1. 24 Feb, 2022 2 commits
  2. 23 Feb, 2022 3 commits
    • Itamar Haber's avatar
      Add stream consumer group lag tracking and reporting (#9127) · c81c7f51
      Itamar Haber authored
      
      
      Adds the ability to track the lag of a consumer group (CG), that is, the number
      of entries yet-to-be-delivered from the stream.
      
      The proposed constant-time solution is in the spirit of "best-effort."
      
      Partially addresses #8737.
      
      ## Description of approach
      
      We add a new "entries_added" property to the stream. This starts at 0 for a new
      stream and is incremented by 1 with every `XADD`.  It is essentially an all-time
      counter of the entries added to the stream.
      
      Given the stream's length and this counter value, we can trivially find the logical
      "entries_added" counter of the first ID if and only if the stream is contiguous.
      A fragmented stream contains one or more tombstones generated by `XDEL`s.
      The new "xdel_max_id" stream property tracks the latest tombstone.
      
      The CG also tracks its last delivered ID's as an "entries_read" counter and
      increments it independently when delivering new messages, unless the this
      read counter is invalid (-1 means invalid offset). When the CG's counter is
      available, the reported lag is the difference between added and read counters.
      
      Lastly, this also adds a "first_id" field to the stream structure in order to make
      looking it up cheaper in most cases.
      
      ## Limitations
      
      There are two cases in which the mechanism isn't able to track the lag.
      In these cases, `XINFO` replies with `null` in the "lag" field.
      
      The first case is when a CG is created with an arbitrary last delivered ID,
      that isn't "0-0", nor the first or the last entries of the stream. In this case,
      it is impossible to obtain a valid read counter (short of an O(N) operation).
      The second case is when there are one or more tombstones fragmenting
      the stream's entries range.
      
      In both cases, given enough time and assuming that the consumers are
      active (reading and lacking) and advancing, the CG should be able to
      catch up with the tip of the stream and report zero lag.
      Once that's achieved, lag tracking would resume as normal (until the
      next tombstone is set).
      
      ## API changes
      
      * `XGROUP CREATE` added with the optional named argument `[ENTRIESREAD entries-read]`
        for explicitly specifying the new CG's counter.
      * `XGROUP SETID` added with an optional positional argument `[ENTRIESREAD entries-read]`
        for specifying the CG's counter.
      * `XINFO` reports the maximal tombstone ID, the recorded first entry ID, and total
        number of entries added to the stream.
      * `XINFO` reports the current lag and logical read counter of CGs.
      * `XSETID` is an internal command that's used in replication/aof. It has been added with
        the optional positional arguments `[ENTRIESADDED entries-added] [MAXDELETEDID max-deleted-entry-id]`
        for propagating the CG's offset and maximal tombstone ID of the stream.
      
      ## The generic unsolved problem
      
      The current stream implementation doesn't provide an efficient way to obtain the
      approximate/exact size of a range of entries. While it could've been nice to have
      that ability (#5813) in general, let alone specifically in the context of CGs, the risk
      and complexities involved in such implementation are in all likelihood prohibitive.
      
      ## A refactoring note
      
      The `streamGetEdgeID` has been refactored to accommodate both the existing seek
      of any entry as well as seeking non-deleted entries (the addition of the `skip_tombstones`
      argument). Furthermore, this refactoring also migrated the seek logic to use the
      `streamIterator` (rather than `raxIterator`) that was, in turn, extended with the
      `skip_tombstones` Boolean struct field to control the emission of these.
      Co-authored-by: default avatarGuy Benoish <guy.benoish@redislabs.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      c81c7f51
    • filipe oliveira's avatar
      Optimize deferred replies to use shared objects instead of sprintf (#10334) · b857928b
      filipe oliveira authored
      
      
      Avoid sprintf/ll2string on setDeferredAggregateLen()/addReplyLongLongWithPrefix() when we can used shared objects.
      In some pipelined workloads this achieves about 10% improvement.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      b857928b
    • Moti Cohen's avatar
      Sentinel: fix a free-after-use issue re-registering Sentinels. (#10333) · a7179e75
      Moti Cohen authored
      In case HELLO message received from another sentinel, with same address like another instance registered in the past but with different runid. Then there was cumbersome logic to modify the instance the port to 0 to in order to mark as invalid and later on to delete it. But the deletion is happening during update of instances in such a way that we might end up accessing an instance that was deleted just before.
      
      Didn't find a good reason why to postpone the deletion action of an obsolete instance (deletion is taking place instantly, for other cases ) -> Lets delete at once
      There is a mixture of logic of Sentinel address update with the logic of deletion of Sentinels that match a given Address -> Split to two!
      a7179e75
  3. 22 Feb, 2022 8 commits
    • Wen Hui's avatar
      Fix PUBSUB SHARDNUMSUB command json file (#10331) · de6be885
      Wen Hui authored
      argument was missing, affecting redis.io docs
      de6be885
    • Andy Pan's avatar
      Reduce system calls of write for client->reply by introducing writev (#9934) · 496375fc
      Andy Pan authored
      There are scenarios where it results in many small objects in the reply list,
      such as commands heavily using deferred array replies (`addReplyDeferredLen`).
      E.g. what COMMAND command and CLUSTER SLOTS used to do (see #10056, #7123),
      but also in case of a transaction or a pipeline of commands that use just one differed array reply.
      
      We used to have to run multiple loops along with multiple calls to `write()` to send data back to
      peer based on the current code, but by means of `writev()`, we can gather those scattered
      objects in reply list and include the static reply buffer as well, then send it by one system call,
      that ought to achieve higher performance.
      
      In the case of TLS,  we simply check and concatenate buffers into one big buffer and send it
      away by one call to `connTLSWrite()`, if the amount of all buffers exceeds `NET_MAX_WRITES_PER_EVENT`,
      then invoke `connTLSWrite()` multiple times to avoid a huge massive of memory copies.
      
      Note that aside of reducing system calls, this change will also reduce the amount of
      small TCP packets sent.
      496375fc
    • Viktor Söderqvist's avatar
      Delete key doesn't dirty client who watched stale key (#10256) · e9ae0378
      Viktor Söderqvist authored
      
      
      When WATCH is called on a key that's already logically expired, avoid discarding the
      transaction when the keys is actually deleted.
      
      When WATCH is called, a flag is stored if the key is already expired
      at the time of watch. The expired key is not deleted, only checked.
      
      When a key is "touched", if it is deleted and it was already expired
      when a client watched it, the client is not marked as dirty.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarzhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
      e9ae0378
    • ranshid's avatar
      introduce dynamic client reply buffer size - save memory on idle clients (#9822) · 47c51d0c
      ranshid authored
      
      
      Current implementation simple idle client which serves no traffic still
      use ~17Kb of memory. this is mainly due to a fixed size reply buffer
      currently set to 16kb.
      
      We have encountered some cases in which the server operates in a low memory environments.
      In such cases a user who wishes to create large connection pools to support potential burst period,
      will exhaust a large amount of memory  to maintain connected Idle clients.
      Some users may choose to "sacrifice" performance in order to save memory.
      
      This commit introduce a dynamic mechanism to shrink and expend the client reply buffer based on
      periodic observed peak.
      the algorithm works as follows:
      1. each time a client reply buffer has been fully written, the last recorded peak is updated: 
      new peak = MAX( last peak, current written size)
      2. during clients cron we check for each client if the last observed peak was:
           a. matching the current buffer size - in which case we expend (resize) the buffer size by 100%
           b. less than half the buffer size - in which case we shrink the buffer size by 50%
      3. In any case we will **not** resize the buffer in case:
          a. the current buffer peak is less then the current buffer usable size and higher than 1/2 the
            current buffer usable size
          b. the value of (current buffer usable size/2) is less than 1Kib
          c. the value of  (current buffer usable size*2) is larger than 16Kib
      4. the peak value is reset to the current buffer position once every **5** seconds. we maintain a new
         field in the client structure (buf_peak_last_reset_time) which is used to keep track of how long it
         passed since the last buffer peak reset.
      
      ### **Interface changes:**
      **CIENT LIST** - now contains 2 new extra fields:
      rbs= < the current size in bytes of the client reply buffer >
      rbp=< the current value in bytes of the last observed buffer peak position >
      
      **INFO STATS** - now contains 2 new statistics:
      reply_buffer_shrinks = < total number of buffer shrinks performed >
      reply_buffer_expends = < total number of buffer expends performed >
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarYoav Steinberg <yoav@redislabs.com>
      47c51d0c
    • Madelyn Olson's avatar
      Implemented module getchannels api and renamed channel keyspec (#10299) · 71204f96
      Madelyn Olson authored
      This implements the following main pieces of functionality:
      * Renames key spec "CHANNEL" to be "NOT_KEY", and update the documentation to
        indicate it's for cluster routing and not for any other key related purpose.
      * Add the getchannels-api, so that modules can now define commands that are subject to
        ACL channel permission checks. 
      * Add 4 new flags that describe how a module interacts with a command (SUBSCRIBE, PUBLISH,
        UNSUBSCRIBE, and PATTERN). They are all technically composable, however not sure how a
        command could both subscribe and unsubscribe from a command at once, but didn't see
        a reason to add explicit validation there.
      * Add two new module apis RM_ChannelAtPosWithFlags and RM_IsChannelsPositionRequest to
        duplicate the functionality provided by the keys position APIs.
      * The RM_ACLCheckChannelPermissions (only released in 7.0 RC1) was changed to take flags
        rather than a boolean literal.
      * The RM_ACLCheckKeyPermissions (only released in 7.0 RC1) was changed to take flags
        corresponding to keyspecs instead of custom permission flags. These keyspec flags mimic
        the flags for ACLCheckChannelPermissions.
      71204f96
    • Binbin's avatar
      Remove ALLOW_BUSY from REPLICAOF and add it to REPLCONF. Add DEPRECATED doc... · c4c68f5d
      Binbin authored
      Remove ALLOW_BUSY from REPLICAOF and add it to REPLCONF. Add DEPRECATED doc flag to SLAVEOF, mark it as deprecated. (#10315)
      
      * Remove ALLOW_BUSY from REPLICAOF and add it to REPLCONF
      * mark SLAVEOF as deprecated
      c4c68f5d
    • chenyang8094's avatar
      Fix path copy error and add more logs. (#10324) · 4916d79f
      chenyang8094 authored
      Since we didn't copy the null terminator to temp_filepath, dirname could return the wrong result.
      4916d79f
    • YaacovHazan's avatar
      fix return value of loadAppendOnlyFiles (#10295) · 65e4bce0
      YaacovHazan authored
      
      
      Make sure the status return from loading multiple AOF files reflects the overall
      result, not just the one of the last file.
      
      When one of the AOF files succeeded to load, but the last AOF file
      was empty, the loadAppendOnlyFiles will return AOF_EMPTY.
      This commit changes this behavior, and return AOF_OK in that case.
      
      This can happen for example, when loading old AOF file, and no more commands processed,
      the manifest file will include base AOF file with data, and empty incr AOF file.
      Co-authored-by: default avatarchenyang8094 <chenyang8094@users.noreply.github.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      65e4bce0
  4. 21 Feb, 2022 3 commits
    • Oran Agra's avatar
      Fix error stats and failed command stats for blocked clients (#10309) · fad0b0d2
      Oran Agra authored
      This is a followup work for #10278, and a discussion about #10279
      
      The changes:
      - fix failed_calls in command stats for blocked clients that got error.
        including CLIENT UNBLOCK, and module replying an error from a thread.
      - fix latency stats for XREADGROUP that filed with -NOGROUP
      
      Theory behind which errors should be counted:
      - error stats represents errors returned to the user, so an error handled by a
        module should not be counted.
      - total error counter should be the same.
      - command stats represents execution of commands (even with RM_Call, and if
        they fail or get rejected it counts these calls in commandstats, so it should
        also count failed_calls)
      
      Some thoughts about Scripts:
      for scripts it could be different since they're part of user code, not the infra (not an extension to redis)
      we certainly want commandstats to contain all calls and errors
      a simple script is like mult-exec transaction so an error inside it should be counted in error stats
      a script that replies with an error to the user (using redis.error_reply) should also be counted in error stats
      but then the problem is that a plain `return redis.call("SET")` should not be counted twice (once for the SET
      and once for EVAL)
      so that's something left to be resolved in #10279
      fad0b0d2
    • yoav-steinberg's avatar
      Fix script active defrag test (#10318) · b59bb9b4
      yoav-steinberg authored
      This includes two fixes:
      * We forgot to count non-key reallocs in defragmentation stats.
      * Fix the script defrag tests so to make dict entries less signigicant in fragmentation by making the scripts larger.
      This assures active defrage will complete and reach desired results.
      Some inherent fragmentation might exists in dict entries which we need to ignore.
      This lead to occasional CI failures.
      b59bb9b4
    • qetu3790's avatar
      Fix geo search bounding box check causing missing results (#10018) · b2d393b9
      qetu3790 authored
      
      
      Consider the following example:
      1. geoadd k1 -0.15307903289794921875 85 n1 0.3515625 85.00019260486917005437 n2.
      2. geodist k1 n1 n2 returns  "4891.9380"
      3. but GEORADIUSBYMEMBER k1 n1 4891.94 m only returns n1.
      n2 is in the  boundingbox but out of search areas.So we let  search areas contain boundingbox to get n2.
      Co-authored-by: default avatarBinbin <binloveplay1314@qq.com>
      b2d393b9
  5. 20 Feb, 2022 2 commits
    • rangerzhang's avatar
      Fix a mistake in comments (#10312) · 9b0fd9f4
      rangerzhang authored
      There is no variable named by REPL_STATE_RECEIVE_PSYNC_REPLY, it should be REPL_STATE_RECEIVE_PSYNC_REPLY according to the contexts.
      9b0fd9f4
    • Binbin's avatar
      Show publishshard_sent stat in cluster info (#10314) · c0ea77f0
      Binbin authored
      publishshard was added in #8621 (7.0 RC1), but the publishshard_sent
      stat is not shown in CLUSTER INFO command.
      
      Other changes:
      1. Remove useless `needhelp` statements, it was removed in 3dad8196.
      2. Use `LL_WARNING` log level for some error logs (I/O error, Connection failed).
      3. Fix typos that saw by the way.
      c0ea77f0
  6. 17 Feb, 2022 2 commits
    • yoav-steinberg's avatar
      aof rewrite and rdb save counters in info (#10178) · 56fa48ff
      yoav-steinberg authored
      Add aof_rewrites and rdb_snapshots counters to info.
      This is useful to figure our if a rewrite or snapshot happened since last check.
      This was part of the (ongoing) effort to provide a safe backup solution for multipart-aof backups.
      56fa48ff
    • chenyang8094's avatar
      Adapt redis-check-aof tool for Multi Part Aof (#10061) · a50aa29b
      chenyang8094 authored
      Modifications of this PR:
      1. Support the verification of `Multi Part AOF`, while still maintaining support for the
        old-style `AOF/RDB-preamble`. `redis-check-aof` will automatically choose which
        mode to use according to the incoming file format.
         
      `Usage: redis-check-aof [--fix|--truncate-to-timestamp $timestamp] <AOF/manifest>`
       
      2. Refactor part of the code to make it easier to understand
      3. Currently only supports truncate  (`--fix` or `--truncate-to-timestamp`) the last AOF
        file (may be `BASE` or `INCR`)
      
      The reasons for 3 above:
      - for `--fix`: Only the last AOF may be truncated, this is guaranteed by redis
      - for `--truncate-to-timestamp`:  Normally, we only have `BASE` + `INCR` files
        at most, and `BASE` cannot be truncated(It only contains a timestamp annotation
        at the beginning of the file), so only `INCR` can be truncated. If we have a
        `BASE+INCR1+INCR2` file (meaning we have an interrupted AOFRW), Only `INCR2`
        files can be truncated at this time. If we still insist on truncate `INCR1`, we need to
        manually delete `INCR2` and update the manifest file, then re-run `redis-check-aof`
      - If we want to support truncate any file, we need to add very complicated code to support
        the atomic modification of multiple file deletion and update manifest, I think this is unnecessary
      a50aa29b
  7. 16 Feb, 2022 2 commits
  8. 15 Feb, 2022 1 commit
    • Yossi Gottlieb's avatar
      Fix OpenSSL 3.0.x related issues. (#10291) · 3881f785
      Yossi Gottlieb authored
      * Drop obsolete initialization calls.
      * Use decoder API for DH parameters.
      * Enable auto DH parameters if not explicitly used, which should be the
        preferred configuration going forward.
      3881f785
  9. 13 Feb, 2022 1 commit
    • Oran Agra's avatar
      Fix and improve module error reply statistics (#10278) · b099889a
      Oran Agra authored
      This PR handles several aspects
      1. Calls to RM_ReplyWithError from thread safe contexts don't violate thread safety.
      2. Errors returning from RM_Call to the module aren't counted in the statistics (they
        might be handled silently by the module)
      3. When a module propagates a reply it got from RM_Call to it's client, then the error
        statistics are counted.
      
      This is done by:
      1. When appending an error reply to the output buffer, we avoid updating the global
        error statistics, instead we cache that error in a deferred list in the client struct.
      2. When creating a RedisModuleCallReply object, the deferred error list is moved from
        the client into that object.
      3. when a module calls RM_ReplyWithCallReply we copy the deferred replies to the dest
        client (if that's a real client, then that's when the error statistics are updated to the server)
      
      Note about RM_ReplyWithCallReply: if the original reply had an array with errors, and the module
      replied with just a portion of the original reply, and not the entire reply, the errors are currently not
      propagated and the errors stats will not get propagated.
      
      Fix #10180
      b099889a
  10. 11 Feb, 2022 4 commits
    • yoav-steinberg's avatar
      Fix Eval scripts defrag (broken 7.0 in RC1) (#10271) · 2eb9b196
      yoav-steinberg authored
      Remove scripts defragger since it was broken since #10126 (released in 7.0 RC1).
      would crash the server if defragger starts in a server that contains eval scripts.
      
      In #10126 the global `lua_script` dict became a dict to a custom `luaScript` struct with an internal `robj`
      in it instead of a generic `sds` -> `robj` dict. This means we need custom code to defrag it and since scripts
      should never really cause much fragmentation it makes more sense to simply remove the defrag code for scripts.
      2eb9b196
    • sundb's avatar
      Fix duplicate module options define (#10284) · 5f0119ca
      sundb authored
      
      
      The bug is introduced by #9323. (released in 7.0 RC1)
      The define of `REDISMODULE_OPTIONS_HANDLE_IO_ERRORS` and `REDISMODULE_OPTION_NO_IMPLICIT_SIGNAL_MODIFIED` have the same value.
      
      This will result in skipping `signalModifiedKey()` after `RM_CloseKey()` if the module has set
      `REDISMODULE_OPTIONS_HANDLE_REPL_ASYNC_LOAD` option.
      The implication is missing WATCH and client side tracking invalidations.
      
      Other changes:
      - add `no-implicit-signal-modified` to the options in INFO modules
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      5f0119ca
    • chenyang8094's avatar
      Modify AOF preamble related logs, and change the RDB aux field (#10283) · a2f2b6f5
      chenyang8094 authored
      In multi-part aof,  We no longer have the concept of `RDB-preamble`, so the related logs should be removed.
      However, in order to print compatible logs when loading old-style AOFs, we also have to keep the relevant code.
      Additionally, when saving an RDB, change the RDB aux field from "aof-preamble" to "aof-base".
      a2f2b6f5
    • Harkrishn Patro's avatar
  11. 10 Feb, 2022 1 commit
  12. 09 Feb, 2022 3 commits
  13. 08 Feb, 2022 8 commits
    • Oran Agra's avatar
      Attempt to fix a rare crash in cluster tests. (#10265) · aa9beaca
      Oran Agra authored
      The theory is that a replica gets disconnected from within REPLCONF ACK,
      so when we go up the stack, we'll crash when attempting to access
      c->cmd->flags
      aa9beaca
    • gms's avatar
      Fix SENTINEL DEBUG with wrong arguments (#10258) · 0990dec3
      gms authored
      There are two issues in SENTINEL DEBUG:
      1. The error message should mention SENTINEL DEBUG
      2. Add missing reuturn in args parse.
      
      ```
      redis> sentinel debug INFO-PERIOD aaa
      (error) ERR Invalid argument 'aaa' for SENTINEL SET 'INFO-PERIOD'
      
      redis> sentinel debug a b c d
      (error) ERR Unknown option or number of arguments for SENTINEL SET 'a'
      redis> ping
      (error) ERR Unknown option or number of arguments for SENTINEL SET 'b'
      ```
      
      Introduced in #9291. Also do some cleanups in the code.
      0990dec3
    • weiguo's avatar
      Remove duplicate header file include (#10264) · 34c288fe
      weiguo authored
      34c288fe
    • Viktor Söderqvist's avatar
      Remove assert and refuse delete expired on ro replicas (#10248) · b571c960
      Viktor Söderqvist authored
      There's an assertion added recently to make sure that non-write commands don't use lookupKeyWrite,
      It was initially meant to be used only on read-only replicas, but we thought it'll not have enough coverage,
      so used it on the masters too.
      We now realize that in some cases this can cause issues for modules, so we remove the assert.
      
      Other than that, we also make sure not to force expireIfNeeded on read-only replicas.
      even if they somehow run a write command.
      
      See https://github.com/redis/redis/pull/9572#discussion_r800179373
      b571c960
    • Wen Hui's avatar
      Make INFO command variadic (#6891) · 2e1bc942
      Wen Hui authored
      
      
      This is an enhancement for INFO command, previously INFO only support one argument
      for different info section , if user want to get more categories information, either perform
      INFO all / default or calling INFO for multiple times.
      
      **Description of the feature**
      
      The goal of adding this feature is to let the user retrieve multiple categories via the INFO
      command, and still avoid emitting the same section twice.
      
      A use case for this is like Redis Sentinel, which periodically calling INFO command to refresh
      info from monitored Master/Slaves, only Server and Replication part categories are used for
      parsing information. If the INFO command can return just enough categories that client side
      needs, it can save a lot of time for client side parsing it as well as network bandwidth.
      
      **Implementation**
      To share code between redis, sentinel, and other users of INFO (DEBUG and modules),
      we have a new `genInfoSectionDict` function that returns a dict and some boolean flags
      (e.g. `all`) to the caller (built from user input).
      Sentinel is later purging unwanted sections from that, and then it is forwarded to the info `genRedisInfoString`.
      
      **Usage Examples**
      INFO Server Replication   
      INFO CPU Memory
      INFO default commandstats
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      2e1bc942
    • yoav-steinberg's avatar
      Consistent erros returned from EVAL scripts (#10218) · b76016a9
      yoav-steinberg authored
      This PR handles inconsistencies in errors returned from lua scripts.
      Details of the problem can be found in #10165.
      
      ### Changes
      
      - Remove double stack trace. It's enough that a stack trace is automatically added by the engine's error handler
        see https://github.com/redis/redis/blob/d0bc4fff18afdf9e5421cc88e23ffbb876ecaec3/src/function_lua.c#L472-L485
        and https://github.com/redis/redis/blob/d0bc4fff18afdf9e5421cc88e23ffbb876ecaec3/src/eval.c#L243-L255
      - Make sure all errors a preceded with an error code. Passing a simple string to `luaPushError()` will prepend it
        with a generic `ERR` error code.
      - Make sure lua error table doesn't include a RESP `-` error status. Lua stores redis error's as a lua table with a
        single `err` field and a string. When the string is translated back to RESP we add a `-` to it.
        See https://github.com/redis/redis/blob/d0bc4fff18afdf9e5421cc88e23ffbb876ecaec3/src/script_lua.c#L510-L517
        So there's no need to store it in the lua table.
      
      ### Before & After
      ```diff
      --- <unnamed>
      +++ <unnamed>
      @@ -1,14 +1,14 @@
        1: config set maxmemory 1
        2: +OK
        3: eval "return redis.call('set','x','y')" 0
      - 4: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: @user_script: 1: -OOM command not allowed when used memory > 'maxmemory'.
      + 4: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: OOM command not allowed when used memory > 'maxmemory'.
        5: eval "return redis.pcall('set','x','y')" 0
      - 6: -@user_script: 1: -OOM command not allowed when used memory > 'maxmemory'.
      + 6: -OOM command not allowed when used memory > 'maxmemory'.
        7: eval "return redis.call('select',99)" 0
        8: -ERR Error running script (call to 4ad5abfc50bbccb484223905f9a16f09cd043ba8): @user_script:1: ERR DB index is out of range
        9: eval "return redis.pcall('select',99)" 0
       10: -ERR DB index is out of range
       11: eval_ro "return redis.call('set','x','y')" 0
      -12: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: @user_script: 1: Write commands are not allowed from read-only scripts.
      +12: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: ERR Write commands are not allowed from read-only scripts.
       13: eval_ro "return redis.pcall('set','x','y')" 0
      -14: -@user_script: 1: Write commands are not allowed from read-only scripts.
      +14: -ERR Write commands are not allowed from read-only scripts.
      ```
      b76016a9
    • guybe7's avatar
      X[AUTO]CLAIM should skip deleted entries (#10227) · 3c3e6cc1
      guybe7 authored
      Fix #7021 #8924 #10198
      
      # Intro
      Before this commit X[AUTO]CLAIM used to transfer deleted entries from one
      PEL to another, but reply with "nil" for every such entry (instead of the entry id).
      The idea (for XCLAIM) was that the caller could see this "nil", realize the entry
      no longer exists, and XACK it in order to remove it from PEL.
      The main problem with that approach is that it assumes there's a correlation
      between the index of the "id" arguments and the array indices, which there
      isn't (in case some of the input IDs to XCLAIM never existed/read):
      
      ```
      127.0.0.1:6379> XADD x 1 f1 v1
      "1-0"
      127.0.0.1:6379> XADD x 2 f1 v1
      "2-0"
      127.0.0.1:6379> XADD x 3 f1 v1
      "3-0"
      127.0.0.1:6379> XGROUP CREATE x grp 0
      OK
      127.0.0.1:6379> XREADGROUP GROUP grp Alice COUNT 2 STREAMS x >
      1) 1) "x"
         2) 1) 1) "1-0"
               2) 1) "f1"
                  2) "v1"
            2) 1) "2-0"
               2) 1) "f1"
                  2) "v1"
      127.0.0.1:6379> XDEL x 1 2
      (integer) 2
      127.0.0.1:6379> XCLAIM x grp Bob 0 0-99 1-0 1-99 2-0
      1) (nil)
      2) (nil)
      ```
      
      # Changes
      Now,  X[AUTO]CLAIM acts in the following way:
      1. If one tries to claim a deleted entry, we delete it from the PEL we found it in
        (and the group PEL too). So de facto, such entry is not claimed, just cleared
        from PEL (since anyway it doesn't exist in the stream)
      2. since we never claim deleted entries, X[AUTO]CLAIM will never return "nil"
        instead of an entry.
      3. add a new element to XAUTOCLAIM's response (see below)
      
      # Knowing which entries were cleared from the PEL
      The caller may want to log any entries that were found in a PEL but deleted from
      the stream itself (it would suggest that there might be a bug in the application:
      trimming the stream while some entries were still no processed by the consumers)
      
      ## XCLAIM
      the set {XCLAIM input ids} - {XCLAIM returned ids} contains all the entry ids that were
      not claimed which means they were deleted (assuming the input contains only entries
      from some PEL). The user doesn't need to XACK them because XCLAIM had already
      deleted them from the source PEL.
      
      ## XAUTOCLAIM
      XAUTOCLAIM has a new element added to its reply: it's an array of all the deleted
      stream IDs it stumbled upon.
      
      This is somewhat of a breaking change since X[AUTO]CLAIM used to be able to reply
      with "nil" and now it can't... But since it was undocumented (and generally a bad idea
      to rely on it, as explained above) the breakage is not that bad.
      3c3e6cc1
    • Oran Agra's avatar
      Handle key-spec flags with modules (#10237) · 66be30f7
      Oran Agra authored
      - add COMMAND GETKEYSANDFLAGS sub-command
      - add RM_KeyAtPosWithFlags and GetCommandKeysWithFlags
      - RM_KeyAtPos and RM_CreateCommand set flags requiring full access for keys
      - RM_CreateCommand set VARIABLE_FLAGS
      - expose `variable_flags` flag in COMMAND INFO key-specs
      - getKeysFromCommandWithSpecs prefers key-specs over getkeys-api
      - add tests for all of these
      66be30f7