- 30 Jan, 2022 1 commit
-
-
Oran Agra authored
It seems that fix didn't really solve the problem with ASAN, and also introduced issues with other CI runs. unrelated: - make runtest-cluster able to take multiple --single arguments
-
- 24 Jan, 2022 1 commit
-
-
chenyang8094 authored
* Refactor EVAL timeout test * since the test used r config set appendonly yes which generates a rewrite, it missed it's purpose * Fix the bug that start_server returns before redis starts ready, which affects when multiple tests share the same dir. * Elapsed time tracking no loner needed Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 23 Jan, 2022 1 commit
-
-
Binbin authored
Summary of changes: 1. Rename `redisCommand->name` to `redisCommand->declared_name`, it is a const char * for native commands and SDS for module commands. 2. Store the [sub]command fullname in `redisCommand->fullname` (sds). 3. List subcommands in `ACL CAT` 4. List subcommands in `COMMAND LIST` 5. `moduleUnregisterCommands` now will also free the module subcommands. 6. RM_GetCurrentCommandName returns full command name Other changes: 1. Add `addReplyErrorArity` and `addReplyErrorExpireTime` 2. Remove `getFullCommandName` function that now is useless. 3. Some cleanups about `fullname` since now it is SDS. 4. Delete `populateSingleCommand` function from server.h that is useless. 5. Added tests to cover this change. 6. Add some module unload tests and fix the leaks 7. Make error messages uniform, make sure they always contain the full command name and that it's quoted. 7. Fixes some typos see the history in #9504, fixes #10124 Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
guybe7 <guy.benoish@redislabs.com>
-
- 17 Jan, 2022 1 commit
-
-
Oran Agra authored
1. enable diskless replication by default 2. add a new config named repl-diskless-sync-max-replicas that enables replication to start before the full repl-diskless-sync-delay was reached. 3. put replica online sooner on the master (see below) 4. test suite uses repl-diskless-sync-delay of 0 to be faster 5. a few tests that use multiple replica on a pre-populated master, are now using the new repl-diskless-sync-max-replicas 6. fix possible timing issues in a few cluster tests (see below) put replica online sooner on the master ---------------------------------------------------- there were two tests that failed because they needed for the master to realize that the replica is online, but the test code was actually only waiting for the replica to realize it's online, and in diskless it could have been before the master realized it. changes include two things: 1. the tests wait on the right thing 2. issues in the master, putting the replica online in two steps. the master used to put the replica as online in 2 steps. the first step was to mark it as online, and the second step was to enable the write event (only after getting ACK), but in fact the first step didn't contains some of the tasks to put it online (like updating good slave count, and sending the module event). this meant that if a test was waiting to see that the replica is online form the point of view of the master, and then confirm that the module got an event, or that the master has enough good replicas, it could fail due to timing issues. so now the full effect of putting the replica online, happens at once, and only the part about enabling the writes is delayed till the ACK. fix cluster tests -------------------- I added some code to wait for the replica to sync and avoid race conditions. later realized the sentinel and cluster tests where using the original 5 seconds delay, so changed it to 0. this means the other changes are probably not needed, but i suppose they're still better (avoid race conditions)
-
- 05 Jan, 2022 2 commits
-
-
filipe oliveira authored
Added INFO LATENCYSTATS section: latency by percentile distribution/latency by cumulative distribution of latencies (#9462) # Short description The Redis extended latency stats track per command latencies and enables: - exporting the per-command percentile distribution via the `INFO LATENCYSTATS` command. **( percentile distribution is not mergeable between cluster nodes ).** - exporting the per-command cumulative latency distributions via the `LATENCY HISTOGRAM` command. Using the cumulative distribution of latencies we can merge several stats from different cluster nodes to calculate aggregate metrics . By default, the extended latency monitoring is enabled since the overhead of keeping track of the command latency is very small. If you don't want to track extended latency metrics, you can easily disable it at runtime using the command: - `CONFIG SET latency-tracking no` By default, the exported latency percentiles are the p50, p99, and p999. You can alter them at runtime using the command: - `CONFIG SET latency-tracking-info-percentiles "0.0 50.0 100.0"` ## Some details: - The total size per histogram should sit around 40 KiB. We only allocate those 40KiB when a command was called for the first time. - With regards to the WRITE overhead As seen below, there is no measurable overhead on the achievable ops/sec or full latency spectrum on the client. Including also the measured redis-benchmark for unstable vs this branch. - We track from 1 nanosecond to 1 second ( everything above 1 second is considered +Inf ) ## `INFO LATENCYSTATS` exposition format - Format: `latency_percentiles_usec_<CMDNAME>:p0=XX,p50....` ## `LATENCY HISTOGRAM [command ...]` exposition format Return a cumulative distribution of latencies in the format of a histogram for the specified command names. The histogram is composed of a map of time buckets: - Each representing a latency range, between 1 nanosecond and roughly 1 second. - Each bucket covers twice the previous bucket's range. - Empty buckets are not printed. - Everything above 1 sec is considered +Inf. - At max there will be log2(1000000000)=30 buckets We reply a map for each command in the format: `<command name> : { `calls`: <total command calls> , `histogram` : { <bucket 1> : latency , < bucket 2> : latency, ... } }` Co-authored-by:
Oran Agra <oran@redislabs.com>
-
sundb authored
Following #10038. This PR introduces two changes. 1. Show the elapsed time of a single test in the test output, in order to have a more detailed understanding of the changes in test run time. 2. Speedup two tests related to `key-load-delay` configuration. other tests do not seem to be affected by #10003.
-
- 03 Jan, 2022 2 commits
-
-
chenyang8094 authored
Implement Multi-Part AOF mechanism to avoid overheads during AOFRW. Introducing a folder with multiple AOF files tracked by a manifest file. The main issues with the the original AOFRW mechanism are: * buffering of commands that are processed during rewrite (consuming a lot of RAM) * freezes of the main process when the AOFRW completes to drain the remaining part of the buffer and fsync it. * double disk IO for the data that arrives during AOFRW (had to be written to both the old and new AOF files) The main modifications of this PR: 1. Remove the AOF rewrite buffer and related code. 2. Divide the AOF into multiple files, they are classified as two types, one is the the `BASE` type, it represents the full amount of data (Maybe AOF or RDB format) after each AOFRW, there is only one `BASE` file at most. The second is `INCR` type, may have more than one. They represent the incremental commands since the last AOFRW. 3. Use a AOF manifest file to record and manage these AOF files mentioned above. 4. The original configuration of `appendfilename` will be the base part of the new file name, for example: `appendonly.aof.1.base.rdb` and `appendonly.aof.2.incr.aof` 5. Add manifest-related TCL tests, and modified some existing tests that depend on the `appendfilename` 6. Remove the `aof_rewrite_buffer_length` field in info. 7. Add `aof-disable-auto-gc` configuration. By default we're automatically deleting HISTORY type AOFs. It also gives users the opportunity to preserve the history AOFs. just for testing use now. 8. Add AOFRW limiting measure. When the AOFRW failures reaches the threshold (3 times now), we will delay the execution of the next AOFRW by 1 minute. If the next AOFRW also fails, it will be delayed by 2 minutes. The next is 4, 8, 16, the maximum delay is 60 minutes (1 hour). During the limit period, we can still use the 'bgrewriteaof' command to execute AOFRW immediately. 9. Support upgrade (load) data from old version redis. 10. Add `appenddirname` configuration, as the directory name of the append only files. All AOF files and manifest file will be placed in this directory. 11. Only the last AOF file (BASE or INCR) can be truncated. Otherwise redis will exit even if `aof-load-truncated` is enabled. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
Harkrishn Patro authored
This commit implements a sharded pubsub implementation based off of shard channels. Co-authored-by:
Harkrishn Patro <harkrisp@amazon.com> Co-authored-by:
Madelyn Olson <madelyneolson@gmail.com>
-
- 02 Jan, 2022 1 commit
-
-
Viktor Söderqvist authored
To avoid data loss, this commit adds a grace period for lagging replicas to catch up the replication offset. Done: * Wait for replicas when shutdown is triggered by SIGTERM and SIGINT. * Wait for replicas when shutdown is triggered by the SHUTDOWN command. A new blocked client type BLOCKED_SHUTDOWN is introduced, allowing multiple clients to call SHUTDOWN in parallel. Note that they don't expect a response unless an error happens and shutdown is aborted. * Log warning for each replica lagging behind when finishing shutdown. * CLIENT_PAUSE_WRITE while waiting for replicas. * Configurable grace period 'shutdown-timeout' in seconds (default 10). * New flags for the SHUTDOWN command: - NOW disables the grace period for lagging replicas. - FORCE ignores errors writing the RDB or AOF files which would normally prevent a shutdown. - ABORT cancels ongoing shutdown. Can't be combined with other flags. * New field in the output of the INFO command: 'shutdown_in_milliseconds'. The value is the remaining maximum time to wait for lagging replicas before finishing the shutdown. This field is present in the Server section **only** during shutdown. Not directly related: * When shutting down, if there is an AOF saving child, it is killed **even** if AOF is disabled. This can happen if BGREWRITEAOF is used when AOF is off. * Client pause now has end time and type (WRITE or ALL) per purpose. The different pause purposes are *CLIENT PAUSE command*, *failover* and *shutdown*. If clients are unpaused for one purpose, it doesn't affect client pause for other purposes. For example, the CLIENT UNPAUSE command doesn't affect client pause initiated by the failover or shutdown procedures. A completed failover or a failed shutdown doesn't unpause clients paused by the CLIENT PAUSE command. Notes: * DEBUG RESTART doesn't wait for replicas. * We already have a warning logged when a replica disconnects. This means that if any replica connection is lost during the shutdown, it is either logged as disconnected or as lagging at the time of exit. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 27 Dec, 2021 1 commit
-
-
chenyang8094 authored
It turns out that libc malloc can return an allocation of a different size on requests of the same size. this means that matching MEMORY USAGE of one key to another copy of the same data can fail. Solution: Keep running the test that calls MEMORY USAGE, but ignore the response. We do that by introducing a new utility function to get the memory usage, which always returns 1 when the allocator is not jemalloc. Other changes: Some formatting for datatype2.tcl Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 22 Dec, 2021 1 commit
-
-
Oran Agra authored
issue started failing after #9878 was merged (made an exiting test more sensitive) looks like #9982 didn't help, tested this one and it seems to work better. this commit does two things: 1. reduce the extra delay i added earlier and instead add more keys, the effect no duration of replication is the same, but the intervals in which the server is responsive to the tcl client is higher. 2. improve the test infra to print context when assert_error fails.
-
- 19 Dec, 2021 2 commits
-
-
Oran Agra authored
- add needs:debug flag for some tests - disable "save" in external tests (speedup?) - use debug_digest proc instead of debug command directly so it can be skipped - use OBJECT ENCODING instead of DEBUG OBJECT to get encoding - add a proc for OBJECT REFCOUNT so it can be skipped - move a bunch of tests in latency_monitor tests to happen later so that latency monitor has some values in it - add missing close_replication_stream calls - make sure to close the temp client if DEBUG LOG fails
-
YaacovHazan authored
Block sensitive configs and commands by default. * `enable-protected-configs` - block modification of configs with the new `PROTECTED_CONFIG` flag. Currently we add this flag to `dbfilename`, and `dir` configs, all of which are non-mutable configs that can set a file redis will write to. * `enable-debug-command` - block the `DEBUG` command * `enable-module-command` - block the `MODULE` command These have a default value set to `no`, so that these features are not exposed by default to client connections, and can only be set by modifying the config file. Users can change each of these to either `yes` (allow all access), or `local` (allow access from local TCP connections and unix domain connections) Note that this is a **breaking change** (specifically the part about MODULE command being disabled by default). I.e. we don't consider DEBUG command being blocked as an issue (people shouldn't have been using it), and the few configs we protected are unlikely to have been set at runtime anyway. On the other hand, it's likely to assume some users who use modules, load them from the config file anyway. Note that's the whole point of this PR, for redis to be more secure by default and reduce the attack surface on innocent users, so secure defaults will necessarily mean a breaking change.
-
- 17 Dec, 2021 1 commit
-
-
ny0312 authored
Introduce memory management on cluster link buffers: * Introduce a new `cluster-link-sendbuf-limit` config that caps memory usage of cluster bus link send buffers. * Introduce a new `CLUSTER LINKS` command that displays current TCP links to/from peers. * Introduce a new `mem_cluster_links` field under `INFO` command output, which displays the overall memory usage by all current cluster links. * Introduce a new `total_cluster_links_buffer_limit_exceeded` field under `CLUSTER INFO` command output, which displays the accumulated count of cluster links freed due to `cluster-link-sendbuf-limit`.
-
- 16 Dec, 2021 1 commit
-
-
Meir Shpilraien (Spielrein) authored
Added `FUNCTION FLUSH` command. The new sub-command allows delete all the functions. An optional `[SYNC|ASYNC]` argument can be given to control whether or not to flush the functions synchronously or asynchronously. if not given the default flush mode is chosen by `lazyfree-lazy-user-flush` configuration values. Add the missing `functions.tcl` test to the list of tests that are executed in test_helper.tcl, and call FUNCTION FLUSH in between servers in external mode
-
- 13 Dec, 2021 1 commit
-
-
yoav-steinberg authored
This caused a crash when adding elements larger than 2GB to a set (same goes for hash keys). See #8455. Details: * The fix makes the dict hash functions receive a `size_t` instead of an `int`. In practice the dict hash functions call siphash which receives a `size_t` and the callers to the hash function pass a `size_t` to it so the fix is trivial. * The issue was recreated by attempting to add a >2gb value to a set. Appropriate tests were added where I create a set with large elements and check basic functionality on it (SADD, SCARD, SPOP, etc...). * When I added the tests I also refactored a bit all the tests code which is run under the `--large-memory` flag. This removed code duplication for the test framework's `write_big_bulk` and `write_big_bulk` code and also takes care of not allocating the test frameworks helper huge string used by these tests when not run under `--large-memory`. * I also added the _violoations.tcl_ unit tests to be part of the entire test suite and leaned up non relevant list related tests that were in there. This was done in this PR because most of the _violations_ tests are "large memory" tests.
-
- 18 Nov, 2021 1 commit
-
-
guybe7 authored
Drop the STRALGO command, now LCS is a command of its own and it only works on keys (not input strings). The motivation is that STRALGO's syntax was really messed-up... - assumes all (future) string algorithms will take similar arguments - mixes command that takes keys and one that doesn't in the same command. - make it nearly impossible to expose the right key spec in COMMAND INFO (issues cluster clients) - hard for cluster clients to determine the key names (firstkey, lastkey, etc) - hard for ACL / flags (is it a read command?) This is a breaking change.
-
- 15 Nov, 2021 1 commit
-
-
yoav-steinberg authored
Two issues: 1. In many tests we simply forgot to close the connections we created, which doesn't matter for normal tests where the server is killed, but creates a leak on external server tests. 2. When calling `start_server` on external test we create a fresh connection instead of really starting a new server, but never clean it at the end.
-
- 11 Nov, 2021 2 commits
-
-
Ozan Tezcan authored
- Added sanitizer support. `address`, `undefined` and `thread` sanitizers are available. - To build Redis with desired sanitizer : `make SANITIZER=undefined` - There were some sanitizer findings, cleaned up codebase - Added tests with address and undefined behavior sanitizers to daily CI. - Added tests with address sanitizer to the per-PR CI (smoke out mem leaks sooner). Basically, there are three types of issues : **1- Unaligned load/store** : Most probably, this issue may cause a crash on a platform that does not support unaligned access. Redis does unaligned access only on supported platforms. **2- Signed integer overflow.** Although, signed overflow issue can be problematic time to time and change how compiler generates code, current findings mostly about signed shift or simple addition overflow. For most platforms Redis can be compiled for, this wouldn't cause any issue as far as I can tell (checked generated code on godbolt.org). **3 -Minor leak** (redis-cli), **use-after-free**(just before calling exit()); UB means nothing guaranteed and risky to reason about program behavior but I don't think any of the fixes here worth backporting. As sanitizers are now part of the CI, preventing new issues will be the real benefit.
-
yoav-steinberg authored
On test failure store the external redis server logs as CI artifacts so we can review them. Write test name to server log for external server tests. This is attempted and silently failed in case external server doesn't support it. Note that in non-external server mode we use a more robust method of writing to the log which doesn't depend on the server actually running/working. This isn't possible for externl servers and required for some complex tests which are skipped in external mode anyway. Cleanup: remove dup code.
-
- 07 Nov, 2021 1 commit
-
-
chendianqiang authored
Optimized port detection for tcl, use 'socket -server' instead of 'socket' to rule out port on TIME_WAIT Co-authored-by:
chendianqiang <chendianqiang@meituan.com> Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 03 Nov, 2021 1 commit
-
-
perryitay authored
Redis lists are stored in quicklist, which is currently a linked list of ziplists. Ziplists are limited to storing elements no larger than 4GB, so when bigger items are added they're getting truncated. This PR changes quicklists so that they're capable of storing large items in quicklist nodes that are plain string buffers rather than ziplist. As part of the PR there were few other changes in redis: 1. new DEBUG sub-commands: - QUICKLIST-PACKED-THRESHOLD - set the threshold of for the node type to be plan or ziplist. default (1GB) - QUICKLIST <key> - Shows low level info about the quicklist encoding of <key> 2. rdb format change: - A new type was added - RDB_TYPE_LIST_QUICKLIST_2 . - container type (packed / plain) was added to the beginning of the rdb object (before the actual node list). 3. testing: - Tests that requires over 100MB will be by default skipped. a new flag was added to 'runtest' to run the large memory tests (not used by default) Co-authored-by:
sundb <sundbcn@gmail.com> Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 02 Nov, 2021 1 commit
-
-
Oran Agra authored
The External tests started failing recently for unclear reason: ``` *** [err]: Tracking invalidation message of eviction keys should be before response in tests/unit/tracking.tcl Expected '0' to be equal to 'invalidate volatile-key' (context: type eval line 21 cmd {assert_equal $res {invalidate volatile-key}} proc ::test) ``` I suspect the issue is that the used_memory sample is taken while a lazy free is still being processed.
-
- 26 Oct, 2021 1 commit
-
-
Oran Agra authored
I recently started seeing a lot of empty valgrind reports in the daily CI. i.e. prints showing valgrind header but no leak report, which causes the tests to fail https://github.com/redis/redis/runs/3991335416?check_suite_focus=true This commit change 2 things: * first, considering valgrind is just slow, we used to give processes 60 seconds timeout on shutdown instead of 10 seconds we give normally. this commit changes that to 120. * secondly, when we reach the timeout, we first try to use SIGSEGV so that maybe we'll get a stack trace indicating where redis is hang, and we only resort to SIGKILL if double that time passed. note that if there are indeed hang processes, we will normally not see that in the non-valgrind runs, since the tests didn't use to detect any failure in that case, and now they will since `crashlog_from_file` is run after `kill_server`.
-
- 26 Sep, 2021 2 commits
-
-
yoav-steinberg authored
Fixing CI test issues introduced in #8687 - valgrind warnings in readQueryFromClient when client was freed by processInputBuffer - adding DEBUG pause-cron for tests not to be time dependent. - skipping a test that depends on socket buffers / events not compatible with TLS - making sure client got subscribed by not using deferring client
-
Yossi Gottlieb authored
Empty patterns are not considered and skipped. Also, improve help text.
-
- 24 Sep, 2021 1 commit
-
-
Huang Zhw authored
This will cause the generated string containing "\". Fixes a broken change in #8687
-
- 23 Sep, 2021 1 commit
-
-
yoav-steinberg authored
### Description A mechanism for disconnecting clients when the sum of all connected clients is above a configured limit. This prevents eviction or OOM caused by accumulated used memory between all clients. It's a complimentary mechanism to the `client-output-buffer-limit` mechanism which takes into account not only a single client and not only output buffers but rather all memory used by all clients. #### Design The general design is as following: * We track memory usage of each client, taking into account all memory used by the client (query buffer, output buffer, parsed arguments, etc...). This is kept up to date after reading from the socket, after processing commands and after writing to the socket. * Based on the used memory we sort all clients into buckets. Each bucket contains all clients using up up to x2 memory of the clients in the bucket below it. For example up to 1m clients, up to 2m clients, up to 4m clients, ... * Before processing a command and before sleep we check if we're over the configured limit. If we are we start disconnecting clients from larger buckets downwards until we're under the limit. #### Config `maxmemory-clients` max memory all clients are allowed to consume, above this threshold we disconnect clients. This config can either be set to 0 (meaning no limit), a size in bytes (possibly with MB/GB suffix), or as a percentage of `maxmemory` by using the `%` suffix (e.g. setting it to `10%` would mean 10% of `maxmemory`). #### Important code changes * During the development I encountered yet more situations where our io-threads access global vars. And needed to fix them. I also had to handle keeps the clients sorted into the memory buckets (which are global) while their memory usage changes in the io-thread. To achieve this I decided to simplify how we check if we're in an io-thread and make it much more explicit. I removed the `CLIENT_PENDING_READ` flag used for checking if the client is in an io-thread (it wasn't used for anything else) and just used the global `io_threads_op` variable the same way to check during writes. * I optimized the cleanup of the client from the `clients_pending_read` list on client freeing. We now store a pointer in the `client` struct to this list so we don't need to search in it (`pending_read_list_node`). * Added `evicted_clients` stat to `INFO` command. * Added `CLIENT NO-EVICT ON|OFF` sub command to exclude a specific client from the client eviction mechanism. Added corrosponding 'e' flag in the client info string. * Added `multi-mem` field in the client info string to show how much memory is used up by buffered multi commands. * Client `tot-mem` now accounts for buffered multi-commands, pubsub patterns and channels (partially), tracking prefixes (partially). * CLIENT_CLOSE_ASAP flag is now handled in a new `beforeNextClient()` function so clients will be disconnected between processing different clients and not only before sleep. This new function can be used in the future for work we want to do outside the command processing loop but don't want to wait for all clients to be processed before we get to it. Specifically I wanted to handle output-buffer-limit related closing before we process client eviction in case the two race with each other. * Added a `DEBUG CLIENT-EVICTION` command to print out info about the client eviction buckets. * Each client now holds a pointer to the client eviction memory usage bucket it belongs to and listNode to itself in that bucket for quick removal. * Global `io_threads_op` variable now can contain a `IO_THREADS_OP_IDLE` value indicating no io-threading is currently being executed. * In order to track memory used by each clients in real-time we can't rely on updating these stats in `clientsCron()` alone anymore. So now I call `updateClientMemUsage()` (used to be `clientsCronTrackClientsMemUsage()`) after command processing, after writing data to pubsub clients, after writing the output buffer and after reading from the socket (and maybe other places too). The function is written to be fast. * Clients are evicted if needed (with appropriate log line) in `beforeSleep()` and before processing a command (before performing oom-checks and key-eviction). * All clients memory usage buckets are grouped as follows: * All clients using less than 64k. * 64K..128K * 128K..256K * ... * 2G..4G * All clients using 4g and up. * Added client-eviction.tcl with a bunch of tests for the new mechanism. * Extended maxmemory.tcl to test the interaction between maxmemory and maxmemory-clients settings. * Added an option to flag a numeric configuration variable as a "percent", this means that if we encounter a '%' after the number in the config file (or config set command) we consider it as valid. Such a number is store internally as a negative value. This way an integer value can be interpreted as either a percent (negative) or absolute value (positive). This is useful for example if some numeric configuration can optionally be set to a percentage of something else. Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 14 Sep, 2021 1 commit
-
-
filipe oliveira authored
- Add `-u <uri>` command line option to support `redis://` URI scheme. - included server connection information object (`struct cliConnInfo`), used to describe an ip:port pair, db num user input, and user:pass to avoid a large number of function arguments. - Using sds on connection info strings for redis-benchmark/redis-cli Co-authored-by:
yoav-steinberg <yoav@monfort.co.il>
-
- 13 Sep, 2021 1 commit
-
-
yoav-steinberg authored
* On `kill_server` make sure we close the default `"client"` connection. * Don't reconnect when trying to execute the client's `close` command. * On `restart_server` make sure to remove the (closed) default `"client"` after killing the old server.
-
- 12 Sep, 2021 1 commit
-
-
Huang Zhw authored
Make bitpos/bitcount support bit index: ``` BITPOS key bit [start [end [BIT|BYTE]]] BITCOUNT key [start end [BIT|BYTE]] ``` The default behavior is `BYTE`, so these commands are still compatible with old.
-
- 10 Aug, 2021 1 commit
-
-
yoav-steinberg authored
-
- 05 Aug, 2021 1 commit
-
-
Oran Agra authored
The execution of the RPOPLPUSH command by the fuzzer created junk keys, that were later being selected by RANDOMKEY and modified. This also meant that lists were statistically tested more than other files. Fix the fuzzer not to pass junk key names to RPOPLPUSH, and add a check that detects that new keys are not added by the fuzzer to detect future similar issues.
-
- 04 Aug, 2021 1 commit
-
-
Meir Shpilraien (Spielrein) authored
## Current state 1. Lua has its own parser that handles parsing `reds.call` replies and translates them to Lua objects that can be used by the user Lua code. The parser partially handles resp3 (missing big number, verbatim, attribute, ...) 2. Modules have their own parser that handles parsing `RM_Call` replies and translates them to RedisModuleCallReply objects. The parser does not support resp3. In addition, in the future, we want to add Redis Function (#8693) that will probably support more languages. At some point maintaining so many parsers will stop scaling (bug fixes and protocol changes will need to be applied on all of them). We will probably end up with different parsers that support different parts of the resp protocol (like we already have today with Lua and modules) ## PR Changes This PR attempt to unified the reply parsing of Lua and modules (and in the future Redis Function) by introducing a new parser unit (`resp_parser.c`). The new parser handles parsing the reply and calls different callbacks to allow the users (another unit that uses the parser, i.e, Lua, modules, or Redis Function) to analyze the reply. ### Lua API Additions The code that handles reply parsing on `scripting.c` was removed. Instead, it uses the resp_parser to parse and create a Lua object out of the reply. As mentioned above the Lua parser did not handle parsing big numbers, verbatim, and attribute. The new parser can handle those and so Lua also gets it for free. Those are translated to Lua objects in the following way: 1. Big Number - Lua table `{'big_number':'<str representation for big number>'}` 2. Verbatim - Lua table `{'verbatim_string':{'format':'<verbatim format>', 'string':'<verbatim string value>'}}` 3. Attribute - currently ignored and not expose to the Lua parser, another issue will be open to decide how to expose it. Tests were added to check resp3 reply parsing on Lua ### Modules API Additions The reply parsing code on `module.c` was also removed and the new resp_parser is used instead. In addition, the RedisModuleCallReply was also extracted to a separate unit located on `call_reply.c` (in the future, this unit will also be used by Redis Function). A nice side effect of unified parsing is that modules now also support resp3. Resp3 can be enabled by giving `3` as a parameter to the fmt argument of `RM_Call`. It is also possible to give `0`, which will indicate an auto mode. i.e, Redis will automatically chose the reply protocol base on the current client set on the RedisModuleCtx (this mode will mostly be used when the module want to pass the reply to the client as is). In addition, the following RedisModuleAPI were added to allow analyzing resp3 replies: * New RedisModuleCallReply types: * `REDISMODULE_REPLY_MAP` * `REDISMODULE_REPLY_SET` * `REDISMODULE_REPLY_BOOL` * `REDISMODULE_REPLY_DOUBLE` * `REDISMODULE_REPLY_BIG_NUMBER` * `REDISMODULE_REPLY_VERBATIM_STRING` * `REDISMODULE_REPLY_ATTRIBUTE` * New RedisModuleAPI: * `RedisModule_CallReplyDouble` - getting double value from resp3 double reply * `RedisModule_CallReplyBool` - getting boolean value from resp3 boolean reply * `RedisModule_CallReplyBigNumber` - getting big number value from resp3 big number reply * `RedisModule_CallReplyVerbatim` - getting format and value from resp3 verbatim reply * `RedisModule_CallReplySetElement` - getting element from resp3 set reply * `RedisModule_CallReplyMapElement` - getting key and value from resp3 map reply * `RedisModule_CallReplyAttribute` - getting a reply attribute * `RedisModule_CallReplyAttributeElement` - getting key and value from resp3 attribute reply * New context flags: * `REDISMODULE_CTX_FLAGS_RESP3` - indicate that the client is using resp3 Tests were added to check the new RedisModuleAPI ### Modules API Changes * RM_ReplyWithCallReply might return REDISMODULE_ERR if the given CallReply is in resp3 but the client expects resp2. This is not a breaking change because in order to get a resp3 CallReply one needs to specifically specify `3` as a parameter to the fmt argument of `RM_Call` (as mentioned above). Tests were added to check this change ### More small Additions * Added `debug set-disable-deny-scripts` that allows to turn on and off the commands no-script flag protection. This is used by the Lua resp3 tests so it will be possible to run `debug protocol` and check the resp3 parsing code. Co-authored-by:
Oran Agra <oran@redislabs.com> Co-authored-by:
Yossi Gottlieb <yossigo@gmail.com>
-
- 03 Aug, 2021 1 commit
-
-
Ariel Shtul authored
Add new Module APS for RESP3 responses: - RM_ReplyWithMap - RM_ReplyWithSet - RM_ReplyWithAttribute - RM_ReplySetMapLength - RM_ReplySetSetLength - RM_ReplySetAttributeLength - RM_ReplyWithBool Deprecate REDISMODULE_POSTPONED_ARRAY_LEN in favor of a generic REDISMODULE_POSTPONED_LEN Improve documentation Add tests Co-authored-by:
Guy Benoish <guy.benoish@redislabs.com> Co-authored-by:
Oran Agra <oran@redislabs.com>
-
- 29 Jul, 2021 1 commit
-
-
Wen Hui authored
The issue is that when a sentinel with the same address and IP is turned on with a different runid, its port is set to 0 but it is still present in the dictionary master->sentinels which contain all the sentinels for a master. This causes a problem when we do INFO SENTINEL because it takes the size of the dictionary of sentinels. This might also cause a problem for failover if enough sentinels have their port set to 0 since the number of voters in failover is also determined by the size of the dictionary of sentinels. This commits removes the sentinels with the port set to zero from the dictionary of sentinels. Fixes #8786
-
- 14 Jul, 2021 1 commit
-
-
Oran Agra authored
- promote the code in DEBUG PROTOCOL to addReplyBigNum - DEBUG PROTOCOL ATTRIB skips the attribute when client is RESP2 - networking.c addReply for push and attributes generate assertion when called on a RESP2 client, anything else would produce a broken protocol that clients can't handle.
-
- 04 Jul, 2021 1 commit
-
-
Oran Agra authored
This makes it possible to distinguish between null response and an empty array (currently the tests infra translates both to an empty string/list)
-
- 22 Jun, 2021 1 commit
-
-
Yossi Gottlieb authored
* Specifying an empty `bind ""` configuration prevents Redis from listening on any TCP port. Before this commit, such configuration was not accepted. * Using `CONFIG GET bind` will always return an explicit configuration value. Before this commit, if a bind address was not specified the returned value was empty (which was an anomaly). Another behavior change is that modifying the `bind` configuration to a non-default value will NO LONGER DISABLE protected-mode implicitly.
-
- 10 Jun, 2021 1 commit
-
-
Binbin authored
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes. This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything, but at least it is also unlikely to cause false positives. Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use. Here's a summary of other changes: 1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces). 2. Outdated function / variable / argument names in comments 3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString. 4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751 5. Some outdated https link URLs. 6. Fix some outdated comment. Such as: - In README: about the rdb, we used to said create a `thread`, change to `process` - dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey) - notifyKeyspaceEvent fucntion comment (add type arg) - Some others minor fix in comment (Most of them are incorrectly quoted by variable names) 7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
-