1. 10 Sep, 2020 1 commit
  2. 01 Sep, 2020 11 commits
  3. 20 Jul, 2020 9 commits
    • WuYunlong's avatar
      Fix command help for unexpected options (#7476) · b1a01fda
      WuYunlong authored
      
      (cherry picked from commit 93bdbf5a)
      b1a01fda
    • Oran Agra's avatar
      fix recently added time sensitive tests failing with valgrind (#7512) · aea4db2f
      Oran Agra authored
      interestingly the latency monitor test fails because valgrind is slow
      enough so that the time inside PEXPIREAT command from the moment of
      the first mstime() call to get the basetime until checkAlreadyExpired
      calls mstime() again is more than 1ms, and that test was too sensitive.
      
      using this opportunity to speed up the test (unrelated to the failure)
      the fix is just the longer time passed to PEXPIRE.
      
      (cherry picked from commit e5227aab)
      aea4db2f
    • Yossi Gottlieb's avatar
      TLS: Session caching configuration support. (#7420) · 7a536c29
      Yossi Gottlieb authored
      * TLS: Session caching configuration support.
      * TLS: Remove redundant config initialization.
      
      (cherry picked from commit 3e6f2b1a)
      7a536c29
    • Oran Agra's avatar
      RESTORE ABSTTL won't store expired keys into the db (#7472) · 95ba01b5
      Oran Agra authored
      Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
      key and return success, RESTORE should not store key that are already
      expired into the db.
      When used together with REPLACE it should emit a DEL to keyspace
      notification and replication stream.
      
      (cherry picked from commit 5977a948)
      95ba01b5
    • Oran Agra's avatar
      skip a test that uses +inf on valgrind (#7440) · 33ca884c
      Oran Agra authored
      On some platforms strtold("+inf") with valgrind returns a non-inf result
      
      [err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
      Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
      
      (cherry picked from commit 909bc97c)
      33ca884c
    • Oran Agra's avatar
      stabilize tests that look for log lines (#7367) · 2b5f2319
      Oran Agra authored
      tests were sensitive to additional log lines appearing in the log
      causing the search to come empty handed.
      
      instead of just looking for the n last log lines, capture the log lines
      before performing the action, and then search from that offset.
      
      (cherry picked from commit 8e76e134)
      2b5f2319
    • antirez's avatar
      LPOS: option FIRST renamed RANK. · 17aaf5ec
      antirez authored
      (cherry picked from commit a5a3a7bb)
      17aaf5ec
    • Oran Agra's avatar
      EXEC always fails with EXECABORT and multi-state is cleared · 05e483cb
      Oran Agra authored
      In order to support the use of multi-exec in pipeline, it is important that
      MULTI and EXEC are never rejected and it is easy for the client to know if the
      connection is still in multi state.
      
      It was easy to make sure MULTI and DISCARD never fail (done by previous
      commits) since these only change the client state and don't do any actual
      change in the server, but EXEC is a different story.
      
      Since in the past, it was possible for clients to handle some EXEC errors and
      retry the EXEC, we now can't affort to return any error on EXEC other than
      EXECABORT, which now carries with it the real reason for the abort too.
      
      Other fixes in this commit:
      - Some checks that where performed at the time of queuing need to be re-
        validated when EXEC runs, for instance if the transaction contains writes
        commands, it needs to be aborted. there was one check that was already done
        in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
        -NOREPLICAS, -MASTERDOWN
      - When a command is rejected by processCommand it was rejected with addReply,
        which was not recognized as an error in case the bad command came from the
        master. this will enable to count or MONITOR these errors in the future.
      - make it easier for tests to create additional (non deferred) clients.
      - add tests for the fixes of this commit.
      
      (cherry picked from commit 65a3307b)
      05e483cb
    • meir@redislabs.com's avatar
      Fix RM_ScanKey module api not to return int encoded strings · 51e17845
      meir@redislabs.com authored
      The scan key module API provides the scan callback with the current
      field name and value (if it exists). Those arguments are RedisModuleString*
      which means it supposes to point to robj which is encoded as a string.
      Using createStringObjectFromLongLong function might return robj that
      points to an integer and so break a module that tries for example to
      use RedisModule_StringPtrLen on the given field/value.
      
      The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
      Using those function promise that the field and value pass to the to the
      scan callback will be Strings.
      
      The PR also changes the Scan test module to use RedisModule_StringPtrLen
      to catch the issue. without this, the issue is hidden because
      RedisModule_ReplyWithString knows to handle integer encoding of the
      given robj (RedisModuleString).
      
      The PR also introduces a new test to verify the issue is solved.
      
      (cherry picked from commit a89bf734)
      51e17845
  4. 12 Jun, 2020 1 commit
  5. 09 Jun, 2020 2 commits
  6. 28 May, 2020 1 commit
    • Oran Agra's avatar
      tests: each test client work on a distinct port range · a2ae4635
      Oran Agra authored
      apparently when running tests in parallel (the default of --clients 16),
      there's a chance for two tests to use the same port.
      specifically, one test might shutdown a master and still have the
      replica up, and then another test will re-use the port number of master
      for another master, and then that replica will connect to the master of
      the other test.
      
      this can cause a master to count too many full syncs and fail a test if
      we run the tests with --single integration/psync2 --loop --stop
      
      see Probmem 2 in #7314
      a2ae4635
  7. 22 May, 2020 1 commit
    • Oran Agra's avatar
      fix a rare active defrag edge case bug leading to stagnation · 436be349
      Oran Agra authored
      There's a rare case which leads to stagnation in the defragger, causing
      it to keep scanning the keyspace and do nothing (not moving any
      allocation), this happens when all the allocator slabs of a certain bin
      have the same % utilization, but the slab from which new allocations are
      made have a lower utilization.
      
      this commit fixes it by removing the current slab from the overall
      average utilization of the bin, and also eliminate any precision loss in
      the utilization calculation and move the decision about the defrag to
      reside inside jemalloc.
      
      and also add a test that consistently reproduce this issue.
      436be349
  8. 15 May, 2020 1 commit
    • Yossi Gottlieb's avatar
      TLS: Fix test failures on recent Debian/Ubuntu. · 16ba33c0
      Yossi Gottlieb authored
      Seems like on some systems choosing specific TLS v1/v1.1 versions no
      longer works as expected. Test is reduced for v1.2 now which is still
      good enough to test the mechansim, and matters most anyway.
      16ba33c0
  9. 14 May, 2020 1 commit
  10. 08 May, 2020 1 commit
    • zhenwei pi's avatar
      Support setcpuaffinity on linux/bsd · d6436eb7
      zhenwei pi authored
      Currently, there are several types of threads/child processes of a
      redis server. Sometimes we need deeply optimise the performance of
      redis, so we would like to isolate threads/processes.
      
      There were some discussion about cpu affinity cases in the issue:
      https://github.com/antirez/redis/issues/2863
      
      
      
      So implement cpu affinity setting by redis.conf in this patch, then
      we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
      bgsave_cpulist by cpu list.
      
      Examples of cpulist in redis.conf:
      server_cpulist 0-7:2      means cpu affinity 0,2,4,6
      bio_cpulist 1,3           means cpu affinity 1,3
      aof_rewrite_cpulist 8-11  means cpu affinity 8,9,10,11
      bgsave_cpulist 1,10-11    means cpu affinity 1,10,11
      
      Test on linux/freebsd, both work fine.
      Signed-off-by: default avatarzhenwei pi <pizhenwei@bytedance.com>
      d6436eb7
  11. 30 Apr, 2020 1 commit
  12. 27 Apr, 2020 1 commit
  13. 24 Apr, 2020 3 commits
    • antirez's avatar
      LCS -> STRALGO LCS. · 3722f89f
      antirez authored
      STRALGO should be a container for mostly read-only string
      algorithms in Redis. The algorithms should have two main
      characteristics:
      
      1. They should be non trivial to compute, and often not part of
      programming language standard libraries.
      2. They should be fast enough that it is a good idea to have optimized C
      implementations.
      
      Next thing I would love to see? A small strings compression algorithm.
      3722f89f
    • antirez's avatar
      Tracking: test expired keys notifications. · 06917e58
      antirez authored
      06917e58
    • antirez's avatar
      Tracking: NOLOOP tests. · e434b2ce
      antirez authored
      e434b2ce
  14. 17 Apr, 2020 1 commit
    • Oran Agra's avatar
      testsuite run the defrag latency test solo · 6148f949
      Oran Agra authored
      this test is time sensitive and it sometimes fail to pass below the
      latency threshold, even on strong machines.
      
      this test was the reson we're running just 2 parallel tests in the
      github actions CI, revering this.
      6148f949
  15. 07 Apr, 2020 5 commits