1. 04 Feb, 2014 1 commit
    • antirez's avatar
      CLIENT PAUSE and related API implemented. · 4919a13f
      antirez authored
      The API is one of the bulding blocks of CLUSTER FAILOVER command that
      executes a manual failover in Redis Cluster. However exposed as a
      command that the user can call directly, it makes much simpler to
      upgrade a standalone Redis instance using a slave in a safer way.
      
      The commands works like that:
      
          CLIENT PAUSE <milliesconds>
      
      All the clients that are not slaves and not in MONITOR state are paused
      for the specified number of milliesconds. This means that slaves are
      normally served in the meantime.
      
      At the end of the specified amount of time all the clients are unblocked
      and will continue operations normally. This command has no effects on
      the population of the slow log, since clients are not blocked in the
      middle of operations but only when there is to process new data.
      
      Note that while the clients are unblocked, still new commands are
      accepted and queued in the client buffer, so clients will likely not
      block while writing to the server while the pause is active.
      4919a13f
  2. 03 Feb, 2014 1 commit
  3. 31 Jan, 2014 3 commits
  4. 29 Jan, 2014 1 commit
    • antirez's avatar
      Cluster: function clusterGetSlaveRank() added. · 6f540320
      antirez authored
      Return the number of slaves for the same master having a better
      replication offset of the current slave, that is, the slave "rank" used
      to pick a delay before the request for election.
      6f540320
  5. 14 Jan, 2014 2 commits
    • antirez's avatar
      Cluster: support to read from slave nodes. · 28273394
      antirez authored
      A client can enter a special cluster read-only mode using the READONLY
      command: if the client read from a slave instance after this command,
      for slots that are actually served by the instance's master, the queries
      will be processed without redirection, allowing clients to read from
      slaves (but without any kind fo read-after-write guarantee).
      
      The READWRITE command can be used in order to exit the readonly state.
      28273394
    • antirez's avatar
      Set REDIS_AOF_REWRITE_MIN_SIZE to 64mb. · 51894856
      antirez authored
      64mb is the default value in redis.conf. For some reason instead the
      hard-coded default was 1mb that is too small.
      51894856
  6. 08 Jan, 2014 1 commit
    • antirez's avatar
      Don't send REPLCONF ACK to old masters. · 90a81b4e
      antirez authored
      Masters not understanding REPLCONF ACK will reply with errors to our
      requests causing a number of possible issues.
      
      This commit detects a global replication offest set to -1 at the end of
      the replication, and marks the client representing the master with the
      REDIS_PRE_PSYNC flag.
      
      Note that this flag was called REDIS_PRE_PSYNC_SLAVE but now it is just
      REDIS_PRE_PSYNC as it is used for both slaves and masters starting with
      this commit.
      
      This commit fixes issue #1488.
      90a81b4e
  7. 19 Dec, 2013 1 commit
  8. 11 Dec, 2013 1 commit
  9. 10 Dec, 2013 2 commits
    • antirez's avatar
      Slaves heartbeats during sync improved. · 11120689
      antirez authored
      The previous fix for false positive timeout detected by master was not
      complete. There is another blocking stage while loading data for the
      first synchronization with the master, that is, flushing away the
      current data from the DB memory.
      
      This commit uses the newly introduced dict.c callback in order to make
      some incremental work (to send "\n" heartbeats to the master) while
      flushing the old data from memory.
      
      It is hard to write a regression test for this issue unfortunately. More
      support for debugging in the Redis core would be needed in terms of
      functionalities to simulate a slow DB loading / deletion.
      11120689
    • antirez's avatar
      dict.c: added optional callback to dictEmpty(). · 2eb781b3
      antirez authored
      Redis hash table implementation has many non-blocking features like
      incremental rehashing, however while deleting a large hash table there
      was no way to have a callback called to do some incremental work.
      
      This commit adds this support, as an optiona callback argument to
      dictEmpty() that is currently called at a fixed interval (one time every
      65k deletions).
      2eb781b3
  10. 04 Dec, 2013 1 commit
  11. 03 Dec, 2013 2 commits
  12. 29 Nov, 2013 1 commit
  13. 21 Nov, 2013 1 commit
  14. 19 Nov, 2013 2 commits
  15. 05 Nov, 2013 1 commit
    • antirez's avatar
      SCAN code refactored to parse cursor first. · ebcb6251
      antirez authored
      The previous implementation of SCAN parsed the cursor in the generic
      function implementing SCAN, SSCAN, HSCAN and ZSCAN.
      
      The actual higher-level command implementation only checked for empty
      keys and return ASAP in that case. The result was that inverting the
      arguments of, for instance, SSCAN for example and write:
      
          SSCAN 0 key
      
      Instead of
      
          SSCAN key 0
      
      Resulted into no error, since 0 is a non-existing key name very likely.
      Just the iterator returned no elements at all.
      
      In order to fix this issue the code was refactored to extract the
      function to parse the cursor and return the error. Every higher level
      command implementation now parses the cursor and later checks if the key
      exist or not.
      ebcb6251
  16. 28 Oct, 2013 3 commits
  17. 25 Oct, 2013 1 commit
  18. 09 Oct, 2013 2 commits
  19. 03 Oct, 2013 1 commit
    • antirez's avatar
      Cluster: new clusterDoBeforeSleep() API. · 7afc0dd5
      antirez authored
      The new API is able to remember operations to perform before returning
      to the event loop, such as checking if there is the failover quorum for
      a slave, save and fsync the configuraiton file, and so forth.
      
      Because this operations are performed before returning on the event
      loop we are sure that messages that are sent in the same event loop run
      will be delivered *after* the configuration is already saved, that is a
      requirement sometimes. For instance we want to publish a new epoch only
      when it is already stored in nodes.conf in order to avoid returning back
      in the logical clock when a node is restarted.
      
      This new API provides a big performance advantage compared to saving and
      possibly fsyncing the configuration file multiple times in the same
      event loop run, especially in the case of big clusters with tens or
      hundreds of nodes.
      7afc0dd5
  20. 02 Oct, 2013 1 commit
  21. 30 Sep, 2013 1 commit
  22. 26 Sep, 2013 3 commits
  23. 25 Sep, 2013 1 commit
  24. 20 Sep, 2013 1 commit
    • antirez's avatar
      Cluster: added time field in cluster bus messages. · 925ea9f8
      antirez authored
      The time is sent in requests, and copied back in reply packets.
      This way the receiver can compare the time field in a reply with its
      local clock and check the age of the request associated with this reply.
      
      This is an easy way to discard delayed replies. Note that only a clock
      is used here, that is the one of the node sending the packet. The
      receiver only copies the field back into the reply, so no
      synchronization is needed between clocks of different hosts.
      925ea9f8
  25. 04 Sep, 2013 1 commit
    • antirez's avatar
      Cluster: free HANDSHAKE nodes after node_timeout. · 72587e6c
      antirez authored
      Handshake nodes should turn into normal nodes or be freed in a
      reasonable amount of time, otherwise they'll keep accumulating if the
      address they are associated with is not reachable for some reason.
      72587e6c
  26. 22 Aug, 2013 1 commit
  27. 12 Aug, 2013 1 commit
    • antirez's avatar
      Replication: better way to send a preamble before RDB payload. · 89ffba91
      antirez authored
      During the replication full resynchronization process, the RDB file is
      transfered from the master to the slave. However there is a short
      preamble to send, that is currently just the bulk payload length of the
      file in the usual Redis form $..length..<CR><LF>.
      
      This preamble used to be sent with a direct write call, assuming that
      there was alway room in the socket output buffer to hold the few bytes
      needed, however this does not scale in case we'll need to send more
      stuff, and is not very robust code in general.
      
      This commit introduces a more general mechanism to send a preamble up to
      2GB in size (the max length of an sds string) in a non blocking way.
      89ffba91
  28. 06 Aug, 2013 2 commits