1. 20 Oct, 2021 1 commit
    • guybe7's avatar
      Treat subcommands as commands (#9504) · 43e736f7
      guybe7 authored
      ## Intro
      
      The purpose is to allow having different flags/ACL categories for
      subcommands (Example: CONFIG GET is ok-loading but CONFIG SET isn't)
      
      We create a small command table for every command that has subcommands
      and each subcommand has its own flags, etc. (same as a "regular" command)
      
      This commit also unites the Redis and the Sentinel command tables
      
      ## Affected commands
      
      CONFIG
      Used to have "admin ok-loading ok-stale no-script"
      Changes:
      1. Dropped "ok-loading" in all except GET (this doesn't change behavior since
      there were checks in the code doing that)
      
      XINFO
      Used to have "read-only random"
      Changes:
      1. Dropped "random" in all except CONSUMERS
      
      XGROUP
      Used to have "write use-memory"
      Changes:
      1. Dropped "use-memory" in all except CREATE and CREATECONSUMER
      
      COMMAND
      No changes.
      
      MEMORY
      Used to have "random read-only"
      Changes:
      1. Dropped "random" in PURGE and USAGE
      
      ACL
      Used to have "admin no-script ok-loading ok-stale"
      Changes:
      1. Dropped "admin" in WHOAMI, GENPASS, and CAT
      
      LATENCY
      No changes.
      
      MODULE
      No changes.
      
      SLOWLOG
      Used to have "admin random ok-loading ok-stale"
      Changes:
      1. Dropped "random" in RESET
      
      OBJECT
      Used to have "read-only random"
      Changes:
      1. Dropped "random" in ENCODING and REFCOUNT
      
      SCRIPT
      Used to have "may-replicate no-script"
      Changes:
      1. Dropped "may-replicate" in all except FLUSH and LOAD
      
      CLIENT
      Used to have "admin no-script random ok-loading ok-stale"
      Changes:
      1. Dropped "random" in all except INFO and LIST
      2. Dropped "admin" in ID, TRACKING, CACHING, GETREDIR, INFO, SETNAME, GETNAME, and REPLY
      
      STRALGO
      No changes.
      
      PUBSUB
      No changes.
      
      CLUSTER
      Changes:
      1. Dropped "admin in countkeysinslots, getkeysinslot, info, nodes, keyslot, myid, and slots
      
      SENTINEL
      No changes.
      
      (note that DEBUG also fits, but we decided not to convert it since it's for
      debugging and anyway undocumented)
      
      ## New sub-command
      This commit adds another element to the per-command output of COMMAND,
      describing the list of subcommands, if any (in the same structure as "regular" commands)
      Also, it adds a new subcommand:
      ```
      COMMAND LIST [FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>)]
      ```
      which returns a set of all commands (unless filters), but excluding subcommands.
      
      ## Module API
      A new module API, RM_CreateSubcommand, was added, in order to allow
      module writer to define subcommands
      
      ## ACL changes:
      1. Now, that each subcommand is actually a command, each has its own ACL id.
      2. The old mechanism of allowed_subcommands is redundant
      (blocking/allowing a subcommand is the same as blocking/allowing a regular command),
      but we had to keep it, to support the widespread usage of allowed_subcommands
      to block commands with certain args, that aren't subcommands (e.g. "-select +select|0").
      3. I have renamed allowed_subcommands to allowed_firstargs to emphasize the difference.
      4. Because subcommands are commands in ACL too, you can now use "-" to block subcommands
      (e.g. "+client -client|kill"), which wasn't possible in the past.
      5. It is also possible to use the allowed_firstargs mechanism with subcommand.
      For example: `+config -config|set +config|set|loglevel` will block all CONFIG SET except
      for setting the log level.
      6. All of the ACL changes above required some amount of refactoring.
      
      ## Misc
      1. There are two approaches: Either each subcommand has its own function or all
         subcommands use the same function, determining what to do according to argv[0].
         For now, I took the former approaches only with CONFIG and COMMAND,
         while other commands use the latter approach (for smaller blamelog diff).
      2. Deleted memoryGetKeys: It is no longer needed because MEMORY USAGE now uses the "range" key spec.
      4. Bugfix: GETNAME was missing from CLIENT's help message.
      5. Sentinel and Redis now use the same table, with the same function pointer.
         Some commands have a different implementation in Sentinel, so we redirect
         them (these are ROLE, PUBLISH, and INFO).
      6. Command stats now show the stats per subcommand (e.g. instead of stats just
         for "config" you will have stats for "config|set", "config|get", etc.)
      7. It is now possible to use COMMAND directly on subcommands:
         COMMAND INFO CONFIG|GET (The pipeline syntax was inspired from ACL, and
         can be used in functions lookupCommandBySds and lookupCommandByCString)
      8. STRALGO is now a container command (has "help")
      
      ## Breaking changes:
      1. Command stats now show the stats per subcommand (see (5) above)
      43e736f7
  2. 06 Oct, 2021 1 commit
  3. 04 Oct, 2021 1 commit
  4. 26 Sep, 2021 1 commit
  5. 15 Sep, 2021 1 commit
  6. 09 Sep, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_zset (#9366) · 3ca6972e
      sundb authored
      Part two of implementing #8702 (zset), after #8887.
      
      ## Description of the feature
      Replaced all uses of ziplist with listpack in t_zset, and optimized some of the code to optimize performance.
      
      ## Rdb format changes
      New `RDB_TYPE_ZSET_LISTPACK` rdb type.
      
      ## Rdb loading improvements:
      1) Pre-expansion of dict for validation of duplicate data for listpack and ziplist.
      2) Simplifying the release of empty key objects when RDB loading.
      3) Unify ziplist and listpack data verify methods for zset and hash, and move code to rdb.c.
      
      ## Interface changes
      1) New `zset-max-listpack-entries` config is an alias for `zset-max-ziplist-entries` (same with `zset-max-listpack-value`).
      2) OBJECT ENCODING will return listpack instead of ziplist.
      
      ## Listpack improvements:
      1) Add `lpDeleteRange` and `lpDeleteRangeWithEntry` functions to delete a range of entries from listpack.
      2) Improve the performance of `lpCompare`, converting from string to integer is faster than converting from integer to string.
      3) Replace `snprintf` with `ll2string` to improve performance in converting numbers to strings in `lpGet()`.
      
      ## Zset improvements:
      1) Improve the performance of `zzlFind` method, use `lpFind` instead of `lpCompare` in a loop.
      2) Use `lpDeleteRangeWithEntry` instead of `lpDelete` twice to delete a element of zset.
      
      ## Tests
      1) Add some unittests for `lpDeleteRange` and `lpDeleteRangeWithEntry` function.
      2) Add zset RDB loading test.
      3) Add benchmark test for `lpCompare` and `ziplsitCompare`.
      4) Add empty listpack zset corrupt dump test.
      3ca6972e
  7. 10 Aug, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_hash (#8887) · 02fd76b9
      sundb authored
      
      
      Part one of implementing #8702 (taking hashes first before other types)
      
      ## Description of the feature
      1. Change ziplist encoded hash objects to listpack encoding.
      2. Convert existing ziplists on RDB loading time. an O(n) operation.
      
      ## Rdb format changes
      1. Add RDB_TYPE_HASH_LISTPACK rdb type.
      2. Bump RDB_VERSION to 10
      
      ## Interface changes
      1. New `hash-max-listpack-entries` config is an alias for `hash-max-ziplist-entries` (same with `hash-max-listpack-value`)
      2. OBJECT ENCODING will return `listpack` instead of `ziplist`
      
      ## Listpack improvements:
      1. Support direct insert, replace integer element (rather than convert back and forth from string)
      3. Add more listpack capabilities to match the ziplist ones (like `lpFind`, `lpRandomPairs` and such)
      4. Optimize element length fetching, avoid multiple calculations
      5. Use inline to avoid function call overhead.
      
      ## Tests
      1. Add a new test to the RDB load time conversion
      2. Adding the listpack unit tests. (based on the one in ziplist.c)
      3. Add a few "corrupt payload: fuzzer findings" tests, and slightly modify existing ones.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      02fd76b9
  8. 09 Aug, 2021 1 commit
    • Qu Chen's avatar
      Cleanup: createAOFClient uses createClient to avoid overlooked mismatches (#9338) · 0b643e93
      Qu Chen authored
      AOF fake client creation (createAOFClient) was doing similar work as createClient,
      with some minor differences, most of which unintended, this was dangerous and
      meant that many changes to createClient should have always been reflected to aof.c
      
      This cleanup changes createAOFClient to call createClient with NULL, like we
      do in module.c and elsewhere.
      0b643e93
  9. 04 Aug, 2021 1 commit
    • Wang Yuan's avatar
      Use madvise(MADV_DONTNEED) to release memory to reduce COW (#8974) · d4bca53c
      Wang Yuan authored
      
      
      ## Backgroud
      As we know, after `fork`, one process will copy pages when writing data to these
      pages(CoW), and another process still keep old pages, they totally cost more memory.
      For redis, we suffered that redis consumed much memory when the fork child is serializing
      key/values, even that maybe cause OOM.
      
      But actually we find, in redis fork child process, the child process don't need to keep some
      memory and parent process may write or update that, for example, child process will never
      access the key-value that is serialized but users may update it in parent process.
      So we think it may reduce COW if the child process release memory that it is not needed.
      
      ## Implementation
      For releasing key value in child process, we may think we call `decrRefCount` to free memory,
      but i find the fork child process still use much memory when we don't write any data to redis,
      and it costs much more time that slows down bgsave. Maybe because memory allocator doesn't
      really release memory to OS, and it may modify some inner data for this free operation, especially
      when we free small objects.
      
      Moreover, CoW is based on  pages, so it is a easy way that we only free the memory bulk that is
      not less than kernel page size. madvise(MADV_DONTNEED) can quickly release specified region
      pages to OS bypassing memory allocator, and allocator still consider that this memory still is used
      and don't change its inner data.
      
      There are some buffers we can release in the fork child process:
      - **Serialized key-values**
        the fork child process never access serialized key-values, so we try to free them.
        Because we only can release big bulk memory, and it is time consumed to iterate all
        items/members/fields/entries of complex data type. So we decide to iterate them and
        try to release them only when their average size of item/member/field/entry is more
        than page size of OS.
      - **Replication backlog**
        Because replication backlog is a cycle buffer, it will be changed quickly if redis has heavy
        write traffic, but in fork child process, we don't need to access that.
      - **Client buffers**
        If clients have requests during having the fork child process, clients' buffer also be changed
        frequently. The memory includes client query buffer, output buffer, and client struct used memory.
      
      To get child process peak private dirty memory, we need to count peak memory instead
      of last used memory, because the child process may continue to release memory (since
      COW used to only grow till now, the last was equivalent to the peak).
      Also we're adding a new `current_cow_peak` info variable (to complement the existing
      `current_cow_size`)
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      d4bca53c
  10. 11 Jul, 2021 1 commit
    • Huang Zhw's avatar
      Do not install a file event to send data to rewrite child when parent stop... · cb961d8c
      Huang Zhw authored
      Do not install a file event to send data to rewrite child when parent stop sending diff to child in aof rewrite. (#8767)
      
      In aof rewrite, when parent stop sending data to child, if there is
      new rewrite data, aofChildWriteDiffData write event will be installed.
      Then this event is issued and deletes the file event without do anyting.
      This will happen over and over again until aof rewrite finish.
      
      This bug used to waste a few system calls per excessive wake-up
      (epoll_ctl and epoll_wait) per cycle, each cycle triggered by receiving
      a write command from a client.
      cb961d8c
  11. 16 Jun, 2021 1 commit
  12. 14 Jun, 2021 1 commit
    • YaacovHazan's avatar
      cleanup around loadAppendOnlyFile (#9012) · 1677efb9
      YaacovHazan authored
      Today when we load the AOF on startup, the loadAppendOnlyFile checks if
      the file is openning for reading.
      This check is redundent (dead code) as we open the AOF file for writing at initServer,
      and the file will always be existing for the loadAppendOnlyFile.
      
      In this commit:
      - remove all the exit(1) from loadAppendOnlyFile, as it is the caller
        responsibility to decide what to do in case of failure.
      - move the opening of the AOF file for writing, to be after we loading it.
      - avoid return -ERR in DEBUG LOADAOF, when the AOF is existing but empty
      1677efb9
  13. 10 Jun, 2021 1 commit
    • Binbin's avatar
      Fixed some typos, add a spell check ci and others minor fix (#8890) · 0bfccc55
      Binbin authored
      This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
      This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
      but at least it is also unlikely to cause false positives.
      
      Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
      
      Here's a summary of other changes:
      1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
      2. Outdated function / variable / argument names in comments
      3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
      4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
      5. Some outdated https link URLs.
      6. Fix some outdated comment. Such as:
          - In README: about the rdb, we used to said create a `thread`, change to `process`
          - dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
          - notifyKeyspaceEvent fucntion comment (add type arg)
          - Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
      7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
      0bfccc55
  14. 08 Jun, 2021 1 commit
  15. 07 Jun, 2021 1 commit
  16. 30 May, 2021 2 commits
    • Wang Yuan's avatar
      Make full use of aofrwblock's buf (#8975) · 58a03eca
      Wang Yuan authored
      Make aof rewrite buffer memory size more accurate, before, there may be 20%
      deviation with its real memory usage.
      
      The implication are both lower memory usage, and also a more accurate INFO.
      58a03eca
    • ny0312's avatar
      Always replicate time-to-live(TTL) as absolute timestamps in milliseconds (#8474) · 53d1acd5
      ny0312 authored
      Till now, on replica full-sync we used to transfer absolute time for TTL,
      however when a command arrived (EXPIRE or EXPIREAT),
      we used to propagate it as is to replicas (possibly with relative time),
      but always translate it to EXPIREAT (absolute time) to AOF.
      
      This commit changes that and will always use absolute time for propagation.
      see discussion in #8433
      
      Furthermore, we Introduce new commands: `EXPIRETIME/PEXPIRETIME`
      that allow extracting the absolute TTL time from a key.
      53d1acd5
  17. 17 May, 2021 1 commit
  18. 01 Apr, 2021 1 commit
    • Wang Yuan's avatar
      Handle remaining fsync errors (#8419) · 1eb85249
      Wang Yuan authored
      In `aof.c`, we call fsync when stop aof, and now print a log to let user know that if fail.
      In `cluster.c`, we now return error, the calling function already handles these write errors.
      In `redis-cli.c`, users hope to save rdb, we now print a message if fsync failed.
      In `rio.c`, we now treat fsync errors like we do for write errors. 
      In `server.c`, we try to fsync aof file when shutdown redis, we only can print one log if fail.
      In `bio.c`, if failing to fsync aof file, we will set `aof_bio_fsync_status` to error , and reject writing just like last writing aof error,  moreover also set INFO command field `aof_last_write_status` to error.
      1eb85249
  19. 24 Mar, 2021 1 commit
  20. 14 Mar, 2021 1 commit
  21. 16 Feb, 2021 1 commit
    • uriyage's avatar
      Adds INFO fields to track fork child progress (#8414) · fd052d2a
      uriyage authored
      * Adding current_save_keys_total and current_save_keys_processed info fields.
        Present in replication, BGSAVE and AOFRW.
      * Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
      * Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
        and module forks.
      fd052d2a
  22. 09 Feb, 2021 1 commit
  23. 29 Jan, 2021 1 commit
    • zhaozhao.zz's avatar
      AOF: recover from last write error after turn on appendonly again (#8030) · 49b36633
      zhaozhao.zz authored
      The key point is how to recover from last AOF write error, for example:
      
      1. start redis with appendonly yes, and append some write commands
      
      2. short write or something else error happen, `server.aof_last_write_status` changed to `C_ERR`, now redis doesn't accept write commands
      
      3. execute `CONFIG SET appendonly no` to avoid the above problem, now redis can accept write commands again
      
      4. disk error resolved, and execute `CONFIG SET appendonly yes` to reopen AOF, but `server.aof_last_write_status` cannot be changed to `C_OK` (if background aof rewrite run less then 1 second, it will free `server.aof_buf` and then serverCron cannot fix `aof_last_write_status`), then redis cannot accept write commands forever.
      
      This PR use a simple way to fix it:
      
      1. just free `server.aof_buf` when stop appendonly to save memory, if error happens in `flushAppendOnlyFile(1)`, the `server.aof_buf` may contains some data which has not be written to aof, I think we can ignore it because we turn off the appendonly.
      
      2. reset fsync status after stop appendonly and call `flushAppendOnlyFile` only when `aof_state` is ON
      
      3. reset `server.last_write_status` when reopen aof to accept write commands
      49b36633
  24. 28 Jan, 2021 1 commit
    • Wang Yuan's avatar
      Redis exit for fsync error when the AOF fsync policy is 'always' (#8347) · a16739a3
      Wang Yuan authored
      With AOF policy of fsync "always", redis should respect the contract with the user
      that on acknowledged write data is already synced on disk.
      
      Redis was already exiting for AOF write error,  but don't care about fsync failure.
      So to guarantee data safe, redis should exit for fsync error too (when the AOF fsync
      policy is 'always').
      a16739a3
  25. 27 Jan, 2021 1 commit
    • Raghav Muddur's avatar
      GETEX, GETDEL and SET PXAT/EXAT (#8327) · 0367a808
      Raghav Muddur authored
      This commit introduces two new command and two options for an existing command
      
      GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
      [PXAT milliseconds-timestamp]
      
      The getexCommand() function implements extended options and variants of the GET
      command. Unlike GET command this command is not read-only. Only one of the options
      can be used at a given time.
      
      1. PERSIST removes any TTL associated with the key.
      2. EX Set expiry TTL in seconds.
      3. PX Set expiry TTL in milliseconds.
      4. EXAT Same like EX instead of specifying the number of seconds representing the
          TTL (time to live), it takes an absolute Unix timestamp
      5. PXAT Same like PX instead of specifying the number of milliseconds representing the
          TTL (time to live), it takes an absolute Unix timestamp
      
      Command would return either the bulk string, error or nil.
      
      GETDEL <key>
      Would delete the key after getting.
      
      SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
      [EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
      
      Two new options added here are EXAT and PXAT
      
      Key implementation notes
      - `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
        specified (`PX/EX`), replication will always use `PX`.
      - `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
        as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
        correct AOF translation.
      - `GETEX` without any optional argument behaves like `GET`.
      - `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
      - `GETDEL` command is propagated as `DEL`
      - Combined the validation for `SET` and `GETEX` arguments. 
      - Test cases to validate AOF/Replication propagation
      0367a808
  26. 07 Jan, 2021 2 commits
    • YaacovHazan's avatar
      Report child copy-on-write info continuously · ea930a35
      YaacovHazan authored
      Add INFO field, rdb_active_cow_size, to report COW of a live fork child while
      it's active.
      - once in 1024 keys check the time, and if there's more than one second since
        the last report send a report to the parent via the pipe.
      - refactor the child_info_data struct, it's an implementation detail that
        shouldn't be in the server struct, and not used to communicate data between
        caller and callee
      - remove the magic value from that struct (not sure what it was good for), and
        instead add handling of short reads.
      - add another value to the structure, cow_type, to indicate if the report is
        for the new rdb_active_cow_size field, or it's the last report of a
        successful operation
      - add new Module API to report the active COW
      - add more asserts variants to test.tcl
      ea930a35
    • YaacovHazan's avatar
      Refactory fork child related infra, Unify child pid · f9dacf8a
      YaacovHazan authored
      This is a refactory commit, isn't suppose to have any actual impact.
      it does the following:
      - keep just one server struct fork child pid variable instead of 3
      - have one server struct variable indicating the purpose of the current fork
        child.
      - redisFork is now responsible of updating the server struct with the pid,
        which means it can be the one that calls updateDictResizePolicy
      - move child info pipe handling into redisFork instead of having them
        repeated outside
      - there are two classes of fork purposes, mutually exclusive group (AOF, RDB,
        Module), and one that can create several forks to coexist in parallel (LDB,
        but maybe Modules some day too, Module API allows for that).
      - minor fix to killRDBChild:
        unlike killAppendOnlyChild and TerminateModuleForkChild, the killRDBChild
        doesn't clear the pid variable or call wait4, so checkChildrenDone does
        the cleanup for it.
        This commit removes the explicit calls to rdbRemoveTempFile, closeChildInfoPipe,
        updateDictResizePolicy, which didn't do any harm, but where unnecessary.
      f9dacf8a
  27. 24 Dec, 2020 1 commit
  28. 13 Dec, 2020 2 commits
  29. 17 Nov, 2020 1 commit
    • Meir Shpilraien (Spielrein)'s avatar
      Unified MULTI, LUA, and RM_Call with respect to blocking commands (#8025) · d87a0d02
      Meir Shpilraien (Spielrein) authored
      
      
      Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
      the caller, who executes the command in this context, expects a reply.
      
      Today, LUA and MULTI have a special (and different) treatment to blocking commands:
      
      LUA   - Most commands are marked with no-script flag which are checked when executing
      and command from LUA, commands that are not marked (like XREAD) verify that their
      blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
      MULTI - Command that is going to block, first verify that the client is not inside
      multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
      return a result which is a match to the empty key with no timeout (for example blpop
      inside MULTI will act as lpop)
      For modules that perform RM_Call with blocking command, the returned results type is
      REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
      
      Disadvantages of the current state are:
      
      No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
      Module can not safely execute blocking command (and get reply or error).
      Though It is true that modules are not like LUA or MULTI and should be smarter not
      to execute blocking commands on RM_Call, sometimes you want to execute a command base
      on client input (for example if you create a module that provides a new scripting
      language like javascript or python).
      While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
      REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
      check if the command came from another module using RM_Call. So there is no way
      for a module to know not to block another module RM_Call execution.
      
      This commit adds a way to unify the treatment for blocking clients by introducing
      a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
      turned on to signify that the client should not be blocked. A blocking command
      verifies that the flag is turned off before blocking. If a blocking command sees
      that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
      which are matches to empty key with no timeout (as MULTI does today).
      
      The new flag is checked on the following commands:
      
      List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
      Zset blocking commands: BZPOPMIN, BZPOPMAX
      Stream blocking commands: XREAD, XREADGROUP
      SUBSCRIBE, PSUBSCRIBE, MONITOR
      In addition, the new flag is turned on inside the AOF client, we do not want to
      block the AOF client to prevent deadlocks and commands ordering issues (and there
      is also an existing assert in the code that verifies it).
      
      To keep backward compatibility on LUA, all the no-script flags on existing commands
      were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
      
      To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
      We added a special treatment on those commands to allow executing them on MULTI.
      
      The only backward compatibility issue that this PR introduces is that now MONITOR
      is not allowed inside MULTI.
      
      Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
      or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarItamar Haber <itamar@redislabs.com>
      d87a0d02
  30. 11 Nov, 2020 1 commit
  31. 03 Nov, 2020 1 commit
  32. 28 Oct, 2020 2 commits
  33. 19 Oct, 2020 1 commit
    • Wen Hui's avatar
      fix double fclose in aofrewrite (#7919) · 04a0af90
      Wen Hui authored
      minor fix for a bug which happen on error handling code
      and doesn't look like it could have caused any real harm
      (fd number wouldn't have been reused yet)
      04a0af90
  34. 13 Oct, 2020 1 commit
    • Wang Yuan's avatar
      Remove temporary aof and rdb files in a background thread (#7905) · aaacb8c9
      Wang Yuan authored
      If we fail or stop to rewrite aof, we need to remove temporary aof.
      We also remove temporary rdb when replicas abort to receive rdb.
      But currently we delete them in main thread, to avoid blocking,
      we should use bg_unlink to remove them in a background thread.
      
      Btw, we have already used this way to removed child process temporary rdb.
      aaacb8c9
  35. 05 Oct, 2020 1 commit
    • Oran Agra's avatar
      memory reporting of clients argv (#7874) · bea40e6a
      Oran Agra authored
      track and report memory used by clients argv.
      this is very usaful in case clients started sending a command and didn't
      complete it. in which case the first args of the command are already
      trimmed from the query buffer.
      
      in an effort to avoid cache misses and overheads while keeping track of
      these, i avoid calling sdsZmallocSize and instead use the sdslen /
      bulk-len which can at least give some insight into the problem.
      
      This memory is now added to the total clients memory usage, as well as
      the client list.
      bea40e6a
  36. 24 Sep, 2020 1 commit
    • valentinogeron's avatar
      Stream: Inconsistency between master and replica some XREADGROUP case (#7526) · 795c454d
      valentinogeron authored
      XREADGROUP auto-creates the consumer inside the consumer group the
      first time it saw it.
      When XREADGROUP is being used with NOACK option, the message will not
      be added into the client's PEL and XGROUP SETID would be propagated.
      When the replica gets the XGROUP SETID it will only update the last delivered
      id of the group, but will not create the consumer.
      
      So, in this commit XGROUP CREATECONSUMER is being added.
      Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
      
      When NOACK option is being used, createconsumer command would be
      propagated as well.
      
      In case of AOFREWRITE, consumer with an empty PEL would be saved with
      XGROUP CREATECONSUMER whereas consumer with pending entries would be
      saved with XCLAIM
      795c454d