1. 09 Nov, 2022 1 commit
    • Viktor Söderqvist's avatar
      Listpack encoding for sets (#11290) · 4e472a1a
      Viktor Söderqvist authored
      Small sets with not only integer elements are listpack encoded, by default
      up to 128 elements, max 64 bytes per element, new config `set-max-listpack-entries`
      and `set-max-listpack-value`. This saves memory for small sets compared to using a hashtable.
      
      Sets with only integers, even very small sets, are still intset encoded (up to 1G
      limit, etc.). Larger sets are hashtable encoded.
      
      This PR increments the RDB version, and has an effect on OBJECT ENCODING
      
      Possible conversions when elements are added:
      
          intset -> listpack
          listpack -> hashtable
          intset -> hashtable
      
      Note: No conversion happens when elements are deleted. If all elements are
      deleted and then added again, the set is deleted and recreated, thus implicitly
      converted to a smaller encoding.
      4e472a1a
  2. 09 Sep, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_zset (#9366) · 3ca6972e
      sundb authored
      Part two of implementing #8702 (zset), after #8887.
      
      ## Description of the feature
      Replaced all uses of ziplist with listpack in t_zset, and optimized some of the code to optimize performance.
      
      ## Rdb format changes
      New `RDB_TYPE_ZSET_LISTPACK` rdb type.
      
      ## Rdb loading improvements:
      1) Pre-expansion of dict for validation of duplicate data for listpack and ziplist.
      2) Simplifying the release of empty key objects when RDB loading.
      3) Unify ziplist and listpack data verify methods for zset and hash, and move code to rdb.c.
      
      ## Interface changes
      1) New `zset-max-listpack-entries` config is an alias for `zset-max-ziplist-entries` (same with `zset-max-listpack-value`).
      2) OBJECT ENCODING will return listpack instead of ziplist.
      
      ## Listpack improvements:
      1) Add `lpDeleteRange` and `lpDeleteRangeWithEntry` functions to delete a range of entries from listpack.
      2) Improve the performance of `lpCompare`, converting from string to integer is faster than converting from integer to string.
      3) Replace `snprintf` with `ll2string` to improve performance in converting numbers to strings in `lpGet()`.
      
      ## Zset improvements:
      1) Improve the performance of `zzlFind` method, use `lpFind` instead of `lpCompare` in a loop.
      2) Use `lpDeleteRangeWithEntry` instead of `lpDelete` twice to delete a element of zset.
      
      ## Tests
      1) Add some unittests for `lpDeleteRange` and `lpDeleteRangeWithEntry` function.
      2) Add zset RDB loading test.
      3) Add benchmark test for `lpCompare` and `ziplsitCompare`.
      4) Add empty listpack zset corrupt dump test.
      3ca6972e
  3. 10 Aug, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_hash (#8887) · 02fd76b9
      sundb authored
      
      
      Part one of implementing #8702 (taking hashes first before other types)
      
      ## Description of the feature
      1. Change ziplist encoded hash objects to listpack encoding.
      2. Convert existing ziplists on RDB loading time. an O(n) operation.
      
      ## Rdb format changes
      1. Add RDB_TYPE_HASH_LISTPACK rdb type.
      2. Bump RDB_VERSION to 10
      
      ## Interface changes
      1. New `hash-max-listpack-entries` config is an alias for `hash-max-ziplist-entries` (same with `hash-max-listpack-value`)
      2. OBJECT ENCODING will return `listpack` instead of `ziplist`
      
      ## Listpack improvements:
      1. Support direct insert, replace integer element (rather than convert back and forth from string)
      3. Add more listpack capabilities to match the ziplist ones (like `lpFind`, `lpRandomPairs` and such)
      4. Optimize element length fetching, avoid multiple calculations
      5. Use inline to avoid function call overhead.
      
      ## Tests
      1. Add a new test to the RDB load time conversion
      2. Adding the listpack unit tests. (based on the one in ziplist.c)
      3. Add a few "corrupt payload: fuzzer findings" tests, and slightly modify existing ones.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      02fd76b9
  4. 09 Jun, 2021 1 commit
    • Yossi Gottlieb's avatar
      Improve test suite to handle external servers better. (#9033) · 8a86bca5
      Yossi Gottlieb authored
      This commit revives the improves the ability to run the test suite against
      external servers, instead of launching and managing `redis-server` processes as
      part of the test fixture.
      
      This capability existed in the past, using the `--host` and `--port` options.
      However, it was quite limited and mostly useful when running a specific tests.
      Attempting to run larger chunks of the test suite experienced many issues:
      
      * Many tests depend on being able to start and control `redis-server` themselves,
      and there's no clear distinction between external server compatible and other
      tests.
      * Cluster mode is not supported (resulting with `CROSSSLOT` errors).
      
      This PR cleans up many things and makes it possible to run the entire test suite
      against an external server. It also provides more fine grained controls to
      handle cases where the external server supports a subset of the Redis commands,
      limited number of databases, cluster mode, etc.
      
      The tests directory now contains a `README.md` file that describes how this
      works.
      
      This commit also includes additional cleanups and fixes:
      
      * Tests can now be tagged.
      * Tag-based selection is now unified across `start_server`, `tags` and `test`.
      * More information is provided about skipped or ignored tests.
      * Repeated patterns in tests have been extracted to common procedures, both at a
        global level and on a per-test file basis.
      * Cleaned up some cases where test setup was based on a previous test executing
        (a major anti-pattern that repeats itself in many places).
      * Cleaned up some cases where test teardown was not part of a test (in the
        future we should have dedicated teardown code that executes even when tests
        fail).
      * Fixed some tests that were flaky running on external servers.
      8a86bca5
  5. 17 Jan, 2021 1 commit
    • Yossi Gottlieb's avatar
      Add io-thread daily CI tests. (#8232) · 522d9360
      Yossi Gottlieb authored
      This adds basic coverage to IO threads by running the cluster and few selected Redis test suite tests with the IO threads enabled.
      
      Also provides some necessary additional improvements to the test suite:
      
      * Add --config to sentinel/cluster tests for arbitrary configuration.
      * Fix --tags whitelisting which was broken.
      * Add a `network` tag to some tests that are more network intensive. This is work in progress and more tests should be properly tagged in the future.
      522d9360
  6. 22 May, 2019 1 commit
    • Angus Pearson's avatar
      Implement `SCAN cursor [TYPE type]` modifier suggested in issue #6107. · bf963253
      Angus Pearson authored
      Add tests to check basic functionality of this optional keyword, and also tested with
      a module (redisgraph). Checked quickly with valgrind, no issues.
      
      Copies name the type name canonicalisation code from `typeCommand`, perhaps this would
      be better factored out to prevent the two diverging and both needing to be edited to
      add new `OBJ_*` types, but this is a little fiddly with C strings.
      
      The [redis-doc](https://github.com/antirez/redis-doc/blob/master/commands.json) repo
      will need to be updated with this new arg if accepted.
      
      A quirk to be aware of here is that the GEO commands are backed by zsets not their own
      type, so they're not distinguishable from other zsets.
      
      Additionally, for sparse types this has the same behaviour as `MATCH` in that it may
      return many empty results before giving something, even for large `COUNT`s.
      bf963253
  7. 14 Jun, 2018 1 commit
  8. 11 Jun, 2018 2 commits
  9. 03 Dec, 2014 1 commit
  10. 05 Nov, 2013 1 commit
  11. 31 Oct, 2013 2 commits
  12. 30 Oct, 2013 6 commits