- 07 Dec, 2016 1 commit
-
-
Marcel Stör authored
This reverts commit 04ce0adf.
-
- 01 Dec, 2016 1 commit
-
-
Marcel Stör authored
* add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
-
- 21 Sep, 2016 1 commit
-
-
Philip Gladstone authored
* Initial version of gdbstub support * Add DEBUG argument to Makefile to add more debug data and turn off -Os * Add the output redirection handling * Added documentation * Cleaned up the english a bit * Make gdboutput actually trap all the output * Review comments
-
- 05 Sep, 2016 1 commit
-
-
Arnim Läuger authored
* Add FatFs * enable BUILD_FATFS for all-module build * push vfs into rest of firmware * align maximum filename length * increase timeout for acmd41 during card initialization * switch from DOS to Unix path semantics chdrive() is substituted by chdir() * update to fatfs R.012a incl. patches 1-6 * add callback for rtc provisioning in file * update docs
-
- 04 Sep, 2016 1 commit
-
-
Yury Popov authored
Fixes #1457
-
- 20 Aug, 2016 3 commits
-
-
Marcel Stör authored
The original code did not deal with UDP binding failures, this new code does one random port attempt and then sets port to 0 to get 'OS default' behaviour, and ASSERTs that that has to work. Patch also moves the local UDP port range definition to udp.h from udp.c.
-
Marcel Stör authored
-
bert hubert authored
The original code did not deal with UDP binding failures, this new code does one random port attempt and then sets port to 0 to get 'OS default' behaviour, and ASSERTs that that has to work. Patch also moves the local UDP port range definition to udp.h from udp.c.
-
- 18 Aug, 2016 1 commit
-
-
Luís Fonseca authored
-
- 04 Aug, 2016 1 commit
-
-
Marcel Stör authored
-
- 02 Aug, 2016 1 commit
-
-
Arnim Läuger authored
To avoid crash in DHCP big packages modify option length from 312 to MTU - IPHEAD(20) - UDPHEAD(8) - DHCPHEAD(236).
-
- 22 Jul, 2016 1 commit
-
-
Arnim Läuger authored
-
- 19 Jul, 2016 1 commit
-
-
Arnim Läuger authored
-
- 10 Jul, 2016 1 commit
-
-
Yury Popov authored
-
- 28 Jun, 2016 1 commit
-
-
Jonathan Karras authored
Port of @pstolarz work on PaulStoffregen/OneWire#8
-
- 26 Jun, 2016 1 commit
-
-
Philip Gladstone authored
-
- 05 Jun, 2016 5 commits
-
-
Arnim Läuger authored
* Add pcm module. * Add network streaming example. * document hw_timer dependency with pwm * Add vu peak callback.
-
Philip Gladstone authored
Fixes #1164 and thus also #1150, #1149, #1147 and #898. * Move to latest version of SPIFFS * Add SPIFFS porting layer for NodeMCU * Add option to delete output if it doesn't fit * Change FLASHSIZE to be in bits by default: default 4mb 32mb * Add SPIFFS_MAX_FILESYSTEM_SIZE override * Add notes on SPIFFS_FIXED_LOCATION * Add 1M boundary * Include the current version of the LICENSE
-
Jason Schmidlapp authored
-
Jason Schmidlapp authored
-
Jason Schmidlapp authored
-
- 03 Jun, 2016 1 commit
-
-
Sebastian authored
-
- 18 May, 2016 1 commit
-
-
Johny Mattsson authored
- Stop fighting against the SDK in terms of owning/writing the init_data block. NodeMCU included a default init_data block because originally the SDK did not, but by now it's not needed. - Expose a way to reconfigure the ADC mode from Lua land. With most people using the cloud builder and not able to change the #define for byte 107 this has been a pain point. - Less confusion about which init_data has been used. Lua code can now simply state what mode it wants the ADC to be in, and not worry about the rest of the init_data complexities such as the init_data changing location due to flashing with wrong flash_size setting, or doing/not doing a chip-erase before loading new NodeMCU firmware.
-
- 29 Apr, 2016 1 commit
-
-
devsaurus authored
-
- 17 Apr, 2016 1 commit
-
-
Philip Gladstone authored
* Auto autobaud detection by default * Added stopping the autobaud if explicitly configured * Add note about auto-baud to the uart.md
-
- 03 Apr, 2016 1 commit
-
-
Philip Gladstone authored
Merging as suggested by @TerryE (and squashing at the same time. Turns out that this feature is enabled for this repo). * Squashed commit of the following: commit f985f10d9d2ee035f5a6ee6245c60d9904d98cc1 Author: philip <philip@gladstonefamily.net> Date: Sun Mar 27 21:52:46 2016 -0400 Better mdns code commit 6ee49ee106274bc63f6309047e57f7bc9828523e Author: philip <philip@gladstonefamily.net> Date: Fri Mar 25 23:25:11 2016 -0400 Update the docs commit 7e455541c6f2531824cfb2419d051f1306935fdf Author: philip <philip@gladstonefamily.net> Date: Thu Mar 24 21:58:16 2016 -0400 Add retries and buffer checking to mdns Get the length right Now it seems to work * Might work for combined mode * Fix crash * Simplified various bits of code. Changed the LUA interface Added checking (to some degree) incoming quyery types Move the defaults to the right place Added reference to the RFC`
-
- 01 Apr, 2016 1 commit
-
-
dnc40085 authored
Implement SDK event monitor Move wifi status event monitor code into seperate file (app/modules/wifi_eventmon.c) Modify wifi lua callback registration code. Add Functions wifi.ap.deauth and wifi.sta.getrssi Rework wifi event monitor to use tasking interface fix for Lua coroutine compatibility issue Made changes Suggested by TerryE Also, moved code that sets the default host name out of luaopen_wifi_init and into a separate function and added a post_task_low entry in it's place. Replaced some if test then return error lines with luaL_argcheck Add check for malloc null return in wifi.eventmon to catch out of memory errors
-
- 25 Mar, 2016 1 commit
-
-
devsaurus authored
-
- 20 Mar, 2016 1 commit
-
-
philip authored
-
- 09 Mar, 2016 1 commit
-
-
Marcel Stör authored
-
- 03 Mar, 2016 1 commit
-
-
TerryE authored
-
- 01 Mar, 2016 2 commits
-
-
TerryE authored
-
Marcel Stör authored
-
- 29 Feb, 2016 1 commit
-
-
philip authored
commit 2c7c3fc3985cc32866e8af496abea9971eaee90a Merge: 9179dae 41022c3b Author: philip <philip@gladstonefamily.net> Date: Sun Feb 28 14:47:47 2016 -0500 Merge remote-tracking branch 'upstream/dev' into rotary_2 commit 9179dae0824e6b35ad09e5113aacc26dc91692c0 Author: philip <philip@gladstonefamily.net> Date: Fri Feb 26 20:53:27 2016 -0500 Review comments commit 67741170e20ccb2b636e701f0664feff2aafbb4c Author: philip <philip@gladstonefamily.net> Date: Fri Feb 26 20:59:49 2016 -0500 Squashed commit of the following: commit 8c9a64731c4a8b9aedda18a399b433b173d2199f Merge: 085935f 19d3c1d5 Author: philip <philip@gladstonefamily.net> Date: Fri Feb 26 20:58:10 2016 -0500 Merge remote-tracking branch 'upstream/dev' into rotarymod Conflicts: app/platform/platform.c commit 085935fc56986d607ff5e05d1663970331959c34 Author: philip <philip@gladstonefamily.net> Date: Fri Feb 26 20:53:27 2016 -0500 Review comment commit 7732fd2d1044f28b8fcf5b0aa0f76d76fe80f449 Author: philip <philip@gladstonefamily.net> Date: Sat Feb 20 12:10:38 2016 -0500 Module to handle rotary decoders Eliminate ROTARY_DEBUG Remove unused file Eliminate a malloc call Cleaned up the register code. Now 0x114 bytes Fix bug with clearing bits in one case Fix the type in the #define name
-
- 26 Feb, 2016 1 commit
-
-
TerryE authored
AFAIK no one uses the wifi.startsmart() and wifi.stopsmart(). Removing them frees up an extra 20-25K of Flash to use as filesystem. So I have added a new config define WIFI_SMART_ENABLE which is enabled by default so the default functionality is the same, but if this is commented out then this code is omitted. I have also removed wofs and upgrade from this build as we no longer support these.
-
- 22 Feb, 2016 1 commit
-
-
philip authored
Squashed commit of the following: commit f1820af82bb5467d0c79c03290fca809b0273030 Author: philip <philip@gladstonefamily.net> Date: Sun Feb 21 15:08:31 2016 -0500 Now uses userdata commit 74a2298f5f2d2b07097a9501046efb8d4061ec5e Merge: 4ffab15 716e6824 Author: philip <philip@gladstonefamily.net> Date: Sun Feb 21 13:54:40 2016 -0500 Merge remote-tracking branch 'upstream/dev' into performance Conflicts: app/platform/hw_timer.c app/platform/hw_timer.h commit 4ffab15a2a15e0c6b2d7e93611a02be47bafdc79 Author: philip <philip@gladstonefamily.net> Date: Fri Feb 12 17:36:12 2016 -0500 Simple low level performance monitoring tool Make it work with the new hw_timer code commit 944db2bdb8a2b725ba683c564b39f30f3b61e47f Author: philip <philip@gladstonefamily.net> Date: Sun Feb 14 10:32:41 2016 -0500 Initial version of the hw_timer as part of the platform Addressed review comments Add the binsize return
-
- 21 Feb, 2016 2 commits
- 18 Feb, 2016 2 commits