- 20 Oct, 2021 1 commit
-
-
guybe7 authored
## Intro The purpose is to allow having different flags/ACL categories for subcommands (Example: CONFIG GET is ok-loading but CONFIG SET isn't) We create a small command table for every command that has subcommands and each subcommand has its own flags, etc. (same as a "regular" command) This commit also unites the Redis and the Sentinel command tables ## Affected commands CONFIG Used to have "admin ok-loading ok-stale no-script" Changes: 1. Dropped "ok-loading" in all except GET (this doesn't change behavior since there were checks in the code doing that) XINFO Used to have "read-only random" Changes: 1. Dropped "random" in all except CONSUMERS XGROUP Used to have "write use-memory" Changes: 1. Dropped "use-memory" in all except CREATE and CREATECONSUMER COMMAND No changes. MEMORY Used to have "random read-only" Changes: 1. Dropped "random" in PURGE and USAGE ACL Used to have "admin no-script ok-loading ok-stale" Changes: 1. Dropped "admin" in WHOAMI, GENPASS, and CAT LATENCY No changes. MODULE No changes. SLOWLOG Used to have "admin random ok-loading ok-stale" Changes: 1. Dropped "random" in RESET OBJECT Used to have "read-only random" Changes: 1. Dropped "random" in ENCODING and REFCOUNT SCRIPT Used to have "may-replicate no-script" Changes: 1. Dropped "may-replicate" in all except FLUSH and LOAD CLIENT Used to have "admin no-script random ok-loading ok-stale" Changes: 1. Dropped "random" in all except INFO and LIST 2. Dropped "admin" in ID, TRACKING, CACHING, GETREDIR, INFO, SETNAME, GETNAME, and REPLY STRALGO No changes. PUBSUB No changes. CLUSTER Changes: 1. Dropped "admin in countkeysinslots, getkeysinslot, info, nodes, keyslot, myid, and slots SENTINEL No changes. (note that DEBUG also fits, but we decided not to convert it since it's for debugging and anyway undocumented) ## New sub-command This commit adds another element to the per-command output of COMMAND, describing the list of subcommands, if any (in the same structure as "regular" commands) Also, it adds a new subcommand: ``` COMMAND LIST [FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>)] ``` which returns a set of all commands (unless filters), but excluding subcommands. ## Module API A new module API, RM_CreateSubcommand, was added, in order to allow module writer to define subcommands ## ACL changes: 1. Now, that each subcommand is actually a command, each has its own ACL id. 2. The old mechanism of allowed_subcommands is redundant (blocking/allowing a subcommand is the same as blocking/allowing a regular command), but we had to keep it, to support the widespread usage of allowed_subcommands to block commands with certain args, that aren't subcommands (e.g. "-select +select|0"). 3. I have renamed allowed_subcommands to allowed_firstargs to emphasize the difference. 4. Because subcommands are commands in ACL too, you can now use "-" to block subcommands (e.g. "+client -client|kill"), which wasn't possible in the past. 5. It is also possible to use the allowed_firstargs mechanism with subcommand. For example: `+config -config|set +config|set|loglevel` will block all CONFIG SET except for setting the log level. 6. All of the ACL changes above required some amount of refactoring. ## Misc 1. There are two approaches: Either each subcommand has its own function or all subcommands use the same function, determining what to do according to argv[0]. For now, I took the former approaches only with CONFIG and COMMAND, while other commands use the latter approach (for smaller blamelog diff). 2. Deleted memoryGetKeys: It is no longer needed because MEMORY USAGE now uses the "range" key spec. 4. Bugfix: GETNAME was missing from CLIENT's help message. 5. Sentinel and Redis now use the same table, with the same function pointer. Some commands have a different implementation in Sentinel, so we redirect them (these are ROLE, PUBLISH, and INFO). 6. Command stats now show the stats per subcommand (e.g. instead of stats just for "config" you will have stats for "config|set", "config|get", etc.) 7. It is now possible to use COMMAND directly on subcommands: COMMAND INFO CONFIG|GET (The pipeline syntax was inspired from ACL, and can be used in functions lookupCommandBySds and lookupCommandByCString) 8. STRALGO is now a container command (has "help") ## Breaking changes: 1. Command stats now show the stats per subcommand (see (5) above)
-
- 19 Oct, 2021 2 commits
-
-
qetu3790 authored
Prevent clients from being blocked forever in cluster when they block with their own module command and the hash slot is migrated to another master at the same time. These will get a redirection message when unblocked. Also, release clients blocked on module commands when cluster is down (same as other blocked clients) This commit adds basic tests for the main (non-cluster) redis test infra that test the cluster. This was done because the cluster test infra can't handle some common test features, but most importantly we only build the test modules with the non-cluster test suite. note that rather than really supporting cluster operations by the test infra, it was added (as dup code) in two files, one for module tests and one for non-modules tests, maybe in the future we'll refactor that. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
Wen Hui authored
Make Cluster-bus port configurable with new cluster-port config
-
- 18 Oct, 2021 3 commits
-
-
Viktor Söderqvist authored
The LRU of the key is not touched. Locically expired keys are logically not existing, so they're treated as such.
-
yoav-steinberg authored
Test started failing consistently in 32bit builds after upgrading to jemalloc 5.2.1 (#9623).
-
Oran Agra authored
in the past few days i've seen two failures in the valgrind daily test. *** [err]: slave fails full sync and diskless load swapdb recovers it in tests/integration/replication.tcl Replica didn't get into loading mode can't reproduce it, but i'm hoping it's just too slow (to start loading within 5 seconds)
-
- 17 Oct, 2021 1 commit
-
-
Hanna Fadida authored
This is useful for approximating size computation of complex module types. Note that the mem_usage2 callback is new and has not been released yet, which is why we can modify it.
-
- 16 Oct, 2021 1 commit
-
-
Yossi Gottlieb authored
* Fix test modules linking on macOS 11.x. * Use macOS 10.x for FreeBSD VM as VirtualBox is not yet supported on 11.
-
- 13 Oct, 2021 1 commit
-
-
Madelyn Olson authored
Improved the reliability of cluster replica sync tests
-
- 08 Oct, 2021 1 commit
-
-
Bjorn Svensson authored
-
- 07 Oct, 2021 3 commits
-
-
yoav-steinberg authored
obuf based eviction tests run until eviction occurs instead of assuming a certain amount of writes will fill the obuf enough for eviction to occur. This handles the kernel buffering written data and emptying the obuf even though no one actualy reads from it. The tests have a new timeout of 20sec: if the test doesn't pass after 20 sec it'll fail. Hopefully this enough for our slow CI targets. This also eliminates the need to skip some tests in TLS.
-
Huang Zhw authored
Tracking invalidation messages were sometimes sent in inconsistent order, before the command's reply rather than after. In addition to that, they were sometimes embedded inside other commands responses, like MULTI-EXEC and MGET.
-
GutovskyMaria authored
Hide empty and loading replicas from CLUSTER SLOTS responses
-
- 06 Oct, 2021 1 commit
-
-
yoav-steinberg authored
Flush db and *then* wait for the bgsave to complete.
-
- 05 Oct, 2021 2 commits
-
-
yoav-steinberg authored
* Reduce delay between publishes to allow less time to write the obufs. * More subscribed clients to buffer more data per publish. * Make sure main connection isn't evicted (it has a large qbuf).
-
yoav-steinberg authored
Changes in #9528 lead to memory leak if the command implementation used rewriteClientCommandArgument inside MULTI-EXEC. Adding an explicit test for that case since the test that uncovered it didn't specifically target this scenario
-
- 04 Oct, 2021 5 commits
-
-
Meir Shpilraien (Spielrein) authored
When LUA call our C code, by default, the LUA stack has room for 10 elements. In most cases, this is more than enough but sometimes it's not and the caller must verify the LUA stack size before he pushes elements. On 3 places in the code, there was no verification of the LUA stack size. On specific inputs this missing verification could have lead to invalid memory write: 1. On 'luaReplyToRedisReply', one might return a nested reply that will explode the LUA stack. 2. On 'redisProtocolToLuaType', the Redis reply might be deep enough to explode the LUA stack (notice that currently there is no such command in Redis that returns such a nested reply, but modules might do it) 3. On 'ldbRedis', one might give a command with enough arguments to explode the LUA stack (all the arguments will be pushed to the LUA stack) This commit is solving all those 3 issues by calling 'lua_checkstack' and verify that there is enough room in the LUA stack to push elements. In case 'lua_checkstack' returns an error (there is not enough room in the LUA stack and it's not possible to increase the stack), we will do the following: 1. On 'luaReplyToRedisReply', we will return an error to the user. 2. On 'redisProtocolToLuaType' we will exit with panic (we assume this scenario is rare because it can only happen with a module). 3. On 'ldbRedis', we return an error.
-
Oran Agra authored
The protocol parsing on 'ldbReplParseCommand' (LUA debugging) Assumed protocol correctness. This means that if the following is given: *1 $100 test The parser will try to read additional 94 unallocated bytes after the client buffer. This commit fixes this issue by validating that there are actually enough bytes to read. It also limits the amount of data that can be sent by the debugger client to 1M so the client will not be able to explode the memory. Co-authored-by:
meir@redislabs.com <meir@redislabs.com>
-
Oran Agra authored
- fix possible heap corruption in ziplist and listpack resulting by trying to allocate more than the maximum size of 4GB. - prevent ziplist (hash and zset) from reaching size of above 1GB, will be converted to HT encoding, that's not a useful size. - prevent listpack (stream) from reaching size of above 1GB. - XADD will start a new listpack if the new record may cause the previous listpack to grow over 1GB. - XADD will respond with an error if a single stream record is over 1GB - List type (ziplist in quicklist) was truncating strings that were over 4GB, now it'll respond with an error. Co-authored-by:
sundb <sundbcn@gmail.com>
-
Oran Agra authored
This change sets a low limit for multibulk and bulk length in the protocol for unauthenticated connections, so that they can't easily cause redis to allocate massive amounts of memory by sending just a few characters on the network. The new limits are 10 arguments of 16kb each (instead of 1m of 512mb)
-
YaacovHazan authored
Since we measure the COW size in this test by changing some keys and reading the reported COW size, we need to ensure that the "dismiss mechanism" (#8974) will not free memory and reduce the COW size. For that, this commit changes the size of the keys to 512B (less than a page). and because some keys may fall into the same page, we are modifying ten keys on each iteration and check for at least 50% change in the COW size.
-
- 03 Oct, 2021 2 commits
-
-
yoav-steinberg authored
Note that this breaks compatibility because in the past doing: DECRBY x -9223372036854775808 would succeed (and create an invalid result) and now this returns an error.
-
yoav-steinberg authored
Remove hard coded multi-bulk limit (was 1,048,576), new limit is INT_MAX. When client sends an m-bulk that's higher than 1024, we initially only allocate the argv array for 1024 arguments, and gradually grow that allocation as arguments are received.
-
- 30 Sep, 2021 1 commit
-
-
Hanna Fadida authored
adding an advanced api to enable loading data that was sereialized with a specific encoding version
-
- 29 Sep, 2021 1 commit
-
-
yoav-steinberg authored
-
- 26 Sep, 2021 3 commits
-
-
Oran Agra authored
This was recently broken in #9321 when we validated stream IDs to be integers but did that after to the stepping next record instead of before.
-
yoav-steinberg authored
Fixing CI test issues introduced in #8687 - valgrind warnings in readQueryFromClient when client was freed by processInputBuffer - adding DEBUG pause-cron for tests not to be time dependent. - skipping a test that depends on socket buffers / events not compatible with TLS - making sure client got subscribed by not using deferring client
-
Yossi Gottlieb authored
Empty patterns are not considered and skipped. Also, improve help text.
-
- 24 Sep, 2021 1 commit
-
-
Huang Zhw authored
This will cause the generated string containing "\". Fixes a broken change in #8687
-
- 23 Sep, 2021 4 commits
-
-
Yossi Gottlieb authored
This commit makes it possible to explicitly trim the allocation of a RedisModuleString. Currently, Redis automatically trims strings that have been retained by a module command when it returns. However, this is not thread safe and may result with corruption in threaded modules. Supporting explicit trimming offers a backwards compatible workaround to this problem.
-
yoav-steinberg authored
### Description A mechanism for disconnecting clients when the sum of all connected clients is above a configured limit. This prevents eviction or OOM caused by accumulated used memory between all clients. It's a complimentary mechanism to the `client-output-buffer-limit` mechanism which takes into account not only a single client and not only output buffers but rather all memory used by all clients. #### Design The general design is as following: * We track memory usage of each client, taking into account all memory used by the client (query buffer, output buffer, parsed arguments, etc...). This is kept up to date after reading from the socket, after processing commands and after writing to the socket. * Based on the used memory we sort all clients into buckets. Each bucket contains all clients using up up to x2 memory of the clients in the bucket below it. For example up to 1m clients, up to 2m clients, up to 4m clients, ... * Before processing a command and before sleep we check if we're over the configured limit. If we are we start disconnecting clients from larger buckets downwards until we're under the limit. #### Config `maxmemory-clients` max memory all clients are allowed to consume, above this threshold we disconnect clients. This config can either be set to 0 (meaning no limit), a size in bytes (possibly with MB/GB suffix), or as a percentage of `maxmemory` by using the `%` suffix (e.g. setting it to `10%` would mean 10% of `maxmemory`). #### Important code changes * During the development I encountered yet more situations where our io-threads access global vars. And needed to fix them. I also had to handle keeps the clients sorted into the memory buckets (which are global) while their memory usage changes in the io-thread. To achieve this I decided to simplify how we check if we're in an io-thread and make it much more explicit. I removed the `CLIENT_PENDING_READ` flag used for checking if the client is in an io-thread (it wasn't used for anything else) and just used the global `io_threads_op` variable the same way to check during writes. * I optimized the cleanup of the client from the `clients_pending_read` list on client freeing. We now store a pointer in the `client` struct to this list so we don't need to search in it (`pending_read_list_node`). * Added `evicted_clients` stat to `INFO` command. * Added `CLIENT NO-EVICT ON|OFF` sub command to exclude a specific client from the client eviction mechanism. Added corrosponding 'e' flag in the client info string. * Added `multi-mem` field in the client info string to show how much memory is used up by buffered multi commands. * Client `tot-mem` now accounts for buffered multi-commands, pubsub patterns and channels (partially), tracking prefixes (partially). * CLIENT_CLOSE_ASAP flag is now handled in a new `beforeNextClient()` function so clients will be disconnected between processing different clients and not only before sleep. This new function can be used in the future for work we want to do outside the command processing loop but don't want to wait for all clients to be processed before we get to it. Specifically I wanted to handle output-buffer-limit related closing before we process client eviction in case the two race with each other. * Added a `DEBUG CLIENT-EVICTION` command to print out info about the client eviction buckets. * Each client now holds a pointer to the client eviction memory usage bucket it belongs to and listNode to itself in that bucket for quick removal. * Global `io_threads_op` variable now can contain a `IO_THREADS_OP_IDLE` value indicating no io-threading is currently being executed. * In order to track memory used by each clients in real-time we can't rely on updating these stats in `clientsCron()` alone anymore. So now I call `updateClientMemUsage()` (used to be `clientsCronTrackClientsMemUsage()`) after command processing, after writing data to pubsub clients, after writing the output buffer and after reading from the socket (and maybe other places too). The function is written to be fast. * Clients are evicted if needed (with appropriate log line) in `beforeSleep()` and before processing a command (before performing oom-checks and key-eviction). * All clients memory usage buckets are grouped as follows: * All clients using less than 64k. * 64K..128K * 128K..256K * ... * 2G..4G * All clients using 4g and up. * Added client-eviction.tcl with a bunch of tests for the new mechanism. * Extended maxmemory.tcl to test the interaction between maxmemory and maxmemory-clients settings. * Added an option to flag a numeric configuration variable as a "percent", this means that if we encounter a '%' after the number in the config file (or config set command) we consider it as valid. Such a number is store internally as a negative value. This way an integer value can be interpreted as either a percent (negative) or absolute value (positive). This is useful for example if some numeric configuration can optionally be set to a percentage of something else. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
YaacovHazan authored
This commit introduced a new flag to the RM_Call: 'C' - Check if the command can be executed according to the ACLs associated with it. Also, three new API's added to check if a command, key, or channel can be executed or accessed by a user, according to the ACLs associated with it. - RM_ACLCheckCommandPerm - RM_ACLCheckKeyPerm - RM_ACLCheckChannelPerm The user for these API's is a RedisModuleUser object, that for a Module user returned by the RM_CreateModuleUser API, or for a general ACL user can be retrieved by these two new API's: - RM_GetCurrentUserName - Retrieve the user name of the client connection behind the current context. - RM_GetModuleUserFromUserName - Get a RedisModuleUser from a user name As a result of getting a RedisModuleUser from name, it can now also access the general ACL users (not just ones created by the module). This mean the already existing API RM_SetModuleUserACL(), can be used to change the ACL rules for such users.
-
Binbin authored
This is similar to the recent addition of LMPOP/BLMPOP (#9373), but zset. Syntax for the new ZMPOP command: `ZMPOP numkeys [<key> ...] MIN|MAX [COUNT count]` Syntax for the new BZMPOP command: `BZMPOP timeout numkeys [<key> ...] MIN|MAX [COUNT count]` Some background: - ZPOPMIN/ZPOPMAX take only one key, and can return multiple elements. - BZPOPMIN/BZPOPMAX take multiple keys, but return only one element from just one key. - ZMPOP/BZMPOP can take multiple keys, and can return multiple elements from just one key. Note that ZMPOP/BZMPOP can take multiple keys, it eventually operates on just on key. And it will propagate as ZPOPMIN or ZPOPMAX with the COUNT option. As new commands, if we can not pop any elements, the response like: - ZMPOP: Return a NIL in both RESP2 and RESP3, unlike ZPOPMIN/ZPOPMAX return emptyarray. - BZMPOP: Return a NIL in both RESP2 and RESP3 when timeout is reached, like BZPOPMIN/BZPOPMAX. For the normal response is nested arrays in RESP2 and RESP3: ``` ZMPOP/BZMPOP 1) keyname 2) 1) 1) member1 2) score1 2) 1) member2 2) score2 In RESP2: 1) "myzset" 2) 1) 1) "three" 2) "3" 2) 1) "two" 2) "2" In RESP3: 1) "myzset" 2) 1) 1) "three" 2) (double) 3 2) 1) "two" 2) (double) 2 ```
-
- 22 Sep, 2021 1 commit
-
-
Oran Agra authored
i've seen this CI failure a couple of times on MacOS: *** [err]: lazy free a stream with all types of metadata in tests/unit/lazyfree.tcl lazyfree isn't done only reason i can think of is that 500ms is sometimes not enough on slow systems.
-
- 19 Sep, 2021 1 commit
-
-
Oran Agra authored
-
- 16 Sep, 2021 1 commit
-
-
Binbin authored
Implements the [LIMIT limit] variant of SINTERCARD/ZINTERCARD. Now with the LIMIT, we can stop the searching when cardinality reaching the limit, and return the cardinality ASAP. Note that in SINTERCARD, the old synatx was: `SINTERCARD key [key ...]` In order to add a optional parameter, we must break the old synatx. So the new syntax of SINTERCARD will be consistent with ZINTERCARD. New syntax: `SINTERCARD numkeys key [key ...] [LIMIT limit]`. Note that this means that SINTERCARD has a different syntax than SINTER and SINTERSTORE (taking numkeys argument) As for ZINTERCARD, we can easily add a optional parameter to it. New syntax: `ZINTERCARD numkeys key [key ...] [LIMIT limit]`
-
- 15 Sep, 2021 2 commits
-
-
Wen Hui authored
-
guybe7 authored
Fix #7297 The problem: Today, there is no way for a client library or app to know the key name indexes for commands such as ZUNIONSTORE/EVAL and others with "numkeys", since COMMAND INFO returns no useful info for them. For cluster-aware redis clients, this requires to 'patch' the client library code specifically for each of these commands or to resolve each execution of these commands with COMMAND GETKEYS. The solution: Introducing key specs other than the legacy "range" (first,last,step) The 8th element of the command info array, if exists, holds an array of key specs. The array may be empty, which indicates the command doesn't take any key arguments or may contain one or more key-specs, each one may leads to the discovery of 0 or more key arguments. A client library that doesn't support this key-spec feature will keep using the first,last,step and movablekeys flag which will obviously remain unchanged. A client that supports this key-specs feature needs only to look at the key-specs array. If it finds an unrecognized spec, it must resort to using COMMAND GETKEYS if it wishes to get all key name arguments, but if all it needs is one key in order to know which cluster node to use, then maybe another spec (if the command has several) can supply that, and there's no need to use GETKEYS. Each spec is an array of arguments, first one is the spec name, the second is an array of flags, and the third is an array containing details about the spec (specific meaning for each spec type) The initial flags we support are "read" and "write" indicating if the keys that this key-spec finds are used for read or for write. clients should ignore any unfamiliar flags. In order to easily find the positions of keys in a given array of args we introduce keys specs. There are two logical steps of key specs: 1. `start_search`: Given an array of args, indicate where we should start searching for keys 2. `find_keys`: Given the output of start_search and an array of args, indicate all possible indices of keys. ### start_search step specs - `index`: specify an argument index explicitly - `index`: 0 based index (1 means the first command argument) - `keyword`: specify a string to match in `argv`. We should start searching for keys just after the keyword appears. - `keyword`: the string to search for - `start_search`: an index from which to start the keyword search (can be negative, which means to search from the end) Examples: - `SET` has start_search of type `index` with value `1` - `XREAD` has start_search of type `keyword` with value `[“STREAMS”,1]` - `MIGRATE` has start_search of type `keyword` with value `[“KEYS”,-2]` ### find_keys step specs - `range`: specify `[count, step, limit]`. - `lastkey`: index of the last key. relative to the index returned from begin_search. -1 indicating till the last argument, -2 one before the last - `step`: how many args should we skip after finding a key, in order to find the next one - `limit`: if count is -1, we use limit to stop the search by a factor. 0 and 1 mean no limit. 2 means ½ of the remaining args, 3 means ⅓, and so on. - “keynum”: specify `[keynum_index, first_key_index, step]`. - `keynum_index`: is relative to the return of the `start_search` spec. - `first_key_index`: is relative to `keynum_index`. - `step`: how many args should we skip after finding a key, in order to find the next one Examples: - `SET` has `range` of `[0,1,0]` - `MSET` has `range` of `[-1,2,0]` - `XREAD` has `range` of `[-1,1,2]` - `ZUNION` has `start_search` of type `index` with value `1` and `find_keys` of type `keynum` with value `[0,1,1]` - `AI.DAGRUN` has `start_search` of type `keyword` with value `[“LOAD“,1]` and `find_keys` of type `keynum` with value `[0,1,1]` (see https://oss.redislabs.com/redisai/master/commands/#aidagrun) Note: this solution is not perfect as the module writers can come up with anything, but at least we will be able to find the key args of the vast majority of commands. If one of the above specs can’t describe the key positions, the module writer can always fall back to the `getkeys-api` option. Some keys cannot be found easily (`KEYS` in `MIGRATE`: Imagine the argument for `AUTH` is the string “KEYS” - we will start searching in the wrong index). The guarantee is that the specs may be incomplete (`incomplete` will be specified in the spec to denote that) but we never report false information (assuming the command syntax is correct). For `MIGRATE` we start searching from the end - `startfrom=-1` - and if one of the keys is actually called "keys" we will report only a subset of all keys - hence the `incomplete` flag. Some `incomplete` specs can be completely empty (i.e. UNKNOWN begin_search) which should tell the client that COMMAND GETKEYS (or any other way to get the keys) must be used (Example: For `SORT` there is no way to describe the STORE keyword spec, as the word "store" can appear anywhere in the command). We will expose these key specs in the `COMMAND` command so that clients can learn, on startup, where the keys are for all commands instead of holding hardcoded tables or use `COMMAND GETKEYS` in runtime. Comments: 1. Redis doesn't internally use the new specs, they are only used for COMMAND output. 2. In order to support the current COMMAND INFO format (reply array indices 4, 5, 6) we created a synthetic range, called legacy_range, that, if possible, is built according to the new specs. 3. Redis currently uses only getkeys_proc or the legacy_range to get the keys indices (in COMMAND GETKEYS for example). "incomplete" specs: the command we have issues with are MIGRATE, STRALGO, and SORT for MIGRATE, because the token KEYS, if exists, must be the last token, we can search in reverse. it one of the keys is actually the string "keys" will return just a subset of the keys (hence, it's "incomplete") for SORT and STRALGO we can use this heuristic (the keys can be anywhere in the command) and therefore we added a key spec that is both "incomplete" and of "unknown type" if a client encounters an "incomplete" spec it means that it must find a different way (either COMMAND GETKEYS or have its own parser) to retrieve the keys. please note that all commands, apart from the three mentioned above, have "complete" key specs
-
- 14 Sep, 2021 2 commits
-
-
filipe oliveira authored
- Add `-u <uri>` command line option to support `redis://` URI scheme. - included server connection information object (`struct cliConnInfo`), used to describe an ip:port pair, db num user input, and user:pass to avoid a large number of function arguments. - Using sds on connection info strings for redis-benchmark/redis-cli Co-authored-by:
yoav-steinberg <yoav@monfort.co.il>
-
Viktor Söderqvist authored
List functions operating on elements by index: * RM_ListGet * RM_ListSet * RM_ListInsert * RM_ListDelete Iteration is done using a simple for loop over indices. The index based functions use an internal iterator as an optimization. This is explained in the docs: ``` * Many of the list functions access elements by index. Since a list is in * essence a doubly-linked list, accessing elements by index is generally an * O(N) operation. However, if elements are accessed sequentially or with * indices close together, the functions are optimized to seek the index from * the previous index, rather than seeking from the ends of the list. * * This enables iteration to be done efficiently using a simple for loop: * * long n = RM_ValueLength(key); * for (long i = 0; i < n; i++) { * RedisModuleString *elem = RedisModule_ListGet(key, i); * // Do stuff... * } ```
-