1. 20 Mar, 2024 1 commit
  2. 08 Jan, 2023 1 commit
  3. 01 Jan, 2023 1 commit
    • ranshid's avatar
      reprocess command when client is unblocked on keys (#11012) · 383d902c
      ranshid authored
      *TL;DR*
      ---------------------------------------
      Following the discussion over the issue [#7551](https://github.com/redis/redis/issues/7551
      
      )
      We decided to refactor the client blocking code to eliminate some of the code duplications
      and to rebuild the infrastructure better for future key blocking cases.
      
      
      *In this PR*
      ---------------------------------------
      1. reprocess the command once a client becomes unblocked on key (instead of running
         custom code for the unblocked path that's different than the one that would have run if
         blocking wasn't needed)
      2. eliminate some (now) irrelevant code for handling unblocking lists/zsets/streams etc...
      3. modify some tests to intercept the error in cases of error on reprocess after unblock (see
         details in the notes section below)
      4. replace '$' on the client argv with current stream id. Since once we reprocess the stream
         XREAD we need to read from the last msg and not wait for new msg  in order to prevent
         endless block loop. 
      5. Added statistics to the info "Clients" section to report the:
         * `total_blocking_keys` - number of blocking keys
         * `total_blocking_keys_on_nokey` - number of blocking keys which have at least 1 client
            which would like
         to be unblocked on when the key is deleted.
      6. Avoid expiring unblocked key during unblock. Previously we used to lookup the unblocked key
         which might have been expired during the lookup. Now we lookup the key using NOTOUCH and
         NOEXPIRE to avoid deleting it at this point, so propagating commands in blocked.c is no longer needed.
      7. deprecated command flags. We decided to remove the CMD_CALL_STATS and CMD_CALL_SLOWLOG
         and make an explicit verification in the call() function in order to decide if stats update should take place.
         This should simplify the logic and also mitigate existing issues: for example module calls which are
         triggered as part of AOF loading might still report stats even though they are called during AOF loading.
      
      *Behavior changes*
      ---------------------------------------------------
      
      1. As this implementation prevents writing dedicated code handling unblocked streams/lists/zsets,
      since we now re-process the command once the client is unblocked some errors will be reported differently.
      The old implementation used to issue
      ``UNBLOCKED the stream key no longer exists``
      in the following cases:
         - The stream key has been deleted (ie. calling DEL)
         - The stream and group existed but the key type was changed by overriding it (ie. with set command)
         - The key not longer exists after we swapdb with a db which does not contains this key
         - After swapdb when the new db has this key but with different type.
         
      In the new implementation the reported errors will be the same as if the command was processed after effect:
      **NOGROUP** - in case key no longer exists, or **WRONGTYPE** in case the key was overridden with a different type.
      
      2. Reprocessing the command means that some checks will be reevaluated once the
      client is unblocked.
      For example, ACL rules might change since the command originally was executed and
      will fail once the client is unblocked.
      Another example is OOM condition checks which might enable the command to run and
      block but fail the command reprocess once the client is unblocked.
      
      3. One of the changes in this PR is that no command stats are being updated once the
      command is blocked (all stats will be updated once the client is unblocked). This implies
      that when we have many clients blocked, users will no longer be able to get that information
      from the command stats. However the information can still be gathered from the client list.
      
      **Client blocking**
      ---------------------------------------------------
      
      the blocking on key will still be triggered the same way as it is done today.
      in order to block the current client on list of keys, the call to
      blockForKeys will still need to be made which will perform the same as it is today:
      
      *  add the client to the list of blocked clients on each key
      *  keep the key with a matching list node (position in the global blocking clients list for that key)
         in the client private blocking key dict.
      *  flag the client with CLIENT_BLOCKED
      *  update blocking statistics
      *  register the client on the timeout table
      
      **Key Unblock**
      ---------------------------------------------------
      
      Unblocking a specific key will be triggered (same as today) by calling signalKeyAsReady.
      the implementation in that part will stay the same as today - adding the key to the global readyList.
      The reason to maintain the readyList (as apposed to iterating over all clients blocked on the specific key)
      is in order to keep the signal operation as short as possible, since it is called during the command processing.
      The main change is that instead of going through a dedicated code path that operates the blocked command
      we will just call processPendingCommandsAndResetClient.
      
      **ClientUnblock (keys)**
      ---------------------------------------------------
      
      1. Unblocking clients on keys will be triggered after command is
         processed and during the beforeSleep
      8. the general schema is:
      9. For each key *k* in the readyList:
      ```            
      For each client *c* which is blocked on *k*:
                  in case either:
      	          1. *k* exists AND the *k* type matches the current client blocking type
      	  	      OR
      	          2. *k* exists and *c* is blocked on module command
      	    	      OR
      	          3. *k* does not exists and *c* was blocked with the flag
      	             unblock_on_deleted_key
                       do:
                                        1. remove the client from the list of clients blocked on this key
                                        2. remove the blocking list node from the client blocking key dict
                                        3. remove the client from the timeout list
                                        10. queue the client on the unblocked_clients list
                                        11. *NEW*: call processCommandAndResetClient(c);
      ```
      *NOTE:* for module blocked clients we will still call the moduleUnblockClientByHandle
                    which will queue the client for processing in moduleUnblockedClients list.
      
      **Process Unblocked clients**
      ---------------------------------------------------
      
      The process of all unblocked clients is done in the beforeSleep and no change is planned
      in that part.
      
      The general schema will be:
      For each client *c* in server.unblocked_clients:
      
              * remove client from the server.unblocked_clients
              * set back the client readHandler
              * continue processing the pending command and input buffer.
      
      *Some notes regarding the new implementation*
      ---------------------------------------------------
      
      1. Although it was proposed, it is currently difficult to remove the
         read handler from the client while it is blocked.
         The reason is that a blocked client should be unblocked when it is
         disconnected, or we might consume data into void.
      
      2. While this PR mainly keep the current blocking logic as-is, there
         might be some future additions to the infrastructure that we would
         like to have:
         - allow non-preemptive blocking of client - sometimes we can think
           that a new kind of blocking can be expected to not be preempt. for
           example lets imagine we hold some keys on disk and when a command
           needs to process them it will block until the keys are uploaded.
           in this case we will want the client to not disconnect or be
           unblocked until the process is completed (remove the client read
           handler, prevent client timeout, disable unblock via debug command etc...).
         - allow generic blocking based on command declared keys - we might
           want to add a hook before command processing to check if any of the
           declared keys require the command to block. this way it would be
           easier to add new kinds of key-based blocking mechanisms.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Signed-off-by: default avatarRan Shidlansik <ranshid@amazon.com>
      383d902c
  4. 09 Oct, 2022 1 commit
    • Binbin's avatar
      Freeze time sampling during command execution, and scripts (#10300) · 35b3fbd9
      Binbin authored
      Freeze time during execution of scripts and all other commands.
      This means that a key is either expired or not, and doesn't change
      state during a script execution. resolves #10182
      
      This PR try to add a new `commandTimeSnapshot` function.
      The function logic is extracted from `keyIsExpired`, but the related
      calls to `fixed_time_expire` and `mstime()` are removed, see below.
      
      In commands, we will avoid calling `mstime()` multiple times
      and just use the one that sampled in call. The background is,
      e.g. using `PEXPIRE 1` with valgrind sometimes result in the key
      being deleted rather than expired. The reason is that both `PEXPIRE`
      command and `checkAlreadyExpired` call `mstime()` separately.
      
      There are other more important changes in this PR:
      1. Eliminate `fixed_time_expire`, it is no longer needed. 
         When we want to sample time we should always use a time snapshot. 
         We will use `in_nested_call` instead to update the cached time in `call`.
      2. Move the call for `updateCachedTime` from `serverCron` to `afterSleep`.
          Now `commandTimeSnapshot` will always return the sample time, the
          `lookupKeyReadWithFlags` call in `getNodeByQuery` will get a outdated
          cached time (because `processCommand` is out of the `call` context).
          We put the call to `updateCachedTime` in `aftersleep`.
      3. Cache the time each time the module lock Redis.
          Call `updateCachedTime` in `moduleGILAfterLock`, affecting `RM_ThreadSafeContextLock`
          and `RM_ThreadSafeContextTryLock`
      
      Currently the commandTimeSnapshot change affects the following TTL commands:
      - SET EX / SET PX
      - EXPIRE / PEXPIRE
      - SETEX / PSETEX
      - GETEX EX / GETEX PX
      - TTL / PTTL
      - EXPIRETIME / PEXPIRETIME
      - RESTORE key TTL
      
      And other commands just use the cached mstime (including TIME).
      
      This is considered to be a breaking change since it can break a script
      that uses a loop to wait for a key to expire.
      35b3fbd9
  5. 06 Oct, 2022 1 commit
  6. 20 Apr, 2022 1 commit
    • Oran Agra's avatar
      Fixes around clients that must be obeyed. Replica report disk errors in PING. (#10603) · ee220599
      Oran Agra authored
      This PR unifies all the places that test if the current client is the
      master client or AOF client, and uses a method to test that on all of
      these.
      
      Other than some refactoring, these are the actual implications:
      - Replicas **don't** ignore disk error when processing commands not
        coming from their master.
        **This is important for PING to be used for health check of replicas**
      - SETRANGE, APPEND, SETBIT, BITFIELD don't do proto_max_bulk_len check for AOF
      - RM_Call in SCRIPT_MODE ignores disk error when coming from master /
        AOF
      - RM_Call in cluster mode ignores slot check when processing AOF
      - Scripts ignore disk error when processing AOF
      - Scripts **don't** ignore disk error on a replica, if the command comes
        from clients other than the master
      - SCRIPT KILL won't kill script coming from AOF
      - Scripts **don't** skip OOM check on replica if the command comes from
        clients other than the master
      
      Note that Script, AOF, and module clients don't reach processCommand,
      which is why some of the changes don't actually have any implications.
      
      Note, reverting the change done to processCommand in 2f4240b9
      should be dead code due to the above mentioned fact.
      ee220599
  7. 21 Jul, 2020 1 commit
    • Wen Hui's avatar
      Add missing calls to raxStop (#7532) · 4e8f2d68
      Wen Hui authored
      Since the dynamic allocations in raxIterator are only used for deep walks, memory
      leak due to missing call to raxStop can only happen for rax with key names longer
      than 32 bytes.
      
      Out of all the missing calls, the only ones that may lead to a leak are the rax
      for consumer groups and consumers, and these were only in AOFRW and rdbSave, which
      normally only happen in fork or at shutdown.
      4e8f2d68
  8. 11 Apr, 2020 1 commit
  9. 30 Mar, 2020 1 commit
  10. 27 Mar, 2020 1 commit