Unverified Commit 8b1ef35b authored by Christoph Thelen's avatar Christoph Thelen Committed by GitHub
Browse files

Consider RMT channel limitations at allocation time. (#3481)

* Consider RMT channel limitations at allocation time.

The ESP32-C3 is limited to TX on channel 0-1 and RX on channel 2-3.
parent 6e632649
......@@ -76,7 +76,7 @@ static void dht_deinit( void )
static int dht_init( uint8_t gpio_num )
{
// acquire an RMT module for RX
if ((dht_rmt.channel = platform_rmt_allocate( 1 )) >= 0) {
if ((dht_rmt.channel = platform_rmt_allocate( 1, RMT_MODE_RX )) >= 0) {
#ifdef DHT_DEBUG
ESP_LOGI("dht", "RMT RX channel: %d", dht_rmt.channel);
......
......@@ -14,13 +14,14 @@
* @brief Allocate an RMT channel.
*
* @param num_mem Number of memory blocks.
* @param mode Mode of the channel, RMT_MODE_TX allocates a TX channel, RMT_MODE_RX an RX channel.
*
* @return
* - Channel number when successful
* - -1 if no channel available
*
*/
int platform_rmt_allocate( uint8_t num_mem );
int platform_rmt_allocate( uint8_t num_mem, rmt_mode_t mode );
/**
* @brief Release a previously allocated RMT channel.
......
......@@ -113,8 +113,8 @@ static int onewire_rmt_init( uint8_t gpio_num )
}
// acquire an RMT module for TX and RX each
if ((ow_rmt.tx = platform_rmt_allocate( 1 )) >= 0) {
if ((ow_rmt.rx = platform_rmt_allocate( 1 )) >= 0) {
if ((ow_rmt.tx = platform_rmt_allocate( 1, RMT_MODE_TX )) >= 0) {
if ((ow_rmt.rx = platform_rmt_allocate( 1, RMT_MODE_RX )) >= 0) {
#ifdef OW_DEBUG
ESP_LOGI("ow", "RMT TX channel: %d", ow_rmt.tx);
......
......@@ -24,12 +24,33 @@ static bool rmt_channel_check( uint8_t channel, uint8_t num_mem )
return rmt_channel_check( channel-1, num_mem-1);
}
int platform_rmt_allocate( uint8_t num_mem )
#if defined(CONFIG_IDF_TARGET_ESP32C3)
int platform_rmt_allocate( uint8_t num_mem, rmt_mode_t mode )
#else
int platform_rmt_allocate( uint8_t num_mem, rmt_mode_t mode __attribute__((unused)))
#endif
{
int channel;
int alloc_min;
int alloc_max;
uint8_t tag = 1;
for (channel = RMT_CHANNEL_MAX-1; channel >= 0; channel--) {
#if defined(CONFIG_IDF_TARGET_ESP32C3)
/* The ESP32-C3 is limited to TX on channel 0-1 and RX on channel 2-3. */
if( mode==RMT_MODE_TX ) {
alloc_min = 0;
alloc_max = SOC_RMT_TX_CANDIDATES_PER_GROUP - 1;
} else {
alloc_min = RMT_CHANNEL_MAX - SOC_RMT_RX_CANDIDATES_PER_GROUP;
alloc_max = RMT_CHANNEL_MAX - 1;
}
#else
/* The other ESP32 devices can do RX and TX on all channels. */
alloc_min = 0;
alloc_max = RMT_CHANNEL_MAX - 1;
#endif
for (channel = alloc_max; channel >= alloc_min; channel--) {
if (rmt_channel_alloc[channel] == 0) {
if (rmt_channel_check( channel, num_mem )) {
rmt_channel_alloc[channel] = tag++;
......
......@@ -138,7 +138,7 @@ int platform_ws2812_setup( uint8_t gpio_num, uint8_t num_mem, const uint8_t *dat
{
int channel;
if ((channel = platform_rmt_allocate( num_mem )) >= 0) {
if ((channel = platform_rmt_allocate( num_mem, RMT_MODE_TX )) >= 0) {
ws2812_chain_t *chain = &(ws2812_chains[channel]);
chain->valid = true;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment