- 04 Feb, 2018 1 commit
-
-
Marcel Stör authored
Fixes #2209.
-
- 28 Oct, 2017 1 commit
-
-
Terry Ellison authored
-
- 22 Mar, 2017 1 commit
-
-
Philip Gladstone authored
Replaces the problematic cjson module.
-
- 10 Mar, 2017 2 commits
-
-
Jonathan Karras authored
- Remove old non-async examples from `lua-examples`. - Rename `ds18b20.EN.md` to `README.md` - Change remaining `toBase64` calls to the more standard `toHex` call. - Fix some spelling and markdown formatting issues in README file. Addresses issue #1841
-
Philip Gladstone authored
-
- 11 Jan, 2017 1 commit
-
-
Arnim Läuger authored
-
- 02 Jan, 2017 1 commit
-
-
Thomas Mohaupt authored
* Toogle between full screen and clip range test
-
- 07 Dec, 2016 1 commit
-
-
Marcel Stör authored
This reverts commit 04ce0adf.
-
- 01 Dec, 2016 1 commit
-
-
Marcel Stör authored
* add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
-
- 13 Oct, 2016 1 commit
-
-
vsky authored
-
- 10 Aug, 2016 1 commit
-
-
Marcel Stör authored
-
- 05 Jun, 2016 1 commit
-
-
Arnim Läuger authored
* Add pcm module. * Add network streaming example. * document hw_timer dependency with pwm * Add vu peak callback.
-
- 03 Jun, 2016 1 commit
-
-
Arnim Läuger authored
* add caching for multi-byte transfers handle HSPI /CS in examples * push similar code snippets into macro
-
- 01 Jun, 2016 1 commit
-
-
Marcel Stör authored
-
- 27 May, 2016 1 commit
-
-
Marcel Stör authored
-
- 18 Apr, 2016 1 commit
-
-
Arnim Läuger authored
-
- 29 Mar, 2016 1 commit
-
-
UncleRedz authored
Corrected typo in u8g documentation and added a new u8g example which demonstrate a draw loop that works correctly with WiFi.
-
- 27 Mar, 2016 1 commit
-
-
UncleRedz authored
Cleaned up the draw loop and changed some comments.
-
- 23 Mar, 2016 1 commit
-
-
UncleRedz authored
Example of an u8glib draw loop that works with WiFi by keeping the draw loop execution time to a minimum.
-
- 14 Feb, 2016 1 commit
-
-
devsaurus authored
-
- 25 Jan, 2016 1 commit
-
-
Marcel Stör authored
Fixes #941
-
- 07 Jan, 2016 2 commits
- 06 Jan, 2016 3 commits
- 16 Nov, 2015 1 commit
-
-
Nick Andrew authored
The DS18S20 has only 1 fractional bit whereas DS18B20 has 4, and their temperature register alignment differs. Check the family code to choose the correct multiplier for both devices. Closes #610 Negative temperatures (less than 0°C) are returned as a sign-extended two's complement number. Subtract 0x10000 to recover the proper negative value. Signed-off-by:
Nick Andrew <nick@nick-andrew.net>
-
- 18 Oct, 2015 2 commits
- 04 Oct, 2015 1 commit
-
-
devsaurus authored
-
- 24 Sep, 2015 1 commit
-
-
devsaurus authored
-
- 17 Sep, 2015 4 commits
- 20 Jul, 2015 1 commit
-
-
devsaurus authored
sh1106_128x64_i2c ssd1306_64x48_i2c ssd1309_128x64_i2c ssd1327_96x96_gr_i2c uc1611_dogm240_i2c uc1611_dogxl240_i2c ld7032_60x32_hw_spi pcd8544_84x48_hw_spi pcf8812_96x65_hw_spi sh1106_128x64_hw_spi ssd1306_64x48_hw_spi ssd1309_128x64_hw_spi ssd1322_nhd31oled_bw_hw_spi ssd1322_nhd31oled_gr_hw_spi ssd1325_nhd27oled_bw_hw_spi ssd1325_nhd27oled_gr_hw_spi ssd1327_96x96_gr_hw_spi ssd1351_128x128_332_hw_spi ssd1351_128x128gh_332_hw_spi ssd1351_128x128_hicolor_hw_spi ssd1351_128x128gh_hicolor_hw_spi ssd1353_160x128_332_hw_spi ssd1353_160x128_hicolor_hw_spi st7565_64128n_hw_spi st7565_dogm128_hw_spi st7565_dogm132_hw_spi st7565_lm6059_hw_spi st7565_lm6063_hw_spi st7565_nhd_c12832_hw_spi st7565_nhd_c12864_hw_spi uc1601_c128032_hw_spi uc1608_240x128_hw_spi uc1608_240x64_hw_spi uc1610_dogxl160_bw_hw_spi uc1610_dogxl160_gr_hw_spi uc1611_dogm240_hw_spi uc1611_dogxl240_hw_spi uc1701_dogs102_hw_spi uc1701_mini12864_hw_spi
-
- 19 Jul, 2015 1 commit
-
-
devsaurus authored
keeps the API as before and gets rid of hw_spi vs sw_spi topics
-
- 16 Jul, 2015 1 commit
-
-
devsaurus authored
+ uniform generaration + addition of further displays - slight unneccesary heap allocation when display drivers are included but not used
-
- 31 May, 2015 2 commits