Commit 57d5e207 authored by Johny Mattsson's avatar Johny Mattsson
Browse files

Imported latest SDK 1.4.0 on the side in prep for upgrade.

parent 093a8959
@echo off
echo gen_misc.bat version 20150511
echo .
echo Please follow below steps(1-5) to generate specific bin(s):
echo STEP 1: choose boot version(0=boot_v1.1, 1=boot_v1.2+, 2=none)
set input=default
set /p input=enter(0/1/2, default 2):
if %input% equ 0 (
set boot=old
) else (
if %input% equ 1 (
set boot=new
) else (
set boot=none
)
)
echo boot mode: %boot%
echo.
echo STEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)
set input=default
set /p input=enter (0/1/2, default 0):
if %input% equ 1 (
if %boot% equ none (
set app=0
echo choose no boot before
echo generate bin: eagle.flash.bin+eagle.irom0text.bin
) else (
set app=1
echo generate bin: user1.bin
)
) else (
if %input% equ 2 (
if %boot% equ none (
set app=0
echo choose no boot before
echo generate bin: eagle.flash.bin+eagle.irom0text.bin
) else (
set app=2
echo generate bin: user2.bin
)
) else (
if %boot% neq none (
set boot=none
echo ignore boot
)
set app=0
echo generate bin: eagle.flash.bin+eagle.irom0text.bin
))
echo.
echo STEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)
set input=default
set /p input=enter (0/1/2/3, default 2):
if %input% equ 0 (
set spi_speed=20
) else (
if %input% equ 1 (
set spi_speed=26.7
) else (
if %input% equ 3 (
set spi_speed=80
) else (
set spi_speed=40
)))
echo spi speed: %spi_speed% MHz
echo.
echo STEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)
set input=default
set /p input=enter (0/1/2/3, default 0):
if %input% equ 1 (
set spi_mode=QOUT
) else (
if %input% equ 2 (
set spi_mode=DIO
) else (
if %input% equ 3 (
set spi_mode=DOUT
) else (
set spi_mode=QIO
)))
echo spi mode: %spi_mode%
echo.
echo STEP 5: choose flash size and map
echo 0= 512KB( 256KB+ 256KB)
echo 2=1024KB( 512KB+ 512KB)
echo 3=2048KB( 512KB+ 512KB)
echo 4=4096KB( 512KB+ 512KB)
echo 5=2048KB(1024KB+1024KB)
echo 6=4096KB(1024KB+1024KB)
set input=default
set /p input=enter (0/1/2/3/4/5/6, default 0):
if %input% equ 2 (
set spi_size_map=2
echo spi size: 1024KB
echo spi ota map: 512KB + 512KB
) else (
if %input% equ 3 (
set spi_size_map=3
echo spi size: 2048KB
echo spi ota map: 512KB + 512KB
) else (
if %input% equ 4 (
set spi_size_map=4
echo spi size: 4096KB
echo spi ota map: 512KB + 512KB
) else (
if %input% equ 5 (
set spi_size_map=5
echo spi size: 2048KB
echo spi ota map: 1024KB + 1024KB
) else (
if %input% equ 6 (
set spi_size_map=6
echo spi size: 4096KB
echo spi ota map: 1024KB + 1024KB
) else (
set spi_size_map=0
echo spi size: 512KB
echo spi ota map: 256KB + 256KB
)
)
)
)
)
touch user/user_main.c
echo.
echo start...
echo.
make BOOT=%boot% APP=%app% SPI_SPEED=%spi_speed% SPI_MODE=%spi_mode% SPI_SIZE=%spi_size_map%
#!/bin/bash
echo "gen_misc.sh version 20150511"
echo ""
echo "Please follow below steps(1-5) to generate specific bin(s):"
echo "STEP 1: choose boot version(0=boot_v1.1, 1=boot_v1.2+, 2=none)"
echo "enter(0/1/2, default 2):"
read input
if [ -z "$input" ]; then
boot=none
elif [ $input == 0 ]; then
boot=old
elif [ $input == 1 ]; then
boot=new
else
boot=none
fi
echo "boot mode: $boot"
echo ""
echo "STEP 2: choose bin generate(0=eagle.flash.bin+eagle.irom0text.bin, 1=user1.bin, 2=user2.bin)"
echo "enter (0/1/2, default 0):"
read input
if [ -z "$input" ]; then
if [ $boot != none ]; then
boot=none
echo "ignore boot"
fi
app=0
echo "generate bin: eagle.flash.bin+eagle.irom0text.bin"
elif [ $input == 1 ]; then
if [ $boot == none ]; then
app=0
echo "choose no boot before"
echo "generate bin: eagle.flash.bin+eagle.irom0text.bin"
else
app=1
echo "generate bin: user1.bin"
fi
elif [ $input == 2 ]; then
if [ $boot == none ]; then
app=0
echo "choose no boot before"
echo "generate bin: eagle.flash.bin+eagle.irom0text.bin"
else
app=2
echo "generate bin: user2.bin"
fi
else
if [ $boot != none ]; then
boot=none
echo "ignore boot"
fi
app=0
echo "generate bin: eagle.flash.bin+eagle.irom0text.bin"
fi
echo ""
echo "STEP 3: choose spi speed(0=20MHz, 1=26.7MHz, 2=40MHz, 3=80MHz)"
echo "enter (0/1/2/3, default 2):"
read input
if [ -z "$input" ]; then
spi_speed=40
elif [ $input == 0 ]; then
spi_speed=20
elif [ $input == 1 ]; then
spi_speed=26.7
elif [ $input == 3 ]; then
spi_speed=80
else
spi_speed=40
fi
echo "spi speed: $spi_speed MHz"
echo ""
echo "STEP 4: choose spi mode(0=QIO, 1=QOUT, 2=DIO, 3=DOUT)"
echo "enter (0/1/2/3, default 0):"
read input
if [ -z "$input" ]; then
spi_mode=QIO
elif [ $input == 1 ]; then
spi_mode=QOUT
elif [ $input == 2 ]; then
spi_mode=DIO
elif [ $input == 3 ]; then
spi_mode=DOUT
else
spi_mode=QIO
fi
echo "spi mode: $spi_mode"
echo ""
echo "STEP 5: choose spi size and map"
echo " 0= 512KB( 256KB+ 256KB)"
echo " 2=1024KB( 512KB+ 512KB)"
echo " 3=2048KB( 512KB+ 512KB)"
echo " 4=4096KB( 512KB+ 512KB)"
echo " 5=2048KB(1024KB+1024KB)"
echo " 6=4096KB(1024KB+1024KB)"
echo "enter (0/2/3/4/5/6, default 0):"
read input
if [ -z "$input" ]; then
spi_size_map=0
echo "spi size: 512KB"
echo "spi ota map: 256KB + 256KB"
elif [ $input == 2 ]; then
spi_size_map=2
echo "spi size: 1024KB"
echo "spi ota map: 512KB + 512KB"
elif [ $input == 3 ]; then
spi_size_map=3
echo "spi size: 2048KB"
echo "spi ota map: 512KB + 512KB"
elif [ $input == 4 ]; then
spi_size_map=4
echo "spi size: 4096KB"
echo "spi ota map: 512KB + 512KB"
elif [ $input == 5 ]; then
spi_size_map=5
echo "spi size: 2048KB"
echo "spi ota map: 1024KB + 1024KB"
elif [ $input == 6 ]; then
spi_size_map=6
echo "spi size: 4096KB"
echo "spi ota map: 1024KB + 1024KB"
else
spi_size_map=0
echo "spi size: 512KB"
echo "spi ota map: 256KB + 256KB"
fi
echo ""
touch user/user_main.c
echo ""
echo "start..."
echo ""
make COMPILE=gcc BOOT=$boot APP=$app SPI_SPEED=$spi_speed SPI_MODE=$spi_mode SPI_SIZE_MAP=$spi_size_map
#ifndef __I2C_MASTER_H__
#define __I2C_MASTER_H__
#define I2C_MASTER_SDA_MUX PERIPHS_IO_MUX_GPIO2_U
#define I2C_MASTER_SCL_MUX PERIPHS_IO_MUX_MTMS_U
#define I2C_MASTER_SDA_GPIO 2
#define I2C_MASTER_SCL_GPIO 14
#define I2C_MASTER_SDA_FUNC FUNC_GPIO2
#define I2C_MASTER_SCL_FUNC FUNC_GPIO14
//#define I2C_MASTER_SDA_MUX PERIPHS_IO_MUX_GPIO2_U
//#define I2C_MASTER_SCL_MUX PERIPHS_IO_MUX_GPIO0_U
//#define I2C_MASTER_SDA_GPIO 2
//#define I2C_MASTER_SCL_GPIO 0
//#define I2C_MASTER_SDA_FUNC FUNC_GPIO2
//#define I2C_MASTER_SCL_FUNC FUNC_GPIO0
#if 0
#define I2C_MASTER_GPIO_SET(pin) \
gpio_output_set(1<<pin,0,1<<pin,0)
#define I2C_MASTER_GPIO_CLR(pin) \
gpio_output_set(0,1<<pin,1<<pin,0)
#define I2C_MASTER_GPIO_OUT(pin,val) \
if(val) I2C_MASTER_GPIO_SET(pin);\
else I2C_MASTER_GPIO_CLR(pin)
#endif
#define I2C_MASTER_SDA_HIGH_SCL_HIGH() \
gpio_output_set(1<<I2C_MASTER_SDA_GPIO | 1<<I2C_MASTER_SCL_GPIO, 0, 1<<I2C_MASTER_SDA_GPIO | 1<<I2C_MASTER_SCL_GPIO, 0)
#define I2C_MASTER_SDA_HIGH_SCL_LOW() \
gpio_output_set(1<<I2C_MASTER_SDA_GPIO, 1<<I2C_MASTER_SCL_GPIO, 1<<I2C_MASTER_SDA_GPIO | 1<<I2C_MASTER_SCL_GPIO, 0)
#define I2C_MASTER_SDA_LOW_SCL_HIGH() \
gpio_output_set(1<<I2C_MASTER_SCL_GPIO, 1<<I2C_MASTER_SDA_GPIO, 1<<I2C_MASTER_SDA_GPIO | 1<<I2C_MASTER_SCL_GPIO, 0)
#define I2C_MASTER_SDA_LOW_SCL_LOW() \
gpio_output_set(0, 1<<I2C_MASTER_SDA_GPIO | 1<<I2C_MASTER_SCL_GPIO, 1<<I2C_MASTER_SDA_GPIO | 1<<I2C_MASTER_SCL_GPIO, 0)
void i2c_master_gpio_init(void);
void i2c_master_init(void);
#define i2c_master_wait os_delay_us
void i2c_master_stop(void);
void i2c_master_start(void);
void i2c_master_setAck(uint8 level);
uint8 i2c_master_getAck(void);
uint8 i2c_master_readByte(void);
void i2c_master_writeByte(uint8 wrdata);
bool i2c_master_checkAck(void);
void i2c_master_send_ack(void);
void i2c_master_send_nack(void);
#endif
#ifndef __KEY_H__
#define __KEY_H__
#include "gpio.h"
typedef void (* key_function)(void);
struct single_key_param {
uint8 key_level;
uint8 gpio_id;
uint8 gpio_func;
uint32 gpio_name;
os_timer_t key_5s;
os_timer_t key_50ms;
key_function short_press;
key_function long_press;
};
struct keys_param {
uint8 key_num;
struct single_key_param **single_key;
};
struct single_key_param *key_init_single(uint8 gpio_id, uint32 gpio_name, uint8 gpio_func, key_function long_press, key_function short_press);
void key_init(struct keys_param *key);
#endif
unsigned char default_certificate[] = {
0x30, 0x82, 0x01, 0x82, 0x30, 0x81, 0xec, 0x02, 0x09, 0x00, 0x88, 0xf2,
0x5f, 0x46, 0x12, 0x2e, 0x3d, 0x3a, 0x30, 0x0d, 0x06, 0x09, 0x2a, 0x86,
0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x05, 0x05, 0x00, 0x30, 0x1c, 0x31,
0x1a, 0x30, 0x18, 0x06, 0x03, 0x55, 0x04, 0x0a, 0x13, 0x11, 0x77, 0x77,
0x77, 0x2e, 0x65, 0x73, 0x70, 0x72, 0x65, 0x73, 0x73, 0x69, 0x66, 0x2e,
0x63, 0x6f, 0x6d, 0x30, 0x1e, 0x17, 0x0d, 0x31, 0x34, 0x30, 0x36, 0x32,
0x34, 0x31, 0x30, 0x32, 0x32, 0x33, 0x33, 0x5a, 0x17, 0x0d, 0x32, 0x38,
0x30, 0x33, 0x30, 0x32, 0x31, 0x30, 0x32, 0x32, 0x33, 0x33, 0x5a, 0x30,
0x34, 0x31, 0x12, 0x30, 0x10, 0x06, 0x03, 0x55, 0x04, 0x0a, 0x13, 0x09,
0x65, 0x73, 0x70, 0x72, 0x65, 0x73, 0x73, 0x69, 0x66, 0x31, 0x1e, 0x30,
0x1c, 0x06, 0x03, 0x55, 0x04, 0x03, 0x13, 0x15, 0x65, 0x73, 0x70, 0x72,
0x65, 0x73, 0x73, 0x69, 0x66, 0x20, 0x49, 0x6f, 0x54, 0x20, 0x70, 0x72,
0x6f, 0x6a, 0x65, 0x63, 0x74, 0x30, 0x5c, 0x30, 0x0d, 0x06, 0x09, 0x2a,
0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x01, 0x01, 0x05, 0x00, 0x03, 0x4b,
0x00, 0x30, 0x48, 0x02, 0x41, 0x00, 0xb9, 0x83, 0x30, 0xca, 0xfb, 0xec,
0x11, 0x9e, 0x94, 0xb7, 0x89, 0xf2, 0x84, 0x2c, 0xda, 0xe1, 0x9a, 0x53,
0x3a, 0x1b, 0x6e, 0xc9, 0x85, 0x81, 0xf9, 0xa3, 0x41, 0xdb, 0xe2, 0x82,
0x3b, 0xfa, 0x80, 0x22, 0x3b, 0x81, 0x6d, 0x25, 0x73, 0x7e, 0xf6, 0x49,
0xcc, 0x69, 0x3c, 0x6c, 0xd8, 0x05, 0xfb, 0x92, 0x02, 0xcf, 0x19, 0x2a,
0x10, 0x7d, 0x69, 0x7a, 0xd8, 0x9d, 0xd3, 0xcf, 0x6c, 0xef, 0x02, 0x03,
0x01, 0x00, 0x01, 0x30, 0x0d, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7,
0x0d, 0x01, 0x01, 0x05, 0x05, 0x00, 0x03, 0x81, 0x81, 0x00, 0x2d, 0x63,
0x58, 0x21, 0xe3, 0x8b, 0x37, 0x0d, 0x28, 0x68, 0x11, 0x0e, 0x4d, 0xdd,
0xf3, 0xea, 0xdb, 0xec, 0xd7, 0x09, 0x47, 0x2c, 0xa1, 0xd8, 0xd1, 0x71,
0x83, 0x11, 0xb4, 0x17, 0xbc, 0x83, 0xea, 0x5a, 0xd6, 0x73, 0x02, 0x25,
0x87, 0x01, 0x76, 0xfc, 0x59, 0x1a, 0xcf, 0xd9, 0x49, 0xc9, 0xf9, 0x1f,
0x5c, 0x3b, 0x24, 0x6a, 0x5c, 0xa5, 0xca, 0xe6, 0x5d, 0x34, 0x5b, 0x5f,
0xcf, 0x56, 0x9c, 0x71, 0xd2, 0x6b, 0xdd, 0x1f, 0x15, 0xae, 0x4d, 0xf1,
0xca, 0x35, 0xc8, 0xdd, 0x93, 0x1b, 0x58, 0x1e, 0x94, 0x08, 0xcf, 0xa0,
0x20, 0xb9, 0x75, 0xa5, 0x4c, 0x77, 0xf5, 0x7f, 0xed, 0xd5, 0xcd, 0x53,
0xaa, 0x87, 0xa6, 0x3c, 0xf5, 0x72, 0xd8, 0xd2, 0xb0, 0xf7, 0x11, 0xb0,
0x0e, 0xe9, 0x41, 0xd6, 0x8e, 0xd9, 0x07, 0xf8, 0xed, 0xf8, 0x67, 0x7f,
0x28, 0x18, 0xf0, 0x1b, 0x29, 0x11
};
unsigned int default_certificate_len = 390;
unsigned char default_private_key[] = {
0x30, 0x82, 0x01, 0x3a, 0x02, 0x01, 0x00, 0x02, 0x41, 0x00, 0xb9, 0x83,
0x30, 0xca, 0xfb, 0xec, 0x11, 0x9e, 0x94, 0xb7, 0x89, 0xf2, 0x84, 0x2c,
0xda, 0xe1, 0x9a, 0x53, 0x3a, 0x1b, 0x6e, 0xc9, 0x85, 0x81, 0xf9, 0xa3,
0x41, 0xdb, 0xe2, 0x82, 0x3b, 0xfa, 0x80, 0x22, 0x3b, 0x81, 0x6d, 0x25,
0x73, 0x7e, 0xf6, 0x49, 0xcc, 0x69, 0x3c, 0x6c, 0xd8, 0x05, 0xfb, 0x92,
0x02, 0xcf, 0x19, 0x2a, 0x10, 0x7d, 0x69, 0x7a, 0xd8, 0x9d, 0xd3, 0xcf,
0x6c, 0xef, 0x02, 0x03, 0x01, 0x00, 0x01, 0x02, 0x40, 0x1d, 0x13, 0x92,
0xf2, 0x3d, 0xca, 0x22, 0x78, 0xd8, 0x96, 0x6b, 0xe8, 0xb7, 0x0e, 0xd0,
0xbf, 0xcb, 0x90, 0x7f, 0xeb, 0x0c, 0xd2, 0x49, 0x3a, 0xb6, 0x06, 0x00,
0xac, 0x96, 0x34, 0x13, 0x72, 0x4b, 0x8c, 0xd2, 0xb9, 0x35, 0xf5, 0x64,
0x18, 0xb2, 0x47, 0x5b, 0x9f, 0xbb, 0xf2, 0x5b, 0x2f, 0x66, 0x78, 0x2d,
0x0a, 0x76, 0x44, 0xc5, 0x4f, 0xdb, 0x7d, 0x13, 0xcf, 0xa5, 0x08, 0xdc,
0x01, 0x02, 0x21, 0x00, 0xdf, 0x9a, 0x89, 0xd0, 0xef, 0x23, 0xcf, 0x12,
0xac, 0x8a, 0x63, 0x1a, 0x8c, 0xc0, 0x3f, 0xf4, 0x38, 0x52, 0x3c, 0x9f,
0x19, 0x0a, 0x37, 0xd2, 0xcb, 0x5d, 0xeb, 0xb6, 0x2a, 0x33, 0xb0, 0x91,
0x02, 0x21, 0x00, 0xd4, 0x63, 0xd9, 0x6a, 0x18, 0x5b, 0xe8, 0xa8, 0x57,
0x4d, 0xd1, 0x9a, 0xa8, 0xd7, 0xe1, 0x65, 0x75, 0xb3, 0xb9, 0x5c, 0x94,
0x14, 0xca, 0x98, 0x41, 0x47, 0x9c, 0x0a, 0x22, 0x38, 0x05, 0x7f, 0x02,
0x20, 0x6a, 0xce, 0xfd, 0xef, 0xe0, 0x9b, 0x61, 0x49, 0x91, 0x43, 0x95,
0x6d, 0x54, 0x38, 0x6d, 0x14, 0x32, 0x67, 0x0d, 0xf0, 0x0d, 0x5c, 0xf5,
0x27, 0x6a, 0xdf, 0x55, 0x3d, 0xb1, 0xd0, 0xf9, 0x11, 0x02, 0x21, 0x00,
0xba, 0x94, 0xa0, 0xf9, 0xb0, 0x3e, 0x85, 0x8b, 0xe5, 0x6e, 0x4a, 0x95,
0x88, 0x80, 0x65, 0xd5, 0x00, 0xea, 0x8b, 0x0b, 0x46, 0x57, 0x61, 0x87,
0x11, 0xc9, 0xfb, 0xcd, 0x77, 0x34, 0x29, 0xb7, 0x02, 0x20, 0x06, 0x8d,
0x41, 0x11, 0x47, 0x93, 0xcb, 0xad, 0xda, 0x5d, 0xe1, 0x9d, 0x49, 0x8d,
0xe0, 0xab, 0x48, 0xe6, 0x18, 0x28, 0x4a, 0x94, 0xae, 0xf9, 0xad, 0xc5,
0x5b, 0x0b, 0x15, 0xc6, 0x73, 0x17
};
unsigned int default_private_key_len = 318;
#ifndef __USER_CONFIG_H__
#define __USER_CONFIG_H__
#define ESP_PLATFORM 1
#define LEWEI_PLATFORM 0
#define USE_OPTIMIZE_PRINTF
#if ESP_PLATFORM
#define PLUG_DEVICE 0
#define LIGHT_DEVICE 1
#define SENSOR_DEVICE 0
#if SENSOR_DEVICE
#define HUMITURE_SUB_DEVICE 1
#define FLAMMABLE_GAS_SUB_DEVICE 0
#endif
//#define SERVER_SSL_ENABLE
//#define CLIENT_SSL_ENABLE
//#define UPGRADE_SSL_ENABLE
#define USE_DNS
#ifdef USE_DNS
#define ESP_DOMAIN "iot.espressif.cn"
#endif
//#define SOFTAP_ENCRYPT
#ifdef SOFTAP_ENCRYPT
#define PASSWORD "v*%W>L<@i&Nxe!"
#endif
#if SENSOR_DEVICE
#define SENSOR_DEEP_SLEEP
#if HUMITURE_SUB_DEVICE
#define SENSOR_DEEP_SLEEP_TIME 30000000
#elif FLAMMABLE_GAS_SUB_DEVICE
#define SENSOR_DEEP_SLEEP_TIME 60000000
#endif
#endif
#if LIGHT_DEVICE
#define USE_US_TIMER
#endif
#if PLUG_DEVICE || LIGHT_DEVICE
#define BEACON_TIMEOUT 150000000
#define BEACON_TIME 50000
#endif
#define AP_CACHE 1
#if AP_CACHE
#define AP_CACHE_NUMBER 5
#endif
#elif LEWEI_PLATFORM
#endif
#endif
#ifndef __USER_DEVICEFIND_H__
#define __USER_DEVICEFIND_H__
void user_devicefind_init(void);
#endif
#ifndef __USER_DEVICE_H__
#define __USER_DEVICE_H__
/* NOTICE---this is for 512KB spi flash.
* you can change to other sector if you use other size spi flash. */
#define ESP_PARAM_START_SEC 0x3D
#define packet_size (2 * 1024)
#define token_size 41
struct esp_platform_saved_param {
uint8 devkey[40];
uint8 token[40];
uint8 activeflag;
uint8 pad[3];
};
enum {
DEVICE_CONNECTING = 40,
DEVICE_ACTIVE_DONE,
DEVICE_ACTIVE_FAIL,
DEVICE_CONNECT_SERVER_FAIL
};
struct dhcp_client_info {
ip_addr_t ip_addr;
ip_addr_t netmask;
ip_addr_t gw;
uint8 flag;
uint8 pad[3];
};
#endif
#ifndef __USER_DEVICEFIND_H__
#define __USER_DEVICEFIND_H__
void user_platform_timer_start(char* pbuffer, struct espconn *pespconn);
#endif
#ifndef __USER_IOT_VERSION_H__
#define __USER_IOT_VERSION_H__
#include "user_config.h"
#define IOT_VERSION_MAJOR 1U
#define IOT_VERSION_MINOR 0U
#define IOT_VERSION_REVISION 5U
#define VERSION_NUM (IOT_VERSION_MAJOR * 1000 + IOT_VERSION_MINOR * 100 + IOT_VERSION_REVISION)
//#define VERSION_TYPE "b"
#define VERSION_TYPE "v"
#if LIGHT_DEVICE
#define device_type 45772
#elif PLUG_DEVICE
#define device_type 23701
#elif SENSOR_DEVICE
#define device_type 12335
#endif
#define ONLINE_UPGRADE 0
#define LOCAL_UPGRADE 0
#define ALL_UPGRADE 1
#define NONE_UPGRADE 0
#if ONLINE_UPGRADE
#define UPGRADE_FALG "O"
#elif LOCAL_UPGRADE
#define UPGRADE_FALG "l"
#elif ALL_UPGRADE
#define UPGRADE_FALG "a"
#elif NONE_UPGRADE
#define UPGRADE_FALG "n"
#endif
#define IOT_VERSION
#endif
#ifndef __USER_JSON_H__
#define __USER_JSON_H__
#include "json/jsonparse.h"
#include "json/jsontree.h"
#define jsonSize 2*1024
void json_parse(struct jsontree_context *json, char *ptrJSONMessage);
void json_ws_send(struct jsontree_value *tree, const char *path, char *pbuf);
int json_putchar(int c);
struct jsontree_value *find_json_path(struct jsontree_context *json, const char *path);
#endif
#ifndef __USER_LIGHT_H__
#define __USER_LIGHT_H__
/*pwm.h: function and macro definition of PWM API , driver level */
/*user_light.h: user interface for light API, user level*/
/*user_light_adj: API for color changing and lighting effects, user level*/
#include "pwm.h"
/* NOTICE !!! ---this is for 512KB spi flash.*/
/* You can change to other sector if you use other size spi flash. */
/* Refer to the documentation about OTA support and flash mapping*/
#define PRIV_PARAM_START_SEC 0x3C
#define PRIV_PARAM_SAVE 0
/*Define the channel number of PWM*/
/*In this demo, we can set 3 for 3 PWM channels: RED, GREEN, BLUE*/
/*Or , we can choose 5 channels : RED,GREEN,BLUE,COLD-WHITE,WARM-WHITE*/
#define PWM_CHANNEL 5 // 5:5channel ; 3:3channel
#define LIGHT_RED 0
#define LIGHT_GREEN 1
#define LIGHT_BLUE 2
#define LIGHT_COLD_WHITE 3
#define LIGHT_WARM_WHITE 4
/*Definition of GPIO PIN params, for GPIO initialization*/
#define PWM_0_OUT_IO_MUX PERIPHS_IO_MUX_MTDI_U
#define PWM_0_OUT_IO_NUM 12
#define PWM_0_OUT_IO_FUNC FUNC_GPIO12
#define PWM_1_OUT_IO_MUX PERIPHS_IO_MUX_MTDO_U
#define PWM_1_OUT_IO_NUM 15
#define PWM_1_OUT_IO_FUNC FUNC_GPIO15
#define PWM_2_OUT_IO_MUX PERIPHS_IO_MUX_MTCK_U
#define PWM_2_OUT_IO_NUM 13
#define PWM_2_OUT_IO_FUNC FUNC_GPIO13
#define PWM_3_OUT_IO_MUX PERIPHS_IO_MUX_MTMS_U
#define PWM_3_OUT_IO_NUM 14
#define PWM_3_OUT_IO_FUNC FUNC_GPIO14
#define PWM_4_OUT_IO_MUX PERIPHS_IO_MUX_GPIO5_U
#define PWM_4_OUT_IO_NUM 5
#define PWM_4_OUT_IO_FUNC FUNC_GPIO5
struct light_saved_param {
uint32 pwm_period;
uint32 pwm_duty[PWM_CHANNEL];
};
void user_light_init(void);
uint32 user_light_get_duty(uint8 channel);
void user_light_set_duty(uint32 duty, uint8 channel);
uint32 user_light_get_period(void);
void user_light_set_period(uint32 period);
#endif
#ifndef __USER_LIGHT_ADJ_H__
#define __USER_LIGHT_ADJ_H__
/*pwm.h: function and macro definition of PWM API , driver level */
/*user_light.h: user interface for light setting, user level*/
/*user_light_adj: API for color changing and lighting effects, user level*/
/*save RGB params to flash when calling light_set_aim*/
#define SAVE_LIGHT_PARAM 0 //set to 0: do not save color params
/*check current consumption and limit the total current for LED driver IC*/
/*NOTE: YOU SHOULD REPLACE WIHT THE LIMIT CURRENT OF YOUR OWN APPLICATION*/
#define LIGHT_CURRENT_LIMIT 0 //set to 0: do not limit total current
#if LIGHT_CURRENT_LIMIT
#define LIGHT_TOTAL_CURRENT_MAX (450*1000) //450000/1000 MA AT MOST
#define LIGHT_CURRENT_MARGIN (80*1000) //80000/1000 MA CURRENT RAISES WHILE TEMPERATURE INCREASING
#define LIGHT_CURRENT_MARGIN_L2 (110*1000) //110000/1000 MA
#define LIGHT_CURRENT_MARGIN_L3 (140*1000) //140000/1000 MA
#endif
/*set target duty for PWM channels, change each channel duty gradually */
void light_set_aim(uint32 r,uint32 g,uint32 b,uint32 cw,uint32 ww,uint32 period);//'white' channel is not used in default demo
void light_set_aim_r(uint32 r);
void light_set_aim_g(uint32 g);
void light_set_aim_b(uint32 b);
void light_set_aim_cw(uint32 cw);
void light_set_aim_ww(uint32 ww);
#endif
#ifndef __USER_ESPSWITCH_H__
#define __USER_ESPSWITCH_H__
#include "driver/key.h"
/* NOTICE---this is for 512KB spi flash.
* you can change to other sector if you use other size spi flash. */
#define PRIV_PARAM_START_SEC 0x3C
#define PRIV_PARAM_SAVE 0
#define PLUG_KEY_NUM 1
#define PLUG_KEY_0_IO_MUX PERIPHS_IO_MUX_MTCK_U
#define PLUG_KEY_0_IO_NUM 13
#define PLUG_KEY_0_IO_FUNC FUNC_GPIO13
#define PLUG_WIFI_LED_IO_MUX PERIPHS_IO_MUX_GPIO0_U
#define PLUG_WIFI_LED_IO_NUM 0
#define PLUG_WIFI_LED_IO_FUNC FUNC_GPIO0
#define PLUG_LINK_LED_IO_MUX PERIPHS_IO_MUX_MTDI_U
#define PLUG_LINK_LED_IO_NUM 12
#define PLUG_LINK_LED_IO_FUNC FUNC_GPIO12
#define PLUG_RELAY_LED_IO_MUX PERIPHS_IO_MUX_MTDO_U
#define PLUG_RELAY_LED_IO_NUM 15
#define PLUG_RELAY_LED_IO_FUNC FUNC_GPIO15
#define PLUG_STATUS_OUTPUT(pin, on) GPIO_OUTPUT_SET(pin, on)
struct plug_saved_param {
uint8_t status;
uint8_t pad[3];
};
void user_plug_init(void);
uint8 user_plug_get_status(void);
void user_plug_set_status(bool status);
#endif
#ifndef __USER_SENSOR_H__
#define __USER_SENSOR_H__
#include "user_config.h"
#include "driver/key.h"
#define SENSOR_KEY_NUM 1
#define SENSOR_KEY_IO_MUX PERIPHS_IO_MUX_MTCK_U
#define SENSOR_KEY_IO_NUM 13
#define SENSOR_KEY_IO_FUNC FUNC_GPIO13
#define SENSOR_WIFI_LED_IO_MUX PERIPHS_IO_MUX_GPIO0_U
#define SENSOR_WIFI_LED_IO_NUM 0
#define SENSOR_WIFI_LED_IO_FUNC FUNC_GPIO0
#define SENSOR_LINK_LED_IO_MUX PERIPHS_IO_MUX_MTDI_U
#define SENSOR_LINK_LED_IO_NUM 12
#define SENSOR_LINK_LED_IO_FUNC FUNC_GPIO12
#define SENSOR_UNUSED_LED_IO_MUX PERIPHS_IO_MUX_MTDO_U
#define SENSOR_UNUSED_LED_IO_NUM 15
#define SENSOR_UNUSED_LED_IO_FUNC FUNC_GPIO15
#if HUMITURE_SUB_DEVICE
bool user_mvh3004_read_th(uint8 *data);
void user_mvh3004_init(void);
#endif
void user_sensor_init(uint8 active);
#endif
#ifndef __USER_WEBSERVER_H__
#define __USER_WEBSERVER_H__
#define SERVER_PORT 80
#define SERVER_SSL_PORT 443
#define URLSize 10
typedef enum Result_Resp {
RespFail = 0,
RespSuc,
} Result_Resp;
typedef enum ProtocolType {
GET = 0,
POST,
} ProtocolType;
typedef enum _ParmType {
SWITCH_STATUS = 0,
INFOMATION,
WIFI,
SCAN,
REBOOT,
DEEP_SLEEP,
LIGHT_STATUS,
CONNECT_STATUS,
USER_BIN
} ParmType;
typedef struct URL_Frame {
enum ProtocolType Type;
char pSelect[URLSize];
char pCommand[URLSize];
char pFilename[URLSize];
} URL_Frame;
typedef struct _rst_parm {
ParmType parmtype;
struct espconn *pespconn;
} rst_parm;
void user_webserver_init(uint32 port);
#endif
#############################################################
# Required variables for each makefile
# Discard this section from all parent makefiles
# Expected variables (with automatic defaults):
# CSRCS (all "C" files in the dir)
# SUBDIRS (all subdirs with a Makefile)
# GEN_LIBS - list of libs to be generated ()
# GEN_IMAGES - list of images to be generated ()
# COMPONENTS_xxx - a list of libs/objs in the form
# subdir/lib to be extracted and rolled up into
# a generated lib/image xxx.a ()
#
ifndef PDIR
GEN_LIBS = libuser.a
endif
#############################################################
# Configuration i.e. compile options etc.
# Target specific stuff (defines etc.) goes in here!
# Generally values applying to a tree are captured in the
# makefile at its root level - these are then overridden
# for a subtree within the makefile rooted therein
#
#DEFINES +=
#############################################################
# Recursion Magic - Don't touch this!!
#
# Each subtree potentially has an include directory
# corresponding to the common APIs applicable to modules
# rooted at that subtree. Accordingly, the INCLUDE PATH
# of a module can only contain the include directories up
# its parent path, and not its siblings
#
# Required for each makefile to inherit from the parent
#
INCLUDES := $(INCLUDES) -I $(PDIR)include
INCLUDES += -I ./
INCLUDES += -I ../../include/ets
PDIR := ../$(PDIR)
sinclude $(PDIR)Makefile
/******************************************************************************
* Copyright 2013-2014 Espressif Systems (Wuxi)
*
* FileName: user_devicefind.c
*
* Description: Find your hardware's information while working any mode.
*
* Modification history:
* 2014/3/12, v1.0 create this file.
*******************************************************************************/
#include "ets_sys.h"
#include "os_type.h"
#include "osapi.h"
#include "mem.h"
#include "user_interface.h"
#include "espconn.h"
#include "user_json.h"
#include "user_devicefind.h"
const char *device_find_request = "Are You Espressif IOT Smart Device?";
#if PLUG_DEVICE
const char *device_find_response_ok = "I'm Plug.";
#elif LIGHT_DEVICE
const char *device_find_response_ok = "I'm Light.";
#elif SENSOR_DEVICE
#if HUMITURE_SUB_DEVICE
const char *device_find_response_ok = "I'm Humiture.";
#elif FLAMMABLE_GAS_SUB_DEVICE
const char *device_find_response_ok = "I'm Flammable Gas.";
#endif
#endif
/*---------------------------------------------------------------------------*/
LOCAL struct espconn ptrespconn;
/******************************************************************************
* FunctionName : user_devicefind_recv
* Description : Processing the received data from the host
* Parameters : arg -- Additional argument to pass to the callback function
* pusrdata -- The received data (or NULL when the connection has been closed!)
* length -- The length of received data
* Returns : none
*******************************************************************************/
LOCAL void ICACHE_FLASH_ATTR
user_devicefind_recv(void *arg, char *pusrdata, unsigned short length)
{
char DeviceBuffer[40] = {0};
char Device_mac_buffer[60] = {0};
char hwaddr[6];
remot_info *premot = NULL;
struct ip_info ipconfig;
if (wifi_get_opmode() != STATION_MODE) {
wifi_get_ip_info(SOFTAP_IF, &ipconfig);
wifi_get_macaddr(SOFTAP_IF, hwaddr);
if (!ip_addr_netcmp((struct ip_addr *)ptrespconn.proto.udp->remote_ip, &ipconfig.ip, &ipconfig.netmask)) {
wifi_get_ip_info(STATION_IF, &ipconfig);
wifi_get_macaddr(STATION_IF, hwaddr);
}
} else {
wifi_get_ip_info(STATION_IF, &ipconfig);
wifi_get_macaddr(STATION_IF, hwaddr);
}
if (pusrdata == NULL) {
return;
}
if (length == os_strlen(device_find_request) &&
os_strncmp(pusrdata, device_find_request, os_strlen(device_find_request)) == 0) {
os_sprintf(DeviceBuffer, "%s" MACSTR " " IPSTR, device_find_response_ok,
MAC2STR(hwaddr), IP2STR(&ipconfig.ip));
os_printf("%s\n", DeviceBuffer);
length = os_strlen(DeviceBuffer);
if (espconn_get_connection_info(&ptrespconn, &premot, 0) != ESPCONN_OK)
return;
os_memcpy(ptrespconn.proto.udp->remote_ip, premot->remote_ip, 4);
ptrespconn.proto.udp->remote_port = premot->remote_port;
espconn_sent(&ptrespconn, DeviceBuffer, length);
} else if (length == (os_strlen(device_find_request) + 18)) {
os_sprintf(Device_mac_buffer, "%s " MACSTR , device_find_request, MAC2STR(hwaddr));
os_printf("%s", Device_mac_buffer);
if (os_strncmp(Device_mac_buffer, pusrdata, os_strlen(device_find_request) + 18) == 0) {
//os_printf("%s\n", Device_mac_buffer);
length = os_strlen(DeviceBuffer);
os_sprintf(DeviceBuffer, "%s" MACSTR " " IPSTR, device_find_response_ok,
MAC2STR(hwaddr), IP2STR(&ipconfig.ip));
os_printf("%s\n", DeviceBuffer);
length = os_strlen(DeviceBuffer);
if (espconn_get_connection_info(&ptrespconn, &premot, 0) != ESPCONN_OK)
return;
os_memcpy(ptrespconn.proto.udp->remote_ip, premot->remote_ip, 4);
ptrespconn.proto.udp->remote_port = premot->remote_port;
espconn_sent(&ptrespconn, DeviceBuffer, length);
} else {
return;
}
}
}
/******************************************************************************
* FunctionName : user_devicefind_init
* Description : the espconn struct parame init
* Parameters : none
* Returns : none
*******************************************************************************/
void ICACHE_FLASH_ATTR
user_devicefind_init(void)
{
ptrespconn.type = ESPCONN_UDP;
ptrespconn.proto.udp = (esp_udp *)os_zalloc(sizeof(esp_udp));
ptrespconn.proto.udp->local_port = 1025;
espconn_regist_recvcb(&ptrespconn, user_devicefind_recv);
espconn_create(&ptrespconn);
}
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment