1. 09 Sep, 2016 1 commit
  2. 08 Sep, 2016 1 commit
  3. 07 Sep, 2016 6 commits
  4. 01 Sep, 2016 2 commits
  5. 11 Aug, 2016 1 commit
  6. 05 Aug, 2016 1 commit
  7. 04 Aug, 2016 2 commits
  8. 03 Aug, 2016 5 commits
  9. 02 Aug, 2016 3 commits
  10. 29 Jul, 2016 1 commit
  11. 28 Jul, 2016 1 commit
  12. 27 Jul, 2016 2 commits
    • antirez's avatar
      Ability of slave to announce arbitrary ip/port to master. · 55385f99
      antirez authored
      This feature is useful, especially in deployments using Sentinel in
      order to setup Redis HA, where the slave is executed with NAT or port
      forwarding, so that the auto-detected port/ip addresses, as listed in
      the "INFO replication" output of the master, or as provided by the
      "ROLE" command, don't match the real addresses at which the slave is
      reachable for connections.
      55385f99
    • antirez's avatar
      Multiple GEORADIUS bugs fixed. · 356a6304
      antirez authored
      By grepping the continuous integration errors log a number of GEORADIUS
      tests failures were detected.
      
      Fortunately when a GEORADIUS failure happens, the test suite logs enough
      information in order to reproduce the problem: the PRNG seed,
      coordinates and radius of the query.
      
      By reproducing the issues, three different bugs were discovered and
      fixed in this commit. This commit also improves the already good
      reporting of the fuzzer and adds the failure vectors as regression
      tests.
      
      The issues found:
      
      1. We need larger squares around the poles in order to cover the area
      requested by the user. There were already checks in order to use a
      smaller step (larger squares) but the limit set (+/- 67 degrees) is not
      enough in certain edge cases, so 66 is used now.
      
      2. Even near the equator, when the search area center is very near the
      edge of the square, the north, south, west or ovest square may not be
      able to fully cover the specified radius. Now a test is performed at the
      edge of the initial guessed search area, and larger squares are used in
      case the test fails.
      
      3. Because of rounding errors between Redis and Tcl, sometimes the test
      signaled false positives. This is now addressed.
      
      Whenever possible the original code was improved a bit in other ways. A
      debugging example stanza was added in order to make the next debugging
      session simpler when the next bug is found.
      356a6304
  13. 22 Jul, 2016 3 commits
    • antirez's avatar
      Replication: when possible start RDB saving ASAP. · 03f5b508
      antirez authored
      In a previous commit the replication code was changed in order to
      centralize the BGSAVE for replication trigger in replicationCron(),
      however after further testings, the 1 second delay imposed by this
      change is not acceptable.
      
      So now the BGSAVE is only delayed if the AOF rewriting process is
      active. However past comments made sure that replicationCron() is always
      able to trigger the BGSAVE when needed, making the code generally more
      robust.
      
      The new code is more similar to the initial @oranagra patch where the
      BGSAVE was delayed only if an AOF rewrite was in progress.
      
      Trivia: delaying the BGSAVE uncovered a minor Sentinel issue that is now
      fixed.
      03f5b508
    • antirez's avatar
      8b76d55f
    • antirez's avatar
      Sentinel: check Slave INFO state more often when disconnected. · 3e9ce38b
      antirez authored
      During the initial handshake with the master a slave will report to have
      a very high disconnection time from its master (since technically it was
      disconnected since forever, so the current UNIX time in seconds is
      reported).
      
      However when the slave is connected again the Sentinel may re-scan the
      INFO output again only after 10 seconds, which is a long time. During
      this time Sentinels will consider this instance unable to failover, so
      a useless delay is introduced.
      
      Actaully this hardly happened in the practice because when a slave's
      master is down, the INFO period for slaves changes to 1 second. However
      when a manual failover is attempted immediately after adding slaves
      (like in the case of the Sentinel unit test), this problem may happen.
      
      This commit changes the INFO period to 1 second even in the case the
      slave's master is not down, but the slave reported to be disconnected
      from the master (by publishing, last time we checked, a master
      disconnection time field in INFO).
      
      This change is required as a result of an unrelated change in the
      replication code that adds a small delay in the master-slave first
      synchronization.
      3e9ce38b
  14. 21 Jul, 2016 3 commits
    • antirez's avatar
      Avoid simultaneous RDB and AOF child process. · 0a628e51
      antirez authored
      This patch, written in collaboration with Oran Agra (@oranagra) is a companion
      to 780a8b1d. Together the two patches should avoid that the AOF and RDB saving
      processes can be spawned at the same time. Previously conditions that
      could lead to two saving processes at the same time were:
      
      1. When AOF is enabled via CONFIG SET and an RDB saving process is
         already active.
      
      2. When the SYNC command decides to start an RDB saving process ASAP in
         order to serve a new slave that cannot partially resynchronize (but
         only if we have a disk target for replication, for diskless
         replication there is not such a problem).
      
      Condition "1" is not very severe but "2" can happen often and is
      definitely good at degrading Redis performances in an unexpected way.
      
      The two commits have the effect of always spawning RDB savings for
      replication in replicationCron() instead of attempting to start an RDB
      save synchronously. Moreover when a BGSAVE or AOF rewrite must be
      performed, they are instead just postponed using flags that will try to
      perform such operations ASAP.
      
      Finally the BGSAVE command was modified in order to accept a SCHEDULE
      option so that if an AOF rewrite is in progress, when this option is
      given, the command no longer returns an error, but instead schedules an
      RDB rewrite operation for when it will be possible to start it.
      0a628e51
    • antirez's avatar
      Replication: start BGSAVE for replication always in replicationCron(). · 780a8b1d
      antirez authored
      This makes the replication code conceptually simpler by removing the
      synchronous BGSAVE trigger in syncCommand(). This also means that
      socket and disk BGSAVE targets are handled by the same code.
      780a8b1d
    • antirez's avatar
      e0582b35
  15. 20 Jul, 2016 3 commits
  16. 18 Jul, 2016 5 commits