Commit b96e3147 authored by Marcel Stör's avatar Marcel Stör Committed by GitHub
Browse files

Merge pull request #1774 from nodemcu/dev

2.0.0 master drop
parents 81ec3665 20a591f5
/**
* \file aesni.h
*
* \brief AES-NI for hardware AES acceleration on some Intel processors
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_AESNI_H
#define MBEDTLS_AESNI_H
#include "aes.h"
#define MBEDTLS_AESNI_AES 0x02000000u
#define MBEDTLS_AESNI_CLMUL 0x00000002u
#if defined(MBEDTLS_HAVE_ASM) && defined(__GNUC__) && \
( defined(__amd64__) || defined(__x86_64__) ) && \
! defined(MBEDTLS_HAVE_X86_64)
#define MBEDTLS_HAVE_X86_64
#endif
#if defined(MBEDTLS_HAVE_X86_64)
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief AES-NI features detection routine
*
* \param what The feature to detect
* (MBEDTLS_AESNI_AES or MBEDTLS_AESNI_CLMUL)
*
* \return 1 if CPU has support for the feature, 0 otherwise
*/
int mbedtls_aesni_has_support( unsigned int what );
/**
* \brief AES-NI AES-ECB block en(de)cryption
*
* \param ctx AES context
* \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
* \param input 16-byte input block
* \param output 16-byte output block
*
* \return 0 on success (cannot fail)
*/
int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
/**
* \brief GCM multiplication: c = a * b in GF(2^128)
*
* \param c Result
* \param a First operand
* \param b Second operand
*
* \note Both operands and result are bit strings interpreted as
* elements of GF(2^128) as per the GCM spec.
*/
void mbedtls_aesni_gcm_mult( unsigned char c[16],
const unsigned char a[16],
const unsigned char b[16] );
/**
* \brief Compute decryption round keys from encryption round keys
*
* \param invkey Round keys for the equivalent inverse cipher
* \param fwdkey Original round keys (for encryption)
* \param nr Number of rounds (that is, number of round keys minus one)
*/
void mbedtls_aesni_inverse_key( unsigned char *invkey,
const unsigned char *fwdkey, int nr );
/**
* \brief Perform key expansion (for encryption)
*
* \param rk Destination buffer where the round keys are written
* \param key Encryption key
* \param bits Key size in bits (must be 128, 192 or 256)
*
* \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
*/
int mbedtls_aesni_setkey_enc( unsigned char *rk,
const unsigned char *key,
size_t bits );
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_HAVE_X86_64 */
#endif /* MBEDTLS_AESNI_H */
/**
* \file arc4.h
*
* \brief The ARCFOUR stream cipher
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_ARC4_H
#define MBEDTLS_ARC4_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#if !defined(MBEDTLS_ARC4_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief ARC4 context structure
*/
typedef struct
{
int x; /*!< permutation index */
int y; /*!< permutation index */
unsigned char m[256]; /*!< permutation table */
}
mbedtls_arc4_context;
/**
* \brief Initialize ARC4 context
*
* \param ctx ARC4 context to be initialized
*/
void mbedtls_arc4_init( mbedtls_arc4_context *ctx );
/**
* \brief Clear ARC4 context
*
* \param ctx ARC4 context to be cleared
*/
void mbedtls_arc4_free( mbedtls_arc4_context *ctx );
/**
* \brief ARC4 key schedule
*
* \param ctx ARC4 context to be setup
* \param key the secret key
* \param keylen length of the key, in bytes
*/
void mbedtls_arc4_setup( mbedtls_arc4_context *ctx, const unsigned char *key,
unsigned int keylen );
/**
* \brief ARC4 cipher function
*
* \param ctx ARC4 context
* \param length length of the input data
* \param input buffer holding the input data
* \param output buffer for the output data
*
* \return 0 if successful
*/
int mbedtls_arc4_crypt( mbedtls_arc4_context *ctx, size_t length, const unsigned char *input,
unsigned char *output );
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_ARC4_ALT */
#include "arc4_alt.h"
#endif /* MBEDTLS_ARC4_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_arc4_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* arc4.h */
/**
* \file asn1.h
*
* \brief Generic ASN.1 parsing
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_ASN1_H
#define MBEDTLS_ASN1_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#if defined(MBEDTLS_BIGNUM_C)
#include "bignum.h"
#endif
/**
* \addtogroup asn1_module
* \{
*/
/**
* \name ASN1 Error codes
* These error codes are OR'ed to X509 error codes for
* higher error granularity.
* ASN1 is a standard to specify data structures.
* \{
*/
#define MBEDTLS_ERR_ASN1_OUT_OF_DATA -0x0060 /**< Out of data when parsing an ASN1 data structure. */
#define MBEDTLS_ERR_ASN1_UNEXPECTED_TAG -0x0062 /**< ASN1 tag was of an unexpected value. */
#define MBEDTLS_ERR_ASN1_INVALID_LENGTH -0x0064 /**< Error when trying to determine the length or invalid length. */
#define MBEDTLS_ERR_ASN1_LENGTH_MISMATCH -0x0066 /**< Actual length differs from expected length. */
#define MBEDTLS_ERR_ASN1_INVALID_DATA -0x0068 /**< Data is invalid. (not used) */
#define MBEDTLS_ERR_ASN1_ALLOC_FAILED -0x006A /**< Memory allocation failed */
#define MBEDTLS_ERR_ASN1_BUF_TOO_SMALL -0x006C /**< Buffer too small when writing ASN.1 data structure. */
/* \} name */
/**
* \name DER constants
* These constants comply with DER encoded the ANS1 type tags.
* DER encoding uses hexadecimal representation.
* An example DER sequence is:\n
* - 0x02 -- tag indicating INTEGER
* - 0x01 -- length in octets
* - 0x05 -- value
* Such sequences are typically read into \c ::mbedtls_x509_buf.
* \{
*/
#define MBEDTLS_ASN1_BOOLEAN 0x01
#define MBEDTLS_ASN1_INTEGER 0x02
#define MBEDTLS_ASN1_BIT_STRING 0x03
#define MBEDTLS_ASN1_OCTET_STRING 0x04
#define MBEDTLS_ASN1_NULL 0x05
#define MBEDTLS_ASN1_OID 0x06
#define MBEDTLS_ASN1_UTF8_STRING 0x0C
#define MBEDTLS_ASN1_SEQUENCE 0x10
#define MBEDTLS_ASN1_SET 0x11
#define MBEDTLS_ASN1_PRINTABLE_STRING 0x13
#define MBEDTLS_ASN1_T61_STRING 0x14
#define MBEDTLS_ASN1_IA5_STRING 0x16
#define MBEDTLS_ASN1_UTC_TIME 0x17
#define MBEDTLS_ASN1_GENERALIZED_TIME 0x18
#define MBEDTLS_ASN1_UNIVERSAL_STRING 0x1C
#define MBEDTLS_ASN1_BMP_STRING 0x1E
#define MBEDTLS_ASN1_PRIMITIVE 0x00
#define MBEDTLS_ASN1_CONSTRUCTED 0x20
#define MBEDTLS_ASN1_CONTEXT_SPECIFIC 0x80
/* \} name */
/* \} addtogroup asn1_module */
/** Returns the size of the binary string, without the trailing \\0 */
#define MBEDTLS_OID_SIZE(x) (sizeof(x) - 1)
/**
* Compares an mbedtls_asn1_buf structure to a reference OID.
*
* Only works for 'defined' oid_str values (MBEDTLS_OID_HMAC_SHA1), you cannot use a
* 'unsigned char *oid' here!
*/
#define MBEDTLS_OID_CMP(oid_str, oid_buf) \
( ( MBEDTLS_OID_SIZE(oid_str) != (oid_buf)->len ) || \
memcmp( (oid_str), (oid_buf)->p, (oid_buf)->len) != 0 )
#ifdef __cplusplus
extern "C" {
#endif
/**
* \name Functions to parse ASN.1 data structures
* \{
*/
/**
* Type-length-value structure that allows for ASN1 using DER.
*/
typedef struct mbedtls_asn1_buf
{
int tag; /**< ASN1 type, e.g. MBEDTLS_ASN1_UTF8_STRING. */
size_t len; /**< ASN1 length, in octets. */
unsigned char *p; /**< ASN1 data, e.g. in ASCII. */
}
mbedtls_asn1_buf;
/**
* Container for ASN1 bit strings.
*/
typedef struct mbedtls_asn1_bitstring
{
size_t len; /**< ASN1 length, in octets. */
unsigned char unused_bits; /**< Number of unused bits at the end of the string */
unsigned char *p; /**< Raw ASN1 data for the bit string */
}
mbedtls_asn1_bitstring;
/**
* Container for a sequence of ASN.1 items
*/
typedef struct mbedtls_asn1_sequence
{
mbedtls_asn1_buf buf; /**< Buffer containing the given ASN.1 item. */
struct mbedtls_asn1_sequence *next; /**< The next entry in the sequence. */
}
mbedtls_asn1_sequence;
/**
* Container for a sequence or list of 'named' ASN.1 data items
*/
typedef struct mbedtls_asn1_named_data
{
mbedtls_asn1_buf oid; /**< The object identifier. */
mbedtls_asn1_buf val; /**< The named value. */
struct mbedtls_asn1_named_data *next; /**< The next entry in the sequence. */
unsigned char next_merged; /**< Merge next item into the current one? */
}
mbedtls_asn1_named_data;
/**
* \brief Get the length of an ASN.1 element.
* Updates the pointer to immediately behind the length.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param len The variable that will receive the value
*
* \return 0 if successful, MBEDTLS_ERR_ASN1_OUT_OF_DATA on reaching
* end of data, MBEDTLS_ERR_ASN1_INVALID_LENGTH if length is
* unparseable.
*/
int mbedtls_asn1_get_len( unsigned char **p,
const unsigned char *end,
size_t *len );
/**
* \brief Get the tag and length of the tag. Check for the requested tag.
* Updates the pointer to immediately behind the tag and length.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param len The variable that will receive the length
* \param tag The expected tag
*
* \return 0 if successful, MBEDTLS_ERR_ASN1_UNEXPECTED_TAG if tag did
* not match requested tag, or another specific ASN.1 error code.
*/
int mbedtls_asn1_get_tag( unsigned char **p,
const unsigned char *end,
size_t *len, int tag );
/**
* \brief Retrieve a boolean ASN.1 tag and its value.
* Updates the pointer to immediately behind the full tag.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param val The variable that will receive the value
*
* \return 0 if successful or a specific ASN.1 error code.
*/
int mbedtls_asn1_get_bool( unsigned char **p,
const unsigned char *end,
int *val );
/**
* \brief Retrieve an integer ASN.1 tag and its value.
* Updates the pointer to immediately behind the full tag.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param val The variable that will receive the value
*
* \return 0 if successful or a specific ASN.1 error code.
*/
int mbedtls_asn1_get_int( unsigned char **p,
const unsigned char *end,
int *val );
/**
* \brief Retrieve a bitstring ASN.1 tag and its value.
* Updates the pointer to immediately behind the full tag.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param bs The variable that will receive the value
*
* \return 0 if successful or a specific ASN.1 error code.
*/
int mbedtls_asn1_get_bitstring( unsigned char **p, const unsigned char *end,
mbedtls_asn1_bitstring *bs);
/**
* \brief Retrieve a bitstring ASN.1 tag without unused bits and its
* value.
* Updates the pointer to the beginning of the bit/octet string.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param len Length of the actual bit/octect string in bytes
*
* \return 0 if successful or a specific ASN.1 error code.
*/
int mbedtls_asn1_get_bitstring_null( unsigned char **p, const unsigned char *end,
size_t *len );
/**
* \brief Parses and splits an ASN.1 "SEQUENCE OF <tag>"
* Updated the pointer to immediately behind the full sequence tag.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param cur First variable in the chain to fill
* \param tag Type of sequence
*
* \return 0 if successful or a specific ASN.1 error code.
*/
int mbedtls_asn1_get_sequence_of( unsigned char **p,
const unsigned char *end,
mbedtls_asn1_sequence *cur,
int tag);
#if defined(MBEDTLS_BIGNUM_C)
/**
* \brief Retrieve a MPI value from an integer ASN.1 tag.
* Updates the pointer to immediately behind the full tag.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param X The MPI that will receive the value
*
* \return 0 if successful or a specific ASN.1 or MPI error code.
*/
int mbedtls_asn1_get_mpi( unsigned char **p,
const unsigned char *end,
mbedtls_mpi *X );
#endif /* MBEDTLS_BIGNUM_C */
/**
* \brief Retrieve an AlgorithmIdentifier ASN.1 sequence.
* Updates the pointer to immediately behind the full
* AlgorithmIdentifier.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param alg The buffer to receive the OID
* \param params The buffer to receive the params (if any)
*
* \return 0 if successful or a specific ASN.1 or MPI error code.
*/
int mbedtls_asn1_get_alg( unsigned char **p,
const unsigned char *end,
mbedtls_asn1_buf *alg, mbedtls_asn1_buf *params );
/**
* \brief Retrieve an AlgorithmIdentifier ASN.1 sequence with NULL or no
* params.
* Updates the pointer to immediately behind the full
* AlgorithmIdentifier.
*
* \param p The position in the ASN.1 data
* \param end End of data
* \param alg The buffer to receive the OID
*
* \return 0 if successful or a specific ASN.1 or MPI error code.
*/
int mbedtls_asn1_get_alg_null( unsigned char **p,
const unsigned char *end,
mbedtls_asn1_buf *alg );
/**
* \brief Find a specific named_data entry in a sequence or list based on
* the OID.
*
* \param list The list to seek through
* \param oid The OID to look for
* \param len Size of the OID
*
* \return NULL if not found, or a pointer to the existing entry.
*/
mbedtls_asn1_named_data *mbedtls_asn1_find_named_data( mbedtls_asn1_named_data *list,
const char *oid, size_t len );
/**
* \brief Free a mbedtls_asn1_named_data entry
*
* \param entry The named data entry to free
*/
void mbedtls_asn1_free_named_data( mbedtls_asn1_named_data *entry );
/**
* \brief Free all entries in a mbedtls_asn1_named_data list
* Head will be set to NULL
*
* \param head Pointer to the head of the list of named data entries to free
*/
void mbedtls_asn1_free_named_data_list( mbedtls_asn1_named_data **head );
#ifdef __cplusplus
}
#endif
#endif /* asn1.h */
/**
* \file asn1write.h
*
* \brief ASN.1 buffer writing functionality
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_ASN1_WRITE_H
#define MBEDTLS_ASN1_WRITE_H
#include "asn1.h"
#define MBEDTLS_ASN1_CHK_ADD(g, f) do { if( ( ret = f ) < 0 ) return( ret ); else \
g += ret; } while( 0 )
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Write a length field in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param len the length to write
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_len( unsigned char **p, unsigned char *start, size_t len );
/**
* \brief Write a ASN.1 tag in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param tag the tag to write
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_tag( unsigned char **p, unsigned char *start,
unsigned char tag );
/**
* \brief Write raw buffer data
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param buf data buffer to write
* \param size length of the data buffer
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_raw_buffer( unsigned char **p, unsigned char *start,
const unsigned char *buf, size_t size );
#if defined(MBEDTLS_BIGNUM_C)
/**
* \brief Write a big number (MBEDTLS_ASN1_INTEGER) in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param X the MPI to write
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_mpi( unsigned char **p, unsigned char *start, const mbedtls_mpi *X );
#endif /* MBEDTLS_BIGNUM_C */
/**
* \brief Write a NULL tag (MBEDTLS_ASN1_NULL) with zero data in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_null( unsigned char **p, unsigned char *start );
/**
* \brief Write an OID tag (MBEDTLS_ASN1_OID) and data in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param oid the OID to write
* \param oid_len length of the OID
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_oid( unsigned char **p, unsigned char *start,
const char *oid, size_t oid_len );
/**
* \brief Write an AlgorithmIdentifier sequence in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param oid the OID of the algorithm
* \param oid_len length of the OID
* \param par_len length of parameters, which must be already written.
* If 0, NULL parameters are added
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_algorithm_identifier( unsigned char **p, unsigned char *start,
const char *oid, size_t oid_len,
size_t par_len );
/**
* \brief Write a boolean tag (MBEDTLS_ASN1_BOOLEAN) and value in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param boolean 0 or 1
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_bool( unsigned char **p, unsigned char *start, int boolean );
/**
* \brief Write an int tag (MBEDTLS_ASN1_INTEGER) and value in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param val the integer value
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_int( unsigned char **p, unsigned char *start, int val );
/**
* \brief Write a printable string tag (MBEDTLS_ASN1_PRINTABLE_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param text the text to write
* \param text_len length of the text
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_printable_string( unsigned char **p, unsigned char *start,
const char *text, size_t text_len );
/**
* \brief Write an IA5 string tag (MBEDTLS_ASN1_IA5_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param text the text to write
* \param text_len length of the text
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_ia5_string( unsigned char **p, unsigned char *start,
const char *text, size_t text_len );
/**
* \brief Write a bitstring tag (MBEDTLS_ASN1_BIT_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param buf the bitstring
* \param bits the total number of bits in the bitstring
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_bitstring( unsigned char **p, unsigned char *start,
const unsigned char *buf, size_t bits );
/**
* \brief Write an octet string tag (MBEDTLS_ASN1_OCTET_STRING) and
* value in ASN.1 format
* Note: function works backwards in data buffer
*
* \param p reference to current position pointer
* \param start start of the buffer (for bounds-checking)
* \param buf data buffer to write
* \param size length of the data buffer
*
* \return the length written or a negative error code
*/
int mbedtls_asn1_write_octet_string( unsigned char **p, unsigned char *start,
const unsigned char *buf, size_t size );
/**
* \brief Create or find a specific named_data entry for writing in a
* sequence or list based on the OID. If not already in there,
* a new entry is added to the head of the list.
* Warning: Destructive behaviour for the val data!
*
* \param list Pointer to the location of the head of the list to seek
* through (will be updated in case of a new entry)
* \param oid The OID to look for
* \param oid_len Size of the OID
* \param val Data to store (can be NULL if you want to fill it by hand)
* \param val_len Minimum length of the data buffer needed
*
* \return NULL if if there was a memory allocation error, or a pointer
* to the new / existing entry.
*/
mbedtls_asn1_named_data *mbedtls_asn1_store_named_data( mbedtls_asn1_named_data **list,
const char *oid, size_t oid_len,
const unsigned char *val,
size_t val_len );
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_ASN1_WRITE_H */
/**
* \file base64.h
*
* \brief RFC 1521 base64 encoding/decoding
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_BASE64_H
#define MBEDTLS_BASE64_H
#include <stddef.h>
#define MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL -0x002A /**< Output buffer too small. */
#define MBEDTLS_ERR_BASE64_INVALID_CHARACTER -0x002C /**< Invalid character in input. */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Encode a buffer into base64 format
*
* \param dst destination buffer
* \param dlen size of the destination buffer
* \param olen number of bytes written
* \param src source buffer
* \param slen amount of data to be encoded
*
* \return 0 if successful, or MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL.
* *olen is always updated to reflect the amount
* of data that has (or would have) been written.
* If that length cannot be represented, then no data is
* written to the buffer and *olen is set to the maximum
* length representable as a size_t.
*
* \note Call this function with dlen = 0 to obtain the
* required buffer size in *olen
*/
int mbedtls_base64_encode( unsigned char *dst, size_t dlen, size_t *olen,
const unsigned char *src, size_t slen );
/**
* \brief Decode a base64-formatted buffer
*
* \param dst destination buffer (can be NULL for checking size)
* \param dlen size of the destination buffer
* \param olen number of bytes written
* \param src source buffer
* \param slen amount of data to be decoded
*
* \return 0 if successful, MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL, or
* MBEDTLS_ERR_BASE64_INVALID_CHARACTER if the input data is
* not correct. *olen is always updated to reflect the amount
* of data that has (or would have) been written.
*
* \note Call this function with *dst = NULL or dlen = 0 to obtain
* the required buffer size in *olen
*/
int mbedtls_base64_decode( unsigned char *dst, size_t dlen, size_t *olen,
const unsigned char *src, size_t slen );
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_base64_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* base64.h */
This diff is collapsed.
/**
* \file blowfish.h
*
* \brief Blowfish block cipher
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_BLOWFISH_H
#define MBEDTLS_BLOWFISH_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#define MBEDTLS_BLOWFISH_ENCRYPT 1
#define MBEDTLS_BLOWFISH_DECRYPT 0
#define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448
#define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32
#define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
#define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */
#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH -0x0016 /**< Invalid key length. */
#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
#if !defined(MBEDTLS_BLOWFISH_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Blowfish context structure
*/
typedef struct
{
uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */
uint32_t S[4][256]; /*!< key dependent S-boxes */
}
mbedtls_blowfish_context;
/**
* \brief Initialize Blowfish context
*
* \param ctx Blowfish context to be initialized
*/
void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );
/**
* \brief Clear Blowfish context
*
* \param ctx Blowfish context to be cleared
*/
void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );
/**
* \brief Blowfish key schedule
*
* \param ctx Blowfish context to be initialized
* \param key encryption key
* \param keybits must be between 32 and 448 bits
*
* \return 0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
*/
int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief Blowfish-ECB block encryption/decryption
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param input 8-byte input block
* \param output 8-byte output block
*
* \return 0 if successful
*/
int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
int mode,
const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE],
unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief Blowfish-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (8 bytes)
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful, or
* MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
*/
int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
int mode,
size_t length,
unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief Blowfish CFB buffer encryption/decryption.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx Blowfish context
* \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful
*/
int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
const unsigned char *input,
unsigned char *output );
#endif /*MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief Blowfish-CTR buffer encryption/decryption
*
* Warning: You have to keep the maximum use of your counter in mind!
*
* \param ctx Blowfish context
* \param length The length of the data
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 64-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
*
* \return 0 if successful
*/
int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE],
unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_BLOWFISH_ALT */
#include "blowfish_alt.h"
#endif /* MBEDTLS_BLOWFISH_ALT */
#endif /* blowfish.h */
This diff is collapsed.
/**
* \file camellia.h
*
* \brief Camellia block cipher
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_CAMELLIA_H
#define MBEDTLS_CAMELLIA_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include <stddef.h>
#include <stdint.h>
#define MBEDTLS_CAMELLIA_ENCRYPT 1
#define MBEDTLS_CAMELLIA_DECRYPT 0
#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH -0x0024 /**< Invalid key length. */
#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */
#if !defined(MBEDTLS_CAMELLIA_ALT)
// Regular implementation
//
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief CAMELLIA context structure
*/
typedef struct
{
int nr; /*!< number of rounds */
uint32_t rk[68]; /*!< CAMELLIA round keys */
}
mbedtls_camellia_context;
/**
* \brief Initialize CAMELLIA context
*
* \param ctx CAMELLIA context to be initialized
*/
void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
/**
* \brief Clear CAMELLIA context
*
* \param ctx CAMELLIA context to be cleared
*/
void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
/**
* \brief CAMELLIA key schedule (encryption)
*
* \param ctx CAMELLIA context to be initialized
* \param key encryption key
* \param keybits must be 128, 192 or 256
*
* \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
*/
int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief CAMELLIA key schedule (decryption)
*
* \param ctx CAMELLIA context to be initialized
* \param key decryption key
* \param keybits must be 128, 192 or 256
*
* \return 0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
*/
int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
unsigned int keybits );
/**
* \brief CAMELLIA-ECB block encryption/decryption
*
* \param ctx CAMELLIA context
* \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
* \param input 16-byte input block
* \param output 16-byte output block
*
* \return 0 if successful
*/
int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
int mode,
const unsigned char input[16],
unsigned char output[16] );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/**
* \brief CAMELLIA-CBC buffer encryption/decryption
* Length should be a multiple of the block
* size (16 bytes)
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx CAMELLIA context
* \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
* \param length length of the input data
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful, or
* MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
*/
int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
int mode,
size_t length,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CBC */
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/**
* \brief CAMELLIA-CFB128 buffer encryption/decryption
*
* Note: Due to the nature of CFB you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and CAMELLIE_DECRYPT.
*
* \note Upon exit, the content of the IV is updated so that you can
* call the function same function again on the following
* block(s) of data and get the same result as if it was
* encrypted in one call. This allows a "streaming" usage.
* If on the other hand you need to retain the contents of the
* IV, you should either save it manually or use the cipher
* module instead.
*
* \param ctx CAMELLIA context
* \param mode MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
* \param length length of the input data
* \param iv_off offset in IV (updated after use)
* \param iv initialization vector (updated after use)
* \param input buffer holding the input data
* \param output buffer holding the output data
*
* \return 0 if successful, or
* MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
*/
int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
int mode,
size_t length,
size_t *iv_off,
unsigned char iv[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CFB */
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/**
* \brief CAMELLIA-CTR buffer encryption/decryption
*
* Warning: You have to keep the maximum use of your counter in mind!
*
* Note: Due to the nature of CTR you should use the same key schedule for
* both encryption and decryption. So a context initialized with
* mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and MBEDTLS_CAMELLIA_DECRYPT.
*
* \param ctx CAMELLIA context
* \param length The length of the data
* \param nc_off The offset in the current stream_block (for resuming
* within current cipher stream). The offset pointer to
* should be 0 at the start of a stream.
* \param nonce_counter The 128-bit nonce and counter.
* \param stream_block The saved stream-block for resuming. Is overwritten
* by the function.
* \param input The input data stream
* \param output The output data stream
*
* \return 0 if successful
*/
int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
size_t length,
size_t *nc_off,
unsigned char nonce_counter[16],
unsigned char stream_block[16],
const unsigned char *input,
unsigned char *output );
#endif /* MBEDTLS_CIPHER_MODE_CTR */
#ifdef __cplusplus
}
#endif
#else /* MBEDTLS_CAMELLIA_ALT */
#include "camellia_alt.h"
#endif /* MBEDTLS_CAMELLIA_ALT */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_camellia_self_test( int verbose );
#ifdef __cplusplus
}
#endif
#endif /* camellia.h */
/**
* \file ccm.h
*
* \brief Counter with CBC-MAC (CCM) for 128-bit block ciphers
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_CCM_H
#define MBEDTLS_CCM_H
#include "cipher.h"
#define MBEDTLS_ERR_CCM_BAD_INPUT -0x000D /**< Bad input parameters to function. */
#define MBEDTLS_ERR_CCM_AUTH_FAILED -0x000F /**< Authenticated decryption failed. */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief CCM context structure
*/
typedef struct {
mbedtls_cipher_context_t cipher_ctx; /*!< cipher context used */
}
mbedtls_ccm_context;
/**
* \brief Initialize CCM context (just makes references valid)
* Makes the context ready for mbedtls_ccm_setkey() or
* mbedtls_ccm_free().
*
* \param ctx CCM context to initialize
*/
void mbedtls_ccm_init( mbedtls_ccm_context *ctx );
/**
* \brief CCM initialization (encryption and decryption)
*
* \param ctx CCM context to be initialized
* \param cipher cipher to use (a 128-bit block cipher)
* \param key encryption key
* \param keybits key size in bits (must be acceptable by the cipher)
*
* \return 0 if successful, or a cipher specific error code
*/
int mbedtls_ccm_setkey( mbedtls_ccm_context *ctx,
mbedtls_cipher_id_t cipher,
const unsigned char *key,
unsigned int keybits );
/**
* \brief Free a CCM context and underlying cipher sub-context
*
* \param ctx CCM context to free
*/
void mbedtls_ccm_free( mbedtls_ccm_context *ctx );
/**
* \brief CCM buffer encryption
*
* \param ctx CCM context
* \param length length of the input data in bytes
* \param iv nonce (initialization vector)
* \param iv_len length of IV in bytes
* must be 2, 3, 4, 5, 6, 7 or 8
* \param add additional data
* \param add_len length of additional data in bytes
* must be less than 2^16 - 2^8
* \param input buffer holding the input data
* \param output buffer for holding the output data
* must be at least 'length' bytes wide
* \param tag buffer for holding the tag
* \param tag_len length of the tag to generate in bytes
* must be 4, 6, 8, 10, 14 or 16
*
* \note The tag is written to a separate buffer. To get the tag
* concatenated with the output as in the CCM spec, use
* tag = output + length and make sure the output buffer is
* at least length + tag_len wide.
*
* \return 0 if successful
*/
int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
const unsigned char *iv, size_t iv_len,
const unsigned char *add, size_t add_len,
const unsigned char *input, unsigned char *output,
unsigned char *tag, size_t tag_len );
/**
* \brief CCM buffer authenticated decryption
*
* \param ctx CCM context
* \param length length of the input data
* \param iv initialization vector
* \param iv_len length of IV
* \param add additional data
* \param add_len length of additional data
* \param input buffer holding the input data
* \param output buffer for holding the output data
* \param tag buffer holding the tag
* \param tag_len length of the tag
*
* \return 0 if successful and authenticated,
* MBEDTLS_ERR_CCM_AUTH_FAILED if tag does not match
*/
int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
const unsigned char *iv, size_t iv_len,
const unsigned char *add, size_t add_len,
const unsigned char *input, unsigned char *output,
const unsigned char *tag, size_t tag_len );
#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C)
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if the test failed
*/
int mbedtls_ccm_self_test( int verbose );
#endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_CCM_H */
/**
* \file certs.h
*
* \brief Sample certificates and DHM parameters for testing
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_CERTS_H
#define MBEDTLS_CERTS_H
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_SELF_TEST)
#if defined(MBEDTLS_PEM_PARSE_C)
/* Concatenation of all CA certificates in PEM format if available */
extern const char mbedtls_test_cas_pem[];
extern const size_t mbedtls_test_cas_pem_len;
#endif
/* List of all CA certificates, terminated by NULL */
extern const char * mbedtls_test_cas[];
extern const size_t mbedtls_test_cas_len[];
/*
* Convenience for users who just want a certificate:
* RSA by default, or ECDSA if RSA is not available
*/
extern const char * mbedtls_test_ca_crt;
extern const size_t mbedtls_test_ca_crt_len;
extern const char * mbedtls_test_ca_key;
extern const size_t mbedtls_test_ca_key_len;
extern const char * mbedtls_test_ca_pwd;
extern const size_t mbedtls_test_ca_pwd_len;
extern const char * mbedtls_test_srv_crt;
extern const size_t mbedtls_test_srv_crt_len;
extern const char * mbedtls_test_srv_key;
extern const size_t mbedtls_test_srv_key_len;
extern const char * mbedtls_test_cli_crt;
extern const size_t mbedtls_test_cli_crt_len;
extern const char * mbedtls_test_cli_key;
extern const size_t mbedtls_test_cli_key_len;
#if defined(MBEDTLS_ECDSA_C)
extern const char mbedtls_test_ca_crt_ec[];
extern const size_t mbedtls_test_ca_crt_ec_len;
extern const char mbedtls_test_ca_key_ec[];
extern const size_t mbedtls_test_ca_key_ec_len;
extern const char mbedtls_test_ca_pwd_ec[];
extern const size_t mbedtls_test_ca_pwd_ec_len;
extern const char mbedtls_test_srv_crt_ec[];
extern const size_t mbedtls_test_srv_crt_ec_len;
extern const char mbedtls_test_srv_key_ec[];
extern const size_t mbedtls_test_srv_key_ec_len;
extern const char mbedtls_test_cli_crt_ec[];
extern const size_t mbedtls_test_cli_crt_ec_len;
extern const char mbedtls_test_cli_key_ec[];
extern const size_t mbedtls_test_cli_key_ec_len;
#endif
#if defined(MBEDTLS_RSA_C)
extern const char mbedtls_test_ca_crt_rsa[];
extern const size_t mbedtls_test_ca_crt_rsa_len;
extern const char mbedtls_test_ca_key_rsa[];
extern const size_t mbedtls_test_ca_key_rsa_len;
extern const char mbedtls_test_ca_pwd_rsa[];
extern const size_t mbedtls_test_ca_pwd_rsa_len;
extern const char mbedtls_test_srv_crt_rsa[];
extern const size_t mbedtls_test_srv_crt_rsa_len;
extern const char mbedtls_test_srv_key_rsa[];
extern const size_t mbedtls_test_srv_key_rsa_len;
extern const char mbedtls_test_cli_crt_rsa[];
extern const size_t mbedtls_test_cli_crt_rsa_len;
extern const char mbedtls_test_cli_key_rsa[];
extern const size_t mbedtls_test_cli_key_rsa_len;
#endif
#endif
#ifdef __cplusplus
}
#endif
#endif /* certs.h */
This diff is collapsed.
This diff is collapsed.
/**
* \file cipher_internal.h
*
* \brief Cipher wrappers.
*
* \author Adriaan de Jong <dejong@fox-it.com>
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_CIPHER_WRAP_H
#define MBEDTLS_CIPHER_WRAP_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "cipher.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Base cipher information. The non-mode specific functions and values.
*/
struct mbedtls_cipher_base_t
{
/** Base Cipher type (e.g. MBEDTLS_CIPHER_ID_AES) */
mbedtls_cipher_id_t cipher;
/** Encrypt using ECB */
int (*ecb_func)( void *ctx, mbedtls_operation_t mode,
const unsigned char *input, unsigned char *output );
#if defined(MBEDTLS_CIPHER_MODE_CBC)
/** Encrypt using CBC */
int (*cbc_func)( void *ctx, mbedtls_operation_t mode, size_t length,
unsigned char *iv, const unsigned char *input,
unsigned char *output );
#endif
#if defined(MBEDTLS_CIPHER_MODE_CFB)
/** Encrypt using CFB (Full length) */
int (*cfb_func)( void *ctx, mbedtls_operation_t mode, size_t length, size_t *iv_off,
unsigned char *iv, const unsigned char *input,
unsigned char *output );
#endif
#if defined(MBEDTLS_CIPHER_MODE_CTR)
/** Encrypt using CTR */
int (*ctr_func)( void *ctx, size_t length, size_t *nc_off,
unsigned char *nonce_counter, unsigned char *stream_block,
const unsigned char *input, unsigned char *output );
#endif
#if defined(MBEDTLS_CIPHER_MODE_STREAM)
/** Encrypt using STREAM */
int (*stream_func)( void *ctx, size_t length,
const unsigned char *input, unsigned char *output );
#endif
/** Set key for encryption purposes */
int (*setkey_enc_func)( void *ctx, const unsigned char *key,
unsigned int key_bitlen );
/** Set key for decryption purposes */
int (*setkey_dec_func)( void *ctx, const unsigned char *key,
unsigned int key_bitlen);
/** Allocate a new context */
void * (*ctx_alloc_func)( void );
/** Free the given context */
void (*ctx_free_func)( void *ctx );
};
typedef struct
{
mbedtls_cipher_type_t type;
const mbedtls_cipher_info_t *info;
} mbedtls_cipher_definition_t;
extern const mbedtls_cipher_definition_t mbedtls_cipher_definitions[];
extern int mbedtls_cipher_supported[];
#ifdef __cplusplus
}
#endif
#endif /* MBEDTLS_CIPHER_WRAP_H */
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
/**
* \file debug.h
*
* \brief Debug functions
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_DEBUG_H
#define MBEDTLS_DEBUG_H
#if !defined(MBEDTLS_CONFIG_FILE)
#include "config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#include "ssl.h"
#if defined(MBEDTLS_ECP_C)
#include "ecp.h"
#endif
#if defined(MBEDTLS_DEBUG_C)
#define MBEDTLS_DEBUG_STRIP_PARENS( ... ) __VA_ARGS__
#define MBEDTLS_SSL_DEBUG_MSG( level, args ) \
mbedtls_debug_print_msg( ssl, level, __FILE__, __LINE__, \
MBEDTLS_DEBUG_STRIP_PARENS args )
#define MBEDTLS_SSL_DEBUG_RET( level, text, ret ) \
mbedtls_debug_print_ret( ssl, level, __FILE__, __LINE__, text, ret )
#define MBEDTLS_SSL_DEBUG_BUF( level, text, buf, len ) \
mbedtls_debug_print_buf( ssl, level, __FILE__, __LINE__, text, buf, len )
#if defined(MBEDTLS_BIGNUM_C)
#define MBEDTLS_SSL_DEBUG_MPI( level, text, X ) \
mbedtls_debug_print_mpi( ssl, level, __FILE__, __LINE__, text, X )
#endif
#if defined(MBEDTLS_ECP_C)
#define MBEDTLS_SSL_DEBUG_ECP( level, text, X ) \
mbedtls_debug_print_ecp( ssl, level, __FILE__, __LINE__, text, X )
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt ) \
mbedtls_debug_print_crt( ssl, level, __FILE__, __LINE__, text, crt )
#endif
#else /* MBEDTLS_DEBUG_C */
#define MBEDTLS_SSL_DEBUG_MSG( level, args ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_RET( level, text, ret ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_BUF( level, text, buf, len ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_MPI( level, text, X ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_ECP( level, text, X ) do { } while( 0 )
#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt ) do { } while( 0 )
#endif /* MBEDTLS_DEBUG_C */
#ifdef __cplusplus
extern "C" {
#endif
/**
* \brief Set the level threshold to handle globally. Messages that have a
* level over the threshold value are ignored.
* (Default value: 0 (No debug))
*
* \param threshold maximum level of messages to pass on
*/
void mbedtls_debug_set_threshold( int threshold );
void mbedtls_debug_print_msg( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const char *format, ... );
void mbedtls_debug_print_ret( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const char *text, int ret );
void mbedtls_debug_print_buf( const mbedtls_ssl_context *ssl, int level,
const char *file, int line, const char *text,
const unsigned char *buf, size_t len );
#if defined(MBEDTLS_BIGNUM_C)
void mbedtls_debug_print_mpi( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const char *text, const mbedtls_mpi *X );
#endif
#if defined(MBEDTLS_ECP_C)
void mbedtls_debug_print_ecp( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const char *text, const mbedtls_ecp_point *X );
#endif
#if defined(MBEDTLS_X509_CRT_PARSE_C)
void mbedtls_debug_print_crt( const mbedtls_ssl_context *ssl, int level,
const char *file, int line,
const char *text, const mbedtls_x509_crt *crt );
#endif
#ifdef __cplusplus
}
#endif
#endif /* debug.h */
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment