1. 04 Oct, 2021 1 commit
    • Oran Agra's avatar
      Fix ziplist and listpack overflows and truncations (CVE-2021-32627, CVE-2021-32628) (#9589) · c5e6a620
      Oran Agra authored
      
      
      - fix possible heap corruption in ziplist and listpack resulting by trying to
        allocate more than the maximum size of 4GB.
      - prevent ziplist (hash and zset) from reaching size of above 1GB, will be
        converted to HT encoding, that's not a useful size.
      - prevent listpack (stream) from reaching size of above 1GB.
      - XADD will start a new listpack if the new record may cause the previous
        listpack to grow over 1GB.
      - XADD will respond with an error if a single stream record is over 1GB
      - List type (ziplist in quicklist) was truncating strings that were over 4GB,
        now it'll respond with an error.
      Co-authored-by: default avatarsundb <sundbcn@gmail.com>
      c5e6a620
  2. 09 Sep, 2021 1 commit
    • sundb's avatar
      Replace all usage of ziplist with listpack for t_zset (#9366) · 3ca6972e
      sundb authored
      Part two of implementing #8702 (zset), after #8887.
      
      ## Description of the feature
      Replaced all uses of ziplist with listpack in t_zset, and optimized some of the code to optimize performance.
      
      ## Rdb format changes
      New `RDB_TYPE_ZSET_LISTPACK` rdb type.
      
      ## Rdb loading improvements:
      1) Pre-expansion of dict for validation of duplicate data for listpack and ziplist.
      2) Simplifying the release of empty key objects when RDB loading.
      3) Unify ziplist and listpack data verify methods for zset and hash, and move code to rdb.c.
      
      ## Interface changes
      1) New `zset-max-listpack-entries` config is an alias for `zset-max-ziplist-entries` (same with `zset-max-listpack-value`).
      2) OBJECT ENCODING will return listpack instead of ziplist.
      
      ## Listpack improvements:
      1) Add `lpDeleteRange` and `lpDeleteRangeWithEntry` functions to delete a range of entries from listpack.
      2) Improve the performance of `lpCompare`, converting from string to integer is faster than converting from integer to string.
      3) Replace `snprintf` with `ll2string` to improve performance in converting numbers to strings in `lpGet()`.
      
      ## Zset improvements:
      1) Improve the performance of `zzlFind` method, use `lpFind` instead of `lpCompare` in a loop.
      2) Use `lpDeleteRangeWithEntry` instead of `lpDelete` twice to delete a element of zset.
      
      ## Tests
      1) Add some unittests for `lpDeleteRange` and `lpDeleteRangeWithEntry` function.
      2) Add zset RDB loading test.
      3) Add benchmark test for `lpCompare` and `ziplsitCompare`.
      4) Add empty listpack zset corrupt dump test.
      3ca6972e
  3. 10 Mar, 2021 1 commit
    • sundb's avatar
      Add run all test support with define REDIS_TEST (#8570) · 95d6297d
      sundb authored
      1. Add `redis-server test all` support to run all tests.
      2. Add redis test to daily ci.
      3. Add `--accurate` option to run slow tests for more iterations (so that
         by default we run less cycles (shorter time, and less prints).
      4. Move dict benchmark to REDIS_TEST.
      5. fix some leaks in tests
      6. make quicklist tests run on a specific fill set of options rather than huge ranges
      7. move some prints in quicklist test outside their loops to reduce prints
      8. removing sds.h from dict.c since it is now used in both redis-server and
         redis-cli (uses hiredis sds)
      95d6297d
  4. 16 Feb, 2021 1 commit
  5. 07 Feb, 2021 1 commit
    • Oran Agra's avatar
      Optimize HRANDFIELD and ZRANDMEMBER case 4 when ziplist encoded (#8444) · 62b1f320
      Oran Agra authored
      
      
      It is inefficient to repeatedly pick a single random element from a
      ziplist.
      For CASE4, which is when the user requested a low number of unique
      random picks from the collectoin, we used thta pattern.
      
      Now we use a different algorithm that picks unique elements from a
      ziplist, and guarentee no duplicate but doesn't provide random order
      (which is only needed in the non-unique random picks case)
      
      Unrelated changes:
      * change ziplist count and indexes variables to unsigned
      * solve compilation warnings about uninitialized vars in gcc 10.2
      Co-authored-by: default avatarxinluton <xinluton@qq.com>
      62b1f320
  6. 29 Jan, 2021 1 commit
    • Yang Bodong's avatar
      Add HRANDFIELD and ZRANDMEMBER. improvements to SRANDMEMBER (#8297) · b9a0500f
      Yang Bodong authored
      
      
      New commands:
      `HRANDFIELD [<count> [WITHVALUES]]`
      `ZRANDMEMBER [<count> [WITHSCORES]]`
      Algorithms are similar to the one in SRANDMEMBER.
      
      Both return a simple bulk response when no arguments are given, and an array otherwise.
      In case values/scores are requested, RESP2 returns a long array, and RESP3 a nested array.
      note: in all 3 commands, the only option that also provides random order is the one with negative count.
      
      Changes to SRANDMEMBER
      * Optimization when count is 1, we can use the more efficient algorithm of non-unique random
      * optimization: work with sds strings rather than robj
      
      Other changes:
      * zzlGetScore: when zset needs to convert string to double, we use safer memcpy (in
        case the buffer is too small)
      * Solve a "bug" in SRANDMEMBER test: it intended to test a positive count (case 3 or
        case 4) and by accident used a negative count
      Co-authored-by: default avatarxinluton <xinluton@qq.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      b9a0500f
  7. 06 Dec, 2020 2 commits
    • Oran Agra's avatar
      Sanitize dump payload: validate no duplicate records in hash/zset/intset · 3716950c
      Oran Agra authored
      If RESTORE passes successfully with full sanitization, we can't affort
      to crash later on assertion due to duplicate records in a hash when
      converting it form ziplist to dict.
      This means that when doing full sanitization, we must make sure there
      are no duplicate records in any of the collections.
      3716950c
    • Oran Agra's avatar
      Sanitize dump payload: ziplist, listpack, zipmap, intset, stream · ca1c1825
      Oran Agra authored
      When loading an encoded payload we will at least do a shallow validation to
      check that the size that's encoded in the payload matches the size of the
      allocation.
      This let's us later use this encoded size to make sure the various offsets
      inside encoded payload don't reach outside the allocation, if they do, we'll
      assert/panic, but at least we won't segfault or smear memory.
      
      We can also do 'deep' validation which runs on all the records of the encoded
      payload and validates that they don't contain invalid offsets. This lets us
      detect corruptions early and reject a RESTORE command rather than accepting
      it and asserting (crashing) later when accessing that payload via some command.
      
      configuration:
      - adding ACL flag skip-sanitize-payload
      - adding config sanitize-dump-payload [yes/no/clients]
      
      For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
      being slowed down by these sanitation, so i'm setting the default value to `no`,
      but later on it should be set to `clients` by default.
      
      changes:
      - changing rdbReportError not to `exit` in RESTORE command
      - adding a new stat to be able to later check if cluster MIGRATE isn't being
        slowed down by sanitation.
      ca1c1825
  8. 16 Dec, 2016 1 commit
  9. 29 Apr, 2015 1 commit
  10. 02 Jan, 2015 1 commit
    • Matt Stancliff's avatar
      Add ziplistMerge() · 9d2dc024
      Matt Stancliff authored
      This started out as #2158 by sunheehnus, but I kept rewriting it
      until I could understand things more easily and get a few more
      correctness guarantees out of the readability flow.
      
      The original commit created and returned a new ziplist with the contents of
      both input ziplists, but I prefer to grow one of the input ziplists
      and destroy the other one.
      
      So, instead of malloc+copy as in #2158, the merge now reallocs one of
      the existing ziplists and copies the other ziplist into the new space.
      
      Also added merge test cases to ziplistTest()
      9d2dc024
  11. 23 Dec, 2014 2 commits
    • Matt Stancliff's avatar
      Fix ziplistDeleteRange index parameter · 53b1ee34
      Matt Stancliff authored
      It's valid to delete from negative offsets, so we *don't*
      want unsigned arguments here.
      53b1ee34
    • Matt Stancliff's avatar
      Allow all code tests to run using Redis args · 8febcffd
      Matt Stancliff authored
      Previously, many files had individual main() functions for testing,
      but each required being compiled with their own testing flags.
      That gets difficult when you have 8 different flags you need
      to set just to run all tests (plus, some test files required
      other files to be compiled aaginst them, and it seems some didn't
      build at all without including the rest of Redis).
      
      Now all individual test main() funcions are renamed to a test
      function for the file itself and one global REDIS_TEST define enables
      testing across the entire codebase.
      
      Tests can now be run with:
        - `./redis-server test <test>`
      
        e.g. ./redis-server test ziplist
      
      If REDIS_TEST is not defined, then no tests get included and no
      tests are included in the final redis-server binary.
      8febcffd
  12. 08 Nov, 2012 1 commit
  13. 04 Jan, 2012 1 commit
    • Pieter Noordhuis's avatar
      Implements ziplistFind · fe458402
      Pieter Noordhuis authored
      To improve the performance of the ziplist implementation, some
      functions have been converted to macros to avoid unnecessary stack
      movement and duplicate variable assignments.
      fe458402
  14. 28 Feb, 2011 1 commit
  15. 01 Jul, 2010 1 commit
    • antirez's avatar
      redis.c split into many different C files. · e2641e09
      antirez authored
      networking related stuff moved into networking.c
      
      moved more code
      
      more work on layout of source code
      
      SDS instantaneuos memory saving. By Pieter and Salvatore at VMware ;)
      
      cleanly compiling again after the first split, now splitting it in more C files
      
      moving more things around... work in progress
      
      split replication code
      
      splitting more
      
      Sets split
      
      Hash split
      
      replication split
      
      even more splitting
      
      more splitting
      
      minor change
      e2641e09
  16. 09 Jun, 2010 1 commit
  17. 31 May, 2010 3 commits
  18. 29 May, 2010 8 commits