1. 20 Mar, 2024 1 commit
  2. 06 Dec, 2022 1 commit
    • Viktor Söderqvist's avatar
      When converting a set to dict, presize for one more element to be added (#11559) · 8a315fc2
      Viktor Söderqvist authored
      
      
      In most cases when a listpack or intset is converted to a dict, the conversion
      is trigged when adding an element. The extra element is added after conversion
      to dict (in all cases except when the conversion is triggered by
      set-max-intset-entries being reached).
      
      If set-max-listpack-entries is set to a power of two, let's say 128, when
      adding the 129th element, the 128 element listpack is first converted to a dict
      with a hashtable presized for 128 elements. After converting to dict, the 129th
      element is added to the dict which immediately triggers incremental rehashing
      to size 256.
      
      This commit instead presizes the dict to one more element, with the assumption
      that conversion to dict is followed by adding another element, so the dict
      doesn't immediately need rehashing.
      Co-authored-by: default avatarsundb <sundbcn@gmail.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      8a315fc2
  3. 16 Nov, 2022 1 commit
    • sundb's avatar
      Add listpack encoding for list (#11303) · 2168ccc6
      sundb authored
      Improve memory efficiency of list keys
      
      ## Description of the feature
      The new listpack encoding uses the old `list-max-listpack-size` config
      to perform the conversion, which we can think it of as a node inside a
      quicklist, but without 80 bytes overhead (internal fragmentation included)
      of quicklist and quicklistNode structs.
      For example, a list key with 5 items of 10 chars each, now takes 128 bytes
      instead of 208 it used to take.
      
      ## Conversion rules
      * Convert listpack to quicklist
        When the listpack length or size reaches the `list-max-listpack-size` limit,
        it will be converted to a quicklist.
      * Convert quicklist to listpack
        When a quicklist has only one node, and its length or size is reduced to half
        of the `list-max-listpack-size` limit, it will be converted to a listpack.
        This is done to avoid frequent conversions when we add or remove at the bounding size or length.
          
      ## Interface changes
      1. add list entry param to listTypeSetIteratorDirection
          When list encoding is listpack, `listTypeIterator->lpi` points to the next entry of current entry,
          so when changing the direction, we need to use the current node (listTypeEntry->p) to 
          update `listTypeIterator->lpi` to the next node in the reverse direction.
      
      ## Benchmark
      ### Listpack VS Quicklist with one node
      * LPUSH - roughly 0.3% improvement
      * LRANGE - roughly 13% improvement
      
      ### Both are quicklist
      * LRANGE - roughly 3% improvement
      * LRANGE without pipeline - roughly 3% improvement
      
      From the benchmark, as we can see from the results
      1. When list is quicklist encoding, LRANGE improves performance by <5%.
      2. When list is listpack encoding, LRANGE improves performance by ~13%,
         the main enhancement is brought by `addListListpackRangeReply()`.
      
      ## Memory usage
      1M lists(key:0~key:1000000) with 5 items of 10 chars ("hellohello") each.
      shows memory usage down by 35.49%, from 214MB to 138MB.
      
      ## Note
      1. Add conversion callback to support doing some work before conversion
          Since the quicklist iterator decompresses the current node when it is released, we can 
          no longer decompress the quicklist after we convert the list.
      2168ccc6
  4. 09 Nov, 2022 1 commit
    • Viktor Söderqvist's avatar
      Listpack encoding for sets (#11290) · 4e472a1a
      Viktor Söderqvist authored
      Small sets with not only integer elements are listpack encoded, by default
      up to 128 elements, max 64 bytes per element, new config `set-max-listpack-entries`
      and `set-max-listpack-value`. This saves memory for small sets compared to using a hashtable.
      
      Sets with only integers, even very small sets, are still intset encoded (up to 1G
      limit, etc.). Larger sets are hashtable encoded.
      
      This PR increments the RDB version, and has an effect on OBJECT ENCODING
      
      Possible conversions when elements are added:
      
          intset -> listpack
          listpack -> hashtable
          intset -> hashtable
      
      Note: No conversion happens when elements are deleted. If all elements are
      deleted and then added again, the set is deleted and recreated, thus implicitly
      converted to a smaller encoding.
      4e472a1a
  5. 17 Apr, 2022 1 commit
    • Oran Agra's avatar
      Optimize integer zset scores in listpack (converting to string and back) (#10486) · 0c4733c8
      Oran Agra authored
      When the score doesn't have fractional part, and can be stored as an integer,
      we use the integer capabilities of listpack to store it, rather than convert it to string.
      This already existed before this PR (lpInsert dose that conversion implicitly).
      
      But to do that, we would have first converted the score from double to string (calling `d2string`),
      then pass the string to `lpAppend` which identified it as being an integer and convert it back to an int.
      Now, instead of converting it to a string, we store it using lpAppendInteger`.
      
      Unrelated:
      ---
      * Fix the double2ll range check (negative and positive ranges, and also the comparison operands
        were slightly off. but also, the range could be made much larger, see comment).
      * Unify the double to string conversion code in rdb.c with the one in util.c
      * Small optimization in lpStringToInt64, don't attempt to convert strings that are obviously too long.
      
      Benchmark;
      ---
      Up to 20% improvement in certain tight loops doing zzlInsert with large integers.
      (if listpack is pre-allocated to avoid realloc, and insertion is sorted from largest to smaller)
      0c4733c8
  6. 24 Nov, 2021 1 commit
    • sundb's avatar
      Replace ziplist with listpack in quicklist (#9740) · 45129059
      sundb authored
      
      
      Part three of implementing #8702, following #8887 and #9366 .
      
      ## Description of the feature
      1. Replace the ziplist container of quicklist with listpack.
      2. Convert existing quicklist ziplists on RDB loading time. an O(n) operation.
      
      ## Interface changes
      1. New `list-max-listpack-size` config is an alias for `list-max-ziplist-size`.
      2. Replace `debug ziplist` command with `debug listpack`.
      
      ## Internal changes
      1. Add `lpMerge` to merge two listpacks . (same as `ziplistMerge`)
      2. Add `lpRepr` to print info of listpack which is used in debugCommand and `quicklistRepr`. (same as `ziplistRepr`)
      3. Replace `QUICKLIST_NODE_CONTAINER_ZIPLIST` with `QUICKLIST_NODE_CONTAINER_PACKED`(following #9357 ).
          It represent that a quicklistNode is a packed node, as opposed to a plain node.
      4. Remove `createZiplistObject` method, which is never used.
      5. Calculate listpack entry size using overhead overestimation in `quicklistAllowInsert`.
          We prefer an overestimation, which would at worse lead to a few bytes below the lowest limit of 4k.
      
      ## Improvements
      1. Calling `lpShrinkToFit` after converting Ziplist to listpack, which was missed at #9366.
      2. Optimize `quicklistAppendPlainNode` to avoid memcpy data.
      
      ## Bugfix
      1. Fix crash in `quicklistRepr` when ziplist is compressed, introduced from #9366.
      
      ## Test
      1. Add unittest for `lpMerge`.
      2. Modify the old quicklist ziplist corrupt dump test.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      45129059
  7. 16 Nov, 2021 1 commit
  8. 04 Oct, 2021 1 commit
    • Oran Agra's avatar
      Fix ziplist and listpack overflows and truncations (CVE-2021-32627, CVE-2021-32628) (#9589) · c5e6a620
      Oran Agra authored
      
      
      - fix possible heap corruption in ziplist and listpack resulting by trying to
        allocate more than the maximum size of 4GB.
      - prevent ziplist (hash and zset) from reaching size of above 1GB, will be
        converted to HT encoding, that's not a useful size.
      - prevent listpack (stream) from reaching size of above 1GB.
      - XADD will start a new listpack if the new record may cause the previous
        listpack to grow over 1GB.
      - XADD will respond with an error if a single stream record is over 1GB
      - List type (ziplist in quicklist) was truncating strings that were over 4GB,
        now it'll respond with an error.
      Co-authored-by: default avatarsundb <sundbcn@gmail.com>
      c5e6a620
  9. 09 Sep, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_zset (#9366) · 3ca6972e
      sundb authored
      Part two of implementing #8702 (zset), after #8887.
      
      ## Description of the feature
      Replaced all uses of ziplist with listpack in t_zset, and optimized some of the code to optimize performance.
      
      ## Rdb format changes
      New `RDB_TYPE_ZSET_LISTPACK` rdb type.
      
      ## Rdb loading improvements:
      1) Pre-expansion of dict for validation of duplicate data for listpack and ziplist.
      2) Simplifying the release of empty key objects when RDB loading.
      3) Unify ziplist and listpack data verify methods for zset and hash, and move code to rdb.c.
      
      ## Interface changes
      1) New `zset-max-listpack-entries` config is an alias for `zset-max-ziplist-entries` (same with `zset-max-listpack-value`).
      2) OBJECT ENCODING will return listpack instead of ziplist.
      
      ## Listpack improvements:
      1) Add `lpDeleteRange` and `lpDeleteRangeWithEntry` functions to delete a range of entries from listpack.
      2) Improve the performance of `lpCompare`, converting from string to integer is faster than converting from integer to string.
      3) Replace `snprintf` with `ll2string` to improve performance in converting numbers to strings in `lpGet()`.
      
      ## Zset improvements:
      1) Improve the performance of `zzlFind` method, use `lpFind` instead of `lpCompare` in a loop.
      2) Use `lpDeleteRangeWithEntry` instead of `lpDelete` twice to delete a element of zset.
      
      ## Tests
      1) Add some unittests for `lpDeleteRange` and `lpDeleteRangeWithEntry` function.
      2) Add zset RDB loading test.
      3) Add benchmark test for `lpCompare` and `ziplsitCompare`.
      4) Add empty listpack zset corrupt dump test.
      3ca6972e
  10. 10 Aug, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_hash (#8887) · 02fd76b9
      sundb authored
      
      
      Part one of implementing #8702 (taking hashes first before other types)
      
      ## Description of the feature
      1. Change ziplist encoded hash objects to listpack encoding.
      2. Convert existing ziplists on RDB loading time. an O(n) operation.
      
      ## Rdb format changes
      1. Add RDB_TYPE_HASH_LISTPACK rdb type.
      2. Bump RDB_VERSION to 10
      
      ## Interface changes
      1. New `hash-max-listpack-entries` config is an alias for `hash-max-ziplist-entries` (same with `hash-max-listpack-value`)
      2. OBJECT ENCODING will return `listpack` instead of `ziplist`
      
      ## Listpack improvements:
      1. Support direct insert, replace integer element (rather than convert back and forth from string)
      3. Add more listpack capabilities to match the ziplist ones (like `lpFind`, `lpRandomPairs` and such)
      4. Optimize element length fetching, avoid multiple calculations
      5. Use inline to avoid function call overhead.
      
      ## Tests
      1. Add a new test to the RDB load time conversion
      2. Adding the listpack unit tests. (based on the one in ziplist.c)
      3. Add a few "corrupt payload: fuzzer findings" tests, and slightly modify existing ones.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      02fd76b9
  11. 05 Aug, 2021 1 commit
    • Oran Agra's avatar
      Improvements to corrupt payload sanitization (#9321) · 0c90370e
      Oran Agra authored
      
      
      Recently we found two issues in the fuzzer tester: #9302 #9285
      After fixing them, more problems surfaced and this PR (as well as #9297) aims to fix them.
      
      Here's a list of the fixes
      - Prevent an overflow when allocating a dict hashtable
      - Prevent OOM when attempting to allocate a huge string
      - Prevent a few invalid accesses in listpack
      - Improve sanitization of listpack first entry
      - Validate integrity of stream consumer groups PEL
      - Validate integrity of stream listpack entry IDs
      - Validate ziplist tail followed by extra data which start with 0xff
      Co-authored-by: default avatarsundb <sundbcn@gmail.com>
      0c90370e
  12. 16 Feb, 2021 1 commit
  13. 06 Dec, 2020 1 commit
    • Oran Agra's avatar
      Sanitize dump payload: ziplist, listpack, zipmap, intset, stream · ca1c1825
      Oran Agra authored
      When loading an encoded payload we will at least do a shallow validation to
      check that the size that's encoded in the payload matches the size of the
      allocation.
      This let's us later use this encoded size to make sure the various offsets
      inside encoded payload don't reach outside the allocation, if they do, we'll
      assert/panic, but at least we won't segfault or smear memory.
      
      We can also do 'deep' validation which runs on all the records of the encoded
      payload and validates that they don't contain invalid offsets. This lets us
      detect corruptions early and reject a RESTORE command rather than accepting
      it and asserting (crashing) later when accessing that payload via some command.
      
      configuration:
      - adding ACL flag skip-sanitize-payload
      - adding config sanitize-dump-payload [yes/no/clients]
      
      For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
      being slowed down by these sanitation, so i'm setting the default value to `no`,
      but later on it should be set to `clients` by default.
      
      changes:
      - changing rdbReportError not to `exit` in RESTORE command
      - adding a new stat to be able to later check if cluster MIGRATE isn't being
        slowed down by sanitation.
      ca1c1825
  14. 01 Dec, 2017 1 commit
  15. 27 Mar, 2017 1 commit
  16. 25 Jul, 2015 1 commit
  17. 08 Nov, 2012 1 commit
  18. 01 Jul, 2010 1 commit
    • antirez's avatar
      redis.c split into many different C files. · e2641e09
      antirez authored
      networking related stuff moved into networking.c
      
      moved more code
      
      more work on layout of source code
      
      SDS instantaneuos memory saving. By Pieter and Salvatore at VMware ;)
      
      cleanly compiling again after the first split, now splitting it in more C files
      
      moving more things around... work in progress
      
      split replication code
      
      splitting more
      
      Sets split
      
      Hash split
      
      replication split
      
      even more splitting
      
      more splitting
      
      minor change
      e2641e09
  19. 19 Feb, 2010 1 commit
  20. 28 May, 2009 1 commit
  21. 19 May, 2009 2 commits