1. 21 Dec, 2021 2 commits
    • Meir Shpilraien (Spielrein)'s avatar
      Change FUNCTION CREATE, DELETE and FLUSH to be WRITE commands instead of MAY_REPLICATE. (#9953) · 3bcf1084
      Meir Shpilraien (Spielrein) authored
      The issue with MAY_REPLICATE is that all automatic mechanisms to handle
      write commands will not work. This require have a special treatment for:
      * Not allow those commands to be executed on RO replica.
      * Allow those commands to be executed on RO replica from primary connection.
      * Allow those commands to be executed on the RO replica from AOF.
      
      By setting those commands as WRITE commands we are getting all those properties from Redis.
      Test was added to verify that those properties work as expected.
      
      In addition, rearrange when and where functions are flushed. Before this PR functions were
      flushed manually on `rdbLoadRio` and cleaned manually on failure. This contradicts the
      assumptions that functions are data and need to be created/deleted alongside with the
      data. A side effect of this, for example, `debug reload noflush` did not flush the data but
      did flush the functions, `debug loadaof` flush the data but not the functions.
      This PR move functions deletion into `emptyDb`. `emptyDb` (renamed to `emptyData`) will
      now accept an additional flag, `NOFUNCTIONS` which specifically indicate that we do not
      want to flush the functions (on all other cases, functions will be flushed). Used the new flag
      on FLUSHALL and FLUSHDB only! Tests were added to `debug reload` and `debug loadaof`
      to verify that functions behave the same as the data.
      
      Notice that because now functions will be deleted along side with the data we can not allow
      `CLUSTER RESET` to be called from within a function (it will cause the function to be released
      while running), this PR adds `NO_SCRIPT` flag to `CLUSTER RESET`  so it will not be possible
      to be called from within a function. The other cluster commands are allowed from within a
      function (there are use-cases that uses `GETKEYSINSLOT` to iterate over all the keys on a
      given slot). Tests was added to verify `CLUSTER RESET` is denied from within a script.
      
      Another small change on this PR is that `RDBFLAGS_ALLOW_DUP` is also applicable on functions.
      When loading functions, if this flag is set, we will replace old functions with new ones on collisions. 
      3bcf1084
    • zhugezy's avatar
      Remove EVAL script verbatim replication, propagation, and deterministic execution logic (#9812) · 1b0968df
      zhugezy authored
      
      
      # Background
      
      The main goal of this PR is to remove relevant logics on Lua script verbatim replication,
      only keeping effects replication logic, which has been set as default since Redis 5.0.
      As a result, Lua in Redis 7.0 would be acting the same as Redis 6.0 with default
      configuration from users' point of view.
      
      There are lots of reasons to remove verbatim replication.
      Antirez has listed some of the benefits in Issue #5292:
      
      >1. No longer need to explain to users side effects into scripts.
          They can do whatever they want.
      >2. No need for a cache about scripts that we sent or not to the slaves.
      >3. No need to sort the output of certain commands inside scripts
          (SMEMBERS and others): this both simplifies and gains speed.
      >4. No need to store scripts inside the RDB file in order to startup correctly.
      >5. No problems about evicting keys during the script execution.
      
      When looking back at Redis 5.0, antirez and core team decided to set the config
      `lua-replicate-commands yes` by default instead of removing verbatim replication
      directly, in case some bad situations happened. 3 years later now before Redis 7.0,
      it's time to remove it formally.
      
      # Changes
      
      - configuration for lua-replicate-commands removed
        - created config file stub for backward compatibility
      - Replication script cache removed
        - this is useless under script effects replication
        - relevant statistics also removed
      - script persistence in RDB files is also removed
      - Propagation of SCRIPT LOAD and SCRIPT FLUSH to replica / AOF removed
      - Deterministic execution logic in scripts removed (i.e. don't run write commands
        after random ones, and sorting output of commands with random order)
        - the flags indicating which commands have non-deterministic results are kept as hints to clients.
      - `redis.replicate_commands()` & `redis.set_repl()` changed
        - now `redis.replicate_commands()` does nothing and return an 1
        - ...and then `redis.set_repl()` can be issued before `redis.replicate_commands()` now
      - Relevant TCL cases adjusted
      - DEBUG lua-always-replicate-commands removed
      
      # Other changes
      - Fix a recent bug comparing CLIENT_ID_AOF to original_client->flags instead of id. (introduced in #9780)
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      1b0968df
  2. 19 Dec, 2021 1 commit
    • YaacovHazan's avatar
      Protected configs and sensitive commands (#9920) · ae2f5b7b
      YaacovHazan authored
      Block sensitive configs and commands by default.
      
      * `enable-protected-configs` - block modification of configs with the new `PROTECTED_CONFIG` flag.
         Currently we add this flag to `dbfilename`, and `dir` configs,
         all of which are non-mutable configs that can set a file redis will write to.
      * `enable-debug-command` - block the `DEBUG` command
      * `enable-module-command` - block the `MODULE` command
      
      These have a default value set to `no`, so that these features are not
      exposed by default to client connections, and can only be set by modifying the config file.
      
      Users can change each of these to either `yes` (allow all access), or `local` (allow access from
      local TCP connections and unix domain connections)
      
      Note that this is a **breaking change** (specifically the part about MODULE command being disabled by default).
      I.e. we don't consider DEBUG command being blocked as an issue (people shouldn't have been using it),
      and the few configs we protected are unlikely to have been set at runtime anyway.
      On the other hand, it's likely to assume some users who use modules, load them from the config file anyway.
      Note that's the whole point of this PR, for redis to be more secure by default and reduce the attack surface on
      innocent users, so secure defaults will necessarily mean a breaking change.
      ae2f5b7b
  3. 17 Dec, 2021 1 commit
    • ny0312's avatar
      Introduce memory management on cluster link buffers (#9774) · 792afb44
      ny0312 authored
      Introduce memory management on cluster link buffers:
       * Introduce a new `cluster-link-sendbuf-limit` config that caps memory usage of cluster bus link send buffers.
       * Introduce a new `CLUSTER LINKS` command that displays current TCP links to/from peers.
       * Introduce a new `mem_cluster_links` field under `INFO` command output, which displays the overall memory usage by all current cluster links.
       * Introduce a new `total_cluster_links_buffer_limit_exceeded` field under `CLUSTER INFO` command output, which displays the accumulated count of cluster links freed due to `cluster-link-sendbuf-limit`.
      792afb44
  4. 16 Dec, 2021 2 commits
    • Meir Shpilraien (Spielrein)'s avatar
      Add FUNCTION FLUSH command to flush all functions (#9936) · 687210f1
      Meir Shpilraien (Spielrein) authored
      Added `FUNCTION FLUSH` command. The new sub-command allows delete all the functions.
      An optional `[SYNC|ASYNC]` argument can be given to control whether or not to flush the
      functions synchronously or asynchronously. if not given the default flush mode is chosen by
      `lazyfree-lazy-user-flush` configuration values.
      
      Add the missing `functions.tcl` test to the list of tests that are executed in test_helper.tcl,
      and call FUNCTION FLUSH in between servers in external mode
      687210f1
    • yoav-steinberg's avatar
      Multiparam config get. (#9914) · 70ff26b4
      yoav-steinberg authored
      Support doing `CONFIG GET <x> <y> <z>`, each of them can also be
      a pattern with wildcards.
      
      This avoids duplicates in the result by looping over the configs and for
      each once checking all the patterns, once a match is found for a pattern
      we move on to the next config.
      70ff26b4
  5. 15 Dec, 2021 1 commit
    • guybe7's avatar
      Auto-generate the command table from JSON files (#9656) · 86781600
      guybe7 authored
      Delete the hardcoded command table and replace it with an auto-generated table, based
      on a JSON file that describes the commands (each command must have a JSON file).
      
      These JSON files are the SSOT of everything there is to know about Redis commands,
      and it is reflected fully in COMMAND INFO.
      
      These JSON files are used to generate commands.c (using a python script), which is then
      committed to the repo and compiled.
      
      The purpose is:
      * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
      * drop the dependency between Redis-user and the commands.json in redis-doc.
      * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
        done in a separate PR)
      * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
        artifacts should be a large JSON, containing all the information about all of the commands, which will be
        generated from COMMAND's reply)
      * the byproduct of this is:
        * module commands will be able to provide that info and possibly be more of a first-class citizens
        * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
      
      ### Interface changes
      
      #### COMMAND INFO's reply change (and arg-less COMMAND)
      
      Before this commit the reply at index 7 contained the key-specs list
      and reply at index 8 contained the sub-commands list (Both unreleased).
      Now, reply at index 7 is a map of:
      - summary - short command description
      - since - debut version
      - group - command group
      - complexity - complexity string
      - doc-flags - flags used for documentation (e.g. "deprecated")
      - deprecated-since - if deprecated, from which version?
      - replaced-by - if deprecated, which command replaced it?
      - history - a list of (version, what-changed) tuples
      - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
      - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
      - key-specs - an array of keys specs (already in unstable, just changed location)
      - subcommands - a list of sub-commands (already in unstable, just changed location)
      - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
      
      more details on these can be found in https://github.com/redis/redis-doc/pull/1697
      
      only the first three fields are mandatory 
      
      #### API changes (unreleased API obviously)
      
      now they take RedisModuleCommand opaque pointer instead of looking up the command by name
      
      - RM_CreateSubcommand
      - RM_AddCommandKeySpec
      - RM_SetCommandKeySpecBeginSearchIndex
      - RM_SetCommandKeySpecBeginSearchKeyword
      - RM_SetCommandKeySpecFindKeysRange
      - RM_SetCommandKeySpecFindKeysKeynum
      
      Currently, we did not add module API to provide additional information about their commands because
      we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944
      
      .
      
      ### Somehow related changes
      1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
         will be documented with M|KM|FT|MI and can take both lowercase and uppercase
      
      ### Unrelated changes
      1. Bugfix: no_madaory_keys was absent in COMMAND's reply
      2. expose CMD_MODULE as "module" via COMMAND
      3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
      Co-authored-by: default avatarItamar Haber <itamar@garantiadata.com>
      86781600