Commit a4952604 authored by funshine's avatar funshine
Browse files

update readme

parent c702eff4
......@@ -6,21 +6,22 @@ flash 错误
----
注意:有些模块在烧写之后启动,串口输出 ERROR in flash_read: r=。。。
这是因为模块原来的flash内部没有擦除。
可使用blank.bin(4k),重复烧入其实地址0x47000, 0x48000, 0x49000, 0x4a000扇区.
或者自行生成一个512k大小的blank512k.bin, 内容为全0xFF,从0x00000开始烧入flash。
可使用blank.bin(4k),
重复烧入其实地址0x47000, 0x48000, 0x49000, 0x4a000扇区.
或者生成一个512k大小的blank512k.bin, 内容为全0xFF,从0x00000开始烧入。
烧入之后可以正常运行。
概述
------
nodeMcu 支持一键配置
支持一键配置
nodeMcu 基于Lua 5.1.4,使用者需了解最简单的Lua语法。
基于Lua 5.1.4,使用者需了解最简单的Lua语法。
nodeMcu 尽量采用事件驱动的编程模型。
采用事件驱动的编程模型。
nodeMcu 内置 timer,pwm,i2c,net,gpio,wifi module。
内置 timer,pwm,i2c,net,gpio,wifi module。
nodeMcu对模块的引脚进行编号gpio,i2c,pwm等模块需要使用引脚编号进行索引。
对模块的引脚进行编号gpio,i2c,pwm等模块需要使用引脚编号进行索引。
###目前的编号对应表格:
......@@ -265,8 +266,9 @@ send( string, function(sent) )
on(event, function cb())
描述:注册事件的回调函数
event:字符串,可为:"connection","reconnection","disconnection","receive","sent"
function cb(net.socket, [string]):回调函数。第一个参数为socket连接本身。
event:字符串
可为:"connection","reconnection","disconnection","receive","sent"
function cb(net.socket, [string]):回调函数。第一个参数为socket连接。
若event为"receive", 第二个参数为接收到数据,字符串形式。
例子:
......@@ -274,7 +276,8 @@ on(event, function cb())
sk=net.createConnection(net.TCP, false)
sk:on("receive", function(sck, pl) print(pl) end )
sk:connect(80,"115.239.210.27")
sk:send("GET / HTTP/1.1\r\nHost: 115.239.210.27\r\nConnection: keep-alive\r\nAccept: */*\r\n\r\n")
sk:send("GET / HTTP/1.1\r\nHost: 115.239.210.27\r\n
Connection: keep-alive\r\nAccept: */*\r\n\r\n")
close()
......@@ -284,4 +287,5 @@ dns(domain, function cb(net.socket, ip) )
描述:获取domain的ip
domain:字符串
function cb(net.socket, ip):回调函数。第一个参数为socket连接本身, 第二个为获取的ip, 字符串形式。
function cb(net.socket, ip):回调函数。
第一个参数为socket连接本身, 第二个为获取的ip, 字符串形式。
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment