY_FILE_TYPE   "type"

/* Create an empty aofInfo. */
aofInfo *aofInfoCreate(void) {
    return zcalloc(sizeof(aofInfo));
}

/* Free the aofInfo structure (pointed to by ai) and its embedded file_name. */
void aofInfoFree(aofInfo *ai) {
    serverAssert(ai != NULL);
    if (ai->file_name) sdsfree(ai->file_name);
    zfree(ai);
}

/* Deep copy an aofInfo. */
aofInfo *aofInfoDup(aofInfo *orig) {
    serverAssert(orig != NULL);
    aofInfo *ai = aofInfoCreate();
    ai->file_name = sdsdup(orig->file_name);
    ai->file_seq = orig->file_seq;
    ai->file_type = orig->file_type;
    return ai;
}

/* Format aofInfo as a string and it will be a line in the manifest. */
sds aofInfoFormat(sds buf, aofInfo *ai) {
    sds filename_repr = NULL;

    if (sdsneedsrepr(ai->file_name))
        filename_repr = sdscatrepr(sdsempty(), ai->file_name, sdslen(ai->file_name));

    sds ret = sdscatprintf(buf, "%s %s %s %lld %s %c\n",
        AOF_MANIFEST_KEY_FILE_NAME, filename_repr ? filename_repr : ai->file_name,
        AOF_MANIFEST_KEY_FILE_SEQ, ai->file_seq,
        AOF_MANIFEST_KEY_FILE_TYPE, ai->file_type);
    sdsfree(filename_repr);

    return ret;
}

/* Method to free AOF list elements. */
void aofListFree(void *item) {
    aofInfo *ai = (aofInfo *)item;
    aofInfoFree(ai);
}

/* Method to duplicate AOF list elements. */
void *aofListDup(void *item) {
    return aofInfoDup(item);
}

/* Create an empty aofManifest, which will be called in `aofLoadManifestFromDisk`. */
aofManifest *aofManifestCreate(void) {
    aofManifest *am = zcalloc(sizeof(aofManifest));
    am->incr_aof_list = listCreate();
    am->history_aof_list = listCreate();
    listSetFreeMethod(am->incr_aof_list, aofListFree);
    listSetDupMethod(am->incr_aof_list, aofListDup);
    listSetFreeMethod(am->history_aof_list, aofListFree);
    listSetDupMethod(am->history_aof_list, aofListDup);
    return am;
}

/* Free the aofManifest structure (pointed to by am) and its embedded members. */
void aofManifestFree(aofManifest *am) {
    if (am->base_aof_info) aofInfoFree(am->base_aof_info);
    if (am->incr_aof_list) listRelease(am->incr_aof_list);
    if (am->history_aof_list) listRelease(am->history_aof_list);
    zfree(am);
}

sds getAofManifestFileName(void) {
    return sdscatprintf(sdsempty(), "%s%s", server.aof_filename,
                MANIFEST_NAME_SUFFIX);
}

sds getTempAofManifestFileName(void) {
    return sdscatprintf(sdsempty(), "%s%s%s", TEMP_FILE_NAME_PREFIX,
                server.aof_filename, MANIFEST_NAME_SUFFIX);
}

/* Returns the string representation of aofManifest pointed to by am.
 *
 * The string is multiple lines separated by '\n', and each line represents
 * an AOF file.
 *
 * Each line is space delimited and contains 6 fields, as follows:
 * "file" [filename] "seq" [sequence] "type" [type]
 *
 * Where "file", "seq" and "type" are keywords that describe the next value,
 * [filename] and [sequence] describe file name and order, and [type] is one
 * of 'b' (base), 'h' (history) or 'i' (incr).
 *
 * The base file, if exists, will always be first, followed by history files,
 * and incremental files.
 */
sds getAofManifestAsString(aofManifest *am) {
    serverAssert(am != NULL);

    sds buf = sdsempty();
    listNode *ln;
    listIter li;

    /* 1. Add BASE File information, it is always at the beginning
     * of the manifest file. */
    if (am->base_aof_info) {
        buf = aofInfoFormat(buf, am->base_aof_info);
    }

    /* 2. Add HISTORY type AOF information. */
    listRewind(am->history_aof_list, &li);
    while ((ln = listNext(&li)) != NULL) {
        aofInfo *ai = (aofInfo*)ln->value;
        buf = aofInfoFormat(buf, ai);
    }

    /* 3. Add INCR type AOF information. */
    listRewind(am->incr_aof_list, &li);
    while ((ln = listNext(&li)) != NULL) {
        aofInfo *ai = (aofInfo*)ln->value;
        buf = aofInfoFormat(buf, ai);
    }

    return buf;
}

/* Load the manifest information from the disk to `server.aof_manifest`
 * when the Redis server start.
 *
 * During loading, this function does strict error checking and will abort
 * the entire Redis server process on error (I/O error, invalid format, etc.)
 *
 * If the AOF directory or manifest file do not exist, this will be ignored
 * in order to support seamless upgrades from previous versions which did not
 * use them.
 */
void aofLoadManifestFromDisk(void) {
    server.aof_manifest = aofManifestCreate();
    if (!dirExists(server.aof_dirname)) {
        serverLog(LL_DEBUG, "The AOF directory %s doesn't exist", server.aof_dirname);
        return;
    }

    sds am_name = getAofManifestFileName();
    sds am_filepath = makePath(server.aof_dirname, am_name);
    if (!fileExist(am_filepath)) {
        serverLog(LL_DEBUG, "The AOF manifest file %s doesn't exist", am_name);
        sdsfree(am_name);
        sdsfree(am_filepath);
        return;
    }

    aofManifest *am = aofLoadManifestFromFile(am_filepath);
    if (am) aofManifestFreeAndUpdate(am);
    sdsfree(am_name);
    sdsfree(am_filepath);
}

/* Generic manifest loading function, used in `aofLoadManifestFromDisk` and redis-check-aof tool. */
#define MANIFEST_MAX_LINE 1024
aofManifest *aofLoadManifestFromFile(sds am_filepath) {
    const char *err = NULL;
    long long maxseq = 0;

    aofManifest *am = aofManifestCreate();
    FILE *fp = fopen(am_filepath, "r");
    if (fp == NULL) {
        serverLog(LL_WARNING, "Fatal error: can't open the AOF manifest "
            "file %s for reading: %s", am_filepath, strerror(errno));
        exit(1);
    }

    char buf[MANIFEST_MAX_LINE+1];
    sds *argv = NULL;
    int argc;
    aofInfo *ai = NULL;

    sds line = NULL;
    int linenum = 0;

    while (1) {
        if (fgets(buf, MANIFEST_MAX_LINE+1, fp) == NULL) {
            if (feof(fp)) {
                if (linenum == 0) {
                    err = "Found an empty AOF manifest";
                    goto loaderr;
                } else {
                    break;
                }
            } else {
                err = "Read AOF manifest failed";
                goto loaderr;
            }
        }

        linenum++;

        /* Skip comments lines */
        if (buf[0] == '#') continue;

        if (strchr(buf, '\n') == NULL) {
            err = "The AOF manifest file contains too long line";
            goto loaderr;
        }

        line = sdstrim(sdsnew(buf), " \t\r\n");
        if (!sdslen(line)) {
            err = "Invalid AOF manifest file format";
            goto loaderr;
        }

        argv = sdssplitargs(line, &argc);
        /* 'argc < 6' was done for forward compatibility. */
        if (argv == NULL || argc < 6 || (argc % 2)) {
            err = "Invalid AOF manifest file format";
            goto loaderr;
        }

        ai = aofInfoCreate();
        for (int i = 0; i < argc; i += 2) {
            if (!strcasecmp(argv[i], AOF_MANIFEST_KEY_FILE_NAME)) {
                ai->file_name = sdsnew(argv[i+1]);
                if (!pathIsBaseName(ai->file_name)) {
                    err = "File can't be a path, just a filename";
                    goto loaderr;
                }
            } else if (!strcasecmp(argv[i], AOF_MANIFEST_KEY_FILE_SEQ)) {
                ai->file_seq = atoll(argv[i+1]);
            } else if (!strcasecmp(argv[i], AOF_MANIFEST_KEY_FILE_TYPE)) {
                ai->file_type = (argv[i+1])[0];
            }
            /* else if (!strcasecmp(argv[i], AOF_MANIFEST_KEY_OTHER)) {} */
        }

        /* We have to make sure we load all the information. */
        if (!ai->file_name || !ai->file_seq || !ai->file_type) {
            err = "Invalid AOF manifest file format";
            goto loaderr;
        }

        sdsfreesplitres(argv, argc);
        argv = NULL;

        if (ai->file_type == AOF_FILE_TYPE_BASE) {
            if (am->base_aof_info) {
                err = "Found duplicate base file information";
                goto loaderr;
            }
            am->base_aof_info = ai;
            am->curr_base_file_seq = ai->file_seq;
        } else if (ai->file_type == AOF_FILE_TYPE_HIST) {
            listAddNodeTail(am->history_aof_list, ai);
        } else if (ai->file_type == AOF_FILE_TYPE_INCR) {
            if (ai->file_seq <= maxseq) {
                err = "Found a non-monotonic sequence number";
                goto loaderr;
            }
            listAddNodeTail(am->incr_aof_list, ai);
            am->curr_incr_file_seq = ai->file_seq;
            maxseq = ai->file_seq;
        } else {
            err = "Unknown AOF file type";
            goto loaderr;
        }

        sdsfree(line);
        line = NULL;
        ai = NULL;
    }

    fclose(fp);
    return am;

loaderr:
    /* Sanitizer suppression: may report a false positive if we goto loaderr
     * and exit(1) without freeing these allocations. */
    if (argv) sdsfreesplitres(argv, argc);
    if (ai) aofInfoFree(ai);

    serverLog(LL_WARNING, "\n*** FATAL AOF MANIFEST FILE ERROR ***\n");
    if (line) {
        serverLog(LL_WARNING, "Reading the manifest file, at line %d\n", linenum);
        serverLog(LL_WARNING, ">>> '%s'\n", line);
    }
    serverLog(LL_WARNING, "%s\n", err);
    exit(1);
}

/* Deep copy an aofManifest from orig.
 *
 * In `backgroundRewriteDoneHandler` and `openNewIncrAofForAppend`, we will
 * first deep copy a temporary AOF manifest from the `server.aof_manifest` and
 * try to modify it. Once everything is modified, we will atomically make the
 * `server.aof_manifest` point to this temporary aof_manifest.
 */
aofManifest *aofManifestDup(aofManifest *orig) {
    serverAssert(orig != NULL);
    aofManifest *am = zcalloc(sizeof(aofManifest));

    am->curr_base_file_seq = orig->curr_base_file_seq;
    am->curr_incr_file_seq = orig->curr_incr_file_seq;
    am->dirty = orig->dirty;

    if (orig->base_aof_info) {
        am->base_aof_info = aofInfoDup(orig->base_aof_info);
    }

    am->incr_aof_list = listDup(orig->incr_aof_list);
    am->history_aof_list = listDup(orig->history_aof_list);
    serverAssert(am->incr_aof_list != NULL);
    serverAssert(am->history_aof_list != NULL);
    return am;
}

/* Change the `server.aof_manifest` pointer to 'am' and free the previous
 * one if we have. */
void aofManifestFreeAndUpdate(aofManifest *am) {
    serverAssert(am != NULL);
    if (server.aof_manifest) aofManifestFree(server.aof_manifest);
    server.aof_manifest = am;
}

/* Called in `backgroundRewriteDoneHandler` to get a new BASE file
 * name, and mark the previous (if we have) BASE file as HISTORY type.
 *
 * BASE file naming rules: `server.aof_filename`.seq.base.format
 *
 * for example:
 *  appendonly.aof.1.base.aof  (server.aof_use_rdb_preamble is no)
 *  appendonly.aof.1.base.rdb  (server.aof_use_rdb_preamble is yes)
 */
sds getNewBaseFileNameAndMarkPreAsHistory(aofManifest *am) {
    serverAssert(am != NULL);
    if (am->base_aof_info) {
        serverAssert(am->base_aof_info->file_type == AOF_FILE_TYPE_BASE);
        am->base_aof_info->file_type = AOF_FILE_TYPE_HIST;
        listAddNodeHead(am->history_aof_list, am->base_aof_info);
    }

    char *format_suffix = server.aof_use_rdb_preamble ?
        RDB_FORMAT_SUFFIX:AOF_FORMAT_SUFFIX;

    aofInfo *ai = aofInfoCreate();
    ai->file_name = sdscatprintf(sdsempty(), "%s.%lld%s%s", server.aof_filename,
                        ++am->curr_base_file_seq, BASE_FILE_SUFFIX, format_suffix);
    ai->file_seq = am->curr_base_file_seq;
    ai->file_type = AOF_FILE_TYPE_BASE;
    am->base_aof_info = ai;
    am->dirty = 1;
    return am->base_aof_info->file_name;
}

/* Get a new INCR type AOF name.
 *
 * INCR AOF naming rules: `server.aof_filename`.seq.incr.aof
 *
 * for example:
 *  appendonly.aof.1.incr.aof
 */
sds getNewIncrAofName(aofManifest *am) {
    aofInfo *ai = aofInfoCreate();
    ai->file_type = AOF_FILE_TYPE_INCR;
    ai->file_name = sdscatprintf(sdsempty(), "%s.%lld%s%s", server.aof_filename,
                        ++am->curr_incr_file_seq, INCR_FILE_SUFFIX, AOF_FORMAT_SUFFIX);
    ai->file_seq = am->curr_incr_file_seq;
    listAddNodeTail(am->incr_aof_list, ai);
    am->dirty = 1;
    return ai->file_name;
}

/* Get temp INCR type AOF name. */
sds getTempIncrAofName(void) {
    return sdscatprintf(sdsempty(), "%s%s%s", TEMP_FILE_NAME_PREFIX, server.aof_filename,
        INCR_FILE_SUFFIX);
}

/* Get the last INCR AOF name or create a new one. */
sds getLastIncrAofName(aofManifest *am) {
    serverAssert(am != NULL);

    /* If 'incr_aof_list' is empty, just create a new one. */
    if (!listLength(am->incr_aof_list)) {
        return getNewIncrAofName(am);
    }

    /* Or return the last one. */
    listNode *lastnode = listIndex(am->incr_aof_list, -1);
    aofInfo *ai = listNodeValue(lastnode);
    return ai->file_name;
}

/* Called in `backgroundRewriteDoneHandler`. when AOFRW success, This
 * function will change the AOF file type in 'incr_aof_list' from
 * AOF_FILE_TYPE_INCR to AOF_FILE_TYPE_HIST, and move them to the
 * 'history_aof_list'.
 */
void markRewrittenIncrAofAsHistory(aofManifest *am) {
    serverAssert(am != NULL);
    if (!listLength(am->incr_aof_list)) {
        return;
    }

    listNode *ln;
    listIter li;

    listRewindTail(am->incr_aof_list, &li);

    /* "server.aof_fd != -1" means AOF enabled, then we must skip the
     * last AOF, because this file is our currently writing. */
    if (server.aof_fd != -1) {
        ln = listNext(&li);
        serverAssert(ln != NULL);
    }

    /* Move aofInfo from 'incr_aof_list' to 'history_aof_list'. */
    while ((ln = listNext(&li)) != NULL) {
        aofInfo *ai = (aofInfo*)ln->value;
        serverAssert(ai->file_type == AOF_FILE_TYPE_INCR);

        aofInfo *hai = aofInfoDup(ai);
        hai->file_type = AOF_FILE_TYPE_HIST;
        listAddNodeHead(am->history_aof_list, hai);
        listDelNode(am->incr_aof_list, ln);
    }

    am->dirty = 1;
}

/* Write the formatted manifest string to disk. */
int writeAofManifestFile(sds buf) {
    int ret = C_OK;
    ssize_t nwritten;
    int len;

    sds am_name = getAofManifestFileName();
    sds am_filepath = makePath(server.aof_dirname, am_name);
    sds tmp_am_name = getTempAofManifestFileName();
    sds tmp_am_filepath = makePath(server.aof_dirname, tmp_am_name);

    int fd = open(tmp_am_filepath, O_WRONLY|O_TRUNC|O_CREAT, 0644);
    if (fd == -1) {
        serverLog(LL_WARNING, "Can't open the AOF manifest file %s: %s",
            tmp_am_name, strerror(errno));

        ret = C_ERR;
        goto cleanup;
    }

    len = sdslen(buf);
    while(len) {
        nwritten = write(fd, buf, len);

        if (nwritten < 0) {
            if (errno == EINTR) continue;

            serverLog(LL_WARNING, "Error trying to write the temporary AOF manifest file %s: %s",
                tmp_am_name, strerror(errno));

            ret = C_ERR;
            goto cleanup;
        }

        len -= nwritten;
        buf += nwritten;
    }

    if (redis_fsync(fd) == -1) {
        serverLog(LL_WARNING, "Fail to fsync the temp AOF file %s: %s.",
            tmp_am_name, strerror(errno));

        ret = C_ERR;
        goto cleanup;
    }

    if (rename(tmp_am_filepath, am_filepath) != 0) {
        serverLog(LL_WARNING,
            "Error trying to rename the temporary AOF manifest file %s into %s: %s",
            tmp_am_name, am_name, strerror(errno));

        ret = C_ERR;
        goto cleanup;
    }

    /* Also sync the AOF directory as new AOF files may be added in the directory */
    if (fsyncFileDir(am_filepath) == -1) {
        serverLog(LL_WARNING, "Fail to fsync AOF directory %s: %s.",
            am_filepath, strerror(errno));

        ret = C_ERR;
        goto cleanup;
    }

cleanup:
    if (fd != -1) close(fd);
    sdsfree(am_name);
    sdsfree(am_filepath);
    sdsfree(tmp_am_name);
    sdsfree(tmp_am_filepath);
    return ret;
}

/* Persist the aofManifest information pointed to by am to disk. */
int persistAofManifest(aofManifest *am) {
    if (am->dirty == 0) {
        return C_OK;
    }

    sds amstr = getAofManifestAsString(am);
    int ret = writeAofManifestFile(amstr);
    sdsfree(amstr);
    if (ret == C_OK) am->dirty = 0;
    return ret;
}

/* Called in `loadAppendOnlyFiles` when we upgrade from a old version redis.
 *
 * 1) Create AOF directory use 'server.aof_dirname' as the name.
 * 2) Use 'server.aof_filename' to construct a BASE type aofInfo and add it to
 *    aofManifest, then persist the manifest file to AOF directory.
 * 3) Move the old AOF file (server.aof_filename) to AOF directory.
 *
 * If any of the above steps fails or crash occurs, this will not cause any
 * problems, and redis will retry the upgrade process when it restarts.
 */
void aofUpgradePrepare(aofManifest *am) {
    serverAssert(!aofFileExist(server.aof_filename));

    /* Create AOF directory use 'server.aof_dirname' as the name. */
    if (dirCreateIfMissing(server.aof_dirname) == -1) {
        serverLog(LL_WARNING, "Can't open or create append-only dir %s: %s",
            server.aof_dirname, strerror(errno));
        exit(1);
    }

    /* Manually construct a BASE type aofInfo and add it to aofManifest. */
    if (am->base_aof_info) aofInfoFree(am->base_aof_info);
    aofInfo *ai = aofInfoCreate();
    ai->file_name = sdsnew(server.aof_filename);
    ai->file_seq = 1;
    ai->file_type = AOF_FILE_TYPE_BASE;
    am->base_aof_info = ai;
    am->curr_base_file_seq = 1;
    am->dirty = 1;

    /* Persist the manifest file to AOF directory. */
    if (persistAofManifest(am) != C_OK) {
        exit(1);
    }

    /* Move the old AOF file to AOF directory. */
    sds aof_filepath = makePath(server.aof_dirname, server.aof_filename);
    if (rename(server.aof_filename, aof_filepath) == -1) {
        serverLog(LL_WARNING,
            "Error trying to move the old AOF file %s into dir %s: %s",
            server.aof_filename,
            server.aof_dirname,
            strerror(errno));
        sdsfree(aof_filepath);
        exit(1);
    }
    sdsfree(aof_filepath);

    serverLog(LL_NOTICE, "Successfully migrated an old-style AOF file (%s) into the AOF directory (%s).",
        server.aof_filename, server.aof_dirname);
}

/* When AOFRW success, the previous BASE and INCR AOFs will
 * become HISTORY type and be moved into 'history_aof_list'.
 *
 * The function will traverse the 'history_aof_list' and submit
 * the delete task to the bio thread.
 */
int aofDelHistoryFiles(void) {
    if (server.aof_manifest == NULL ||
        server.aof_disable_auto_gc == 1 ||
        !listLength(server.aof_manifest->history_aof_list))
    {
        return C_OK;
    }

    listNode *ln;
    listIter li;

    listRewind(server.aof_manifest->history_aof_list, &li);
    while ((ln = listNext(&li)) != NULL) {
        aofInfo *ai = (aofInfo*)ln->value;
        serverAssert(ai->file_type == AOF_FILE_TYPE_HIST);
        serverLog(LL_NOTICE, "Removing the history file %s in the background", ai->file_name);
        sds aof_filepath = makePath(server.aof_dirname, ai->file_name);
        bg_unlink(aof_filepath);
        sdsfree(aof_filepath);
        listDelNode(server.aof_manifest->history_aof_list, ln);
    }

    server.aof_manifest->dirty = 1;
    return persistAofManifest(server.aof_manifest);
}

/* Used to clean up temp INCR AOF when AOFRW fails. */
void aofDelTempIncrAofFile(void) {
    sds aof_filename = getTempIncrAofName();
    sds aof_filepath = makePath(server.aof_dirname, aof_filename);
    serverLog(LL_NOTICE, "Removing the temp incr aof file %s in the background", aof_filename);
    bg_unlink(aof_filepath);
    sdsfree(aof_filepath);
    sdsfree(aof_filename);
    return;
}

/* Called after `loadDataFromDisk` when redis start. If `server.aof_state` is
 * 'AOF_ON', It will do three things:
 * 1. Force create a BASE file when redis starts with an empty dataset
 * 2. Open the last opened INCR type AOF for writing, If not, create a new one
 * 3. Synchronously update the manifest file to the disk
 *
 * If any of the above steps fails, the redis process will exit.
 */
void aofOpenIfNeededOnServerStart(void) {
    if (server.aof_state != AOF_ON) {
        return;
    }

    serverAssert(server.aof_manifest != NULL);
    serverAssert(server.aof_fd == -1);

    if (dirCreateIfMissing(server.aof_dirname) == -1) {
        serverLog(LL_WARNING, "Can't open or create append-only dir %s: %s",
            server.aof_dirname, strerror(errno));
        exit(1);
    }

    /* If we start with an empty dataset, we will force create a BASE file. */
    size_t incr_aof_len = listLength(server.aof_manifest->incr_aof_list);
    if (!server.aof_manifest->base_aof_info && !incr_aof_len) {
        sds base_name = getNewBaseFileNameAndMarkPreAsHistory(server.aof_manifest);
        sds base_filepath = makePath(server.aof_dirname, base_name);
        if (rewriteAppendOnlyFile(base_filepath) != C_OK) {
            exit(1);
        }
        sdsfree(base_filepath);
        serverLog(LL_NOTICE, "Creating AOF base file %s on server start",
            base_name);
    }

    /* Because we will 'exit(1)' if open AOF or persistent manifest fails, so
     * we don't need atomic modification here. */
    sds aof_name = getLastIncrAofName(server.aof_manifest);

    /* Here we should use 'O_APPEND' flag. */
    sds aof_filepath = makePath(server.aof_dirname, aof_name);
    server.aof_fd = open(aof_filepath, O_WRONLY|O_APPEND|O_CREAT, 0644);
    sdsfree(aof_filepath);
    if (server.aof_fd == -1) {
        serverLog(LL_WARNING, "Can't open the append-only file %s: %s",
            aof_name, strerror(errno));
        exit(1);
    }

    /* Persist our changes. */
    int ret = persistAofManifest(server.aof_manifest);
    if (ret != C_OK) {
        exit(1);
    }

    server.aof_last_incr_size = getAppendOnlyFileSize(aof_name, NULL);
    server.aof_last_incr_fsync_offset = server.aof_last_incr_size;

    if (incr_aof_len) {
        serverLog(LL_NOTICE, "Opening AOF incr file %s on server start", aof_name);
    } else {
        serverLog(LL_NOTICE, "Creating AOF incr file %s on server start", aof_name);
    }
}

int aofFileExist(char *filename) {
    sds file_path = makePath(server.aof_dirname, filename);
    int ret = fileExist(file_path);
    sdsfree(file_path);
    return ret;
}

/* Called in `rewriteAppendOnlyFileBackground`. If `server.aof_state`
 * is 'AOF_ON', It will do two things:
 * 1. Open a new INCR type AOF for writing
 * 2. Synchronously update the manifest file to the disk
 *
 * The above two steps of modification are atomic, that is, if
 * any step fails, the entire operation will rollback and returns
 * C_ERR, and if all succeeds, it returns C_OK.
 * 
 * If `server.aof_state` is 'AOF_WAIT_REWRITE', It will open a temporary INCR AOF 
 * file to accumulate data during AOF_WAIT_REWRITE, and it will eventually be 
 * renamed in the `backgroundRewriteDoneHandler` and written to the manifest file.
 * */
int openNewIncrAofForAppend(void) {
    serverAssert(server.aof_manifest != NULL);
    int newfd = -1;
    aofManifest *temp_am = NULL;
    sds new_aof_name = NULL;

    /* Only open new INCR AOF when AOF enabled. */
    if (server.aof_state == AOF_OFF) return C_OK;

    /* Open new AOF. */
    if (server.aof_state == AOF_WAIT_REWRITE) {
        /* Use a temporary INCR AOF file to accumulate data during AOF_WAIT_REWRITE. */
        new_aof_name = getTempIncrAofName();
    } else {
        /* Dup a temp aof_manifest to modify. */
        temp_am = aofManifestDup(server.aof_manifest);
        new_aof_name = sdsdup(getNewIncrAofName(temp_am));
    }
    sds new_aof_filepath = makePath(server.aof_dirname, new_aof_name);
    newfd = open(new_aof_filepath, O_WRONLY|O_TRUNC|O_CREAT, 0644);
    sdsfree(new_aof_filepath);
    if (newfd == -1) {
        serverLog(LL_WARNING, "Can't open the append-only file %s: %s",
            new_aof_name, strerror(errno));
        goto cleanup;
    }

    if (temp_am) {
        /* Persist AOF Manifest. */
        if (persistAofManifest(temp_am) == C_ERR) {
            goto cleanup;
        }
    }

    serverLog(LL_NOTICE, "Creating AOF incr file %s on background rewrite",
            new_aof_name);
    sdsfree(new_aof_name);

    /* If reaches here, we can safely modify the `server.aof_manifest`
     * and `server.aof_fd`. */

    /* fsync and close old aof_fd if needed. In fsync everysec it's ok to delay
     * the fsync as long as we grantee it happens, and in fsync always the file
     * is already synced at this point so fsync doesn't matter. */
    if (server.aof_fd != -1) {
        aof_background_fsync_and_close(server.aof_fd);
        server.aof_last_fsync = server.unixtime;
    }
    server.aof_fd = newfd;

    /* Reset the aof_last_incr_size. */
    server.aof_last_incr_size = 0;
    /* Reset the aof_last_incr_fsync_offset. */
    server.aof_last_incr_fsync_offset = 0;
    /* Update `server.aof_manifest`. */
    if (temp_am) aofManifestFreeAndUpdate(temp_am);
    return C_OK;

cleanup:
    if (new_aof_name) sdsfree(new_aof_name);
    if (newfd != -1) close(newfd);
    if (temp_am) aofManifestFree(temp_am);
    return C_ERR;
}

/* Whether to limit the execution of Background AOF rewrite.
 *
 * At present, if AOFRW fails, redis will automatically retry. If it continues
 * to fail, we may get a lot of very small INCR files. so we need an AOFRW
 * limiting measure.
 *
 * We can't directly use `server.aof_current_size` and `server.aof_last_incr_size`,
 * because there may be no new writes after AOFRW fails.
 *
 * So, we use time delay to achieve our goal. When AOFRW fails, we delay the execution
 * of the next AOFRW by 1 minute. If the next AOFRW also fails, it will be delayed by 2
 * minutes. The next is 4, 8, 16, the maximum delay is 60 minutes (1 hour).
 *
 * During the limit period, we can still use the 'bgrewriteaof' command to execute AOFRW
 * immediately.
 *
 * Return 1 means that AOFRW is limited and cannot be executed. 0 means that we can execute
 * AOFRW, which may be that we have reached the 'next_rewrite_time' or the number of INCR
 * AOFs has not reached the limit threshold.
 * */
#define AOF_REWRITE_LIMITE_THRESHOLD    3
#define AOF_REWRITE_LIMITE_MAX_MINUTES  60 /* 1 hour */
int aofRewriteLimited(void) {
    static int next_delay_minutes = 0;
    static time_t next_rewrite_time = 0;

    if (server.stat_aofrw_consecutive_failures < AOF_REWRITE_LIMITE_THRESHOLD) {
        /* We may be recovering from limited state, so reset all states. */
        next_delay_minutes = 0;
        next_rewrite_time = 0;
        return 0;
    }

    /* if it is in the limiting state, then check if the next_rewrite_time is reached */
    if (next_rewrite_time != 0) {
        if (server.unixtime < next_rewrite_time) {
            return 1;
        } else {
            next_rewrite_time = 0;
            return 0;
        }
    }

    next_delay_minutes = (next_delay_minutes == 0) ? 1 : (next_delay_minutes * 2);
    if (next_delay_minutes > AOF_REWRITE_LIMITE_MAX_MINUTES) {
        next_delay_minutes = AOF_REWRITE_LIMITE_MAX_MINUTES;
    }

    next_rewrite_time = server.unixtime + next_delay_minutes * 60;
    serverLog(LL_WARNING,
        "Background AOF rewrite has repeatedly failed and triggered the limit, will retry in %d minutes", next_delay_minutes);
    return 1;
}

/* ----------------------------------------------------------------------------
 * AOF file implementation
 * ------------------------------------------------------------------------- */

/* Return true if an AOf fsync is currently already in progress in a
 * BIO thread. */
int aofFsyncInProgress(void) {
    /* Note that we don't care about aof_background_fsync_and_close because
     * server.aof_fd has been replaced by the new INCR AOF file fd,
     * see openNewIncrAofForAppend. */
    return bioPendingJobsOfType(BIO_AOF_FSYNC) != 0;
}

/* Starts a background task that performs fsync() against the specified
 * file descriptor (the one of the AOF file) in another thread. */
void aof_background_fsync(int fd) {
    bioCreateFsyncJob(fd, server.master_repl_offset, 1);
}

/* Close the fd on the basis of aof_background_fsync. */
void aof_background_fsync_and_close(int fd) {
    bioCreateCloseAofJob(fd, server.master_repl_offset, 1);
}

/* Kills an AOFRW child process if exists */
void killAppendOnlyChild(void) {
    int statloc;
    /* No AOFRW child? return. */
    if (server.child_type != CHILD_TYPE_AOF) return;
    /* Kill AOFRW child, wait for child exit. */
    serverLog(LL_NOTICE,"Killing running AOF rewrite child: %ld",
        (long) server.child_pid);
    if (kill(server.child_pid,SIGUSR1) != -1) {
        while(waitpid(-1, &statloc, 0) != server.child_pid);
    }
    aofRemoveTempFile(server.child_pid);
    resetChildState();
    server.aof_rewrite_time_start = -1;
}

/* Called when the user switches from "appendonly yes" to "appendonly no"
 * at runtime using the CONFIG command. */
void stopAppendOnly(void) {
    serverAssert(server.aof_state != AOF_OFF);
    flushAppendOnlyFile(1);
    if (redis_fsync(server.aof_fd) == -1) {
        serverLog(LL_WARNING,"Fail to fsync the AOF file: %s",strerror(errno));
    } else {
        server.aof_last_fsync = server.unixtime;
    }
    close(server.aof_fd);

    server.aof_fd = -1;
    server.aof_selected_db = -1;
    server.aof_state = AOF_OFF;
    server.aof_rewrite_scheduled = 0;
    server.aof_last_incr_size = 0;
    server.aof_last_incr_fsync_offset = 0;
    server.fsynced_reploff = -1;
    atomicSet(server.fsynced_reploff_pending, 0);
    killAppendOnlyChild();
    sdsfree(server.aof_buf);
    server.aof_buf = sdsempty();
}

/* Called when the user switches from "appendonly no" to "appendonly yes"
 * at runtime using the CONFIG command. */
int startAppendOnly(void) {
    serverAssert(server.aof_state == AOF_OFF);

    server.aof_state = AOF_WAIT_REWRITE;
    if (hasActiveChildProcess() && server.child_type != CHILD_TYPE_AOF) {
        server.aof_rewrite_scheduled = 1;
        serverLog(LL_NOTICE,"AOF was enabled but there is already another background operation. An AOF background was scheduled to start when possible.");
    } else if (server.in_exec){
        server.aof_rewrite_scheduled = 1;
        serverLog(LL_NOTICE,"AOF was enabled during a transaction. An AOF background was scheduled to start when possible.");
    } else {
        /* If there is a pending AOF rewrite, we need to switch it off and
         * start a new one: the old one cannot be reused because it is not
         * accumulating the AOF buffer. */
        if (server.child_type == CHILD_TYPE_AOF) {
            serverLog(LL_NOTICE,"AOF was enabled but there is already an AOF rewriting in background. Stopping background AOF and starting a rewrite now.");
            killAppendOnlyChild();
        }

        if (rewriteAppendOnlyFileBackground() == C_ERR) {
            server.aof_state = AOF_OFF;
            serverLog(LL_WARNING,"Redis needs to enable the AOF but can't trigger a background AOF rewrite operation. Check the above logs for more info about the error.");
            return C_ERR;
        }
    }
    server.aof_last_fsync = server.unixtime;
    /* If AOF fsync error in bio job, we just ignore it and log the event. */
    int aof_bio_fsync_status;
    atomicGet(server.aof_bio_fsync_status, aof_bio_fsync_status);
    if (aof_bio_fsync_status == C_ERR) {
        serverLog(LL_WARNING,
            "AOF reopen, just ignore the AOF fsync error in bio job");
        atomicSet(server.aof_bio_fsync_status,C_OK);
    }

    /* If AOF was in error state, we just ignore it and log the event. */
    if (server.aof_last_write_status == C_ERR) {
        serverLog(LL_WARNING,"AOF reopen, just ignore the last error.");
        server.aof_last_write_status = C_OK;
    }
    return C_OK;
}

/* This is a wrapper to the write syscall in order to retry on short writes
 * or if the syscall gets interrupted. It could look strange that we retry
 * on short writes given that we are writing to a block device: normally if
 * the first call is short, there is a end-of-space condition, so the next
 * is likely to fail. However apparently in modern systems this is no longer
 * true, and in general it looks just more resilient to retry the write. If
 * there is an actual error condition we'll get it at the next try. */
ssize_t aofWrite(int fd, const char *buf, size_t len) {
    ssize_t nwritten = 0, totwritten = 0;

    while(len) {
        nwritten = write(fd, buf, len);

        if (nwritten < 0) {
            if (errno == EINTR) continue;
            return totwritten ? totwritten : -1;
        }

        len -= nwritten;
        buf += nwritten;
        totwritten += nwritten;
    }

    return totwritten;
}

/* Write the append only file buffer on disk.
 *
 * Since we are required to write the AOF before replying to the client,
 * and the only way the client socket can get a write is entering when
 * the event loop, we accumulate all the AOF writes in a memory
 * buffer and write it on disk using this function just before entering
 * the event loop again.
 *
 * About the 'force' argument:
 *
 * When the fsync policy is set to 'everysec' we may delay the flush if there
 * is still an fsync() going on in the background thread, since for instance
 * on Linux write(2) will be blocked by the background fsync anyway.
 * When this happens we remember that there is some aof buffer to be
 * flushed ASAP, and will try to do that in the serverCron() function.
 *
 * However if force is set to 1 we'll write regardless of the background
 * fsync. */
#define AOF_WRITE_LOG_ERROR_RATE 30 /* Seconds between errors logging. */
void flushAppendOnlyFile(int force) {
    ssize_t nwritten;
    int sync_in_progress = 0;
    mstime_t latency;

    if (sdslen(server.aof_buf) == 0) {
        /* Check if we need to do fsync even the aof buffer is empty,
         * because previously in AOF_FSYNC_EVERYSEC mode, fsync is
         * called only when aof buffer is not empty, so if users
         * stop write commands before fsync called in one second,
         * the data in page cache cannot be flushed in time. */
        if (server.aof_fsync == AOF_FSYNC_EVERYSEC &&
            server.aof_last_incr_fsync_offset != server.aof_last_incr_size &&
            server.unixtime > server.aof_last_fsync &&
            !(sync_in_progress = aofFsyncInProgress())) {
            goto try_fsync;

        /* Check if we need to do fsync even the aof buffer is empty,
         * the reason is described in the previous AOF_FSYNC_EVERYSEC block,
         * and AOF_FSYNC_ALWAYS is also checked here to handle a case where
         * aof_fsync is changed from everysec to always. */
        } else if (server.aof_fsync == AOF_FSYNC_ALWAYS &&
                   server.aof_last_incr_fsync_offset != server.aof_last_incr_size)
        {
            goto try_fsync;
        } else {
            /* All data is fsync'd already: Update fsynced_reploff_pending just in case.
             * This is needed to avoid a WAITAOF hang in case a module used RM_Call with the NO_AOF flag,
             * in which case master_repl_offset will increase but fsynced_reploff_pending won't be updated
             * (because there's no reason, from the AOF POV, to call fsync) and then WAITAOF may wait on
             * the higher offset (which contains data that was only propagated to replicas, and not to AOF) */
            if (!sync_in_progress && server.aof_fsync != AOF_FSYNC_NO)
                atomicSet(server.fsynced_reploff_pending, server.master_repl_offset);
            return;
        }
    }

    if (server.aof_fsync == AOF_FSYNC_EVERYSEC)
        sync_in_progress = aofFsyncInProgress();

    if (server.aof_fsync == AOF_FSYNC_EVERYSEC && !force) {
        /* With this append fsync policy we do background fsyncing.
         * If the fsync is still in progress we can try to delay
         * the write for a couple of seconds. */
        if (sync_in_progress) {
            if (server.aof_flush_postponed_start == 0) {
                /* No previous write postponing, remember that we are
                 * postponing the flush and return. */
                server.aof_flush_postponed_start = server.unixtime;
                return;
            } else if (server.unixtime - server.aof_flush_postponed_start < 2) {
                /* We were already waiting for fsync to finish, but for less
                 * than two seconds this is still ok. Postpone again. */
                return;
            }
            /* Otherwise fall through, and go write since we can't wait
             * over two seconds. */
            server.aof_delayed_fsync++;
            serverLog(LL_NOTICE,"Asynchronous AOF fsync is taking too long (disk is busy?). Writing the AOF buffer without waiting for fsync to complete, this may slow down Redis.");
        }
    }
    /* We want to perform a single write. This should be guaranteed atomic
     * at least if the filesystem we are writing is a real physical one.
     * While this will save us against the server being killed I don't think
     * there is much to do about the whole server stopping for power problems
     * or alike */

    if (server.aof_flush_sleep && sdslen(server.aof_buf)) {
        usleep(server.aof_flush_sleep);
    }

    latencyStartMonitor(latency);
    nwritten = aofWrite(server.aof_fd,server.aof_buf,sdslen(server.aof_buf));
    latencyEndMonitor(latency);
    /* We want to capture different events for delayed writes:
     * when the delay happens with a pending fsync, or with a saving child
     * active, and when the above two conditions are missing.
     * We also use an additional event name to save all samples which is
     * useful for graphing / monitoring purposes. */
    if (sync_in_progress) {
        latencyAddSampleIfNeeded("aof-write-pending-fsync",latency);
    } else if (hasActiveChildProcess()) {
        latencyAddSampleIfNeeded("aof-write-active-child",latency);
    } else {
        latencyAddSampleIfNeeded("aof-write-alone",latency);
    }
    latencyAddSampleIfNeeded("aof-write",latency);

    /* We performed the write so reset the postponed flush sentinel to zero. */
    server.aof_flush_postponed_start = 0;

    if (nwritten != (ssize_t)sdslen(server.aof_buf)) {
        static time_t last_write_error_log = 0;
        int can_log = 0;

        /* Limit logging rate to 1 line per AOF_WRITE_LOG_ERROR_RATE seconds. */
        if ((server.unixtime - last_write_error_log) > AOF_WRITE_LOG_ERROR_RATE) {
            can_log = 1;
            last_write_error_log = server.unixtime;
        }

        /* Log the AOF write error and record the error code. */
        if (nwritten == -1) {
            if (can_log) {
                serverLog(LL_WARNING,"Error writing to the AOF file: %s",
                    strerror(errno));
            }
            server.aof_last_write_errno = errno;
        } else {
            if (can_log) {
                serverLog(LL_WARNING,"Short write while writing to "
                                       "the AOF file: (nwritten=%lld, "
                                       "expected=%lld)",
                                       (long long)nwritten,
                                       (long long)sdslen(server.aof_buf));
            }

            if (ftruncate(server.aof_fd, server.aof_last_incr_size) == -1) {
                if (can_log) {
                    serverLog(LL_WARNING, "Could not remove short write "
                             "from the append-only file.  Redis may refuse "
                             "to load the AOF the next time it starts.  "
                             "ftruncate: %s", strerror(errno));
                }
            } else {
                /* If the ftruncate() succeeded we can set nwritten to
                 * -1 since there is no longer partial data into the AOF. */
                nwritten = -1;
            }
            server.aof_last_write_errno = ENOSPC;
        }

        /* Handle the AOF write error. */
        if (server.aof_fsync == AOF_FSYNC_ALWAYS) {
            /* We can't recover when the fsync policy is ALWAYS since the reply
             * for the client is already in the output buffers (both writes and
             * reads), and the changes to the db can't be rolled back. Since we
             * have a contract with the user that on acknowledged or observed
             * writes are is synced on disk, we must exit. */
            serverLog(LL_WARNING,"Can't recover from AOF write error when the AOF fsync policy is 'always'. Exiting...");
            exit(1);
        } else {
            /* Recover from failed write leaving data into the buffer. However
             * set an error to stop accepting writes as long as the error
             * condition is not cleared. */
            server.aof_last_write_status = C_ERR;

            /* Trim the sds buffer if there was a partial write, and there
             * was no way to undo it with ftruncate(2). */
            if (nwritten > 0) {
                server.aof_current_size += nwritten;
                server.aof_last_incr_size += nwritten;
                sdsrange(server.aof_buf,nwritten,-1);
            }
            return; /* We'll try again on the next call... */
        }
    } else {
        /* Successful write(2). If AOF was in error state, restore the
         * OK state and log the event. */
        if (server.aof_last_write_status == C_ERR) {
            serverLog(LL_NOTICE,
                "AOF write error looks solved, Redis can write again.");
            server.aof_last_write_status = C_OK;
        }
    }
    server.aof_current_size += nwritten;
    server.aof_last_incr_size += nwritten;

    /* Re-use AOF buffer when it is small enough. The maximum comes from the
     * arena size of 4k minus some overhead (but is otherwise arbitrary). */
    if ((sdslen(server.aof_buf)+sdsavail(server.aof_buf)) < 4000) {
        sdsclear(server.aof_buf);
    } else {
        sdsfree(server.aof_buf);
        server.aof_buf = sdsempty();
    }

try_fsync:
    /* Don't fsync if no-appendfsync-on-rewrite is set to yes and there are
     * children doing I/O in the background. */
    if (server.aof_no_fsync_on_rewrite && hasActiveChildProcess())
        return;

    /* Perform the fsync if needed. */
    if (server.aof_fsync == AOF_FSYNC_ALWAYS) {
        /* redis_fsync is defined as fdatasync() for Linux in order to avoid
         * flushing metadata. */
        latencyStartMonitor(latency);
        /* Let's try to get this data on the disk. To guarantee data safe when
         * the AOF fsync policy is 'always', we should exit if failed to fsync
         * AOF (see comment next to the exit(1) after write error above). */
        if (redis_fsync(server.aof_fd) == -1) {
            serverLog(LL_WARNING,"Can't persist AOF for fsync error when the "
              "AOF fsync policy is 'always': %s. Exiting...", strerror(errno));
            exit(1);
        }
        latencyEndMonitor(latency);
        latencyAddSampleIfNeeded("aof-fsync-always",latency);
        server.aof_last_incr_fsync_offset = server.aof_last_incr_size;
        server.aof_last_fsync = server.unixtime;
        atomicSet(server.fsynced_reploff_pending, server.master_repl_offset);
    } else if (server.aof_fsync == AOF_FSYNC_EVERYSEC &&
               server.unixtime > server.aof_last_fsync) {
        if (!sync_in_progress) {
            aof_background_fsync(server.aof_fd);
            server.aof_last_incr_fsync_offset = server.aof_last_incr_size;
        }
        server.aof_last_fsync = server.unixtime;
    }
}

sds catAppendOnlyGenericCommand(sds dst, int argc, robj **argv) {
    char buf[32];
    int len, j;
    robj *o;

    buf[0] = '*';
    len = 1+ll2string(buf+1,sizeof(buf)-1,argc);
    buf[len++] = '\r';
    buf[len++] = '\n';
    dst = sdscatlen(dst,buf,len);

    for (j = 0; j < argc; j++) {
        o = getDecodedObject(argv[j]);
        buf[0] = '$';
        len = 1+ll2string(buf+1,sizeof(buf)-1,sdslen(o->ptr));
        buf[len++] = '\r';
        buf[len++] = '\n';
        dst = sdscatlen(dst,buf,len);
        dst = sdscatlen(dst,o->ptr,sdslen(o->ptr));
        dst = sdscatlen(dst,"\r\n",2);
        decrRefCount(o);
    }
    return dst;
}

/* Generate a piece of timestamp annotation for AOF if current record timestamp
 * in AOF is not equal server unix time. If we specify 'force' argument to 1,
 * we would generate one without check, currently, it is useful in AOF rewriting
 * child process which always needs to record one timestamp at the beginning of
 * rewriting AOF.
 *
 * Timestamp annotation format is "#TS:${timestamp}\r\n". "TS" is short of
 * timestamp and this method could save extra bytes in AOF. */
sds genAofTimestampAnnotationIfNeeded(int force) {
    sds ts = NULL;

    if (force || server.aof_cur_timestamp < server.unixtime) {
        server.aof_cur_timestamp = force ? time(NULL) : server.unixtime;
        ts = sdscatfmt(sdsempty(), "#TS:%I\r\n", server.aof_cur_timestamp);
        serverAssert(sdslen(ts) <= AOF_ANNOTATION_LINE_MAX_LEN);
    }
    return ts;
}

/* Write the given command to the aof file.
 * dictid - dictionary id the command should be applied to,
 *          this is used in order to decide if a `select` command
 *          should also be written to the aof. Value of -1 means
 *          to avoid writing `select` command in any case.
 * argv   - The command to write to the aof.
 * argc   - Number of values in argv
 */
void feedAppendOnlyFile(int dictid, robj **argv, int argc) {
    sds buf = sdsempty();

    serverAssert(dictid == -1 || (dictid >= 0 && dictid < server.dbnum));

    /* Feed timestamp if needed */
    if (server.aof_timestamp_enabled) {
        sds ts = genAofTimestampAnnotationIfNeeded(0);
        if (ts != NULL) {
            buf = sdscatsds(buf, ts);
            sdsfree(ts);
        }
    }

    /* The DB this command was targeting is not the same as the last command
     * we appended. To issue a SELECT command is needed. */
    if (dictid != -1 && dictid != server.aof_selected_db) {
        char seldb[64];

        snprintf(seldb,sizeof(seldb),"%d",dictid);
        buf = sdscatprintf(buf,"*2\r\n$6\r\nSELECT\r\n$%lu\r\n%s\r\n",
            (unsigned long)strlen(seldb),seldb);
        server.aof_selected_db = dictid;
    }

    /* All commands should be propagated the same way in AOF as in replication.
     * No need for AOF-specific translation. */
    buf = catAppendOnlyGenericCommand(buf,argc,argv);

    /* Append to the AOF buffer. This will be flushed on disk just before
     * of re-entering the event loop, so before the client will get a
     * positive reply about the operation performed. */
    if (server.aof_state == AOF_ON ||
        (server.aof_state == AOF_WAIT_REWRITE && server.child_type == CHILD_TYPE_AOF))
    {
        server.aof_buf = sdscatlen(server.aof_buf, buf, sdslen(buf));
    }

    sdsfree(buf);
}

/* ----------------------------------------------------------------------------
 * AOF loading
 * ------------------------------------------------------------------------- */

/* In Redis commands are always executed in the context of a client, so in
 * order to load the append only file we need to create a fake client. */
struct client *createAOFClient(void) {
    struct client *c = createClient(NULL);

    c->id = CLIENT_ID_AOF; /* So modules can identify it's the AOF client. */

    /*
     * The AOF client should never be blocked (unlike master
     * replication connection).
     * This is because blocking the AOF client might cause
     * deadlock (because potentially no one will unblock it).
     * Also, if the AOF client will be blocked just for
     * background processing there is a chance that the
     * command execution order will be violated.
     */
    c->flags = CLIENT_DENY_BLOCKING;

    /* We set the fake client as a slave waiting for the synchronization
     * so that Redis will not try to send replies to this client. */
    c->replstate = SLAVE_STATE_WAIT_BGSAVE_START;
    return c;
}

/* Replay an append log file. On success AOF_OK or AOF_TRUNCATED is returned,
 * otherwise, one of the following is returned:
 * AOF_OPEN_ERR: Failed to open the AOF file.
 * AOF_NOT_EXIST: AOF file doesn't exist.
 * AOF_EMPTY: The AOF file is empty (nothing to load).
 * AOF_FAILED: Failed to load the AOF file. */
int loadSingleAppendOnlyFile(char *filename) {
    struct client *fakeClient;
    struct redis_stat sb;
    int old_aof_state = server.aof_state;
    long loops = 0;
    off_t valid_up_to = 0; /* Offset of latest well-formed command loaded. */
    off_t valid_before_multi = 0; /* Offset before MULTI command loaded. */
    off_t last_progress_report_size = 0;
    int ret = AOF_OK;

    sds aof_filepath = makePath(server.aof_dirname, filename);
    FILE *fp = fopen(aof_filepath, "r");
    if (fp == NULL) {
        int en = errno;
        if (redis_stat(aof_filepath, &sb) == 0 || errno != ENOENT) {
            serverLog(LL_WARNING,"Fatal error: can't open the append log file %s for reading: %s", filename, strerror(en));
            sdsfree(aof_filepath);
            return AOF_OPEN_ERR;
        } else {
            serverLog(LL_WARNING,"The append log file %s doesn't exist: %s", filename, strerror(errno));
            sdsfree(aof_filepath);
            return AOF_NOT_EXIST;
        }
    }

    if (fp && redis_fstat(fileno(fp),&sb) != -1 && sb.st_size == 0) {
        fclose(fp);
        sdsfree(aof_filepath);
        return AOF_EMPTY;
    }

    /* Temporarily disable AOF, to prevent EXEC from feeding a MULTI
     * to the same file we're about to read. */
    server.aof_state = AOF_OFF;

    client *old_cur_client = server.current_client;
    client *old_exec_client = server.executing_client;
    fakeClient = createAOFClient();
    server.current_client = server.executing_client = fakeClient;

    /* Check if the AOF file is in RDB format (it may be RDB encoded base AOF
     * or old style RDB-preamble AOF). In that case we need to load the RDB file 
     * and later continue loading the AOF tail if it is an old style RDB-preamble AOF. */
    char sig[5]; /* "REDIS" */
    if (fread(sig,1,5,fp) != 5 || memcmp(sig,"REDIS",5) != 0) {
        /* Not in RDB format, seek back at 0 offset. */
        if (fseek(fp,0,SEEK_SET) == -1) goto readerr;
    } else {
        /* RDB format. Pass loading the RDB functions. */
        rio rdb;
        int old_style = !strcmp(filename, server.aof_filename);
        if (old_style)
            serverLog(LL_NOTICE, "Reading RDB preamble from AOF file...");
        else 
            serverLog(LL_NOTICE, "Reading RDB base file on AOF loading..."); 

        if (fseek(fp,0,SEEK_SET) == -1) goto readerr;
        rioInitWithFile(&rdb,fp);
        if (rdbLoadRio(&rdb,RDBFLAGS_AOF_PREAMBLE,NULL) != C_OK) {
            if (old_style)
                serverLog(LL_WARNING, "Error reading the RDB preamble of the AOF file %s, AOF loading aborted", filename);
            else
                serverLog(LL_WARNING, "Error reading the RDB base file %s, AOF loading aborted", filename);

            ret = AOF_FAILED;
            goto cleanup;
        } else {
            loadingAbsProgress(ftello(fp));
            last_progress_report_size = ftello(fp);
            if (old_style) serverLog(LL_NOTICE, "Reading the remaining AOF tail...");
        }
    }

    /* Read the actual AOF file, in REPL format, command by command. */
    while(1) {
        int argc, j;
        unsigned long len;
        robj **argv;
        char buf[AOF_ANNOTATION_LINE_MAX_LEN];
        sds argsds;
        struct redisCommand *cmd;

        /* Serve the clients from time to time */
        if (!(loops++ % 1024)) {
            off_t progress_delta = ftello(fp) - last_progress_report_size;
            loadingIncrProgress(progress_delta);
            last_progress_report_size += progress_delta;
            processEventsWhileBlocked();
            processModuleLoadingProgressEvent(1);
        }
        if (fgets(buf,sizeof(buf),fp) == NULL) {
            if (feof(fp)) {
                break;
            } else {
                goto readerr;
            }
        }
        if (buf[0] == '#') continue; /* Skip annotations */
        if (buf[0] != '*') goto fmterr;
        if (buf[1] == '\0') goto readerr;
        argc = atoi(buf+1);
        if (argc < 1) goto fmterr;
        if ((size_t)argc > SIZE_MAX / sizeof(robj*)) goto fmterr;

        /* Load the next command in the AOF as our fake client
         * argv. */
        argv = zmalloc(sizeof(robj*)*argc);
        fakeClient->argc = argc;
        fakeClient->argv = argv;
        fakeClient->argv_len = argc;

        for (j = 0; j < argc; j++) {
            /* Parse the argument len. */
            char *readres = fgets(buf,sizeof(buf),fp);
            if (readres == NULL || buf[0] != '$') {
                fakeClient->argc = j; /* Free up to j-1. */
                freeClientArgv(fakeClient);
                if (readres == NULL)
                    goto readerr;
                else
                    goto fmterr;
            }
            len = strtol(buf+1,NULL,10);

            /* Read it into a string object. */
            argsds = sdsnewlen(SDS_NOINIT,len);
            if (len && fread(argsds,len,1,fp) == 0) {
                sdsfree(argsds);
                fakeClient->argc = j; /* Free up to j-1. */
                freeClientArgv(fakeClient);
                goto readerr;
            }
            argv[j] = createObject(OBJ_STRING,argsds);

            /* Discard CRLF. */
            if (fread(buf,2,1,fp) == 0) {
                fakeClient->argc = j+1; /* Free up to j. */
                freeClientArgv(fakeClient);
                goto readerr;
            }
        }

        /* Command lookup */
        cmd = lookupCommand(argv,argc);
        if (!cmd) {
            serverLog(LL_WARNING,
                "Unknown command '%s' reading the append only file %s",
                (char*)argv[0]->ptr, filename);
            freeClientArgv(fakeClient);
            ret = AOF_FAILED;
            goto cleanup;
        }

        if (cmd->proc == multiCommand) valid_before_multi = valid_up_to;

        /* Run the command in the context of a fake client */
        fakeClient->cmd = fakeClient->lastcmd = cmd;
        if (fakeClient->flags & CLIENT_MULTI &&
            fakeClient->cmd->proc != execCommand)
        {
            /* Note: we don't have to attempt calling evalGetCommandFlags,
             * since this is AOF, the checks in processCommand are not made
             * anyway.*/
            queueMultiCommand(fakeClient, cmd->flags);
        } else {
            cmd->proc(fakeClient);
        }

        /* The fake client should not have a reply */
        serverAssert(fakeClient->bufpos == 0 &&
                     listLength(fakeClient->reply) == 0);

        /* The fake client should never get blocked */
        serverAssert((fakeClient->flags & CLIENT_BLOCKED) == 0);

        /* Clean up. Command code may have changed argv/argc so we use the
         * argv/argc of the client instead of the local variables. */
        freeClientArgv(fakeClient);
        if (server.aof_load_truncated) valid_up_to = ftello(fp);
        if (server.key_load_delay)
            debugDelay(server.key_load_delay);
    }

    /* This point can only be reached when EOF is reached without errors.
     * If the client is in the middle of a MULTI/EXEC, handle it as it was
     * a short read, even if technically the protocol is correct: we want
     * to remove the unprocessed tail and continue. */
    if (fakeClient->flags & CLIENT_MULTI) {
        serverLog(LL_WARNING,
            "Revert incomplete MULTI/EXEC transaction in AOF file %s", filename);
        valid_up_to = valid_before_multi;
        goto uxeof;
    }

loaded_ok: /* DB loaded, cleanup and return success (AOF_OK or AOF_TRUNCATED). */
    loadingIncrProgress(ftello(fp) - last_progress_report_size);
    server.aof_state = old_aof_state;
    goto cleanup;

readerr: /* Read error. If feof(fp) is true, fall through to unexpected EOF. */
    if (!feof(fp)) {
        serverLog(LL_WARNING,"Unrecoverable error reading the append only file %s: %s", filename, strerror(errno));
        ret = AOF_FAILED;
        goto cleanup;
    }

uxeof: /* Unexpected AOF end of file. */
    if (server.aof_load_truncated) {
        serverLog(LL_WARNING,"!!! Warning: short read while loading the AOF file %s!!!", filename);
        serverLog(LL_WARNING,"!!! Truncating the AOF %s at offset %llu !!!",
            filename, (unsigned long long) valid_up_to);
        if (valid_up_to == -1 || truncate(aof_filepath,valid_up_to) == -1) {
            if (valid_up_to == -1) {
                serverLog(LL_WARNING,"Last valid command offset is invalid");
            } else {
                serverLog(LL_WARNING,"Error truncating the AOF file %s: %s",
                    filename, strerror(errno));
            }
        } else {
            /* Make sure the AOF file descriptor points to the end of the
             * file after the truncate call. */
            if (server.aof_fd != -1 && lseek(server.aof_fd,0,SEEK_END) == -1) {
                serverLog(LL_WARNING,"Can't seek the end of the AOF file %s: %s",
                    filename, strerror(errno));
            } else {
                serverLog(LL_WARNING,
                    "AOF %s loaded anyway because aof-load-truncated is enabled", filename);
                ret = AOF_TRUNCATED;
                goto loaded_ok;
            }
        }
    }
    serverLog(LL_WARNING, "Unexpected end of file reading the append only file %s. You can: "
        "1) Make a backup of your AOF file, then use ./redis-check-aof --fix <filename.manifest>. "
        "2) Alternatively you can set the 'aof-load-truncated' configuration option to yes and restart the server.", filename);
    ret = AOF_FAILED;
    goto cleanup;

fmterr: /* Format error. */
    serverLog(LL_WARNING, "Bad file format reading the append only file %s: "
        "make a backup of your AOF file, then use ./redis-check-aof --fix <filename.manifest>", filename);
    ret = AOF_FAILED;
    /* fall through to cleanup. */

cleanup:
    if (fakeClient) freeClient(fakeClient);
    server.current_client = old_cur_client;
    server.executing_client = old_exec_client;
    fclose(fp);
    sdsfree(aof_filepath);
    return ret;
}

/* Load the AOF files according the aofManifest pointed by am. */
int loadAppendOnlyFiles(aofManifest *am) {
    serverAssert(am != NULL);
    int status, ret = AOF_OK;
    long long start;
    off_t total_size = 0, base_size = 0;
    sds aof_name;
    int total_num, aof_num = 0, last_file;

    /* If the 'server.aof_filename' file exists in dir, we may be starting
     * from an old redis version. We will use enter upgrade mode in three situations.
     *
     * 1. If the 'server.aof_dirname' directory not exist
     * 2. If the 'server.aof_dirname' directory exists but the manifest file is missing
     * 3. If the 'server.aof_dirname' directory exists and the manifest file it contains
     *    has only one base AOF record, and the file name of this base AOF is 'server.aof_filename',
     *    and the 'server.aof_filename' file not exist in 'server.aof_dirname' directory
     * */
    if (fileExist(server.aof_filename)) {
        if (!dirExists(server.aof_dirname) ||
            (am->base_aof_info == NULL && listLength(am->incr_aof_list) == 0) ||
            (am->base_aof_info != NULL && listLength(am->incr_aof_list) == 0 &&
             !strcmp(am->base_aof_info->file_name, server.aof_filename) && !aofFileExist(server.aof_filename)))
        {
            aofUpgradePrepare(am);
        }
    }

    if (am->base_aof_info == NULL && listLength(am->incr_aof_list) == 0) {
        return AOF_NOT_EXIST;
    }

    total_num = getBaseAndIncrAppendOnlyFilesNum(am);
    serverAssert(total_num > 0);

    /* Here we calculate the total size of all BASE and INCR files in
     * advance, it will be set to `server.loading_total_bytes`. */
    total_size = getBaseAndIncrAppendOnlyFilesSize(am, &status);
    if (status != AOF_OK) {
        /* If an AOF exists in the manifest but not on the disk, we consider this to be a fatal error. */
        if (status == AOF_NOT_EXIST) status = AOF_FAILED;

        return status;
    } else if (total_size == 0) {
        return AOF_EMPTY;
    }

    startLoading(total_size, RDBFLAGS_AOF_PREAMBLE, 0);

    /* Load BASE AOF if needed. */
    if (am->base_aof_info) {
        serverAssert(am->base_aof_info->file_type == AOF_FILE_TYPE_BASE);
        aof_name = (char*)am->base_aof_info->file_name;
        updateLoadingFileName(aof_name);
        base_size = getAppendOnlyFileSize(aof_name, NULL);
        last_file = ++aof_num == total_num;
        start = ustime();
        ret = loadSingleAppendOnlyFile(aof_name);
        if (ret == AOF_OK || (ret == AOF_TRUNCATED && last_file)) {
            serverLog(LL_NOTICE, "DB loaded from base file %s: %.3f seconds",
                aof_name, (float)(ustime()-start)/1000000);
        }

        /* If the truncated file is not the last file, we consider this to be a fatal error. */
        if (ret == AOF_TRUNCATED && !last_file) {
            ret = AOF_FAILED;
            serverLog(LL_WARNING, "Fatal error: the truncated file is not the last file");
        }

        if (ret == AOF_OPEN_ERR || ret == AOF_FAILED) {
            goto cleanup;
        }
    }

    /* Load INCR AOFs if needed. */
    if (listLength(am->incr_aof_list)) {
        listNode *ln;
        listIter li;

        listRewind(am->incr_aof_list, &li);
        while ((ln = listNext(&li)) != NULL) {
            aofInfo *ai = (aofInfo*)ln->value;
            serverAssert(ai->file_type == AOF_FILE_TYPE_INCR);
            aof_name = (char*)ai->file_name;
            updateLoadingFileName(aof_name);
            last_file = ++aof_num == total_num;
            start = ustime();
            ret = loadSingleAppendOnlyFile(aof_name);
            if (ret == AOF_OK || (ret == AOF_TRUNCATED && last_file)) {
                serverLog(LL_NOTICE, "DB loaded from incr file %s: %.3f seconds",
                    aof_name, (float)(ustime()-start)/1000000);
            }

            /* We know that (at least) one of the AOF files has data (total_size > 0),
             * so empty incr AOF file doesn't count as a AOF_EMPTY result */
            if (ret == AOF_EMPTY) ret = AOF_OK;

            /* If the truncated file is not the last file, we consider this to be a fatal error. */
            if (ret == AOF_TRUNCATED && !last_file) {
                ret = AOF_FAILED;
                serverLog(LL_WARNING, "Fatal error: the truncated file is not the last file");
            }

            if (ret == AOF_OPEN_ERR || ret == AOF_FAILED) {
                goto cleanup;
            }
        }
    }

    server.aof_current_size = total_size;
    /* Ideally, the aof_rewrite_base_size variable should hold the size of the
     * AOF when the last rewrite ended, this should include the size of the
     * incremental file that was created during the rewrite since otherwise we
     * risk the next automatic rewrite to happen too soon (or immediately if
     * auto-aof-rewrite-percentage is low). However, since we do not persist
     * aof_rewrite_base_size information anywhere, we initialize it on restart
     * to the size of BASE AOF file. This might cause the first AOFRW to be
     * executed early, but that shouldn't be a problem since everything will be
     * fine after the first AOFRW. */
    server.aof_rewrite_base_size = base_size;

cleanup:
    stopLoading(ret == AOF_OK || ret == AOF_TRUNCATED);
    return ret;
}

/* ----------------------------------------------------------------------------
 * AOF rewrite
 * ------------------------------------------------------------------------- */

/* Delegate writing an object to writing a bulk string or bulk long long.
 * This is not placed in rio.c since that adds the server.h dependency. */
int rioWriteBulkObject(rio *r, robj *obj) {
    /* Avoid using getDecodedObject to help copy-on-write (we are often
     * in a child process when this function is called). */
    if (obj->encoding == OBJ_ENCODING_INT) {
        return rioWriteBulkLongLong(r,(long)obj->ptr);
    } else if (sdsEncodedObject(obj)) {
        return rioWriteBulkString(r,obj->ptr,sdslen(obj->ptr));
    } else {
        serverPanic("Unknown string encoding");
    }
}

/* Emit the commands needed to rebuild a list object.
 * The function returns 0 on error, 1 on success. */
int rewriteListObject(rio *r, robj *key, robj *o) {
    long long count = 0, items = listTypeLength(o);

    listTypeIterator *li = listTypeInitIterator(o,0,LIST_TAIL);
    listTypeEntry entry;
    while (listTypeNext(li,&entry)) {
        if (count == 0) {
            int cmd_items = (items > AOF_REWRITE_ITEMS_PER_CMD) ?
                AOF_REWRITE_ITEMS_PER_CMD : items;
            if (!rioWriteBulkCount(r,'*',2+cmd_items) ||
                !rioWriteBulkString(r,"RPUSH",5) ||
                !rioWriteBulkObject(r,key)) 
            {
                listTypeReleaseIterator(li);
                return 0;
            }
        }

        unsigned char *vstr;
        size_t vlen;
        long long lval;
        vstr = listTypeGetValue(&entry,&vlen,&lval);
        if (vstr) {
            if (!rioWriteBulkString(r,(char*)vstr,vlen)) {
                listTypeReleaseIterator(li);
                return 0;
            }
        } else {
            if (!rioWriteBulkLongLong(r,lval)) {
                listTypeReleaseIterator(li);
                return 0;
            }
        }
        if (++count == AOF_REWRITE_ITEMS_PER_CMD) count = 0;
        items--;
    }
    listTypeReleaseIterator(li);
    return 1;
}

/* Emit the commands needed to rebuild a set object.
 * The function returns 0 on error, 1 on success. */
int rewriteSetObject(rio *r, robj *key, robj *o) {
    long long count = 0, items = setTypeSize(o);
    setTypeIterator *si = setTypeInitIterator(o);
    char *str;
    size_t len;
    int64_t llval;
    while (setTypeNext(si, &str, &len, &llval) != -1) {
        if (count == 0) {
            int cmd_items = (items > AOF_REWRITE_ITEMS_PER_CMD) ?
                AOF_REWRITE_ITEMS_PER_CMD : items;
            if (!rioWriteBulkCount(r,'*',2+cmd_items) ||
                !rioWriteBulkString(r,"SADD",4) ||
                !rioWriteBulkObject(r,key))
            {
                return 0;
            }
        }
        size_t written = str ?
            rioWriteBulkString(r, str, len) : rioWriteBulkLongLong(r, llval);
        if (!written) {
            setTypeReleaseIterator(si);
            return 0;
        }
        if (++count == AOF_REWRITE_ITEMS_PER_CMD) count = 0;
        items--;
    }
    setTypeReleaseIterator(si);
    return 1;
}

/* Emit the commands needed to rebuild a sorted set object.
 * The function returns 0 on error, 1 on success. */
int rewriteSortedSetObject(rio *r, robj *key, robj *o) {
    long long count = 0, items = zsetLength(o);

    if (o->encoding == OBJ_ENCODING_LISTPACK) {
        unsigned char *zl = o->ptr;
        unsigned char *eptr, *sptr;
        unsigned char *vstr;
        unsigned int vlen;
        long long vll;
        double score;

        eptr = lpSeek(zl,0);
        serverAssert(eptr != NULL);
        sptr = lpNext(zl,eptr);
        serverAssert(sptr != NULL);

        while (eptr != NULL) {
            vstr = lpGetValue(eptr,&vlen,&vll);
            score = zzlGetScore(sptr);

            if (count == 0) {
                int cmd_items = (items > AOF_REWRITE_ITEMS_PER_CMD) ?
                    AOF_REWRITE_ITEMS_PER_CMD : items;

                if (!rioWriteBulkCount(r,'*',2+cmd_items*2) ||
                    !rioWriteBulkString(r,"ZADD",4) ||
                    !rioWriteBulkObject(r,key)) 
                {
                    return 0;
                }
            }
            if (!rioWriteBulkDouble(r,score)) return 0;
            if (vstr != NULL) {
                if (!rioWriteBulkString(r,(char*)vstr,vlen)) return 0;
            } else {
                if (!rioWriteBulkLongLong(r,vll)) return 0;
            }
            zzlNext(zl,&eptr,&sptr);
            if (++count == AOF_REWRITE_ITEMS_PER_CMD) count = 0;
            items--;
        }
    } else if (o->encoding == OBJ_ENCODING_SKIPLIST) {
        zset *zs = o->ptr;
        dictIterator *di = dictGetIterator(zs->dict);
        dictEntry *de;

        while((de = dictNext(di)) != NULL) {
            sds ele = dictGetKey(de);
            double *score = dictGetVal(de);

            if (count == 0) {
                int cmd_items = (items > AOF_REWRITE_ITEMS_PER_CMD) ?
                    AOF_REWRITE_ITEMS_PER_CMD : items;

                if (!rioWriteBulkCount(r,'*',2+cmd_items*2) ||
                    !rioWriteBulkString(r,"ZADD",4) ||
                    !rioWriteBulkObject(r,key)) 
                {
                    dictReleaseIterator(di);
                    return 0;
                }
            }
            if (!rioWriteBulkDouble(r,*score) ||
                !rioWriteBulkString(r,ele,sdslen(ele)))
            {
                dictReleaseIterator(di);
                return 0;
            }
            if (++count == AOF_REWRITE_ITEMS_PER_CMD) count = 0;
            items--;
        }
        dictReleaseIterator(di);
    } else {
        serverPanic("Unknown sorted zset encoding");
    }
    return 1;
}

/* Write either the key or the value of the currently selected item of a hash.
 * The 'hi' argument passes a valid Redis hash iterator.
 * The 'what' filed specifies if to write a key or a value and can be
 * either OBJ_HASH_KEY or OBJ_HASH_VALUE.
 *
 * The function returns 0 on error, non-zero on success. */
static int rioWriteHashIteratorCursor(rio *r, hashTypeIterator *hi, int what) {
    if (hi->encoding == OBJ_ENCODING_LISTPACK) {
        unsigned char *vstr = NULL;
        unsigned int vlen = UINT_MAX;
        long long vll = LLONG_MAX;

        hashTypeCurrentFromListpack(hi, what, &vstr, &vlen, &vll);
        if (vstr)
            return rioWriteBulkString(r, (char*)vstr, vlen);
        else
            return rioWriteBulkLongLong(r, vll);
    } else if (hi->encoding == OBJ_ENCODING_HT) {
        sds value = hashTypeCurrentFromHashTable(hi, what);
        return rioWriteBulkString(r, value, sdslen(value));
    }

    serverPanic("Unknown hash encoding");
    return 0;
}

/* Emit the commands needed to rebuild a hash object.
 * The function returns 0 on error, 1 on success. */
int rewriteHashObject(rio *r, robj *key, robj *o) {
    hashTypeIterator *hi;
    long long count = 0, items = hashTypeLength(o);

    hi = hashTypeInitIterator(o);
    while (hashTypeNext(hi) != C_ERR) {
        if (count == 0) {
            int cmd_items = (items > AOF_REWRITE_ITEMS_PER_CMD) ?
                AOF_REWRITE_ITEMS_PER_CMD : items;

            if (!rioWriteBulkCount(r,'*',2+cmd_items*2) ||
                !rioWriteBulkString(r,"HMSET",5) ||
                !rioWriteBulkObject(r,key)) 
            {
                hashTypeReleaseIterator(hi);
                return 0;
            }
        }

        if (!rioWriteHashIteratorCursor(r, hi, OBJ_HASH_KEY) ||
            !rioWriteHashIteratorCursor(r, hi, OBJ_HASH_VALUE))
        {
            hashTypeReleaseIterator(hi);
            return 0;           
        }
        if (++count == AOF_REWRITE_ITEMS_PER_CMD) count = 0;
        items--;
    }

    hashTypeReleaseIterator(hi);

    return 1;
}

/* Helper for rewriteStreamObject() that generates a bulk string into the
 * AOF representing the ID 'id'. */
int rioWriteBulkStreamID(rio *r,streamID *id) {
    int retval;

    sds replyid = sdscatfmt(sdsempty(),"%U-%U",id->ms,id->seq);
    retval = rioWriteBulkString(r,replyid,sdslen(replyid));
    sdsfree(replyid);
    return retval;
}

/* Helper for rewriteStreamObject(): emit the XCLAIM needed in order to
 * add the message described by 'nack' having the id 'rawid', into the pending
 * list of the specified consumer. All this in the context of the specified
 * key and group. */
int rioWriteStreamPendingEntry(rio *r, robj *key, const char *groupname, size_t groupname_len, streamConsumer *consumer, unsigned char *rawid, streamNACK *nack) {
     /* XCLAIM <key> <group> <consumer> 0 <id> TIME <milliseconds-unix-time>
               RETRYCOUNT <count> JUSTID FORCE. */
    streamID id;
    streamDecodeID(rawid,&id);
    if (rioWriteBulkCount(r,'*',12) == 0) return 0;
    if (rioWriteBulkString(r,"XCLAIM",6) == 0) return 0;
    if (rioWriteBulkObject(r,key) == 0) return 0;
    if (rioWriteBulkString(r,groupname,groupname_len) == 0) return 0;
    if (rioWriteBulkString(r,consumer->name,sdslen(consumer->name)) == 0) return 0;
    if (rioWriteBulkString(r,"0",1) == 0) return 0;
    if (rioWriteBulkStreamID(r,&id) == 0) return 0;
    if (rioWriteBulkString(r,"TIME",4) == 0) return 0;
    if (rioWriteBulkLongLong(r,nack->delivery_time) == 0) return 0;
    if (rioWriteBulkString(r,"RETRYCOUNT",10) == 0) return 0;
    if (rioWriteBulkLongLong(r,nack->delivery_count) == 0) return 0;
    if (rioWriteBulkString(r,"JUSTID",6) == 0) return 0;
    if (rioWriteBulkString(r,"FORCE",5) == 0) return 0;
    return 1;
}

/* Helper for rewriteStreamObject(): emit the XGROUP CREATECONSUMER is
 * needed in order to create consumers that do not have any pending entries.
 * All this in the context of the specified key and group. */
int rioWriteStreamEmptyConsumer(rio *r, robj *key, const char *groupname, size_t groupname_len, streamConsumer *consumer) {
    /* XGROUP CREATECONSUMER <key> <group> <consumer> */
    if (rioWriteBulkCount(r,'*',5) == 0) return 0;
    if (rioWriteBulkString(r,"XGROUP",6) == 0) return 0;
    if (rioWriteBulkString(r,"CREATECONSUMER",14) == 0) return 0;
    if (rioWriteBulkObject(r,key) == 0) return 0;
    if (rioWriteBulkString(r,groupname,groupname_len) == 0) return 0;
    if (rioWriteBulkString(r,consumer->name,sdslen(consumer->name)) == 0) return 0;
    return 1;
}

/* Emit the commands needed to rebuild a stream object.
 * The function returns 0 on error, 1 on success. */
int rewriteStreamObject(rio *r, robj *key, robj *o) {
    stream *s = o->ptr;
    streamIterator si;
    streamIteratorStart(&si,s,NULL,NULL,0);
    streamID id;
    int64_t numfields;

    if (s->length) {
        /* Reconstruct the stream data using XADD commands. */
        while(streamIteratorGetID(&si,&id,&numfields)) {
            /* Emit a two elements array for each item. The first is
             * the ID, the second is an array of field-value pairs. */

            /* Emit the XADD <key> <id> ...fields... command. */
            if (!rioWriteBulkCount(r,'*',3+numfields*2) || 
                !rioWriteBulkString(r,"XADD",4) ||
                !rioWriteBulkObject(r,key) ||
                !rioWriteBulkStreamID(r,&id)) 
            {
                streamIteratorStop(&si);
                return 0;
            }
            while(numfields--) {
                unsigned char *field, *value;
                int64_t field_len, value_len;
                streamIteratorGetField(&si,&field,&value,&field_len,&value_len);
                if (!rioWriteBulkString(r,(char*)field,field_len) ||
                    !rioWriteBulkString(r,(char*)value,value_len)) 
                {
                    streamIteratorStop(&si);
                    return 0;                  
                }
            }
        }
    } else {
        /* Use the XADD MAXLEN 0 trick to generate an empty stream if
         * the key we are serializing is an empty string, which is possible
         * for the Stream type. */
        id.ms = 0; id.seq = 1; 
        if (!rioWriteBulkCount(r,'*',7) ||
            !rioWriteBulkString(r,"XADD",4) ||
            !rioWriteBulkObject(r,key) ||
            !rioWriteBulkString(r,"MAXLEN",6) ||
            !rioWriteBulkString(r,"0",1) ||
            !rioWriteBulkStreamID(r,&id) ||
            !rioWriteBulkString(r,"x",1) ||
            !rioWriteBulkString(r,"y",1))
        {
            streamIteratorStop(&si);
            return 0;     
        }
    }

    /* Append XSETID after XADD, make sure lastid is correct,
     * in case of XDEL lastid. */
    if (!rioWriteBulkCount(r,'*',7) ||
        !rioWriteBulkString(r,"XSETID",6) ||
        !rioWriteBulkObject(r,key) ||
        !rioWriteBulkStreamID(r,&s->last_id) ||
        !rioWriteBulkString(r,"ENTRIESADDED",12) ||
        !rioWriteBulkLongLong(r,s->entries_added) ||
        !rioWriteBulkString(r,"MAXDELETEDID",12) ||
        !rioWriteBulkStreamID(r,&s->max_deleted_entry_id)) 
    {
        streamIteratorStop(&si);
        return 0; 
    }


    /* Create all the stream consumer groups. */
    if (s->cgroups) {
        raxIterator ri;
        raxStart(&ri,s->cgroups);
        raxSeek(&ri,"^",NULL,0);
        while(raxNext(&ri)) {
            streamCG *group = ri.data;
            /* Emit the XGROUP CREATE in order to create the group. */
            if (!rioWriteBulkCount(r,'*',7) ||
                !rioWriteBulkString(r,"XGROUP",6) ||
                !rioWriteBulkString(r,"CREATE",6) ||
                !rioWriteBulkObject(r,key) ||
                !rioWriteBulkString(r,(char*)ri.key,ri.key_len) ||
                !rioWriteBulkStreamID(r,&group->last_id) ||
                !rioWriteBulkString(r,"ENTRIESREAD",11) ||
                !rioWriteBulkLongLong(r,group->entries_read))
            {
                raxStop(&ri);
                streamIteratorStop(&si);
                return 0;
            }

            /* Generate XCLAIMs for each consumer that happens to
             * have pending entries. Empty consumers would be generated with
             * XGROUP CREATECONSUMER. */
            raxIterator ri_cons;
            raxStart(&ri_cons,group->consumers);
            raxSeek(&ri_cons,"^",NULL,0);
            while(raxNext(&ri_cons)) {
                streamConsumer *consumer = ri_cons.data;
                /* If there are no pending entries, just emit XGROUP CREATECONSUMER */
                if (raxSize(consumer->pel) == 0) {
                    if (rioWriteStreamEmptyConsumer(r,key,(char*)ri.key,
                                                    ri.key_len,consumer) == 0)
                    {
                        raxStop(&ri_cons);
                        raxStop(&ri);
                        streamIteratorStop(&si);
                        return 0;
                    }
                    continue;
                }
                /* For the current consumer, iterate all the PEL entries
                 * to emit the XCLAIM protocol. */
                raxIterator ri_pel;
                raxStart(&ri_pel,consumer->pel);
                raxSeek(&ri_pel,"^",NULL,0);
                while(raxNext(&ri_pel)) {
                    streamNACK *nack = ri_pel.data;
                    if (rioWriteStreamPendingEntry(r,key,(char*)ri.key,
                                                   ri.key_len,consumer,
                                                   ri_pel.key,nack) == 0)
                    {
                        raxStop(&ri_pel);
                        raxStop(&ri_cons);
                        raxStop(&ri);
                        streamIteratorStop(&si);
                        return 0;
                    }
                }
                raxStop(&ri_pel);
            }
            raxStop(&ri_cons);
        }
        raxStop(&ri);
    }

    streamIteratorStop(&si);
    return 1;
}

/* Call the module type callback in order to rewrite a data type
 * that is exported by a module and is not handled by Redis itself.
 * The function returns 0 on error, 1 on success. */
int rewriteModuleObject(rio *r, robj *key, robj *o, int dbid) {
    RedisModuleIO io;
    moduleValue *mv = o->ptr;
    moduleType *mt = mv->type;
    moduleInitIOContext(io,mt,r,key,dbid);
    mt->aof_rewrite(&io,key,mv->value);
    if (io.ctx) {
        moduleFreeContext(io.ctx);
        zfree(io.ctx);
    }
    return io.error ? 0 : 1;
}

static int rewriteFunctions(rio *aof) {
    dict *functions = functionsLibGet();
    dictIterator *iter = dictGetIterator(functions);
    dictEntry *entry = NULL;
    while ((entry = dictNext(iter))) {
        functionLibInfo *li = dictGetVal(entry);
        if (rioWrite(aof, "*3\r\n", 4) == 0) goto werr;
        char function_load[] = "$8\r\nFUNCTION\r\n$4\r\nLOAD\r\n";
        if (rioWrite(aof, function_load, sizeof(function_load) - 1) == 0) goto werr;
        if (rioWriteBulkString(aof, li->code, sdslen(li->code)) == 0) goto werr;
    }
    dictReleaseIterator(iter);
    return 1;

werr:
    dictReleaseIterator(iter);
    return 0;
}

int rewriteAppendOnlyFileRio(rio *aof) {
    dictEntry *de;
    int j;
    long key_count = 0;
    long long updated_time = 0;
    dbIterator *dbit = NULL;

    /* Record timestamp at the beginning of rewriting AOF. */
    if (server.aof_timestamp_enabled) {
        sds ts = genAofTimestampAnnotationIfNeeded(1);
        if (rioWrite(aof,ts,sdslen(ts)) == 0) { sdsfree(ts); goto werr; }
        sdsfree(ts);
    }

    if (rewriteFunctions(aof) == 0) goto werr;

    for (j = 0; j < server.dbnum; j++) {
        char selectcmd[] = "*2\r\n$6\r\nSELECT\r\n";
        /* SELECT the new DB */
        if (rioWrite(aof,selectcmd,sizeof(selectcmd)-1) == 0) goto werr;
        if (rioWriteBulkLongLong(aof,j) == 0) goto werr;
        redisDb *db = server.db + j;
        dbit = dbIteratorInit(db, DB_MAIN);
        /* Iterate this DB writing every entry */
        while((de = dbIteratorNext(dbit)) != NULL) {
            sds keystr;
            robj key, *o;
            long long expiretime;
            size_t aof_bytes_before_key = aof->processed_bytes;

            keystr = dictGetKey(de);
            o = dictGetVal(de);
            initStaticStringObject(key,keystr);

            expiretime = getExpire(db,&key);

            /* Save the key and associated value */
            if (o->type == OBJ_STRING) {
                /* Emit a SET command */
                char cmd[]="*3\r\n$3\r\nSET\r\n";
                if (rioWrite(aof,cmd,sizeof(cmd)-1) == 0) goto werr;
                /* Key and value */
                if (rioWriteBulkObject(aof,&key) == 0) goto werr;
                if (rioWriteBulkObject(aof,o) == 0) goto werr;
            } else if (o->type == OBJ_LIST) {
                if (rewriteListObject(aof,&key,o) == 0) goto werr;
            } else if (o->type == OBJ_SET) {
                if (rewriteSetObject(aof,&key,o) == 0) goto werr;
            } else if (o->type == OBJ_ZSET) {
                if (rewriteSortedSetObject(aof,&key,o) == 0) goto werr;
            } else if (o->type == OBJ_HASH) {
                if (rewriteHashObject(aof,&key,o) == 0) goto werr;
            } else if (o->type == OBJ_STREAM) {
                if (rewriteStreamObject(aof,&key,o) == 0) goto werr;
            } else if (o->type == OBJ_MODULE) {
                if (rewriteModuleObject(aof,&key,o,j) == 0) goto werr;
            } else {
                serverPanic("Unknown object type");
            }

            /* In fork child process, we can try to release memory back to the
             * OS and possibly avoid or decrease COW. We give the dismiss
             * mechanism a hint about an estimated size of the object we stored. */
            size_t dump_size = aof->processed_bytes - aof_bytes_before_key;
            if (server.in_fork_child) dismissObject(o, dump_size);

            /* Save the expire time */
            if (expiretime != -1) {
                char cmd[]="*3\r\n$9\r\nPEXPIREAT\r\n";
                if (rioWrite(aof,cmd,sizeof(cmd)-1) == 0) goto werr;
                if (rioWriteBulkObject(aof,&key) == 0) goto werr;
                if (rioWriteBulkLongLong(aof,expiretime) == 0) goto werr;
            }

            /* Update info every 1 second (approximately).
             * in order to avoid calling mstime() on each iteration, we will
             * check the diff every 1024 keys */
            if ((key_count++ & 1023) == 0) {
                long long now = mstime();
                if (now - updated_time >= 1000) {
                    sendChildInfo(CHILD_INFO_TYPE_CURRENT_INFO, key_count, "AOF rewrite");
                    updated_time = now;
                }
            }

            /* Delay before next key if required (for testing) */
            if (server.rdb_key_save_delay)
                debugDelay(server.rdb_key_save_delay);
        }
        zfree(dbit);
    }
    return C_OK;

werr:
    if (dbit) zfree(dbit);
    return C_ERR;
}

/* Write a sequence of commands able to fully rebuild the dataset into
 * "filename". Used both by REWRITEAOF and BGREWRITEAOF.
 *
 * In order to minimize the number of commands needed in the rewritten
 * log Redis uses variadic commands when possible, such as RPUSH, SADD
 * and ZADD. However at max AOF_REWRITE_ITEMS_PER_CMD items per time
 * are inserted using a single command. */
int rewriteAppendOnlyFile(char *filename) {
    rio aof;
    FILE *fp = NULL;
    char tmpfile[256];

    /* Note that we have to use a different temp name here compared to the
     * one used by rewriteAppendOnlyFileBackground() function. */
    snprintf(tmpfile,256,"temp-rewriteaof-%d.aof", (int) getpid());
    fp = fopen(tmpfile,"w");
    if (!fp) {
        serverLog(LL_WARNING, "Opening the temp file for AOF rewrite in rewriteAppendOnlyFile(): %s", strerror(errno));
        return C_ERR;
    }

    rioInitWithFile(&aof,fp);

    if (server.aof_rewrite_incremental_fsync) {
        rioSetAutoSync(&aof,REDIS_AUTOSYNC_BYTES);
        rioSetReclaimCache(&aof,1);
    }

    startSaving(RDBFLAGS_AOF_PREAMBLE);

    if (server.aof_use_rdb_preamble) {
        int error;
        if (rdbSaveRio(SLAVE_REQ_NONE,&aof,&error,RDBFLAGS_AOF_PREAMBLE,NULL) == C_ERR) {
            errno = error;
            goto werr;
        }
    } else {
        if (rewriteAppendOnlyFileRio(&aof) == C_ERR) goto werr;
    }

    /* Make sure data will not remain on the OS's output buffers */
    if (fflush(fp)) goto werr;
    if (fsync(fileno(fp))) goto werr;
    if (reclaimFilePageCache(fileno(fp), 0, 0) == -1) {
        /* A minor error. Just log to know what happens */
        serverLog(LL_NOTICE,"Unable to reclaim page cache: %s", strerror(errno));
    }
    if (fclose(fp)) { fp = NULL; goto werr; }
    fp = NULL;

    /* Use RENAME to make sure the DB file is changed atomically only
     * if the generate DB file is ok. */
    if (rename(tmpfile,filename) == -1) {
        serverLog(LL_WARNING,"Error moving temp append only file on the final destination: %s", strerror(errno));
        unlink(tmpfile);
        stopSaving(0);
        return C_ERR;
    }
    stopSaving(1);

    return C_OK;

werr:
    serverLog(LL_WARNING,"Write error writing append only file on disk: %s", strerror(errno));
    if (fp) fclose(fp);
    unlink(tmpfile);
    stopSaving(0);
    return C_ERR;
}
/* ----------------------------------------------------------------------------
 * AOF background rewrite
 * ------------------------------------------------------------------------- */

/* This is how rewriting of the append only file in background works:
 *
 * 1) The user calls BGREWRITEAOF
 * 2) Redis calls this function, that forks():
 *    2a) the child rewrite the append only file in a temp file.
 *    2b) the parent open a new INCR AOF file to continue writing.
 * 3) When the child finished '2a' exists.
 * 4) The parent will trap the exit code, if it's OK, it will:
 *    4a) get a new BASE file name and mark the previous (if we have) as the HISTORY type
 *    4b) rename(2) the temp file in new BASE file name
 *    4c) mark the rewritten INCR AOFs as history type
 *    4d) persist AOF manifest file
 *    4e) Delete the history files use bio
 */
int rewriteAppendOnlyFileBackground(void) {
    pid_t childpid;

    if (hasActiveChildProcess()) return C_ERR;

    if (dirCreateIfMissing(server.aof_dirname) == -1) {
        serverLog(LL_WARNING, "Can't open or create append-only dir %s: %s",
            server.aof_dirname, strerror(errno));
        server.aof_lastbgrewrite_status = C_ERR;
        return C_ERR;
    }

    /* We set aof_selected_db to -1 in order to force the next call to the
     * feedAppendOnlyFile() to issue a SELECT command. */
    server.aof_selected_db = -1;
    flushAppendOnlyFile(1);
    if (openNewIncrAofForAppend() != C_OK) {
        server.aof_lastbgrewrite_status = C_ERR;
        return C_ERR;
    }

    if (server.aof_state == AOF_WAIT_REWRITE) {
        /* Wait for all bio jobs related to AOF to drain. This prevents a race
         * between updates to `fsynced_reploff_pending` of the worker thread, belonging
         * to the previous AOF, and the new one. This concern is specific for a full
         * sync scenario where we don't wanna risk the ACKed replication offset
         * jumping backwards or forward when switching to a different master. */
        bioDrainWorker(BIO_AOF_FSYNC);

        /* Set the initial repl_offset, which will be applied to fsynced_reploff
         * when AOFRW finishes (after possibly being updated by a bio thread) */
        atomicSet(server.fsynced_reploff_pending, server.master_repl_offset);
        server.fsynced_reploff = 0;
    }

    server.stat_aof_rewrites++;

    if ((childpid = redisFork(CHILD_TYPE_AOF)) == 0) {
        char tmpfile[256];

        /* Child */
        redisSetProcTitle("redis-aof-rewrite");
        redisSetCpuAffinity(server.aof_rewrite_cpulist);
        snprintf(tmpfile,256,"temp-rewriteaof-bg-%d.aof", (int) getpid());
        if (rewriteAppendOnlyFile(tmpfile) == C_OK) {
            serverLog(LL_NOTICE,
                "Successfully created the temporary AOF base file %s", tmpfile);
            sendChildCowInfo(CHILD_INFO_TYPE_AOF_COW_SIZE, "AOF rewrite");
            exitFromChild(0);
        } else {
            exitFromChild(1);
        }
    } else {
        /* Parent */
        if (childpid == -1) {
            server.aof_lastbgrewrite_status = C_ERR;
            serverLog(LL_WARNING,
                "Can't rewrite append only file in background: fork: %s",
                strerror(errno));
            return C_ERR;
        }
        serverLog(LL_NOTICE,
            "Background append only file rewriting started by pid %ld",(long) childpid);
        server.aof_rewrite_scheduled = 0;
        server.aof_rewrite_time_start = time(NULL);
        return C_OK;
    }
    return C_OK; /* unreached */
}

void bgrewriteaofCommand(client *c) {
    if (server.child_type == CHILD_TYPE_AOF) {
        addReplyError(c,"Background append only file rewriting already in progress");
    } else if (hasActiveChildProcess() || server.in_exec) {
        server.aof_rewrite_scheduled = 1;
        /* When manually triggering AOFRW we reset the count 
         * so that it can be executed immediately. */
        server.stat_aofrw_consecutive_failures = 0;
        addReplyStatus(c,"Background append only file rewriting scheduled");
    } else if (rewriteAppendOnlyFileBackground() == C_OK) {
        addReplyStatus(c,"Background append only file rewriting started");
    } else {
        addReplyError(c,"Can't execute an AOF background rewriting. "
                        "Please check the server logs for more information.");
    }
}

void aofRemoveTempFile(pid_t childpid) {
    char tmpfile[256];

    snprintf(tmpfile,256,"temp-rewriteaof-bg-%d.aof", (int) childpid);
    bg_unlink(tmpfile);

    snprintf(tmpfile,256,"temp-rewriteaof-%d.aof", (int) childpid);
    bg_unlink(tmpfile);
}

/* Get size of an AOF file.
 * The status argument is an optional output argument to be filled with
 * one of the AOF_ status values. */
off_t getAppendOnlyFileSize(sds filename, int *status) {
    struct redis_stat sb;
    off_t size;
    mstime_t latency;

    sds aof_filepath = makePath(server.aof_dirname, filename);
    latencyStartMonitor(latency);
    if (redis_stat(aof_filepath, &sb) == -1) {
        if (status) *status = errno == ENOENT ? AOF_NOT_EXIST : AOF_OPEN_ERR;
        serverLog(LL_WARNING, "Unable to obtain the AOF file %s length. stat: %s",
            filename, strerror(errno));
        size = 0;
    } else {
        if (status) *status = AOF_OK;
        size = sb.st_size;
    }
    latencyEndMonitor(latency);
    latencyAddSampleIfNeeded("aof-fstat", latency);
    sdsfree(aof_filepath);
    return size;
}

/* Get size of all AOF files referred by the manifest (excluding history).
 * The status argument is an output argument to be filled with
 * one of the AOF_ status values. */
off_t getBaseAndIncrAppendOnlyFilesSize(aofManifest *am, int *status) {
    off_t size = 0;
    listNode *ln;
    listIter li;

    if (am->base_aof_info) {
        serverAssert(am->base_aof_info->file_type == AOF_FILE_TYPE_BASE);

        size += getAppendOnlyFileSize(am->base_aof_info->file_name, status);
        if (*status != AOF_OK) return 0;
    }

    listRewind(am->incr_aof_list, &li);
    while ((ln = listNext(&li)) != NULL) {
        aofInfo *ai = (aofInfo*)ln->value;
        serverAssert(ai->file_type == AOF_FILE_TYPE_INCR);
        size += getAppendOnlyFileSize(ai->file_name, status);
        if (*status != AOF_OK) return 0;
    }

    return size;
}

int getBaseAndIncrAppendOnlyFilesNum(aofManifest *am) {
    int num = 0;
    if (am->base_aof_info) num++;
    if (am->incr_aof_list) num += listLength(am->incr_aof_list);
    return num;
}

/* A background append only file rewriting (BGREWRITEAOF) terminated its work.
 * Handle this. */
void backgroundRewriteDoneHandler(int exitcode, int bysignal) {
    if (!bysignal && exitcode == 0) {
        char tmpfile[256];
        long long now = ustime();
        sds new_base_filepath = NULL;
        sds new_incr_filepath = NULL;
        aofManifest *temp_am;
        mstime_t latency;

        serverLog(LL_NOTICE,
            "Background AOF rewrite terminated with success");

        snprintf(tmpfile, 256, "temp-rewriteaof-bg-%d.aof",
            (int)server.child_pid);

        serverAssert(server.aof_manifest != NULL);

        /* Dup a temporary aof_manifest for subsequent modifications. */
        temp_am = aofManifestDup(server.aof_manifest);

        /* Get a new BASE file name and mark the previous (if we have)
         * as the HISTORY type. */
        sds new_base_filename = getNewBaseFileNameAndMarkPreAsHistory(temp_am);
        serverAssert(new_base_filename != NULL);
        new_base_filepath = makePath(server.aof_dirname, new_base_filename);

        /* Rename the temporary aof file to 'new_base_filename'. */
        latencyStartMonitor(latency);
        if (rename(tmpfile, new_base_filepath) == -1) {
            serverLog(LL_WARNING,
                "Error trying to rename the temporary AOF base file %s into %s: %s",
                tmpfile,
                new_base_filepath,
                strerror(errno));
            aofManifestFree(temp_am);
            sdsfree(new_base_filepath);
            server.aof_lastbgrewrite_status = C_ERR;
            server.stat_aofrw_consecutive_failures++;
            goto cleanup;
        }
        latencyEndMonitor(latency);
        latencyAddSampleIfNeeded("aof-rename", latency);
        serverLog(LL_NOTICE,
            "Successfully renamed the temporary AOF base file %s into %s", tmpfile, new_base_filename);

        /* Rename the temporary incr aof file to 'new_incr_filename'. */
        if (server.aof_state == AOF_WAIT_REWRITE) {
            /* Get temporary incr aof name. */
            sds temp_incr_aof_name = getTempIncrAofName();
            sds temp_incr_filepath = makePath(server.aof_dirname, temp_incr_aof_name);
            /* Get next new incr aof name. */
            sds new_incr_filename = getNewIncrAofName(temp_am);
            new_incr_filepath = makePath(server.aof_dirname, new_incr_filename);
            latencyStartMonitor(latency);
            if (rename(temp_incr_filepath, new_incr_filepath) == -1) {
                serverLog(LL_WARNING,
                    "Error trying to rename the temporary AOF incr file %s into %s: %s",
                    temp_incr_filepath,
                    new_incr_filepath,
                    strerror(errno));
                bg_unlink(new_base_filepath);
                sdsfree(new_base_filepath);
                aofManifestFree(temp_am);
                sdsfree(temp_incr_filepath);
                sdsfree(new_incr_filepath);
                sdsfree(temp_incr_aof_name);
                server.aof_lastbgrewrite_status = C_ERR;
                server.stat_aofrw_consecutive_failures++;
                goto cleanup;
            }
            latencyEndMonitor(latency);
            latencyAddSampleIfNeeded("aof-rename", latency);
            serverLog(LL_NOTICE,
                "Successfully renamed the temporary AOF incr file %s into %s", temp_incr_aof_name, new_incr_filename);
            sdsfree(temp_incr_filepath);
            sdsfree(temp_incr_aof_name);
        }

        /* Change the AOF file type in 'incr_aof_list' from AOF_FILE_TYPE_INCR
         * to AOF_FILE_TYPE_HIST, and move them to the 'history_aof_list'. */
        markRewrittenIncrAofAsHistory(temp_am);

        /* Persist our modifications. */
        if (persistAofManifest(temp_am) == C_ERR) {
            bg_unlink(new_base_filepath);
            aofManifestFree(temp_am);
            sdsfree(new_base_filepath);
            if (new_incr_filepath) {
                bg_unlink(new_incr_filepath);
                sdsfree(new_incr_filepath);
            }
            server.aof_lastbgrewrite_status = C_ERR;
            server.stat_aofrw_consecutive_failures++;
            goto cleanup;
        }
        sdsfree(new_base_filepath);
        if (new_incr_filepath) sdsfree(new_incr_filepath);

        /* We can safely let `server.aof_manifest` point to 'temp_am' and free the previous one. */
        aofManifestFreeAndUpdate(temp_am);

        if (server.aof_state != AOF_OFF) {
            /* AOF enabled. */
            server.aof_current_size = getAppendOnlyFileSize(new_base_filename, NULL) + server.aof_last_incr_size;
            server.aof_rewrite_base_size = server.aof_current_size;
        }

        /* We don't care about the return value of `aofDelHistoryFiles`, because the history
         * deletion failure will not cause any problems. */
        aofDelHistoryFiles();

        server.aof_lastbgrewrite_status = C_OK;
        server.stat_aofrw_consecutive_failures = 0;

        serverLog(LL_NOTICE, "Background AOF rewrite finished successfully");
        /* Change state from WAIT_REWRITE to ON if needed */
        if (server.aof_state == AOF_WAIT_REWRITE) {
            server.aof_state = AOF_ON;

            /* Update the fsynced replication offset that just now become valid.
             * This could either be the one we took in startAppendOnly, or a
             * newer one set by the bio thread. */
            long long fsynced_reploff_pending;
            atomicGet(server.fsynced_reploff_pending, fsynced_reploff_pending);
            server.fsynced_reploff = fsynced_reploff_pending;
        }

        serverLog(LL_VERBOSE,
            "Background AOF rewrite signal handler took %lldus", ustime()-now);
    } else if (!bysignal && exitcode != 0) {
        server.aof_lastbgrewrite_status = C_ERR;
        server.stat_aofrw_consecutive_failures++;

        serverLog(LL_WARNING,
            "Background AOF rewrite terminated with error");
    } else {
        /* SIGUSR1 is whitelisted, so we have a way to kill a child without
         * triggering an error condition. */
        if (bysignal != SIGUSR1) {
            server.aof_lastbgrewrite_status = C_ERR;
            server.stat_aofrw_consecutive_failures++;
        }

        serverLog(LL_WARNING,
            "Background AOF rewrite terminated by signal %d", bysignal);
    }

cleanup:
    aofRemoveTempFile(server.child_pid);
    /* Clear AOF buffer and delete temp incr aof for next rewrite. */
    if (server.aof_state == AOF_WAIT_REWRITE) {
        sdsfree(server.aof_buf);
        server.aof_buf = sdsempty();
        aofDelTempIncrAofFile();
    }
    server.aof_rewrite_time_last = time(NULL)-server.aof_rewrite_time_start;
    server.aof_rewrite_time_start = -1;
    /* Schedule a new rewrite if we are waiting for it to switch the AOF ON. */
    if (server.aof_state == AOF_WAIT_REWRITE)
        server.aof_rewrite_scheduled = 1;
}
