- 24 Oct, 2022 1 commit
-
-
guybe7 authored
This is a rare failure mode of a new feature of redis 7 introduced in #9217 (when the incremental part of the ID overflows). Till now, the outcome of that error was undetermined (could easily result in `Elements are too large to be stored` wrongly, due to unset `errno`).
-
- 22 Oct, 2022 2 commits
-
-
Binbin authored
Make PFMERGE source key optional in docs, add tests with one input key, add tests on missing source keys (#11205) The following two cases will create an empty destkey HLL: 1. called with no source keys, like `pfmerge destkey` 2. called with non-existing source keys, like `pfmerge destkey non-existing-source-key` In the first case, in `PFMERGE`, the dest key is actually one of the source keys too. So `PFMERGE k1 k2` is equivalent to `SUNIONSTORE k1 k1 k2`, and `PFMERGE k1` is equivalent to `SUNIONSTORE k1 k1`. So the first case is reasonable, the source key is actually optional. And the second case, `PFMERGE` on missing keys should succeed and create an empty dest. This is consistent with `PFCOUNT`, and also with `SUNIONSTORE`, no need to change.
-
sundb authored
In the module, we will reuse the list iterator entry for RM_ListDelete, but `listTypeDelete` will only update `quicklistEntry->zi` but not `quicklistEntry->node`, which will result in `quicklistEntry->node` pointing to a freed memory address if the quicklist node is deleted. This PR sync `key->u.list.index` and `key->u.list.entry` to list iterator after `RM_ListDelete`. This PR also optimizes the release code of the original list iterator. Co-authored-by:
Viktor Söderqvist <viktor@zuiderkwast.se>
-
- 18 Oct, 2022 2 commits
-
-
guybe7 authored
The use case is a module that wants to implement a blocking command on a key that necessarily exists and wants to unblock the client in case the key is deleted (much like what we implemented for XREADGROUP in #10306) New module API: * RedisModule_BlockClientOnKeysWithFlags Flags: * REDISMODULE_BLOCK_UNBLOCK_NONE * REDISMODULE_BLOCK_UNBLOCK_DELETED ### Detailed description of code changes blocked.c: 1. Both module and stream functions are called whether the key exists or not, regardless of its type. We do that in order to allow modules/stream to unblock the client in case the key is no longer present or has changed type (the behavior for streams didn't change, just code that moved into serveClientsBlockedOnStreamKey) 2. Make sure afterCommand is called in serveClientsBlockedOnKeyByModule, in order to propagate actions from moduleTryServeClientBlockedOnKey. 3. handleClientsBlockedOnKeys: call propagatePendingCommands directly after lookupKeyReadWithFlags to prevent a possible lazy-expire DEL from being mixed with any command propagated by the preceding functions. 4. blockForKeys: Caller can specifiy that it wants to be awakened if key is deleted. Minor optimizations (use dictAddRaw). 5. signalKeyAsReady became signalKeyAsReadyLogic which can take a boolean in case the key is deleted. It will only signal if there's at least one client that awaits key deletion (to save calls to handleClientsBlockedOnKeys). Minor optimizations (use dictAddRaw) db.c: 1. scanDatabaseForDeletedStreams is now scanDatabaseForDeletedKeys and will signalKeyAsReady for any key that was removed from the database or changed type. It is the responsibility of the code in blocked.c to ignore or act on deleted/type-changed keys. 2. Use the new signalDeletedKeyAsReady where needed blockedonkey.c + tcl: 1. Added test of new capabilities (FSL.BPOPGT now requires the key to exist in order to work)
-
Meir Shpilraien (Spielrein) authored
### Background The issue is that when saving an RDB with module AUX data, the module AUX metadata (moduleid, when, ...) is saved to the RDB even though the module did not saved any actual data. This prevent loading the RDB in the absence of the module (although there is no actual data in the RDB that requires the module to be loaded). ### Solution The solution suggested in this PR is that module AUX will be saved on the RDB only if the module actually saved something during `aux_save` function. To support backward compatibility, we introduce `aux_save2` callback that acts the same as `aux_save` with the tiny change of avoid saving the aux field if no data was actually saved by the module. Modules can use the new API to make sure that if they have no data to save, then it will be possible to load the created RDB even without the module. ### Concerns A module may register for the aux load and save hooks just in order to be notified when saving or loading starts or completed (there are better ways to do that, but it still possible that someone used it). However, if a module didn't save a single field in the save callback, it means it's not allowed to read in the read callback, since it has no way to distinguish between empty and non-empty payloads. furthermore, it means that if the module did that, it must never change it, since it'll break compatibility with it's old RDB files, so this is really not a valid use case. Since some modules (ones who currently save one field indicating an empty payload), need to know if saving an empty payload is valid, and if Redis is gonna ignore an empty payload or store it, we opted to add a new API (rather than change behavior of an existing API and expect modules to check the redis version) ### Technical Details To avoid saving AUX data on RDB, we change the code to first save the AUX metadata (moduleid, when, ...) into a temporary buffer. The buffer is then flushed to the rio at the first time the module makes a write operation inside the `aux_save` function. If the module saves nothing (and `aux_save2` was used), the entire temporary buffer is simply dropped and no data about this AUX field is saved to the RDB. This make it possible to load the RDB even in the absence of the module. Test was added to verify the fix.
-
- 16 Oct, 2022 2 commits
-
-
Shaya Potter authored
Motivation: for applications that use RM ACL verification functions, they would want to return errors back to the user, in ways that are consistent with Redis. While investigating how we should return ACL errors to the user, we realized that Redis isn't consistent, and currently returns ACL error strings in 3 primary ways. [For the actual implications of this change, see the "Impact" section at the bottom] 1. how it returns an error when calling a command normally ACL_DENIED_CMD -> "this user has no permissions to run the '%s' command" ACL_DENIED_KEY -> "this user has no permissions to access one of the keys used as arguments" ACL_DENIED_CHANNEL -> "this user has no permissions to access one of the channels used as arguments" 2. how it returns an error when calling via 'acl dryrun' command ACL_DENIED_CMD -> "This user has no permissions to run the '%s' command" ACL_DENIED_KEY -> "This user has no permissions to access the '%s' key" ACL_DENIED_CHANNEL -> "This user has no permissions to access the '%s' channel" 3. how it returns an error via RM_Call (and scripting is similar). ACL_DENIED_CMD -> "can't run this command or subcommand"; ACL_DENIED_KEY -> "can't access at least one of the keys mentioned in the command arguments"; ACL_DENIED_CHANNEL -> "can't publish to the channel mentioned in the command"; In addition, if one wants to use RM_Call's "dry run" capability instead of the RM ACL functions directly, one also sees a different problem than it returns ACL errors with a -ERR, not a -PERM, so it can't be returned directly to the caller. This PR modifies the code to generate a base message in a common manner with the ability to set verbose flag for acl dry run errors, and keep it unset for normal/rm_call/script cases ```c sds getAclErrorMessage(int acl_res, user *user, struct redisCommand *cmd, sds errored_val, int verbose) { switch (acl_res) { case ACL_DENIED_CMD: return sdscatfmt(sdsempty(), "User %S has no permissions to run " "the '%S' command", user->name, cmd->fullname); case ACL_DENIED_KEY: if (verbose) { return sdscatfmt(sdsempty(), "User %S has no permissions to access " "the '%S' key", user->name, errored_val); } else { return sdsnew("No permissions to access a key"); } case ACL_DENIED_CHANNEL: if (verbose) { return sdscatfmt(sdsempty(), "User %S has no permissions to access " "the '%S' channel", user->name, errored_val); } else { return sdsnew("No permissions to access a channel"); } } ``` The caller can append/prepend the message (adding NOPERM for normal/RM_Call or indicating it's within a script). Impact: - Plain commands, as well as scripts and RM_Call now include the user name. - ACL DRYRUN remains the only one that's verbose (mentions the offending channel or key name) - Changes RM_Call ACL errors from being a `-ERR` to being `-NOPERM` (besides for textual changes) **This somewhat a breaking change, but it only affects the RM_Call with both `C` and `E`, or `D`** - Changes ACL errors in scripts textually from being `The user executing the script <old non unified text>` to `ACL failure in script: <new unified text>`
-
Meir Shpilraien (Spielrein) authored
As discussed on #11084, `propagatePendingCommands` should happened after the del notification is fired so that the notification effect and the `del` will be replicated inside MULTI EXEC. Test was added to verify the fix.
-
- 15 Oct, 2022 1 commit
-
-
filipe oliveira authored
optimizing d2string() and addReplyDouble() with grisu2: double to string conversion based on Florian Loitsch's Grisu-algorithm (#10587) All commands / use cases that heavily rely on double to a string representation conversion, (e.g. meaning take a double-precision floating-point number like 1.5 and return a string like "1.5" ), could benefit from a performance boost by swapping snprintf(buf,len,"%.17g",value) by the equivalent [fpconv_dtoa](https://github.com/night-shift/fpconv) or any other algorithm that ensures 100% coverage of conversion. This is a well-studied topic and Projects like MongoDB. RedPanda, PyTorch leverage libraries ( fmtlib ) that use the optimized double to string conversion underneath. The positive impact can be substantial. This PR uses the grisu2 approach ( grisu explained on https://www.cs.tufts.edu/~nr/cs257/archive/florian-loitsch/printf.pdf section 5 ). test suite changes: Despite being compatible, in some cases it produces a different result from printf, and some tests had to be adjusted. one case is that `%.17g` (which means %e or %f which ever is shorter), chose to use `5000000000` instead of 5e+9, which sounds like a bug? In other cases, we changed TCL to compare numbers instead of strings to ignore minor rounding issues (`expr 0.8 == 0.79999999999999999`)
-
- 13 Oct, 2022 1 commit
-
-
C Charles authored
MIGTATE with AUTH that contains "keys" is getting wrong key names in migrateGetKeys, leads to ACL errors (#11253) When using the MIGRATE, with a destination Redis that has the user name or password set to the string "keys", Redis would have determine the wrong set of key names the command is gonna access. This lead to ACL returning wrong authentication result. Destination instance: ``` 127.0.0.1:6380> acl setuser default >keys OK 127.0.0.1:6380> acl setuser keys on nopass ~* &* +@all OK ``` Source instance: ``` 127.0.0.1:6379> set a 123 OK 127.0.0.1:6379> acl setuser cc on nopass ~a* +@all OK 127.0.0.1:6379> auth cc 1 OK 127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth keys keys a (error) NOPERM this user has no permissions to access one of the keys used as arguments 127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth2 keys pswd keys a (error) NOPERM this user has no permissions to access one of the keys used as arguments ``` Using `acl dryrun` we know that the parameters of `auth` and `auth2` are mistaken for the `keys` option. ``` 127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth keys keys a "This user has no permissions to access the 'keys' key" 127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth2 keys pswd keys a "This user has no permissions to access the 'pswd' key" ``` Fix the bug by editing db.c/migrateGetKeys function, which finds the `keys` option and all the keys following.
-
- 12 Oct, 2022 1 commit
-
-
Meir Shpilraien (Spielrein) authored
PR #9320 introduces initialization order changes. Now cluster is initialized after modules. This changes causes a crash if the module uses RM_Call inside the load function on cluster mode (the code will try to access `server.cluster` which at this point is NULL). To solve it, separate cluster initialization into 2 phases: 1. Structure initialization that happened before the modules initialization 2. Listener initialization that happened after. Test was added to verify the fix.
-
- 09 Oct, 2022 3 commits
-
-
Binbin authored
The old `server.unixtime*1000000` will overflow in 32-bits. This was introduced in #10300 (not released).
-
Binbin authored
Freeze time during execution of scripts and all other commands. This means that a key is either expired or not, and doesn't change state during a script execution. resolves #10182 This PR try to add a new `commandTimeSnapshot` function. The function logic is extracted from `keyIsExpired`, but the related calls to `fixed_time_expire` and `mstime()` are removed, see below. In commands, we will avoid calling `mstime()` multiple times and just use the one that sampled in call. The background is, e.g. using `PEXPIRE 1` with valgrind sometimes result in the key being deleted rather than expired. The reason is that both `PEXPIRE` command and `checkAlreadyExpired` call `mstime()` separately. There are other more important changes in this PR: 1. Eliminate `fixed_time_expire`, it is no longer needed. When we want to sample time we should always use a time snapshot. We will use `in_nested_call` instead to update the cached time in `call`. 2. Move the call for `updateCachedTime` from `serverCron` to `afterSleep`. Now `commandTimeSnapshot` will always return the sample time, the `lookupKeyReadWithFlags` call in `getNodeByQuery` will get a outdated cached time (because `processCommand` is out of the `call` context). We put the call to `updateCachedTime` in `aftersleep`. 3. Cache the time each time the module lock Redis. Call `updateCachedTime` in `moduleGILAfterLock`, affecting `RM_ThreadSafeContextLock` and `RM_ThreadSafeContextTryLock` Currently the commandTimeSnapshot change affects the following TTL commands: - SET EX / SET PX - EXPIRE / PEXPIRE - SETEX / PSETEX - GETEX EX / GETEX PX - TTL / PTTL - EXPIRETIME / PEXPIRETIME - RESTORE key TTL And other commands just use the cached mstime (including TIME). This is considered to be a breaking change since it can break a script that uses a loop to wait for a key to expire.
-
Meir Shpilraien (Spielrein) authored
As mentioned on docs, `RM_ResetDataset` Performs similar operation to FLUSHALL. As FLUSHALL do not clean the function, `RM_ResetDataset` should not clean the functions as well.
-
- 07 Oct, 2022 1 commit
-
-
aradz44 authored
Added authentication failure and access denied metrics
-
- 06 Oct, 2022 1 commit
-
-
Moti Cohen authored
Refine getTimeoutFromObjectOrReply() out-of-range check. Timeout is parsed (and verifies out of range) as double and multiplied by 1000, added mstime() and stored in long-long which might lead to out-of-range value of long-long. Co-authored-by:
moticless <moticless@github.com> Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
Ozan Tezcan <ozantezcan@gmail.com>
-
- 03 Oct, 2022 2 commits
-
-
Madelyn Olson authored
This PR introduces a couple of changes to improve cluster test stability: 1. Increase the cluster node timeout to 3 seconds, which is similar to the normal cluster tests, but introduce a new mechanism to increase the ping period so that the tests are still fast. This new config is a debug config. 2. Set `cluster-replica-no-failover yes` on a wider array of tests which are sensitive to failovers. This was occurring on the ARM CI.
-
Binbin authored
There is a race condition in the test: ``` *** [err]: redis-cli --cluster add-node with cluster-port in tests/unit/cluster/cli.tcl Expected '5' to be equal to '4' {assert_equal 5 [CI 0 cluster_known_nodes]} proc ::test) ``` When using cli to add node, there can potentially be a race condition in which all nodes presenting cluster state o.k even though the added node did not yet meet all cluster nodes. This comment and the fix were taken from #11221. Also apply it in several other similar places.
-
- 28 Sep, 2022 2 commits
-
-
sundb authored
Fix the missing server.dirty increment and redundant signalModifiedKey in serveClientBlockedOnList (#11326) Mainly fix two minor bug 1. When handle BL*POP/BLMOVE commands with blocked clients, we should increment server.dirty. 2. `listPopRangeAndReplyWithKey()` in `serveClientBlockedOnList()` should not repeat calling `signalModifiedKey()` which has been called when an element was pushed on the list. (was skipped in all bpop commands, other than blmpop) Other optimization add `signal` param for `listElementsRemoved` to skip `signalModifiedKey()` to unify all pop operation. Unifying all pop operations also prepares us for #11303, so that we can avoid having to deal with the conversion from quicklist to listpack() in various places when the list shrinks.
-
guybe7 authored
The original idea behind auto-setting the default (first,last,step) spec was to use the most "open" flags when the user didn't provide any key-spec flags information. While the above idea is a good approach, it really makes no sense to set CMD_KEY_VARIABLE_FLAGS if the user didn't provide the getkeys-api flag: in this case there's not way to retrieve these variable flags, so what's the point? Internally in redis there was code to ignore this already, so this fix doesn't change redis's behavior, it only affects the output of COMMAND command.
-
- 26 Sep, 2022 1 commit
-
-
Ozan Tezcan authored
If a command gets an OOM response and then if we set maxmemory to zero to disable the limit, server.pre_command_oom_state never gets updated and it stays true. As RM_Call() calls with "respect deny-oom" flag checks server.pre_command_oom_state, all calls will fail with OOM. Added server.maxmemory check in RM_Call() to process deny-oom flag only if maxmemory is configured.
-
- 22 Sep, 2022 3 commits
-
-
Shaya Potter authored
Adds a number of user management/ACL validaiton/command execution functions to improve a Redis module's ability to enforce ACLs correctly and easily. * RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both validate ACLs (if requested and set) as well as assign to the client so that scripts executed via RM_Call will have proper ACL validation. * RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP and have it applied to the user * RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump and list). Contains an optimization to cache the stringified version until the underlying ACL is modified. * Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the command, to actually running the command with the right user, so that it also affects commands inside EVAL scripts. see #11231
-
Oran Agra authored
Executing an XAUTOCLAIM command on a stream key in a specific state, with a specially crafted COUNT argument may cause an integer overflow, a subsequent heap overflow, and potentially lead to remote code execution. The problem affects Redis versions 7.0.0 or newer.
-
Binbin authored
Starting from 6.2, after ACL SETUSER user reset, the user will carry the sanitize-payload flag. It was added in #7807, and then ACL SETUSER reset is inconsistent with default newly created user which missing sanitize-payload flag. Same as `off` and `on` these two bits are mutually exclusive, the default created user needs to have sanitize-payload flag. Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser. Note that the bug don't have any real implications, since the code in rdb.c (rdbLoadObject) checks for `USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that `USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters. Added tests to make sure it won't be broken in the future, and updated the comment in ACLSetUser and redis.conf
-
- 21 Sep, 2022 1 commit
-
-
Shay Fadida authored
When using `INFO ALL <section>`, when `section` is a specific module section. Redis will not print the additional section(s). The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 19 Sep, 2022 1 commit
-
-
sundb authored
This PR mainly deals with 2 crashes introduced in #9357, and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode. 1. Fix crash due to deleting an entry from a compress quicklistNode When inserting a large element, we need to create a new quicklistNode first, and then delete its previous element, if the node where the deleted element is located is compressed, it will cause a crash. Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode after some operation, we can use this flag like following: ```c node->dont_compress = 1; /* Prevent to be compressed */ some_operation(node); /* This operation might try to compress this node */ some_other_operation(node); /* We can use this node without decompress it */ node->dont_compress = 0; /* Re-able compression */ quicklistCompressNode(node); ``` Perhaps in the future, we could just disable the current entry from being compressed during the iterator loop, but that would require more work. 2. Fix crash due to wrongly split quicklist before #9357, the offset param of _quicklistSplitNode() will not negative. For now, when offset is negative, the split extent will be wrong. following example: ```c int orig_start = after ? offset + 1 : 0; int orig_extent = after ? -1 : offset; int new_start = after ? 0 : offset; int new_extent = after ? offset + 1 : -1; # offset: -2, after: 1, node->count: 2 # current wrong range: [-1,-1] [0,-1] # correct range: [1,-1] [0, 1] ``` Because only `_quicklistInsert()` splits the quicklistNode and only `quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(), so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash. But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is always positive), so it is not affected. The final conclusion is this crash only occur when we insert a large element with negative index into a list, that affects `LSET` command and `RM_ListSet` module api. 3. In external test mode, we need to restore quicklist packed threshold after when the end of test. 4. Show `node->count` in quicklistRepr(). 5. Add new tcl proc `config_get_set` to support restoring config in tests.
-
- 06 Sep, 2022 1 commit
-
-
ranshid authored
When using cli to add node, there can potentially be a race condition in which all nodes presenting cluster state o.k even though the added node did not yet meet all cluster nodes. this adds another utility function to wait until all cluster nodes see the same cluster size
-
- 05 Sep, 2022 1 commit
-
-
Shaya Potter authored
Add a new "D" flag to RM_Call which runs whatever verification the user requests, but returns before the actual execution of the command. It automatically enables returning error messages as CallReply objects to distinguish success (NULL) from failure (CallReply returned).
-
- 29 Aug, 2022 1 commit
-
-
Oran Agra authored
New test fails on valgrind because strtold("+inf") with valgrind returns a non-inf result same thing is done in incr.tcl.
-
- 28 Aug, 2022 3 commits
-
-
Shaya Potter authored
When RM_Call was used with `M` (reject OOM), `W` (reject writes), as well as `S` (rejecting stale or write commands in "Script mode"), it would have only checked the command flags, but not the declared script flag in case it's a command that runs a script. Refactoring: extracts out similar code in server.c's processCommand to be usable in RM_Call as well.
-
weimeng authored
Bugfix: with the scenario if we force assigned a slot to other master, old master will lose the slot ownership, then old master will call the function delKeysInSlot() to delete all keys which in the slot. These delete operations should replicate to replicas, avoid the data divergence issue in master and replicas. Additionally, in this case, we now call: * signalModifiedKey (to invalidate WATCH) * moduleNotifyKeyspaceEvent (key space notification for modules) * dirty++ (to signal that the persistence file may be outdated) Co-authored-by:
weimeng <weimeng@didiglobal.com> Co-authored-by:
Madelyn Olson <madelyneolson@gmail.com>
-
chendianqiang authored
Check the validity of the value before performing the create operation, prevents new data from being generated even if the request fails to execute. Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
chendianqiang <chendianqiang@meituan.com> Co-authored-by:
Binbin <binloveplay1314@qq.com>
-
- 24 Aug, 2022 3 commits
-
-
Oran Agra authored
Redis 7.0 has #9890 which added an assertion when the propagation queue was not flushed and we got to beforeSleep. But it turns out that when processCommands calls getNodeByQuery and decides to reject the command, it can lead to a key that was lazy expired and is deleted without later flushing the propagation queue. This change prevents lazy expiry from deleting the key at this stage (not as part of a command being processed in `call`)
-
Binbin authored
add a few terms to the white list, and fix a few newly detected typos
-
Meir Shpilraien (Spielrein) authored
The PR reverts the changes made on #10969. The reason for revert was trigger because of occasional test failure that started after the PR was merged. The issue is that if there is a lazy expire during the command invocation, the `del` command is added to the replication stream after the command placeholder. So the logical order on the primary is: * Delete the key (lazy expiration) * Command invocation But the replication stream gets it the other way around: * Command invocation (because the command is written into the placeholder) * Delete the key (lazy expiration) So if the command write to the key that was just lazy expired we will get inconsistency between primary and replica. One solution we considered is to add another lazy expire replication stream and write all the lazy expire there. Then when replicating, we will replicate the lazy expire replication stream first. This will solve this specific test failure but we realize that the issues does not ends here and the more we dig the more problems we find.One of the example we thought about (that can actually crashes Redis) is as follow: * User perform SINTERSTORE * When Redis tries to fetch the second input key it triggers lazy expire * The lazy expire trigger a module logic that deletes the first input key * Now Redis hold the robj of the first input key that was actually freed We believe we took the wrong approach and we will come up with another PR that solve the problem differently, for now we revert the changes so we will not have the tests failure. Notice that not the entire code was revert, some parts of the PR are changes that we would like to keep. The changes that **was** reverted are: * Saving a placeholder for replication at the beginning of the command (`call` function) * Order of the replication stream on active expire and eviction (we will decide how to handle it correctly on follow up PR) * `Spop` changes are no longer needed (because we reverted the placeholder code) Changes that **was not** reverted: * On expire/eviction, wrap the `del` and the notification effect in a multi exec. * `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select. * Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time. Tests: * All tests was kept and only few tests was modify to work correctly with the changes * Test was added to verify that the revert fixes the issues.
-
- 23 Aug, 2022 1 commit
-
-
Oran Agra authored
* Support BUILD_TLS=module to be loaded as a module via config file or command line. e.g. redis-server --loadmodule redis-tls.so * Updates to redismodule.h to allow it to be used side by side with server.h by defining REDISMODULE_CORE_MODULE * Changes to server.h, redismodule.h and module.c to avoid repeated type declarations (gcc 4.8 doesn't like these) * Add a mechanism for non-ABI neutral modules (ones who include server.h) to refuse loading if they detect not being built together with redis (release.c) * Fix wrong signature of RedisModuleDefragFunc, this could break compilation of a module, but not the ABI * Move initialization of listeners in server.c to be after loading the modules * Config TLS after initialization of listeners * Init cluster after initialization of listeners * Add TLS module to CI * Fix a test suite race conditions: Now that the listeners are initialized later, it's not sufficient to wait for the PID message in the log, we need to wait for the "Server Initialized" message. * Fix issues with moduleconfigs test as a result from start_server waiting for "Server Initialized" * Fix issues with modules/infra test as a result of an additional module present Notes about Sentinel: Sentinel can't really rely on the tls module, since it uses hiredis to initiate connections and depends on OpenSSL (won't be able to use any other connection modules for that), so it was decided that when TLS is built as a module, sentinel does not support TLS at all. This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly. Example code of config in redis-tls.so(may be use in the future): RedisModuleString *tls_cfg = NULL; void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) { UNUSED(for_crash_report); RedisModule_InfoAddSection(ctx, ""); RedisModule_InfoAddFieldLongLong(ctx, "var", 42); } int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc) { if (argc != 2) return RedisModule_WrongArity(ctx); return RedisModule_ReplyWithString(ctx, argv[1]); } RedisModuleString *getStringConfigCommand(const char *name, void *privdata) { REDISMODULE_NOT_USED(name); REDISMODULE_NOT_USED(privdata); return tls_cfg; } int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) { REDISMODULE_NOT_USED(name); REDISMODULE_NOT_USED(err); REDISMODULE_NOT_USED(privdata); if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg); RedisModule_RetainString(NULL, new); tls_cfg = new; return REDISMODULE_OK; } int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc) { .... if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR) return REDISMODULE_ERR; if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR) return REDISMODULE_ERR; if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) { if (tls_cfg) { RedisModule_FreeString(ctx, tls_cfg); tls_cfg = NULL; } return REDISMODULE_ERR; } ... } Co-authored-by:
zhenwei pi <pizhenwei@bytedance.com> Signed-off-by:
zhenwei pi <pizhenwei@bytedance.com>
-
- 21 Aug, 2022 1 commit
-
-
Wen Hui authored
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command 1. one test case: XDEL delete multiply id once 2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter, which equal 0 (special positive number), 3 and negative value. Co-authored-by:
Ubuntu <lucas.guang.yang1@huawei.com> Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
Binbin <binloveplay1314@qq.com>
-
- 18 Aug, 2022 3 commits
-
-
Binbin authored
change the cluster-node-timeout from 1 to 1000
-
Binbin authored
Currently, we call zfree(cmd->args), but the argument array needs to be freed recursively (there might be sub-args). Also fixed memory leaks on cmd->tips and cmd->history. Fixes #11145
-
Meir Shpilraien (Spielrein) authored
Fix replication inconsistency on modules that uses key space notifications. ### The Problem In general, key space notifications are invoked after the command logic was executed (this is not always the case, we will discuss later about specific command that do not follow this rules). For example, the `set x 1` will trigger a `set` notification that will be invoked after the `set` logic was performed, so if the notification logic will try to fetch `x`, it will see the new data that was written. Consider the scenario on which the notification logic performs some write commands. for example, the notification logic increase some counter, `incr x{counter}`, indicating how many times `x` was changed. The logical order by which the logic was executed is has follow: ``` set x 1 incr x{counter} ``` The issue is that the `set x 1` command is added to the replication buffer at the end of the command invocation (specifically after the key space notification logic was invoked and performed the `incr` command). The replication/aof sees the commands in the wrong order: ``` incr x{counter} set x 1 ``` In this specific example the order is less important. But if, for example, the notification would have deleted `x` then we would end up with primary-replica inconsistency. ### The Solution Put the command that cause the notification in its rightful place. In the above example, the `set x 1` command logic was executed before the notification logic, so it should be added to the replication buffer before the commands that is invoked by the notification logic. To achieve this, without a major code refactoring, we save a placeholder in the replication buffer, when finishing invoking the command logic we check if the command need to be replicated, and if it does, we use the placeholder to add it to the replication buffer instead of appending it to the end. To be efficient and not allocating memory on each command to save the placeholder, the replication buffer array was modified to reuse memory (instead of allocating it each time we want to replicate commands). Also, to avoid saving a placeholder when not needed, we do it only for WRITE or MAY_REPLICATE commands. #### Additional Fixes * Expire and Eviction notifications: * Expire/Eviction logical order was to first perform the Expire/Eviction and then the notification logic. The replication buffer got this in the other way around (first notification effect and then the `del` command). The PR fixes this issue. * The notification effect and the `del` command was not wrap with `multi-exec` (if needed). The PR also fix this issue. * SPOP command: * On spop, the `spop` notification was fired before the command logic was executed. The change in this PR would have cause the replication order to be change (first `spop` command and then notification `logic`) although the logical order is first the notification logic and then the `spop` logic. The right fix would have been to move the notification to be fired after the command was executed (like all the other commands), but this can be considered a breaking change. To overcome this, the PR keeps the current behavior and changes the `spop` code to keep the right logical order when pushing commands to the replication buffer. Another PR will follow to fix the SPOP properly and match it to the other command (we split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if we chose to). #### Unhanded Known Limitations * key miss event: * On key miss event, if a module performed some write command on the event (using `RM_Call`), the `dirty` counter would increase and the read command that cause the key miss event would be replicated to the replication and aof. This problem can also happened on a write command that open some keys but eventually decides not to perform any action. We decided not to handle this problem on this PR because the solution is complex and will cause additional risks in case we will want to cherry-pick this PR. We should decide if we want to handle it in future PR's. For now, modules writers is advice not to perform any write commands on key miss event. #### Testing * We already have tests to cover cases where a notification is invoking write commands that are also added to the replication buffer, the tests was modified to verify that the replica gets the command in the correct logical order. * Test was added to verify that `spop` behavior was kept unchanged. * Test was added to verify key miss event behave as expected. * Test was added to verify the changes do not break lazy expiration. #### Additional Changes * `propagateNow` function can accept a special dbid, -1, indicating not to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands` function. The side effect of this change is that now the `select` command will appear inside the `multi/exec` block on the replication stream (instead of outside of the `multi/exec` block). Tests was modified to match this new behavior.
-
- 16 Aug, 2022 1 commit
-
-
Valentino Geron authored
Make sure the script calls in the tests declare the keys they intend to use. Do that with minimal changes to existing lines (so many scripts still have a hard coded key names) Co-authored-by:
Valentino Geron <valentino@redis.com>
-