- 29 Nov, 2012 2 commits
-
-
antirez authored
The idea is to be able to identify a build in a unique way, so for instance after a bug report we can recognize that the build is the one of a popular Linux distribution and perform the debugging in the same environment.
-
antirez authored
1) We no longer test location by location, otherwise the CPU write cache completely makes our business useless. 2) We still need a memory test that operates in steps from the first to the last location in order to never hit the cache, but that is still able to retain the memory content. This was tested using a Linux box containing a bad memory module with a zingle bit error (always zero). So the final solution does has an error propagation step that is: 1) Invert bits at every location. 2) Swap adiacent locations. 3) Swap adiacent locations again. 4) Invert bits at every location. 5) Swap adiacent locations. 6) Swap adiacent locations again. Before and after these steps, and after step 4, a CRC64 checksum is computed. If the three CRC64 checksums don't match, a memory error was detected.
-
- 28 Nov, 2012 3 commits
-
-
charsyam authored
-
Matt Arsenault authored
-
charsyam authored
-
- 22 Nov, 2012 6 commits
-
-
antirez authored
EVALSHA used to crash if the SHA1 was not lowercase (Issue #783). Fixed using a case insensitive dictionary type for the sha -> script map used for replication of scripts.
-
antirez authored
This fixes issue #761.
-
antirez authored
After the transcation starts with a MULIT, the previous behavior was to return an error on problems such as maxmemory limit reached. But still to execute the transaction with the subset of queued commands on EXEC. While it is true that the client was able to check for errors distinguish QUEUED by an error reply, MULTI/EXEC in most client implementations uses pipelining for speed, so all the commands and EXEC are sent without caring about replies. With this change: 1) EXEC fails if at least one command was not queued because of an error. The EXECABORT error is used. 2) A generic error is always reported on EXEC. 3) The client DISCARDs the MULTI state after a failed EXEC, otherwise pipelining multiple transactions would be basically impossible: After a failed EXEC the next transaction would be simply queued as the tail of the previous transaction.
-
antirez authored
We use this new bio.c feature in order to stop our I/O threads if there is a memory test to do on crash. In this case we don't want anything else than the main thread to run, otherwise the other threads may mess with the heap and the memory test will report a false positive.
-
antirez authored
-
antirez authored
-
- 19 Nov, 2012 2 commits
-
-
antirez authored
Finally Redis is able to report the amount of memory used by copy-on-write while saving an RDB or writing an AOF file in background. Note that this information is currently only logged (at NOTICE level) and not shown in INFO because this is less trivial (but surely doable with some minor form of interprocess communication). The reason we can't capture this information on the parent before we call wait3() is that the Linux kernel will release the child memory ASAP, and only retain the minimal state for the process that is useful to report the child termination to the parent. The COW size is obtained by summing all the Private_Dirty fields found in the "smap" file inside the proc filesystem for the process. All this is Linux specific and is not available on other systems.
-
antirez authored
For non Linux systmes it just returns 0. This function is useful to estimate copy-on-write because of childs saving stuff on disk.
-
- 14 Nov, 2012 1 commit
-
-
antirez authored
-
- 12 Nov, 2012 1 commit
-
-
antirez authored
The previous behavior was to return -1 if: 1) Existing key but without an expire set. 2) Non existing key. Now the second case is handled in a different, and TTL will return -2 if the key does not exist at all. PTTL follows the same behavior as well.
-
- 08 Nov, 2012 1 commit
-
-
antirez authored
-
- 06 Nov, 2012 1 commit
-
-
antirez authored
So instead to reply with a generic error like: -ERR ... wrong kind of value ... now it replies with: -WRONGTYPE ... wrong kind of value ... This makes this particular error easy to check without resorting to (fragile) pattern matching of the error string (however the error string used to be consistent already). Client libraries should return a specific exeption type for this error. Most of the commit is about fixing unit tests.
-
- 02 Nov, 2012 1 commit
-
-
Runzhen Wang authored
-
- 01 Nov, 2012 3 commits
-
-
antirez authored
After the wait3() syscall we used to do something like that: if (pid == server.rdb_child_pid) { backgroundSaveDoneHandler(exitcode,bysignal); } else { .... } So the AOF rewrite was handled in the else branch without actually checking if the pid really matches. This commit makes the check explicit and logs at WARNING level if the pid returned by wait3() does not match neither the RDB or AOF rewrite child.
-
Yecheng Fu authored
-
antirez authored
This also fixes issue #745.
-
- 31 Oct, 2012 1 commit
-
-
antirez authored
Because of the short circuit behavior of && inverting the two sides of the if expression avoids an hash table lookup if the non-EX variant of SET is called. Thanks to Weibin Yao (@yaoweibin on github) for spotting this.
-
- 30 Oct, 2012 6 commits
- 22 Oct, 2012 7 commits
-
-
antirez authored
-
antirez authored
-
antirez authored
This was an important information missing from the INFO output in the replication section. It obviously reflects if the slave is read only or not.
-
Greg Hurrell authored
-
Schuster authored
(Commit message from @antirez as it was missign in the original commits, also the patch was modified a bit to still work with 2.4 dumps and to avoid if expressions that are always true due to checked types range) This commit changes redis-check-dump to account for new encodings and for the new MSTIME expire format. It also refactors the test for valid type into a function. The code is still compatible with Redis 2.4 generated dumps. This fixes issue #709.
-
antirez authored
In some system, notably osx, the 3.5 GB limit was too far and not able to prevent a crash for out of memory. The 3 GB limit works better and it is still a lot of memory within a 4 GB theorical limit so it's not going to bore anyone :-) This fixes issue #711
-
antirez authored
When calling SCRIPT KILL currently you can get two errors: * No script in timeout (busy) state. * The script already performed a write. It is useful to be able to distinguish the two errors, but right now both start with "ERR" prefix, so string matching (that is fragile) must be used. This commit introduces two different prefixes. -NOTBUSY and -UNKILLABLE respectively to reply with an error when no script is busy at the moment, and when the script already executed a write operation and can not be killed.
-
- 18 Oct, 2012 1 commit
-
-
NanXiao authored
The code of current implementation: if (c->pending == 0) clientDone(c); In clientDone function, the c's memory has been freed, then the loop will continue: while(c->pending). The memory of c has been freed now, so c->pending is invalid (c is an invalid pointer now), and this will cause memory dump in some platforams(eg: Solaris). So I think the code should be modified as: if (c->pending == 0) { clientDone(c); break; } and this will not lead to while(c->pending).
-
- 16 Oct, 2012 1 commit
-
-
antirez authored
Before of this commit it used to be like this: MULTI EXEC ... actual commands of the transaction ... Because after all that is the natural order of things. Transaction commands are queued and executed *only after* EXEC is called. However this makes debugging with MONITOR a mess, so the code was modified to provide a coherent output. What happens is that MULTI is rendered in the MONITOR output as far as possible, instead EXEC is propagated only after the transaction is executed, or even in the case it fails because of WATCH, so in this case you'll simply see: MULTI EXEC An empty transaction.
-
- 11 Oct, 2012 1 commit
-
-
antirez authored
If the server is password protected we need to accept AUTH when there is a server busy (-BUSY) condition, otherwise it will be impossible to send SHUTDOWN NOSAVE or SCRIPT KILL. This fixes issue #708.
-
- 05 Oct, 2012 2 commits
-
-
antirez authored
-
antirez authored
The previously used hash function, djbhash, is not secure against collision attacks even when the seed is randomized as there are simple ways to find seed-independent collisions. The new hash function appears to be safe (or much harder to exploit at least) in this case, and has better distribution. Better distribution does not always means that's better. For instance in a fast benchmark with "DEBUG POPULATE 1000000" I obtained the following results: 1.6 seconds with djbhash 2.0 seconds with murmurhash2 This is due to the fact that djbhash will hash objects that follow the pattern `prefix:<id>` and where the id is numerically near, to near buckets. This improves the locality. However in other access patterns with keys that have no relation murmurhash2 has some (apparently minimal) speed advantage. On the other hand a better distribution should significantly improve the quality of the distribution of elements returned with dictGetRandomKey() that is used in SPOP, SRANDMEMBER, RANDOMKEY, and other commands. Everything considered, and under the suspect that this commit fixes a security issue in Redis, we are switching to the new hash function. If some serious speed regression will be found in the future we'll be able to step back easiliy. This commit fixes issue #663.
-