1. 12 Dec, 2022 1 commit
  2. 20 Jun, 2022 1 commit
    • Tian's avatar
      Fsync directory while persisting AOF manifest, RDB file, and config file (#10737) · 99a425d0
      Tian authored
      The current process to persist files is `write` the data, `fsync` and `rename` the file,
      but a underlying problem is that the rename may be lost when a sudden crash like
      power outage and the directory hasn't been persisted.
      
      The article [Ensuring data reaches disk](https://lwn.net/Articles/457667/) mentions
      a safe way to update file should be:
      
      1. create a new temp file (on the same file system!)
      2. write data to the temp file
      3. fsync() the temp file
      4. rename the temp file to the appropriate name
      5. fsync() the containing directory
      
      This commit handles CONFIG REWRITE, AOF manifest, and RDB file (both for persistence,
      and the one the replica gets from the master).
      It doesn't handle (yet), ACL SAVE and Cluster configs, since these don't yet follow this pattern.
      99a425d0
  3. 17 Apr, 2022 1 commit
    • Oran Agra's avatar
      Optimize integer zset scores in listpack (converting to string and back) (#10486) · 0c4733c8
      Oran Agra authored
      When the score doesn't have fractional part, and can be stored as an integer,
      we use the integer capabilities of listpack to store it, rather than convert it to string.
      This already existed before this PR (lpInsert dose that conversion implicitly).
      
      But to do that, we would have first converted the score from double to string (calling `d2string`),
      then pass the string to `lpAppend` which identified it as being an integer and convert it back to an int.
      Now, instead of converting it to a string, we store it using lpAppendInteger`.
      
      Unrelated:
      ---
      * Fix the double2ll range check (negative and positive ranges, and also the comparison operands
        were slightly off. but also, the range could be made much larger, see comment).
      * Unify the double to string conversion code in rdb.c with the one in util.c
      * Small optimization in lpStringToInt64, don't attempt to convert strings that are obviously too long.
      
      Benchmark;
      ---
      Up to 20% improvement in certain tight loops doing zzlInsert with large integers.
      (if listpack is pre-allocated to avoid realloc, and insertion is sorted from largest to smaller)
      0c4733c8
  4. 30 Mar, 2022 1 commit
    • Nick Chun's avatar
      Module Configurations (#10285) · bda9d74d
      Nick Chun authored
      
      
      This feature adds the ability to add four different types (Bool, Numeric,
      String, Enum) of configurations to a module to be accessed via the redis
      config file, and the CONFIG command.
      
      **Configuration Names**:
      
      We impose a restriction that a module configuration always starts with the
      module name and contains a '.' followed by the config name. If a module passes
      "config1" as the name to a register function, it will be registered as MODULENAME.config1.
      
      **Configuration Persistence**:
      
      Module Configurations exist only as long as a module is loaded. If a module is
      unloaded, the configurations are removed.
      There is now also a minimal core API for removal of standardConfig objects
      from configs by name.
      
      **Get and Set Callbacks**:
      
      Storage of config values is owned by the module that registers them, and provides
      callbacks for Redis to access and manipulate the values.
      This is exposed through a GET and SET callback.
      
      The get callback returns a typed value of the config to redis. The callback takes
      the name of the configuration, and also a privdata pointer. Note that these only
      take the CONFIGNAME portion of the config, not the entire MODULENAME.CONFIGNAME.
      
      ```
       typedef RedisModuleString * (*RedisModuleConfigGetStringFunc)(const char *name, void *privdata);
       typedef long long (*RedisModuleConfigGetNumericFunc)(const char *name, void *privdata);
       typedef int (*RedisModuleConfigGetBoolFunc)(const char *name, void *privdata);
       typedef int (*RedisModuleConfigGetEnumFunc)(const char *name, void *privdata);
      ```
      
      Configs must also must specify a set callback, i.e. what to do on a CONFIG SET XYZ 123
      or when loading configurations from cli/.conf file matching these typedefs. *name* is
      again just the CONFIGNAME portion, *val* is the parsed value from the core,
      *privdata* is the registration time privdata pointer, and *err* is for providing errors to a client.
      
      ```
      typedef int (*RedisModuleConfigSetStringFunc)(const char *name, RedisModuleString *val, void *privdata, RedisModuleString **err);
      typedef int (*RedisModuleConfigSetNumericFunc)(const char *name, long long val, void *privdata, RedisModuleString **err);
      typedef int (*RedisModuleConfigSetBoolFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
      typedef int (*RedisModuleConfigSetEnumFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
      ```
      
      Modules can also specify an optional apply callback that will be called after
      value(s) have been set via CONFIG SET:
      
      ```
      typedef int (*RedisModuleConfigApplyFunc)(RedisModuleCtx *ctx, void *privdata, RedisModuleString **err);
      ```
      
      **Flags:**
      We expose 7 new flags to the module, which are used as part of the config registration.
      
      ```
      #define REDISMODULE_CONFIG_MODIFIABLE 0 /* This is the default for a module config. */
      #define REDISMODULE_CONFIG_IMMUTABLE (1ULL<<0) /* Can this value only be set at startup? */
      #define REDISMODULE_CONFIG_SENSITIVE (1ULL<<1) /* Does this value contain sensitive information */
      #define REDISMODULE_CONFIG_HIDDEN (1ULL<<4) /* This config is hidden in `config get <pattern>` (used for tests/debugging) */
      #define REDISMODULE_CONFIG_PROTECTED (1ULL<<5) /* Becomes immutable if enable-protected-configs is enabled. */
      #define REDISMODULE_CONFIG_DENY_LOADING (1ULL<<6) /* This config is forbidden during loading. */
      /* Numeric Specific Configs */
      #define REDISMODULE_CONFIG_MEMORY (1ULL<<7) /* Indicates if this value can be set as a memory value */
      ```
      
      **Module Registration APIs**:
      
      ```
      int (*RedisModule_RegisterBoolConfig)(RedisModuleCtx *ctx, char *name, int default_val, unsigned int flags, RedisModuleConfigGetBoolFunc getfn, RedisModuleConfigSetBoolFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
      int (*RedisModule_RegisterNumericConfig)(RedisModuleCtx *ctx, const char *name, long long default_val, unsigned int flags, long long min, long long max, RedisModuleConfigGetNumericFunc getfn, RedisModuleConfigSetNumericFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
      int (*RedisModule_RegisterStringConfig)(RedisModuleCtx *ctx, const char *name, const char *default_val, unsigned int flags, RedisModuleConfigGetStringFunc getfn, RedisModuleConfigSetStringFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
      int (*RedisModule_RegisterEnumConfig)(RedisModuleCtx *ctx, const char *name, int default_val, unsigned int flags, const char **enum_values, const int *int_values, int num_enum_vals, RedisModuleConfigGetEnumFunc getfn, RedisModuleConfigSetEnumFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
      int (*RedisModule_LoadConfigs)(RedisModuleCtx *ctx);
      ```
      
      The module name will be auto appended along with a "." to the front of the name of the config.
      
      **What RM_Register[...]Config does**:
      
      A RedisModule struct now keeps a list of ModuleConfig objects which look like:
      ```
      typedef struct ModuleConfig {
          sds name; /* Name of config without the module name appended to the front */
          void *privdata; /* Optional data passed into the module config callbacks */
          union get_fn { /* The get callback specificed by the module */
              RedisModuleConfigGetStringFunc get_string;
              RedisModuleConfigGetNumericFunc get_numeric;
              RedisModuleConfigGetBoolFunc get_bool;
              RedisModuleConfigGetEnumFunc get_enum;
          } get_fn;
          union set_fn { /* The set callback specified by the module */
              RedisModuleConfigSetStringFunc set_string;
              RedisModuleConfigSetNumericFunc set_numeric;
              RedisModuleConfigSetBoolFunc set_bool;
              RedisModuleConfigSetEnumFunc set_enum;
          } set_fn;
          RedisModuleConfigApplyFunc apply_fn;
          RedisModule *module;
      } ModuleConfig;
      ```
      It also registers a standardConfig in the configs array, with a pointer to the
      ModuleConfig object associated with it.
      
      **What happens on a CONFIG GET/SET MODULENAME.MODULECONFIG:**
      
      For CONFIG SET, we do the same parsing as is done in config.c and pass that
      as the argument to the module set callback. For CONFIG GET, we call the
      module get callback and return that value to config.c to return to a client.
      
      **CONFIG REWRITE**:
      
      Starting up a server with module configurations in a .conf file but no module load
      directive will fail. The flip side is also true, specifying a module load and a bunch
      of module configurations will load those configurations in using the module defined
      set callbacks on a RM_LoadConfigs call. Configs being rewritten works the same
      way as it does for standard configs, as the module has the ability to specify a
      default value. If a module is unloaded with configurations specified in the .conf file
      those configurations will be commented out from the .conf file on the next config rewrite.
      
      **RM_LoadConfigs:**
      
      `RedisModule_LoadConfigs(RedisModuleCtx *ctx);`
      
      This last API is used to make configs available within the onLoad() after they have
      been registered. The expected usage is that a module will register all of its configs,
      then call LoadConfigs to trigger all of the set callbacks, and then can error out if any
      of them were malformed. LoadConfigs will attempt to set all configs registered to
      either a .conf file argument/loadex argument or their default value if an argument is
      not specified. **LoadConfigs is a required function if configs are registered.
      ** Also note that LoadConfigs **does not** call the apply callbacks, but a module
      can do that directly after the LoadConfigs call.
      
      **New Command: MODULE LOADEX [CONFIG NAME VALUE] [ARGS ...]:**
      
      This command provides the ability to provide startup context information to a module.
      LOADEX stands for "load extended" similar to GETEX. Note that provided config
      names need the full MODULENAME.MODULECONFIG name. Any additional
      arguments a module might want are intended to be specified after ARGS.
      Everything after ARGS is passed to onLoad as RedisModuleString **argv.
      Co-authored-by: default avatarMadelyn Olson <madelyneolson@gmail.com>
      Co-authored-by: default avatarMadelyn Olson <matolson@amazon.com>
      Co-authored-by: default avatarsundb <sundbcn@gmail.com>
      Co-authored-by: default avatarMadelyn Olson <34459052+madolson@users.noreply.github.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarYossi Gottlieb <yossigo@gmail.com>
      bda9d74d
  5. 28 Mar, 2022 1 commit
    • Oran Agra's avatar
      introduce MAX_D2STRING_CHARS instead of 128 const (#10487) · 14b19886
      Oran Agra authored
      There are a few places that use a hard coded const of 128 to allocate a buffer for d2string.
      Replace these with a clear macro.
      Note that In theory, converting double into string could take as much as nearly 400 chars,
      but since d2string uses `%g` and not `%f`, it won't pass some 40 chars.
      
      unrelated:
      restore some changes to auto generated commands.c that got accidentally reverted in #10293
      14b19886
  6. 14 Mar, 2022 1 commit
  7. 18 Jan, 2022 1 commit
    • Yossi Gottlieb's avatar
      Fix additional AOF filename issues. (#10110) · 25e6d4d4
      Yossi Gottlieb authored
      This extends the previous fix (#10049) to address any form of
      non-printable or whitespace character (including newlines, quotes,
      non-printables, etc.)
      
      Also, removes the limitation on appenddirname, to align with the way
      filenames are handled elsewhere in Redis.
      25e6d4d4
  8. 10 Jan, 2022 2 commits
  9. 03 Jan, 2022 1 commit
    • chenyang8094's avatar
      Implement Multi Part AOF mechanism to avoid AOFRW overheads. (#9788) · 87789fae
      chenyang8094 authored
      
      
      Implement Multi-Part AOF mechanism to avoid overheads during AOFRW.
      Introducing a folder with multiple AOF files tracked by a manifest file.
      
      The main issues with the the original AOFRW mechanism are:
      * buffering of commands that are processed during rewrite (consuming a lot of RAM)
      * freezes of the main process when the AOFRW completes to drain the remaining part of the buffer and fsync it.
      * double disk IO for the data that arrives during AOFRW (had to be written to both the old and new AOF files)
      
      The main modifications of this PR:
      1. Remove the AOF rewrite buffer and related code.
      2. Divide the AOF into multiple files, they are classified as two types, one is the the `BASE` type,
        it represents the full amount of data (Maybe AOF or RDB format) after each AOFRW, there is only
        one `BASE` file at most. The second is `INCR` type, may have more than one. They represent the
        incremental commands since the last AOFRW.
      3. Use a AOF manifest file to record and manage these AOF files mentioned above.
      4. The original configuration of `appendfilename` will be the base part of the new file name, for example:
        `appendonly.aof.1.base.rdb` and `appendonly.aof.2.incr.aof`
      5. Add manifest-related TCL tests, and modified some existing tests that depend on the `appendfilename`
      6. Remove the `aof_rewrite_buffer_length` field in info.
      7. Add `aof-disable-auto-gc` configuration. By default we're automatically deleting HISTORY type AOFs.
        It also gives users the opportunity to preserve the history AOFs. just for testing use now.
      8. Add AOFRW limiting measure. When the AOFRW failures reaches the threshold (3 times now),
        we will delay the execution of the next AOFRW by 1 minute. If the next AOFRW also fails, it will be
        delayed by 2 minutes. The next is 4, 8, 16, the maximum delay is 60 minutes (1 hour). During the limit
        period, we can still use the 'bgrewriteaof' command to execute AOFRW immediately.
      9. Support upgrade (load) data from old version redis.
      10. Add `appenddirname` configuration, as the directory name of the append only files. All AOF files and
        manifest file will be placed in this directory.
      11. Only the last AOF file (BASE or INCR) can be truncated. Otherwise redis will exit even if
        `aof-load-truncated` is enabled.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      87789fae
  10. 16 Nov, 2021 1 commit
  11. 23 Aug, 2021 1 commit
    • Wen Hui's avatar
      config memory limits: handle values larger than (signed) LLONG_MAX (#9313) · 641780a9
      Wen Hui authored
      This aims to solve the issue in CONFIG SET maxmemory can only set maxmemory to up
      to 9223372036854775807 (2^63) while the maxmemory should be ULLONG.
      Added a memtoull function to convert a string representing an amount of memory
      into the number of bytes (similar to memtoll but for ull). Also added ull2string to
      convert a ULLong to string (Similar to ll2string).
      641780a9
  12. 10 Jun, 2021 1 commit
    • Binbin's avatar
      Fixed some typos, add a spell check ci and others minor fix (#8890) · 0bfccc55
      Binbin authored
      This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
      This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
      but at least it is also unlikely to cause false positives.
      
      Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
      
      Here's a summary of other changes:
      1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
      2. Outdated function / variable / argument names in comments
      3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
      4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
      5. Some outdated https link URLs.
      6. Fix some outdated comment. Such as:
          - In README: about the rdb, we used to said create a `thread`, change to `process`
          - dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
          - notifyKeyspaceEvent fucntion comment (add type arg)
          - Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
      7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
      0bfccc55
  13. 10 Mar, 2021 1 commit
    • sundb's avatar
      Add run all test support with define REDIS_TEST (#8570) · 95d6297d
      sundb authored
      1. Add `redis-server test all` support to run all tests.
      2. Add redis test to daily ci.
      3. Add `--accurate` option to run slow tests for more iterations (so that
         by default we run less cycles (shorter time, and less prints).
      4. Move dict benchmark to REDIS_TEST.
      5. fix some leaks in tests
      6. make quicklist tests run on a specific fill set of options rather than huge ranges
      7. move some prints in quicklist test outside their loops to reduce prints
      8. removing sds.h from dict.c since it is now used in both redis-server and
         redis-cli (uses hiredis sds)
      95d6297d
  14. 15 Feb, 2021 1 commit
  15. 18 Jan, 2021 1 commit
  16. 04 Nov, 2019 1 commit
    • Oran Agra's avatar
      Add RM_ServerInfoGetFieldUnsigned · 04233097
      Oran Agra authored
      rename RM_ServerInfoGetFieldNumerical RM_ServerInfoGetFieldSigned
      move string2ull to util.c
      fix leak in RM_GetServerInfo when duplicate info fields exist
      04233097
  17. 03 Nov, 2019 2 commits
    • Oran Agra's avatar
      Module API for loading and saving long double · 779aebc9
      Oran Agra authored
      looks like each platform implements long double differently (different bit count)
      so we can't save them as binary, and we also want to avoid creating a new RDB
      format version, so we save these are hex strings using "%La".
      
      This commit includes a change in the arguments of ld2string to support this.
      as well as tests for coverage and short reads.
      
      coded by @guybe7
      779aebc9
    • Oran Agra's avatar
      Add module api for looking into INFO fields · 4d580438
      Oran Agra authored
      - Add RM_GetServerInfo and friends
      - Add auto memory for new opaque struct
      - Add tests for new APIs
      
      other minor fixes:
      - add const in various char pointers
      - requested_section in modulesCollectInfo was actually not sds but char*
      - extract new string2d out of getDoubleFromObject for code reuse
      
      Add module API for
      4d580438
  18. 11 Dec, 2018 1 commit
  19. 26 Oct, 2018 1 commit
    • David Carlier's avatar
      Fix non Linux build. · 0b73d0a8
      David Carlier authored
      timezone global is a linux-ism whereas it is a function under BSD.
      Here a helper to get the timezone value in a more portable manner.
      0b73d0a8
  20. 11 Jan, 2017 1 commit
  21. 04 Nov, 2015 1 commit
    • antirez's avatar
      Fix HINCRBYFLOAT to work with long doubles. · 71aa9b75
      antirez authored
      During the refactoring needed for lazy free, specifically the conversion
      of t_hash from struct robj to plain SDS strings, HINCRBFLOAT was
      accidentally moved away from long doubles to doubles for internal
      processing of increments and formatting.
      
      The diminished precision created more obvious artifacts in the way small
      numbers are formatted once we convert from decimal number in radix 10 to
      double and back to its string in radix 10.
      
      By using more precision, we now have less surprising results at least
      with small numbers like "1.23", exactly like in the previous versions of
      Redis.
      
      See issue #2846.
      71aa9b75
  22. 01 Oct, 2015 2 commits
  23. 27 Feb, 2015 2 commits
  24. 23 Dec, 2014 1 commit
    • Matt Stancliff's avatar
      Allow all code tests to run using Redis args · 8febcffd
      Matt Stancliff authored
      Previously, many files had individual main() functions for testing,
      but each required being compiled with their own testing flags.
      That gets difficult when you have 8 different flags you need
      to set just to run all tests (plus, some test files required
      other files to be compiled aaginst them, and it seems some didn't
      build at all without including the rest of Redis).
      
      Now all individual test main() funcions are renamed to a test
      function for the file itself and one global REDIS_TEST define enables
      testing across the entire codebase.
      
      Tests can now be run with:
        - `./redis-server test <test>`
      
        e.g. ./redis-server test ziplist
      
      If REDIS_TEST is not defined, then no tests get included and no
      tests are included in the final redis-server binary.
      8febcffd
  25. 02 Jul, 2013 2 commits
  26. 08 Nov, 2012 1 commit
  27. 02 Jan, 2012 1 commit
  28. 05 May, 2011 1 commit