- 11 Aug, 2021 1 commit
-
-
Ozan Tezcan authored
-
- 06 Aug, 2021 1 commit
-
-
Ozan Tezcan authored
-
- 04 Aug, 2021 1 commit
-
-
Shaya Potter authored
create a self documenting function name instead of throwing in a bunch of conditions
-
- 03 Aug, 2021 1 commit
-
-
Shaya Potter authored
Before, we only did "auto commit" of entries if the number of voters == 1. As we can have a "non voting leader", this is wrong, as the voter can be another node, not the leader, therefore we add a condition to ensure that the leader is a voter too, so that we know that the leader is the single voter.
-
- 02 Aug, 2021 1 commit
-
-
Shaya Potter authored
major bug in terms of election as term wasn't being increased in cases of partioned network where a demote was received but not applied. + adds an assert to the existing test of promotion to leader if only voter to ensure term is incremented as fixed by this PR
-
- 01 Aug, 2021 1 commit
-
-
Ozan Tezcan authored
added initial cmake support, fixed coverage usage
-
- 30 Jul, 2021 1 commit
-
-
Shaya Potter authored
this commit changes libraft's from using the DEMOTE_NODE log entry which would then initiate a REMOVE_NODE log entry on the DEMOTE's commit, to only using a REMOVE. * add the removal of the active node flag on append of REMOVE and (add back if reverted) * modify is_voting to check for active state as well this enables simplifying appending and reverting nodes, as we shouldn't be touching voting state, (as a removing node might not be voting yet), only its active state. and as the is_voting check also now checks for active state, simplifies a lot of code that manually tested both. * add a test for reversion of a non voting node removal previously, the code could not handle demoting/removing a non voting node, as demote would want to unset the voting flag (which a non voting node obviously doesn't have), and would therefore fail an assertion. with the new code, we no longer unset the voting flag in removal, and this test make sure both the is_voting and is_active return as expected through a process of add/removal/revert
-
- 28 Jul, 2021 1 commit
-
-
Shaya Potter authored
* fix virtraft bug in _check_log_matching didn't validate against snapshoted node correctly. the previous code just didn't do what it was expected to do * improve virtraft logging * fix entry_pop in virtraft previously, entry_pop never ran during our virtraft tests, probably because without removing leader, we never have a situation where this is neccessary i.e. the only case virtraft can pop entries, is when we have a leader lose leadership and we have an entry pending and not committed. so when another node becomes leader, old leader's entries get popped. however, that has nothing to do with the "id" of the node that its effecting so trying to contorl it through that, makes no sense. * extra comment for fix reminder * ensure that we start with a term of 1 in virtraft, not 0. snapshot code fails if we have a snapshot term of 0 (explicitly returns an error if the term stored in snapshot is 0). Co-authored-by:
Yossi Gottlieb <yossigo@gmail.com>
-
- 27 Jul, 2021 1 commit
-
-
Shaya Potter authored
raft_get_last_log_term() is used for filling in vote requests, except it didn't match 100% with the logic in should_grant_vote * update test to prove that change works as needed previous test tested when we don't snapshot everything, but code was broken when we did. modified test tested only when we snapshot everything, now we do both in sequence. * use raft_get_last_log_term in __should_grant_vote() also modify __should_grant_vote to take a raft_server_t instead of raft_server_privat_t so its not constantly casting it to void.
-
- 26 Jul, 2021 1 commit
-
-
Shaya Potter authored
before we were able to promote a "ready" but not applied nonvoting node to a voting state, which means it would change the calculation as could vote for itself to be added. * fix tests that check for has_sufficient_logs because of a fix put in to not allow a node to be added until its "addition" as a non voter was comitted, that broke existing tests where that flag wasn't being set and testing that the nodes could be promoted * add a test that has_sufficient_logs will fail if addition not committed yet code before would add a node as a voter (via has_sufficient_logs) even if the initial non voter addition wasn't committed the test for this in the code actually tested after setting addition_committed. add a test that does the same without that flag being set and expects that has_sufficient_logs will not be set
-
- 19 Jul, 2021 2 commits
-
-
Shaya Potter authored
current_leader points to the node object corresponding to the leader node. But we are about to free() it. to prevent an access after free, have to unset it here.
-
Yossi Gottlieb authored
-
- 23 May, 2021 1 commit
-
-
Shaya Potter authored
Co-authored-by:
Yossi Gottlieb <yossigo@gmail.com>
-
- 11 May, 2021 1 commit
-
-
Shaya Potter authored
Before this commit, active and voting flags were ignored resulting with a result that does not agree with `raft_get_num_voting_nodes()` and an assertion. This could be seen when a leader node gets removed while a read operation is in progress.
-
- 29 May, 2020 1 commit
-
-
Yossi Gottlieb authored
Fix for a special case where quorum reads are attempted on a single node cluster before anything else was written.
-
- 27 May, 2020 1 commit
-
-
Yossi Gottlieb authored
-
- 26 May, 2020 1 commit
-
-
Yossi Gottlieb authored
If snapshot is on the same term, avoid resetting voted_for to prevent an additional vote. If snapshot is on a newer term, reset and persist term and vote.
-
- 24 May, 2020 1 commit
-
-
Yossi Gottlieb authored
-
- 16 Apr, 2020 1 commit
-
-
Yossi Gottlieb authored
-
- 23 Mar, 2020 2 commits
-
-
Yossi Gottlieb authored
During joint consensus, we need to deliver entries to demoted and removed nodes so they can gracefully shut down. This also fixes an issue with raft_send_appendentries_all() which aborted on first delivery error, creating artificial cluster partitions. This problem is further aggravated when attempting to deliver to inactive nodes.
-
Yossi Gottlieb authored
Turns out documentation is not up to date regarding the process of node removal, and it the current implementation assumes a two-phase process is always required (i.e. DEMOTE followed by REMOVE).
-
- 12 Mar, 2020 2 commits
-
-
Yossi Gottlieb authored
The no-op entry gets committed as soon as a new leader is elected, in order to establish the commit index and prevent stale reads.
-
Yossi Gottlieb authored
This fixes an issue with virtraft2 which was not able to perform REMOVE_NODE when DEMOTE_NODE was applied. The previous fix of directly removing nodes was not aligned with how virtraft2 manages nodes.
-
- 10 Mar, 2020 4 commits
-
-
Yossi Gottlieb authored
-
Yossi Gottlieb authored
-
Yossi Gottlieb authored
-
Yossi Gottlieb authored
The limit for enforcing a single uncommitted voting change must apply to remove node as well. It seems like it was left out considering only the case where it follows DEMOTE_NODE, but that's not really required.
-
- 31 Dec, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 19 Dec, 2018 2 commits
-
-
Yossi Gottlieb authored
-
Yossi Gottlieb authored
This makes it possible to request a consistent read without having to commit it as a log operation. For every read request an AE heartbeat is delivered and a quorum response is expected.
-
- 18 Dec, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 13 Dec, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 11 Dec, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 09 Dec, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 06 Dec, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 18 Nov, 2018 1 commit
-
-
Yossi Gottlieb authored
-
- 16 Oct, 2018 1 commit
-
-
Yossi Gottlieb authored
This is probably most common when loading a snapshot. Currently it is only possibly to free allocated entry memory on log_pop and log_poll, but neither are called on log_reset(). This is a quick and non-breaking fix. A better but not backward compatible option can be to have a free function callback as part of the entry itself (automatically called when needed, not by log_pop or log_poll). This would also make it easier to avoid redundant buffer allocs/copies on the app side.
-
- 08 Oct, 2018 2 commits
-
-
Yossi Gottlieb authored
-
Yossi Gottlieb authored
All nodes expect local should be removed when loading a snapshot, and any prior knowledge about them should be void.
-
- 06 Oct, 2018 1 commit
-
-
Willem authored
Make tests_main exit non-zero if any test fails
-