- 26 Sep, 2022 1 commit
-
-
Ozan Tezcan authored
If a command gets an OOM response and then if we set maxmemory to zero to disable the limit, server.pre_command_oom_state never gets updated and it stays true. As RM_Call() calls with "respect deny-oom" flag checks server.pre_command_oom_state, all calls will fail with OOM. Added server.maxmemory check in RM_Call() to process deny-oom flag only if maxmemory is configured.
-
- 22 Sep, 2022 3 commits
-
-
Shaya Potter authored
Adds a number of user management/ACL validaiton/command execution functions to improve a Redis module's ability to enforce ACLs correctly and easily. * RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both validate ACLs (if requested and set) as well as assign to the client so that scripts executed via RM_Call will have proper ACL validation. * RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP and have it applied to the user * RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump and list). Contains an optimization to cache the stringified version until the underlying ACL is modified. * Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the command, to actually running the command with the right user, so that it also affects commands inside EVAL scripts. see #11231
-
Oran Agra authored
Executing an XAUTOCLAIM command on a stream key in a specific state, with a specially crafted COUNT argument may cause an integer overflow, a subsequent heap overflow, and potentially lead to remote code execution. The problem affects Redis versions 7.0.0 or newer.
-
Binbin authored
Starting from 6.2, after ACL SETUSER user reset, the user will carry the sanitize-payload flag. It was added in #7807, and then ACL SETUSER reset is inconsistent with default newly created user which missing sanitize-payload flag. Same as `off` and `on` these two bits are mutually exclusive, the default created user needs to have sanitize-payload flag. Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser. Note that the bug don't have any real implications, since the code in rdb.c (rdbLoadObject) checks for `USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that `USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters. Added tests to make sure it won't be broken in the future, and updated the comment in ACLSetUser and redis.conf
-
- 21 Sep, 2022 1 commit
-
-
Shay Fadida authored
When using `INFO ALL <section>`, when `section` is a specific module section. Redis will not print the additional section(s). The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 19 Sep, 2022 1 commit
-
-
sundb authored
This PR mainly deals with 2 crashes introduced in #9357, and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode. 1. Fix crash due to deleting an entry from a compress quicklistNode When inserting a large element, we need to create a new quicklistNode first, and then delete its previous element, if the node where the deleted element is located is compressed, it will cause a crash. Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode after some operation, we can use this flag like following: ```c node->dont_compress = 1; /* Prevent to be compressed */ some_operation(node); /* This operation might try to compress this node */ some_other_operation(node); /* We can use this node without decompress it */ node->dont_compress = 0; /* Re-able compression */ quicklistCompressNode(node); ``` Perhaps in the future, we could just disable the current entry from being compressed during the iterator loop, but that would require more work. 2. Fix crash due to wrongly split quicklist before #9357, the offset param of _quicklistSplitNode() will not negative. For now, when offset is negative, the split extent will be wrong. following example: ```c int orig_start = after ? offset + 1 : 0; int orig_extent = after ? -1 : offset; int new_start = after ? 0 : offset; int new_extent = after ? offset + 1 : -1; # offset: -2, after: 1, node->count: 2 # current wrong range: [-1,-1] [0,-1] # correct range: [1,-1] [0, 1] ``` Because only `_quicklistInsert()` splits the quicklistNode and only `quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(), so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash. But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is always positive), so it is not affected. The final conclusion is this crash only occur when we insert a large element with negative index into a list, that affects `LSET` command and `RM_ListSet` module api. 3. In external test mode, we need to restore quicklist packed threshold after when the end of test. 4. Show `node->count` in quicklistRepr(). 5. Add new tcl proc `config_get_set` to support restoring config in tests.
-
- 06 Sep, 2022 1 commit
-
-
ranshid authored
When using cli to add node, there can potentially be a race condition in which all nodes presenting cluster state o.k even though the added node did not yet meet all cluster nodes. this adds another utility function to wait until all cluster nodes see the same cluster size
-
- 05 Sep, 2022 1 commit
-
-
Shaya Potter authored
Add a new "D" flag to RM_Call which runs whatever verification the user requests, but returns before the actual execution of the command. It automatically enables returning error messages as CallReply objects to distinguish success (NULL) from failure (CallReply returned).
-
- 29 Aug, 2022 1 commit
-
-
Oran Agra authored
New test fails on valgrind because strtold("+inf") with valgrind returns a non-inf result same thing is done in incr.tcl.
-
- 28 Aug, 2022 3 commits
-
-
Shaya Potter authored
When RM_Call was used with `M` (reject OOM), `W` (reject writes), as well as `S` (rejecting stale or write commands in "Script mode"), it would have only checked the command flags, but not the declared script flag in case it's a command that runs a script. Refactoring: extracts out similar code in server.c's processCommand to be usable in RM_Call as well.
-
weimeng authored
Bugfix: with the scenario if we force assigned a slot to other master, old master will lose the slot ownership, then old master will call the function delKeysInSlot() to delete all keys which in the slot. These delete operations should replicate to replicas, avoid the data divergence issue in master and replicas. Additionally, in this case, we now call: * signalModifiedKey (to invalidate WATCH) * moduleNotifyKeyspaceEvent (key space notification for modules) * dirty++ (to signal that the persistence file may be outdated) Co-authored-by:
weimeng <weimeng@didiglobal.com> Co-authored-by:
Madelyn Olson <madelyneolson@gmail.com>
-
chendianqiang authored
Check the validity of the value before performing the create operation, prevents new data from being generated even if the request fails to execute. Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
chendianqiang <chendianqiang@meituan.com> Co-authored-by:
Binbin <binloveplay1314@qq.com>
-
- 24 Aug, 2022 3 commits
-
-
Oran Agra authored
Redis 7.0 has #9890 which added an assertion when the propagation queue was not flushed and we got to beforeSleep. But it turns out that when processCommands calls getNodeByQuery and decides to reject the command, it can lead to a key that was lazy expired and is deleted without later flushing the propagation queue. This change prevents lazy expiry from deleting the key at this stage (not as part of a command being processed in `call`)
-
Binbin authored
add a few terms to the white list, and fix a few newly detected typos
-
Meir Shpilraien (Spielrein) authored
The PR reverts the changes made on #10969. The reason for revert was trigger because of occasional test failure that started after the PR was merged. The issue is that if there is a lazy expire during the command invocation, the `del` command is added to the replication stream after the command placeholder. So the logical order on the primary is: * Delete the key (lazy expiration) * Command invocation But the replication stream gets it the other way around: * Command invocation (because the command is written into the placeholder) * Delete the key (lazy expiration) So if the command write to the key that was just lazy expired we will get inconsistency between primary and replica. One solution we considered is to add another lazy expire replication stream and write all the lazy expire there. Then when replicating, we will replicate the lazy expire replication stream first. This will solve this specific test failure but we realize that the issues does not ends here and the more we dig the more problems we find.One of the example we thought about (that can actually crashes Redis) is as follow: * User perform SINTERSTORE * When Redis tries to fetch the second input key it triggers lazy expire * The lazy expire trigger a module logic that deletes the first input key * Now Redis hold the robj of the first input key that was actually freed We believe we took the wrong approach and we will come up with another PR that solve the problem differently, for now we revert the changes so we will not have the tests failure. Notice that not the entire code was revert, some parts of the PR are changes that we would like to keep. The changes that **was** reverted are: * Saving a placeholder for replication at the beginning of the command (`call` function) * Order of the replication stream on active expire and eviction (we will decide how to handle it correctly on follow up PR) * `Spop` changes are no longer needed (because we reverted the placeholder code) Changes that **was not** reverted: * On expire/eviction, wrap the `del` and the notification effect in a multi exec. * `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select. * Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time. Tests: * All tests was kept and only few tests was modify to work correctly with the changes * Test was added to verify that the revert fixes the issues.
-
- 23 Aug, 2022 1 commit
-
-
Oran Agra authored
* Support BUILD_TLS=module to be loaded as a module via config file or command line. e.g. redis-server --loadmodule redis-tls.so * Updates to redismodule.h to allow it to be used side by side with server.h by defining REDISMODULE_CORE_MODULE * Changes to server.h, redismodule.h and module.c to avoid repeated type declarations (gcc 4.8 doesn't like these) * Add a mechanism for non-ABI neutral modules (ones who include server.h) to refuse loading if they detect not being built together with redis (release.c) * Fix wrong signature of RedisModuleDefragFunc, this could break compilation of a module, but not the ABI * Move initialization of listeners in server.c to be after loading the modules * Config TLS after initialization of listeners * Init cluster after initialization of listeners * Add TLS module to CI * Fix a test suite race conditions: Now that the listeners are initialized later, it's not sufficient to wait for the PID message in the log, we need to wait for the "Server Initialized" message. * Fix issues with moduleconfigs test as a result from start_server waiting for "Server Initialized" * Fix issues with modules/infra test as a result of an additional module present Notes about Sentinel: Sentinel can't really rely on the tls module, since it uses hiredis to initiate connections and depends on OpenSSL (won't be able to use any other connection modules for that), so it was decided that when TLS is built as a module, sentinel does not support TLS at all. This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly. Example code of config in redis-tls.so(may be use in the future): RedisModuleString *tls_cfg = NULL; void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) { UNUSED(for_crash_report); RedisModule_InfoAddSection(ctx, ""); RedisModule_InfoAddFieldLongLong(ctx, "var", 42); } int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc) { if (argc != 2) return RedisModule_WrongArity(ctx); return RedisModule_ReplyWithString(ctx, argv[1]); } RedisModuleString *getStringConfigCommand(const char *name, void *privdata) { REDISMODULE_NOT_USED(name); REDISMODULE_NOT_USED(privdata); return tls_cfg; } int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) { REDISMODULE_NOT_USED(name); REDISMODULE_NOT_USED(err); REDISMODULE_NOT_USED(privdata); if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg); RedisModule_RetainString(NULL, new); tls_cfg = new; return REDISMODULE_OK; } int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc) { .... if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR) return REDISMODULE_ERR; if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR) return REDISMODULE_ERR; if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) { if (tls_cfg) { RedisModule_FreeString(ctx, tls_cfg); tls_cfg = NULL; } return REDISMODULE_ERR; } ... } Co-authored-by:
zhenwei pi <pizhenwei@bytedance.com> Signed-off-by:
zhenwei pi <pizhenwei@bytedance.com>
-
- 21 Aug, 2022 1 commit
-
-
Wen Hui authored
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command 1. one test case: XDEL delete multiply id once 2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter, which equal 0 (special positive number), 3 and negative value. Co-authored-by:
Ubuntu <lucas.guang.yang1@huawei.com> Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
Binbin <binloveplay1314@qq.com>
-
- 18 Aug, 2022 3 commits
-
-
Binbin authored
change the cluster-node-timeout from 1 to 1000
-
Binbin authored
Currently, we call zfree(cmd->args), but the argument array needs to be freed recursively (there might be sub-args). Also fixed memory leaks on cmd->tips and cmd->history. Fixes #11145
-
Meir Shpilraien (Spielrein) authored
Fix replication inconsistency on modules that uses key space notifications. ### The Problem In general, key space notifications are invoked after the command logic was executed (this is not always the case, we will discuss later about specific command that do not follow this rules). For example, the `set x 1` will trigger a `set` notification that will be invoked after the `set` logic was performed, so if the notification logic will try to fetch `x`, it will see the new data that was written. Consider the scenario on which the notification logic performs some write commands. for example, the notification logic increase some counter, `incr x{counter}`, indicating how many times `x` was changed. The logical order by which the logic was executed is has follow: ``` set x 1 incr x{counter} ``` The issue is that the `set x 1` command is added to the replication buffer at the end of the command invocation (specifically after the key space notification logic was invoked and performed the `incr` command). The replication/aof sees the commands in the wrong order: ``` incr x{counter} set x 1 ``` In this specific example the order is less important. But if, for example, the notification would have deleted `x` then we would end up with primary-replica inconsistency. ### The Solution Put the command that cause the notification in its rightful place. In the above example, the `set x 1` command logic was executed before the notification logic, so it should be added to the replication buffer before the commands that is invoked by the notification logic. To achieve this, without a major code refactoring, we save a placeholder in the replication buffer, when finishing invoking the command logic we check if the command need to be replicated, and if it does, we use the placeholder to add it to the replication buffer instead of appending it to the end. To be efficient and not allocating memory on each command to save the placeholder, the replication buffer array was modified to reuse memory (instead of allocating it each time we want to replicate commands). Also, to avoid saving a placeholder when not needed, we do it only for WRITE or MAY_REPLICATE commands. #### Additional Fixes * Expire and Eviction notifications: * Expire/Eviction logical order was to first perform the Expire/Eviction and then the notification logic. The replication buffer got this in the other way around (first notification effect and then the `del` command). The PR fixes this issue. * The notification effect and the `del` command was not wrap with `multi-exec` (if needed). The PR also fix this issue. * SPOP command: * On spop, the `spop` notification was fired before the command logic was executed. The change in this PR would have cause the replication order to be change (first `spop` command and then notification `logic`) although the logical order is first the notification logic and then the `spop` logic. The right fix would have been to move the notification to be fired after the command was executed (like all the other commands), but this can be considered a breaking change. To overcome this, the PR keeps the current behavior and changes the `spop` code to keep the right logical order when pushing commands to the replication buffer. Another PR will follow to fix the SPOP properly and match it to the other command (we split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if we chose to). #### Unhanded Known Limitations * key miss event: * On key miss event, if a module performed some write command on the event (using `RM_Call`), the `dirty` counter would increase and the read command that cause the key miss event would be replicated to the replication and aof. This problem can also happened on a write command that open some keys but eventually decides not to perform any action. We decided not to handle this problem on this PR because the solution is complex and will cause additional risks in case we will want to cherry-pick this PR. We should decide if we want to handle it in future PR's. For now, modules writers is advice not to perform any write commands on key miss event. #### Testing * We already have tests to cover cases where a notification is invoking write commands that are also added to the replication buffer, the tests was modified to verify that the replica gets the command in the correct logical order. * Test was added to verify that `spop` behavior was kept unchanged. * Test was added to verify key miss event behave as expected. * Test was added to verify the changes do not break lazy expiration. #### Additional Changes * `propagateNow` function can accept a special dbid, -1, indicating not to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands` function. The side effect of this change is that now the `select` command will appear inside the `multi/exec` block on the replication stream (instead of outside of the `multi/exec` block). Tests was modified to match this new behavior.
-
- 16 Aug, 2022 1 commit
-
-
Valentino Geron authored
Make sure the script calls in the tests declare the keys they intend to use. Do that with minimal changes to existing lines (so many scripts still have a hard coded key names) Co-authored-by:
Valentino Geron <valentino@redis.com>
-
- 14 Aug, 2022 2 commits
-
-
guybe7 authored
There's really no point in having dedicated flags to test these features (why shouldn't all commands/features get their own tag?)
-
sundb authored
This pr mainly has the following four changes: 1. Add missing lua_pop in `luaGetFromRegistry`. This bug affects `redis.register_function`, where `luaGetFromRegistry` in `luaRegisterFunction` will return null when we call `redis.register_function` nested. .e.g ``` FUNCTION LOAD "#!lua name=mylib \n local lib=redis \n lib.register_function('f2', function(keys, args) lib.register_function('f1', function () end) end)" fcall f2 0 ```` But since we exit when luaGetFromRegistry returns null, it does not cause the stack to grow indefinitely. 3. When getting `REGISTRY_RUN_CTX_NAME` from the registry, use `serverAssert` instead of error return. Since none of these lua functions are registered at the time of function load, scriptRunCtx will never be NULL. 4. Add `serverAssert` for `luaLdbLineHook`, `luaEngineLoadHook`. 5. Remove `luaGetFromRegistry` from `redis_math_random` and `redis_math_randomseed`, it looks like they are redundant.
-
- 10 Aug, 2022 1 commit
-
-
DarrenJiang13 authored
Fix bug with scripts ignoring client tracking NOLOOP and send an invalidation message anyway.
-
- 07 Aug, 2022 2 commits
-
-
Valentino Geron authored
some skip tags were missing on some tests avoid using HELLO if denytags has resp3 (target server may not support it) Co-authored-by:
Valentino Geron <valentino@redis.com>
-
Huang Zhw authored
`bitfield` with `get` may not be readonly. ``` 127.0.0.1:6384> acl setuser hello on nopass %R~* +@all OK 127.0.0.1:6384> auth hello 1 OK 127.0.0.1:6384> bitfield hello set i8 0 1 (error) NOPERM this user has no permissions to access one of the keys used as arguments 127.0.0.1:6384> bitfield hello set i8 0 1 get i8 0 1) (integer) 0 2) (integer) 1 ``` Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 03 Aug, 2022 2 commits
-
-
Valentino Geron authored
* some of the tests don't clean the key the use * marked tests with `{singledb:skip}` if they use SELECT Co-authored-by:
Valentino Geron <valentino@redis.com>
-
Wen Hui authored
Update error messages for function load
-
- 31 Jul, 2022 1 commit
-
-
Huang Zhw authored
trackingHandlePendingKeyInvalidations should use proto.
-
- 26 Jul, 2022 3 commits
-
-
Huang Zhw authored
When FLUSHDB / FLUSHALL / SWAPDB is inside MULTI / EXEC, the client side tracking invalidation message was interleaved with transaction response.
-
Meir Shpilraien (Spielrein) authored
Fix #11030, use lua_rawget to avoid triggering metatables. #11030 shows how return `_G` from the Lua script (either function or eval), cause the Lua interpreter to Panic and the Redis processes to exit with error code 1. Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable such that the metatable raises an error. The following example demonstrate the issue: ``` 127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0 Error: Server closed the connection ``` ``` PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo') ``` The Lua panic happened because when returning the result to the client, Redis needs to introspect the returning table and transform the table into a resp. In order to scan the table, Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error. This code is not running inside `pcall` (Lua protected call), so raising an error causes the Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1. Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable that raises error when trying to fetch a none existing key. ### Solution Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget` that simply return the value from the table without triggering any metatable logic. This is promised not to raise and error. The downside of this solution is that it might be considered as breaking change, if someone rely on metatable in the returned value. An alternative solution is to wrap this entire logic with `pcall` (Lua protected call), this alternative require a much bigger refactoring. ### Back Porting The same fix will work on older versions as well (6.2, 6.0). Notice that on those version, the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done from inside the script itself. ### Tests Tests was added the verify the fix
-
Viktor Söderqvist authored
Gossip the cluster node blacklist in ping and pong messages. This means that CLUSTER FORGET doesn't need to be sent to all nodes in a cluster. It can be sent to one or more nodes and then be propagated to the rest of them. For each blacklisted node, its node id and its remaining blacklist TTL is gossiped in a cluster bus ping extension (introduced in #9530).
-
- 19 Jul, 2022 1 commit
-
-
Binbin authored
A timing issue like this was reported in freebsd daily CI: ``` *** [err]: Sanity test push cmd after resharding in tests/unit/cluster/cli.tcl Expected 'CLUSTERDOWN The cluster is down' to match '*MOVED*' ``` We additionally wait for each node to reach a consensus on the cluster state in wait_for_condition to avoid the cluster down error. The fix just like #10495, quoting madolson's comment: Cluster check just verifies the the config state is self-consistent, waiting for cluster_state to be okay is an independent check that all the nodes actually believe each other are healthy. At the same time i noticed that unit/moduleapi/cluster.tcl has an exact same test, may have the same problem, also modified it.
-
- 18 Jul, 2022 1 commit
-
-
Oran Agra authored
The temporary array for deleted entries reply of XAUTOCLAIM was insufficient, but also in fact the COUNT argument should be used to control the size of the reply, so instead of terminating the loop by only counting the claimed entries, we'll count deleted entries as well. Fix #10968 Addresses CVE-2022-31144
-
- 17 Jul, 2022 1 commit
-
-
Madelyn Olson authored
In the newly added cluster hostnames test, the primary is failing over during the reboot for valgrind so we are validating the wrong node. This change just sets the replica to prevent taking over, which seems to fix the test. We could have also set the timeout higher, but it slows down the test.
-
- 12 Jul, 2022 1 commit
-
-
Madelyn Olson authored
* Restructured testing to allow running cluster tests easily as part of the normal testing
-
- 11 Jul, 2022 1 commit
-
-
Binbin authored
In #9389, we add a new `cluster-port` config and make cluster bus port configurable, and currently redis-cli --cluster create/add-node doesn't support with a configurable `cluster-port` instance. Because redis-cli uses the old way (port + 10000) to send the `CLUSTER MEET` command. Now we add this support on redis-cli `--cluster`, note we don't need to explicitly pass in the `cluster-port` parameter, we can get the real `cluster-port` of the node in `clusterManagerNodeLoadInfo`, so the `--cluster create` and `--cluster add-node` interfaces have not changed. We will use the `cluster-port` when we are doing `CLUSTER MEET`, also note that `CLUSTER MEET` bus-port parameter was added in 4.0, so if the bus_port (the one in redis-cli) is 0, or equal (port + 10000), we just call `CLUSTER MEET` with 2 arguments, using the old form. Co-authored-by:
Madelyn Olson <34459052+madolson@users.noreply.github.com>
-
- 04 Jul, 2022 1 commit
-
-
Harkrishn Patro authored
Account sharded pubsub channels memory consumption in client memory usage computation to accurately evict client based on the set threshold for `maxmemory-clients`.
-
- 03 Jul, 2022 1 commit
-
-
Yossi Gottlieb authored
Before this commit, TLS tests on Ubuntu 22.04 would fail as dropped connections result with an ECONNABORTED error thrown instead of an empty read.
-
- 28 Jun, 2022 1 commit
-
-
jonnyomerredis authored
When calling CLIENT INFO/LIST, and in various debug prints, Redis is printing the number of pubsub channels / patterns the client is subscribed to. With the addition of sharded pubsub, it would be useful to print the number of keychannels the client is subscribed to as well.
-