- 29 Apr, 2015 1 commit
-
-
antirez authored
This commit allows to avoid two mstime() calls inside the call() function, when the following conditions are true: 1. slowlog is disabled. 2. latency monitoring is disabled. 3. command time acconuting is disabled. Note that '3' was not configurable, this patch just disable it without really allowing the user to turn it on, since this is currently an experiment. If the commit will be merged into unstable, proper support to configure this parameter will be added. Related to issue #2552.
-
- 09 Jan, 2015 1 commit
-
-
antirez authored
-
- 03 Dec, 2014 2 commits
- 11 Nov, 2014 1 commit
-
-
antirez authored
RDB EOF detection was relying on the final part of the RDB transfer to be a magic 40 bytes EOF marker. However as the slave is put online immediately, and because of sockets timeouts, the replication stream is actually contiguous with the RDB file. This means that to detect the EOF correctly we should either: 1) Scan all the stream searching for the mark. Sucks CPU-wise. 2) Start to send the replication stream only after an acknowledge. 3) Implement a proper chunked encoding. For now solution "2" was picked, so the master does not start to send ASAP the stream of commands in the case of diskless replication. We wait for the first REPLCONF ACK command from the slave, that certifies us that the slave correctly loaded the RDB file and is ready to get more data.
-
- 29 Oct, 2014 9 commits
-
-
antirez authored
-
antirez authored
-
antirez authored
-
antirez authored
-
antirez authored
-
antirez authored
-
antirez authored
-
antirez authored
We need to remember what is the saving strategy of the current RDB child process, since the configuration may be modified at runtime via CONFIG SET and still we'll need to understand, when the child exists, what to do and for what goal the process was initiated: to create an RDB file on disk or to write stuff directly to slave's sockets.
-
antirez authored
During the replication full resynchronization process, the RDB file is transfered from the master to the slave. However there is a short preamble to send, that is currently just the bulk payload length of the file in the usual Redis form $..length..<CR><LF>. This preamble used to be sent with a direct write call, assuming that there was alway room in the socket output buffer to hold the few bytes needed, however this does not scale in case we'll need to send more stuff, and is not very robust code in general. This commit introduces a more general mechanism to send a preamble up to 2GB in size (the max length of an sds string) in a non blocking way.
-
- 06 Oct, 2014 1 commit
-
-
xuxiang authored
Closes #1386
-
- 08 Sep, 2014 1 commit
-
-
antirez authored
-
- 27 Aug, 2014 5 commits
-
-
antirez authored
-
charsyam authored
Also moves acceptHandler() to be near the other accept...() functions. Closes #1105
-
cubicdaiya authored
According to the C standard, it is desirable to give the type 'void' to functions have no argument. Closes #1631
-
antirez authored
-
siahl authored
Closes #1900
-
- 18 Jul, 2014 1 commit
-
-
antirez authored
The code tested many times if a client had active Pub/Sub subscriptions by checking the length of a list and dictionary where the patterns and channels are stored. This was substituted with a client flag called REDIS_PUBSUB that is simpler to test for. Moreover in order to manage this flag some code was refactored. This commit is believed to have no effects in the behavior of the server.
-
- 09 Jul, 2014 6 commits
-
-
antirez authored
-
antirez authored
-
antirez authored
It is not a good idea to bloat the code with gettimeofday() calls if the instance is working well, and turning monitoring on at runtime is a joke.
-
antirez authored
-
antirez authored
We introduce the distinction between slow and fast commands since those are two different sources of latency. An O(1) or O(log N) command without side effects (can't trigger deletion of large objects as a side effect of its execution) if delayed is a symptom of inherent latency of the system. A non-fast command (commands that may run large O(N) computations) if delayed may just mean that the user is executing slow operations. The advices LATENCY should provide in this two different cases are different, so we log the two classes of commands in a separated way.
-
antirez authored
-
- 27 Jun, 2014 2 commits
-
-
antirez authored
-
Matt Stancliff authored
COMMANDS returns a nested multibulk reply for each command in the command table. The reply for each command contains: - command name - arity - array of command flags - start key position - end key position - key offset step - optional: if the keys are not deterministic and Redis uses an internal key evaluation function, the 6th field appears and is defined as a status reply of: REQUIRES ARGUMENT PARSING Cluster clients need to know where the keys are in each command to implement proper routing to cluster nodes. Redis commands can have multiple keys, keys at offset steps, or other issues where you can't always assume the first element after the command name is the cluster routing key. Using the information exposed by COMMANDS, client implementations can have live, accurate key extraction details for all commands. Also implements COMMANDS INFO [commands...] to return only a specific set of commands instead of all 160+ commands live in Redis.
-
- 26 Jun, 2014 1 commit
-
-
antirez authored
-
- 23 Jun, 2014 1 commit
-
-
Matt Stancliff authored
We need to access (bindaddr[0] || NULL) in a few places, so centralize access with a nice macro.
-
- 21 Jun, 2014 5 commits
-
-
antirez authored
-
antirez authored
This will be used by CLIENT KILL and is also a good way to ensure a given client is still the same across CLIENT LIST calls. The output of CLIENT LIST was modified to include the new ID, but this change is considered to be backward compatible as the API does not imply you can do positional parsing, since each filed as a different name.
-
antirez authored
Because of output buffer limits Redis internals had this idea of type of clients: normal, pubsub, slave. It is possible to set different output buffer limits for the three kinds of clients. However all the macros and API were named after output buffer limit classes, while the idea of a client type is a generic one that can be reused. This commit does two things: 1) Rename the API and defines with more general names. 2) Change the class of clients executing the MONITOR command from "slave" to "normal". "2" is a good idea because you want to have very special settings for slaves, that are not a good idea for MONITOR clients that are instead normal clients even if they are conceptually slave-alike (since it is a push protocol). The backward-compatibility breakage resulting from "2" is considered to be minimal to care, since MONITOR is a debugging command, and because anyway this change is not going to break the format or the behavior, but just when a connection is closed on big output buffer issues.
-
antirez authored
The new ROLE command is designed in order to provide a client with informations about the replication in a fast and easy to use way compared to the INFO command where the same information is also available.
-
antirez authored
This commit adds peer ID caching in the client structure plus an API change and the use of sdsMakeRoomFor() in order to improve the reallocation pattern to generate the CLIENT LIST output. Both the changes account for a very significant speedup.
-
- 09 Jun, 2014 1 commit
-
-
Matt Stancliff authored
Behrad Zari discovered [1] and Josiah reported [2]: if you block and wait for a list to exist, but the list creates from a non-push command, the blocked client never gets notified. This commit adds notification of blocked clients into the DB layer and away from individual commands. Lists can be created by [LR]PUSH, SORT..STORE, RENAME, MOVE, and RESTORE. Previously, blocked client notifications were only triggered by [LR]PUSH. Your client would never get notified if a list were created by SORT..STORE or RENAME or a RESTORE, etc. Blocked client notification now happens in one unified place: - dbAdd() triggers notification when adding a list to the DB Two new tests are added that fail prior to this commit. All test pass. Fixes #1668 [1]: https://groups.google.com/forum/#!topic/redis-db/k4oWfMkN1NU [2]: #1668
-
- 22 May, 2014 1 commit
-
-
antirez authored
When we are blocked and a few events a processed from time to time, it is smarter to call the event handler a few times in order to handle the accept, read, write, close cycle of a client in a single pass, otherwise there is too much latency added for clients to receive a reply while the server is busy in some way (for example during the DB loading).
-
- 18 Apr, 2014 1 commit
-
-
antirez authored
-