1. 10 Jan, 2022 1 commit
  2. 09 Jan, 2022 1 commit
    • Binbin's avatar
      Fix crash when error [sub]command name contains | (#10082) · a84c964d
      Binbin authored
      The following error commands will crash redis-server:
      ```
      > get|
      Error: Server closed the connection
      > get|set
      Error: Server closed the connection
      > get|other
      ```
      
      The reason is in #9504, we use `lookupCommandBySds` for find the
      container command. And it split the command (argv[0]) with `|`.
      If we input something like `get|other`, after the split, `get`
      will become a valid command name, pass the `ERR unknown command`
      check, and finally crash in `addReplySubcommandSyntaxError`
      
      In this case we do not need to split the command name with `|`
      and just look in the commands dict to find if `argv[0]` is a
      container command.
      
      So this commit introduce a new function call `isContainerCommandBySds`
      that it will return true if a command name is a container command.
      
      Also with the old code, there is a incorrect error message:
      ```
      > config|get set
      (error) ERR Unknown subcommand or wrong number of arguments for 'set'. Try CONFIG|GET HELP.
      ```
      
      The crash was reported in #10070.
      a84c964d
  3. 06 Jan, 2022 2 commits
    • Meir Shpilraien (Spielrein)'s avatar
      Redis Function Libraries (#10004) · 885f6b5c
      Meir Shpilraien (Spielrein) authored
      # Redis Function Libraries
      
      This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906.
      
      Libraries purpose is to provide a better code sharing between functions by allowing to create multiple
      functions in a single command. Functions that were created together can safely share code between
      each other without worrying about compatibility issues and versioning.
      
      Creating a new library is done using 'FUNCTION LOAD' command (full API is described below)
      
      This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library:
      * name - name of the library
      * engine - engine used to create the library
      * code - library code
      * description - library description
      * functions - the functions exposed by the library
      
      When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo.
      Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo.
      As a result, the engine will create one or more functions by calling 'libraryCreateFunction'.
      The new funcion will be added to the newly created libraryInfo. So far Everything is happening
      locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply
      freeing the libraryInfo. After the library info is fully constructed we start the joining phase by
      which we will join the new library to the other libraries currently exist on Redis.
      The joining phase make sure there is no function collision and add the library to the
      librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact
      same way as functionCtx was used (with respect to RDB loading, replicatio, ...).
      The only difference is that apart from function dictionary (maps function name to functionInfo
      object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object.
      
      ## New API
      ### FUNCTION LOAD
      `FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>`
      Create a new library with the given parameters:
      * ENGINE - REPLACE Engine name to use to create the library.
      * LIBRARY NAME - The new library name.
      * REPLACE - If the library already exists, replace it.
      * DESCRIPTION - Library description.
      * CODE - Library code.
      
      Return "OK" on success, or error on the following cases:
      * Library name already taken and REPLACE was not used
      * Name collision with another existing library (even if replace was uses)
      * Library registration failed by the engine (usually compilation error)
      
      ## Changed API
      ### FUNCTION LIST
      `FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]`
      Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer
      needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to
      only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries.
      
      ### INFO MEMORY
      Added number of libraries to `INFO MEMORY`
      
      ### Commands flags
      `DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands
      as commands that add new data to the dateset (functions are data) and so we want to disallows
      to run those commands on OOM.
      
      ## Removed API
      * FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906
      * FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899
      
      ## Lua engine changes
      When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call
      this run the loading run. Loading run is not a usual script run, it is not possible to invoke any
      Redis command from within the load run.
      Instead there is a new API provided by `library` object. The new API's: 
      * `redis.log` - behave the same as `redis.log`
      * `redis.register_function` - register a new function to the library
      
      The loading run purpose is to register functions using the new `redis.register_function` API.
      Any attempt to use any other API will result in an error. In addition, the load run is has a time
      limit of 500ms, error is raise on timeout and the entire operation is aborted.
      
      ### `redis.register_function`
      `redis.register_function(<function_name>, <callback>, [<description>])`
      This new API allows users to register a new function that will be linked to the newly created library.
      This API can only be called during the load run (see definition above). Any attempt to use it outside
      of the load run will result in an error.
      The parameters pass to the API are:
      * function_name - Function name (must be a Lua string)
      * callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro
      * description - Function description, optional (must be a Lua string).
      
      ### Example
      The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively:
      ```
      local function f1(keys, args)
          return 1
      end
      
      local function f2(keys, args)
          return 2
      end
      
      redis.register_function('f1', f1)
      redis.register_function('f2', f2)
      ```
      
      Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the
      functions and not as global.
      
      ### Technical Details
      
      On the load run we only want the user to be able to call a white list on API's. This way, in
      the future, if new API's will be added, the new API's will not be available to the load run
      unless specifically added to this white list. We put the while list on the `library` object and
      make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set
      the `globals` of a function (and all the function it creates). Before starting the load run we
      create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure
      to set global protection on this table just like the general global protection already exists
      today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv)
      to set `g` as the global table of the load run. After the load run finished we update `g`
      metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals),
      we also pop out the `library` object as we do not need it anymore.
      This way, any function that was created on the load run (and will be invoke using `fcall`) will
      see the default globals as it expected to see them and will not have the `library` API anymore.
      
      An important outcome of this new approach is that now we can achieve a distinct global table
      for each library (it is not yet like that but it is very easy to achieve it now). In the future we can
      decide to remove global protection because global on different libraries will not collide or we
      can chose to give different API to different libraries base on some configuration or input.
      
      Notice that this technique was meant to prevent errors and was not meant to prevent malicious
      user from exploit it. For example, the load run can still save the `library` object on some local
      variable and then using in `fcall` context. To prevent such a malicious use, the C code also make
      sure it is running in the right context and if not raise an error.
      885f6b5c
    • Ozan Tezcan's avatar
      Set errno to EEXIST in redisFork() if child process exists (#10059) · 568c2e03
      Ozan Tezcan authored
      Callers of redisFork() are logging `strerror(errno)` on failure.
      `errno` is not set when there is already a child process, causing printing
      current value of errno which was set before `redisFork()` call. 
      
      Setting errno to EEXIST on this failure to provide more meaningful error message. 
      568c2e03
  4. 05 Jan, 2022 1 commit
    • filipe oliveira's avatar
      Added INFO LATENCYSTATS section: latency by percentile distribution/latency by... · 5dd15443
      filipe oliveira authored
      
      Added INFO LATENCYSTATS section: latency by percentile distribution/latency by cumulative distribution of latencies (#9462)
      
      # Short description
      
      The Redis extended latency stats track per command latencies and enables:
      - exporting the per-command percentile distribution via the `INFO LATENCYSTATS` command.
        **( percentile distribution is not mergeable between cluster nodes ).**
      - exporting the per-command cumulative latency distributions via the `LATENCY HISTOGRAM` command.
        Using the cumulative distribution of latencies we can merge several stats from different cluster nodes
        to calculate aggregate metrics .
      
      By default, the extended latency monitoring is enabled since the overhead of keeping track of the
      command latency is very small.
       
      If you don't want to track extended latency metrics, you can easily disable it at runtime using the command:
       - `CONFIG SET latency-tracking no`
      
      By default, the exported latency percentiles are the p50, p99, and p999.
      You can alter them at runtime using the command:
      - `CONFIG SET latency-tracking-info-percentiles "0.0 50.0 100.0"`
      
      
      ## Some details:
      - The total size per histogram should sit around 40 KiB. We only allocate those 40KiB when a command
        was called for the first time.
      - With regards to the WRITE overhead As seen below, there is no measurable overhead on the achievable
        ops/sec or full latency spectrum on the client. Including also the measured redis-benchmark for unstable
        vs this branch. 
      - We track from 1 nanosecond to 1 second ( everything above 1 second is considered +Inf )
      
      ## `INFO LATENCYSTATS` exposition format
      
         - Format: `latency_percentiles_usec_<CMDNAME>:p0=XX,p50....` 
      
      ## `LATENCY HISTOGRAM [command ...]` exposition format
      
      Return a cumulative distribution of latencies in the format of a histogram for the specified command names.
      
      The histogram is composed of a map of time buckets:
      - Each representing a latency range, between 1 nanosecond and roughly 1 second.
      - Each bucket covers twice the previous bucket's range.
      - Empty buckets are not printed.
      - Everything above 1 sec is considered +Inf.
      - At max there will be log2(1000000000)=30 buckets
      
      We reply a map for each command in the format:
      `<command name> : { `calls`: <total command calls> , `histogram` : { <bucket 1> : latency , < bucket 2> : latency, ...  } }`
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      5dd15443
  5. 04 Jan, 2022 2 commits
    • yoav-steinberg's avatar
      `redis-cli --replica` reads dummy empty rdb instead of full snapshot (#10044) · 65a76357
      yoav-steinberg authored
      This makes redis-cli --replica much faster and reduces COW/fork risks on server side.
      This commit also improves the RDB filtering via REPLCONF rdb-filter-only to support no "include" specifiers at all.
      65a76357
    • guybe7's avatar
      Ban snapshot-creating commands and other admin commands from transactions (#10015) · ac84b1cd
      guybe7 authored
      
      
      Creating fork (or even a foreground SAVE) during a transaction breaks the atomicity of the transaction.
      In addition to that, it could mess up the propagated transaction to the AOF file.
      
      This change blocks SAVE, PSYNC, SYNC and SHUTDOWN from being executed inside MULTI-EXEC.
      It does that by adding a command flag, so that modules can flag their commands with that flag too.
      
      Besides it changes BGSAVE, BGREWRITEAOF, and CONFIG SET appendonly, to turn the
      scheduled flag instead of forking righ taway.
      
      Other changes:
      * expose `protected`, `no-async-loading`, and `no_multi` flags in COMMAND command
      * add a test to validate propagation of FLUSHALL inside a transaction.
      * add a test to validate how CONFIG SET that errors reacts in a transaction
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      ac84b1cd
  6. 03 Jan, 2022 4 commits
    • chenyang8094's avatar
      Implement Multi Part AOF mechanism to avoid AOFRW overheads. (#9788) · 87789fae
      chenyang8094 authored
      
      
      Implement Multi-Part AOF mechanism to avoid overheads during AOFRW.
      Introducing a folder with multiple AOF files tracked by a manifest file.
      
      The main issues with the the original AOFRW mechanism are:
      * buffering of commands that are processed during rewrite (consuming a lot of RAM)
      * freezes of the main process when the AOFRW completes to drain the remaining part of the buffer and fsync it.
      * double disk IO for the data that arrives during AOFRW (had to be written to both the old and new AOF files)
      
      The main modifications of this PR:
      1. Remove the AOF rewrite buffer and related code.
      2. Divide the AOF into multiple files, they are classified as two types, one is the the `BASE` type,
        it represents the full amount of data (Maybe AOF or RDB format) after each AOFRW, there is only
        one `BASE` file at most. The second is `INCR` type, may have more than one. They represent the
        incremental commands since the last AOFRW.
      3. Use a AOF manifest file to record and manage these AOF files mentioned above.
      4. The original configuration of `appendfilename` will be the base part of the new file name, for example:
        `appendonly.aof.1.base.rdb` and `appendonly.aof.2.incr.aof`
      5. Add manifest-related TCL tests, and modified some existing tests that depend on the `appendfilename`
      6. Remove the `aof_rewrite_buffer_length` field in info.
      7. Add `aof-disable-auto-gc` configuration. By default we're automatically deleting HISTORY type AOFs.
        It also gives users the opportunity to preserve the history AOFs. just for testing use now.
      8. Add AOFRW limiting measure. When the AOFRW failures reaches the threshold (3 times now),
        we will delay the execution of the next AOFRW by 1 minute. If the next AOFRW also fails, it will be
        delayed by 2 minutes. The next is 4, 8, 16, the maximum delay is 60 minutes (1 hour). During the limit
        period, we can still use the 'bgrewriteaof' command to execute AOFRW immediately.
      9. Support upgrade (load) data from old version redis.
      10. Add `appenddirname` configuration, as the directory name of the append only files. All AOF files and
        manifest file will be placed in this directory.
      11. Only the last AOF file (BASE or INCR) can be truncated. Otherwise redis will exit even if
        `aof-load-truncated` is enabled.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      87789fae
    • Meir Shpilraien (Spielrein)'s avatar
      Fix OOM error not raised of functions (#10048) · 78a62c01
      Meir Shpilraien (Spielrein) authored
      OOM Error did not raise on functions due to a bug.
      Added test to verify the fix.
      78a62c01
    • Madelyn Olson's avatar
      Implement clusterbus message extensions and cluster hostname support (#9530) · 5460c100
      Madelyn Olson authored
      Implement the ability for cluster nodes to advertise their location with extension messages.
      5460c100
    • Harkrishn Patro's avatar
      Sharded pubsub implementation (#8621) · 9f888576
      Harkrishn Patro authored
      
      
      This commit implements a sharded pubsub implementation based off of shard channels.
      Co-authored-by: default avatarHarkrishn Patro <harkrisp@amazon.com>
      Co-authored-by: default avatarMadelyn Olson <madelyneolson@gmail.com>
      9f888576
  7. 02 Jan, 2022 3 commits
    • Joey from AWS's avatar
      Report slot to keys map size in MEMORY STATS in cluster mode (#10017) · 09c668f2
      Joey from AWS authored
      Report slot to keys map size in MEMORY STATS in cluster mode
      Report dictMetadataSize in MEMORY USAGE command as well
      09c668f2
    • Viktor Söderqvist's avatar
      Wait for replicas when shutting down (#9872) · 45a155bd
      Viktor Söderqvist authored
      
      
      To avoid data loss, this commit adds a grace period for lagging replicas to
      catch up the replication offset.
      
      Done:
      
      * Wait for replicas when shutdown is triggered by SIGTERM and SIGINT.
      
      * Wait for replicas when shutdown is triggered by the SHUTDOWN command. A new
        blocked client type BLOCKED_SHUTDOWN is introduced, allowing multiple clients
        to call SHUTDOWN in parallel.
        Note that they don't expect a response unless an error happens and shutdown is aborted.
      
      * Log warning for each replica lagging behind when finishing shutdown.
      
      * CLIENT_PAUSE_WRITE while waiting for replicas.
      
      * Configurable grace period 'shutdown-timeout' in seconds (default 10).
      
      * New flags for the SHUTDOWN command:
      
          - NOW disables the grace period for lagging replicas.
      
          - FORCE ignores errors writing the RDB or AOF files which would normally
            prevent a shutdown.
      
          - ABORT cancels ongoing shutdown. Can't be combined with other flags.
      
      * New field in the output of the INFO command: 'shutdown_in_milliseconds'. The
        value is the remaining maximum time to wait for lagging replicas before
        finishing the shutdown. This field is present in the Server section **only**
        during shutdown.
      
      Not directly related:
      
      * When shutting down, if there is an AOF saving child, it is killed **even** if AOF
        is disabled. This can happen if BGREWRITEAOF is used when AOF is off.
      
      * Client pause now has end time and type (WRITE or ALL) per purpose. The
        different pause purposes are *CLIENT PAUSE command*, *failover* and
        *shutdown*. If clients are unpaused for one purpose, it doesn't affect client
        pause for other purposes. For example, the CLIENT UNPAUSE command doesn't
        affect client pause initiated by the failover or shutdown procedures. A completed
        failover or a failed shutdown doesn't unpause clients paused by the CLIENT
        PAUSE command.
      
      Notes:
      
      * DEBUG RESTART doesn't wait for replicas.
      
      * We already have a warning logged when a replica disconnects. This means that
        if any replica connection is lost during the shutdown, it is either logged as
        disconnected or as lagging at the time of exit.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      45a155bd
    • yoav-steinberg's avatar
      Generate RDB with Functions only via redis-cli --functions-rdb (#9968) · 1bf6d6f1
      yoav-steinberg authored
      
      
      This is needed in order to ease the deployment of functions for ephemeral cases, where user
      needs to spin up a server with functions pre-loaded.
      
      #### Details:
      
      * Added `--functions-rdb` option to _redis-cli_.
      * Functions only rdb via `REPLCONF rdb-filter-only functions`. This is a placeholder for a space
        separated inclusion filter for the RDB. In the future can be `REPLCONF rdb-filter-only
        "functions db:3 key-patten:user*"` and a complementing `rdb-filter-exclude` `REPLCONF`
        can also be added.
      * Handle "slave requirements" specification to RDB saving code so we can use the same RDB
        when different slaves express the same requirements (like functions-only) and not share the
        RDB when their requirements differ. This is currently just a flags `int`, but can be extended to
        a more complex structure with various filter fields.
      * make sure to support filters only in diskless replication mode (not to override the persistence file),
        we do that by forcing diskless (even if disabled by config)
      
      other changes:
      * some refactoring in rdb.c (extract portion of a big function to a sub-function)
      * rdb_key_save_delay used in AOFRW too
      * sendChildInfo takes the number of updated keys (incremental, rather than absolute)
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      1bf6d6f1
  8. 28 Dec, 2021 2 commits
  9. 27 Dec, 2021 1 commit
    • Itamar Haber's avatar
      Adds utils/gen-commands-json.py (#9958) · f810510b
      Itamar Haber authored
      Following #9656, this script generates a "commands.json" file from the output
      of the new COMMAND. The output of this script is used in redis/redis-doc#1714
      and by redis/redis-io#259. This also converts a couple of rogue dashes (in 
      'key-specs' and 'multiple-token' flags) to underscores (continues #9959).
      f810510b
  10. 22 Dec, 2021 2 commits
    • guybe7's avatar
      Sort out mess around propagation and MULTI/EXEC (#9890) · 7ac21307
      guybe7 authored
      The mess:
      Some parts use alsoPropagate for late propagation, others using an immediate one (propagate()),
      causing edge cases, ugly/hacky code, and the tendency for bugs
      
      The basic idea is that all commands are propagated via alsoPropagate (i.e. added to a list) and the
      top-most call() is responsible for going over that list and actually propagating them (and wrapping
      them in MULTI/EXEC if there's more than one command). This is done in the new function,
      propagatePendingCommands.
      
      Callers to propagatePendingCommands:
      1. top-most call() (we want all nested call()s to add to the also_propagate array and just the top-most
         one to propagate them) - via `afterCommand`
      2. handleClientsBlockedOnKeys: it is out of call() context and it may propagate stuff - via `afterCommand`. 
      3. handleClientsBlockedOnKeys edge case: if the looked-up key is already expired, we will propagate the
         expire but will not unblock any client so `afterCommand` isn't called. in that case, we have to propagate
         the deletion explicitly.
      4. cron stuff: active-expire and eviction may also propagate stuff
      5. modules: the module API allows to propagate stuff from just about anywhere (timers, keyspace notifications,
         threads). I could have tried to catch all the out-of-call-context places but it seemed easier to handle it in one
         place: when we free the context. in the spirit of what was done in call(), only the top-most freeing of a module
         context may cause propagation.
      6. modules: when using a thread-safe ctx it's not clear when/if the ctx will be freed. we do know that the module
         must lock the GIL before calling RM_Replicate/RM_Call so we propagate the pending commands when
         releasing the GIL.
      
      A "known limitation", which were actually a bug, was fixed because of this commit (see propagate.tcl):
         When using a mix of RM_Call with `!` and RM_Replicate, the command would propagate out-of-order:
         first all the commands from RM_Call, and then the ones from RM_Replicate
      
      Another thing worth mentioning is that if, in the past, a client would issue a MULTI/EXEC with just one
      write command the server would blindly propagate the MULTI/EXEC too, even though it's redundant.
      not anymore.
      
      This commit renames propagate() to propagateNow() in order to cause conflicts in pending PRs.
      propagatePendingCommands is the only caller of propagateNow, which is now a static, internal helper function.
      
      Optimizations:
      1. alsoPropagate will not add stuff to also_propagate if there's no AOF and replicas
      2. alsoPropagate reallocs also_propagagte exponentially, to save calls to memmove
      
      Bugfixes:
      1. CONFIG SET can create evictions, sending notifications which can cause to dirty++ with modules.
         we need to prevent it from propagating to AOF/replicas
      2. We need to set current_client in RM_Call. buggy scenario:
         - CONFIG SET maxmemory, eviction notifications, module hook calls RM_Call
         - assertion in lookupKey crashes, because current_client has CONFIG SET, which isn't CMD_WRITE
      3. minor: in eviction, call propagateDeletion after notification, like active-expire and all commands
         (we always send a notification before propagating the command)
      7ac21307
    • Oran Agra's avatar
      Allow most CONFIG SET during loading, block some commands in async-loading (#9878) · 41e6e05d
      Oran Agra authored
      ## background
      Till now CONFIG SET was blocked during loading.
      (In the not so distant past, GET was disallowed too)
      
      We recently (not released yet) added an async-loading mode, see #9323,
      and during that time it'll serve CONFIG SET and any other command.
      And now we realized (#9770) that some configs, and commands are dangerous
      during async-loading.
      
      ## changes
      * Allow most CONFIG SET during loading (both on async-loading and normal loading)
      * Allow CONFIG REWRITE and CONFIG RESETSTAT during loading
      * Block a few config during loading (`appendonly`, `repl-diskless-load`, and `dir`)
      * Block a few commands during loading (list below)
      
      ## the blocked commands:
      * SAVE - obviously we don't wanna start a foregreound save during loading 8-)
      * BGSAVE - we don't mind to schedule one, but we don't wanna fork now
      * BGREWRITEAOF - we don't mind to schedule one, but we don't wanna fork now
      * MODULE - we obviously don't wanna unload a module during replication / rdb loading
        (MODULE HELP and MODULE LIST are not blocked)
      * SYNC / PSYNC - we're in the middle of RDB loading from master, must not allow sync
        requests now.
      * REPLICAOF / SLAVEOF - we're in the middle of replicating, maybe it makes sense to let
        the user abort it, but he couldn't do that so far, i don't wanna take any risk of bugs due to odd state.
      * CLUSTER - only allow [HELP, SLOTS, NODES, INFO, MYID, LINKS, KEYSLOT, COUNTKEYSINSLOT,
        GETKEYSINSLOT, RESET, REPLICAS, COUNT_FAILURE_REPORTS], for others, preserve the status quo
      
      ## other fixes
      * processEventsWhileBlocked had an issue when being nested, this could happen with a busy script
        during async loading (new), but also in a busy script during AOF loading (old). this lead to a crash in
        the scenario described in #6988
      41e6e05d
  11. 21 Dec, 2021 1 commit
    • zhugezy's avatar
      Remove EVAL script verbatim replication, propagation, and deterministic execution logic (#9812) · 1b0968df
      zhugezy authored
      
      
      # Background
      
      The main goal of this PR is to remove relevant logics on Lua script verbatim replication,
      only keeping effects replication logic, which has been set as default since Redis 5.0.
      As a result, Lua in Redis 7.0 would be acting the same as Redis 6.0 with default
      configuration from users' point of view.
      
      There are lots of reasons to remove verbatim replication.
      Antirez has listed some of the benefits in Issue #5292:
      
      >1. No longer need to explain to users side effects into scripts.
          They can do whatever they want.
      >2. No need for a cache about scripts that we sent or not to the slaves.
      >3. No need to sort the output of certain commands inside scripts
          (SMEMBERS and others): this both simplifies and gains speed.
      >4. No need to store scripts inside the RDB file in order to startup correctly.
      >5. No problems about evicting keys during the script execution.
      
      When looking back at Redis 5.0, antirez and core team decided to set the config
      `lua-replicate-commands yes` by default instead of removing verbatim replication
      directly, in case some bad situations happened. 3 years later now before Redis 7.0,
      it's time to remove it formally.
      
      # Changes
      
      - configuration for lua-replicate-commands removed
        - created config file stub for backward compatibility
      - Replication script cache removed
        - this is useless under script effects replication
        - relevant statistics also removed
      - script persistence in RDB files is also removed
      - Propagation of SCRIPT LOAD and SCRIPT FLUSH to replica / AOF removed
      - Deterministic execution logic in scripts removed (i.e. don't run write commands
        after random ones, and sorting output of commands with random order)
        - the flags indicating which commands have non-deterministic results are kept as hints to clients.
      - `redis.replicate_commands()` & `redis.set_repl()` changed
        - now `redis.replicate_commands()` does nothing and return an 1
        - ...and then `redis.set_repl()` can be issued before `redis.replicate_commands()` now
      - Relevant TCL cases adjusted
      - DEBUG lua-always-replicate-commands removed
      
      # Other changes
      - Fix a recent bug comparing CLIENT_ID_AOF to original_client->flags instead of id. (introduced in #9780)
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      1b0968df
  12. 20 Dec, 2021 1 commit
    • Binbin's avatar
      Fix recent daily CI test failures (#9966) · febc3f63
      Binbin authored
      Recent PRs have introduced some failures, this commit
      try to fix these CI failures. Here are the changes:
      
      1. Enable debug-command in sentinel test.
      ```
      Master reboot in very short time: ERR DEBUG command not allowed. If the
      enable-debug-command option is set to "local", you can run it from a
      local connection, otherwise you need to set this option in the
      configuration file, and then restart the server.
      ```
      
      2. Enable protected-config in sentinel test.
      ```
      SDOWN is triggered by misconfigured instance replying with errors: ERR
      CONFIG SET failed (possibly related to argument 'dir') - can't set
      protected config
      ```
      
      3. Enable debug-command in cluster test.
      ```
      Verify slaves consistency: ERR DEBUG command not allowed. If the
      enable-debug-command option is set to "local", you can run it from a
      local connection, otherwise you need to set this option in the
      configuration file, and then restart the server.
      ```
      
      4. quicklist fill should be signed int.
      The reason for the modification is to eliminate the warning.
      Modify `int fill: QL_FILL_BITS` to `signed int fill: QL_FILL_BITS`
      
      The first three were introduced at #9920 (same issue).
      And the last one was introduced at #9962.
      febc3f63
  13. 19 Dec, 2021 1 commit
    • YaacovHazan's avatar
      Protected configs and sensitive commands (#9920) · ae2f5b7b
      YaacovHazan authored
      Block sensitive configs and commands by default.
      
      * `enable-protected-configs` - block modification of configs with the new `PROTECTED_CONFIG` flag.
         Currently we add this flag to `dbfilename`, and `dir` configs,
         all of which are non-mutable configs that can set a file redis will write to.
      * `enable-debug-command` - block the `DEBUG` command
      * `enable-module-command` - block the `MODULE` command
      
      These have a default value set to `no`, so that these features are not
      exposed by default to client connections, and can only be set by modifying the config file.
      
      Users can change each of these to either `yes` (allow all access), or `local` (allow access from
      local TCP connections and unix domain connections)
      
      Note that this is a **breaking change** (specifically the part about MODULE command being disabled by default).
      I.e. we don't consider DEBUG command being blocked as an issue (people shouldn't have been using it),
      and the few configs we protected are unlikely to have been set at runtime anyway.
      On the other hand, it's likely to assume some users who use modules, load them from the config file anyway.
      Note that's the whole point of this PR, for redis to be more secure by default and reduce the attack surface on
      innocent users, so secure defaults will necessarily mean a breaking change.
      ae2f5b7b
  14. 18 Dec, 2021 1 commit
  15. 17 Dec, 2021 1 commit
    • ny0312's avatar
      Introduce memory management on cluster link buffers (#9774) · 792afb44
      ny0312 authored
      Introduce memory management on cluster link buffers:
       * Introduce a new `cluster-link-sendbuf-limit` config that caps memory usage of cluster bus link send buffers.
       * Introduce a new `CLUSTER LINKS` command that displays current TCP links to/from peers.
       * Introduce a new `mem_cluster_links` field under `INFO` command output, which displays the overall memory usage by all current cluster links.
       * Introduce a new `total_cluster_links_buffer_limit_exceeded` field under `CLUSTER INFO` command output, which displays the accumulated count of cluster links freed due to `cluster-link-sendbuf-limit`.
      792afb44
  16. 16 Dec, 2021 1 commit
  17. 15 Dec, 2021 2 commits
    • guybe7's avatar
      Auto-generate the command table from JSON files (#9656) · 86781600
      guybe7 authored
      Delete the hardcoded command table and replace it with an auto-generated table, based
      on a JSON file that describes the commands (each command must have a JSON file).
      
      These JSON files are the SSOT of everything there is to know about Redis commands,
      and it is reflected fully in COMMAND INFO.
      
      These JSON files are used to generate commands.c (using a python script), which is then
      committed to the repo and compiled.
      
      The purpose is:
      * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
      * drop the dependency between Redis-user and the commands.json in redis-doc.
      * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
        done in a separate PR)
      * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
        artifacts should be a large JSON, containing all the information about all of the commands, which will be
        generated from COMMAND's reply)
      * the byproduct of this is:
        * module commands will be able to provide that info and possibly be more of a first-class citizens
        * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
      
      ### Interface changes
      
      #### COMMAND INFO's reply change (and arg-less COMMAND)
      
      Before this commit the reply at index 7 contained the key-specs list
      and reply at index 8 contained the sub-commands list (Both unreleased).
      Now, reply at index 7 is a map of:
      - summary - short command description
      - since - debut version
      - group - command group
      - complexity - complexity string
      - doc-flags - flags used for documentation (e.g. "deprecated")
      - deprecated-since - if deprecated, from which version?
      - replaced-by - if deprecated, which command replaced it?
      - history - a list of (version, what-changed) tuples
      - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
      - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
      - key-specs - an array of keys specs (already in unstable, just changed location)
      - subcommands - a list of sub-commands (already in unstable, just changed location)
      - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
      
      more details on these can be found in https://github.com/redis/redis-doc/pull/1697
      
      only the first three fields are mandatory 
      
      #### API changes (unreleased API obviously)
      
      now they take RedisModuleCommand opaque pointer instead of looking up the command by name
      
      - RM_CreateSubcommand
      - RM_AddCommandKeySpec
      - RM_SetCommandKeySpecBeginSearchIndex
      - RM_SetCommandKeySpecBeginSearchKeyword
      - RM_SetCommandKeySpecFindKeysRange
      - RM_SetCommandKeySpecFindKeysKeynum
      
      Currently, we did not add module API to provide additional information about their commands because
      we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944
      
      .
      
      ### Somehow related changes
      1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
         will be documented with M|KM|FT|MI and can take both lowercase and uppercase
      
      ### Unrelated changes
      1. Bugfix: no_madaory_keys was absent in COMMAND's reply
      2. expose CMD_MODULE as "module" via COMMAND
      3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
      Co-authored-by: default avatarItamar Haber <itamar@garantiadata.com>
      86781600
    • 丽媛自己动's avatar
  18. 08 Dec, 2021 1 commit
    • Binbin's avatar
      Fix SENTINEL subcommands's arity (#9909) · a7726cdf
      Binbin authored
      For `SENTINEL SET`, we can use in these ways:
      1. SENTINEL SET mymaster quorum 3
      2. SENTINEL SET mymaster quorum 5 parallel-syncs 1
      
      For `SENTINEL SIMULATE-FAILURE`, although it is only used for testing:
      1. SENTINEL SIMULATE-FAILURE CRASH-AFTER-ELECTION
      2. SENTINEL SIMULATE-FAILURE CRASH-AFTER-ELECTION CRASH-AFTER-PROMOTION
      a7726cdf
  19. 07 Dec, 2021 1 commit
    • yoav-steinberg's avatar
      Don't write oom score adj to proc unless we're managing it. (#9904) · 1736fa4d
      yoav-steinberg authored
      When disabling redis oom-score-adj managment we restore the
      base value read before enabling oom-score-adj management.
      
      This fixes an issue introduced in #9748 where updating
      `oom-score-adj-values` while `oom-score-adj` was set to `no`
      would write the base oom score adj value read on startup to `/proc`.
      This is a bug since while `oom-score-adj` is disabled we should
      never write to proc and let external processes manage it.
      
      Added appropriate tests.
      1736fa4d
  20. 02 Dec, 2021 1 commit
    • meir@redislabs.com's avatar
      Redis Functions - Added redis function unit and Lua engine · cbd46317
      meir@redislabs.com authored
      Redis function unit is located inside functions.c
      and contains Redis Function implementation:
      1. FUNCTION commands:
        * FUNCTION CREATE
        * FCALL
        * FCALL_RO
        * FUNCTION DELETE
        * FUNCTION KILL
        * FUNCTION INFO
      2. Register engine
      
      In addition, this commit introduce the first engine
      that uses the Redis Function capabilities, the
      Lua engine.
      cbd46317
  21. 01 Dec, 2021 3 commits
    • meir@redislabs.com's avatar
      Redis Functions - Introduce script unit. · fc731bc6
      meir@redislabs.com authored
      Script unit is a new unit located on script.c.
      Its purpose is to provides an API for functions (and eval)
      to interact with Redis. Interaction includes mostly
      executing commands, but also functionalities like calling
      Redis back on long scripts or check if the script was killed.
      
      The interaction is done using a scriptRunCtx object that
      need to be created by the user and initialized using scriptPrepareForRun.
      
      Detailed list of functionalities expose by the unit:
      1. Calling commands (including all the validation checks such as
         acl, cluster, read only run, ...)
      2. Set Resp
      3. Set Replication method (AOF/REPLICATION/NONE)
      4. Call Redis back to on long running scripts to allow Redis reply
         to clients and perform script kill
      
      The commit introduce the new unit and uses it on eval commands to
      interact with Redis.
      fc731bc6
    • meir@redislabs.com's avatar
      Redis Functions - Move Lua related variable into luaCtx struct · e0cd580a
      meir@redislabs.com authored
      The following variable was renamed:
      1. lua_caller 			-> script_caller
      2. lua_time_limit 		-> script_time_limit
      3. lua_timedout 		-> script_timedout
      4. lua_oom 			-> script_oom
      5. lua_disable_deny_script 	-> script_disable_deny_script
      6. in_eval			-> in_script
      
      The following variables was moved to lctx under eval.c
      1.  lua
      2.  lua_client
      3.  lua_cur_script
      4.  lua_scripts
      5.  lua_scripts_mem
      6.  lua_replicate_commands
      7.  lua_write_dirty
      8.  lua_random_dirty
      9.  lua_multi_emitted
      10. lua_repl
      11. lua_kill
      12. lua_time_start
      13. lua_time_snapshot
      
      This commit is in a low risk of introducing any issues and it
      is just moving varibales around and not changing any logic.
      e0cd580a
    • yoav-steinberg's avatar
      Multiparam config set (#9748) · 0e5b813e
      yoav-steinberg authored
      We can now do: `config set maxmemory 10m repl-backlog-size 5m`
      
      ## Basic algorithm to support "transaction like" config sets:
      
      1. Backup all relevant current values (via get).
      2. Run "verify" and "set" on everything, if we fail run "restore".
      3. Run "apply" on everything (optional optimization: skip functions already run). If we fail run "restore".
      4. Return success.
      
      ### restore
      1. Run set on everything in backup. If we fail log it and continue (this puts us in an undefined
         state but we decided it's better than the alternative of panicking). This indicates either a bug
         or some unsupported external state.
      2. Run apply on everything in backup (optimization: skip functions already run). If we fail log
         it (see comment above).
      3. Return error.
      
      ## Implementation/design changes:
      * Apply function are idempotent (have no effect if they are run more than once for the same config).
      * No indication in set functions if we're reading the config or running from the `CONFIG SET` command
         (removed `update` argument).
      * Set function should set some config variable and assume an (optional) apply function will use that
         later to apply. If we know this setting can be safely applied immediately and can always be reverted
         and doesn't depend on any other configuration we can apply immediately from within the set function
         (and not store the setting anywhere). This is the case of this `dir` config, for example, which has no
         apply function. No apply function is need also in the case that setting the variable in the `server` struct
         is all that needs to be done to make the configuration take effect. Note that the original concept of `update_fn`,
         which received the old and new values was removed and replaced by the optional apply function.
      * Apply functions use settings written to the `server` struct and don't receive any inputs.
      * I take care that for the generic (non-special) configs if there's no change I avoid calling the setter (possible
         optimization: avoid calling the apply function as well).
      * Passing the same config parameter more than once to `config set` will fail. You can't do `config set my-setting
         value1 my-setting value2`.
      
      Note that getting `save` in the context of the conf file parsing to work here as before was a pain.
      The conf file supports an aggregate `save` definition, where each `save` line is added to the server's
      save params. This is unlike any other line in the config file where each line overwrites any previous
      configuration. Since we now support passing multiple save params in a single line (see top comments
      about `save` in https://github.com/redis/redis/pull/9644) we should deprecate the aggregate nature of
      this config line and perhaps reduce this ugly code in the future.
      0e5b813e
  22. 28 Nov, 2021 1 commit
    • sundb's avatar
      Fix COMMAND GETKEYS on LCS (#9852) · 4d870078
      sundb authored
      Remove lcsGetKeys to clean up the remaining STRALGO after #9733.
      i.e. it still used a getkeys_proc which was still looking for the KEYS or STRINGS arguments
      4d870078
  23. 24 Nov, 2021 1 commit
    • sundb's avatar
      Replace ziplist with listpack in quicklist (#9740) · 45129059
      sundb authored
      
      
      Part three of implementing #8702, following #8887 and #9366 .
      
      ## Description of the feature
      1. Replace the ziplist container of quicklist with listpack.
      2. Convert existing quicklist ziplists on RDB loading time. an O(n) operation.
      
      ## Interface changes
      1. New `list-max-listpack-size` config is an alias for `list-max-ziplist-size`.
      2. Replace `debug ziplist` command with `debug listpack`.
      
      ## Internal changes
      1. Add `lpMerge` to merge two listpacks . (same as `ziplistMerge`)
      2. Add `lpRepr` to print info of listpack which is used in debugCommand and `quicklistRepr`. (same as `ziplistRepr`)
      3. Replace `QUICKLIST_NODE_CONTAINER_ZIPLIST` with `QUICKLIST_NODE_CONTAINER_PACKED`(following #9357 ).
          It represent that a quicklistNode is a packed node, as opposed to a plain node.
      4. Remove `createZiplistObject` method, which is never used.
      5. Calculate listpack entry size using overhead overestimation in `quicklistAllowInsert`.
          We prefer an overestimation, which would at worse lead to a few bytes below the lowest limit of 4k.
      
      ## Improvements
      1. Calling `lpShrinkToFit` after converting Ziplist to listpack, which was missed at #9366.
      2. Optimize `quicklistAppendPlainNode` to avoid memcpy data.
      
      ## Bugfix
      1. Fix crash in `quicklistRepr` when ziplist is compressed, introduced from #9366.
      
      ## Test
      1. Add unittest for `lpMerge`.
      2. Modify the old quicklist ziplist corrupt dump test.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      45129059
  24. 23 Nov, 2021 1 commit
    • guybe7's avatar
      QUIT is a command, HOST: and POST are not (#9798) · b161cff5
      guybe7 authored
      Some people complain that QUIT is missing from help/command table.
      Not appearing in COMMAND command, command stats, ACL, etc.
      and instead, there's a hack in processCommand with a comment that looks outdated.
      Note that it is [documented](https://redis.io/commands/quit)
      
      At the same time, HOST: and POST are there in the command table although these are not real commands.
      They would appear in the COMMAND command, and even in commandstats.
      
      Other changes:
      1. Initialize the static logged_time static var in securityWarningCommand
      2. add `no-auth` flag to RESET so it can always be executed.
      b161cff5
  25. 18 Nov, 2021 2 commits
    • Eduardo Semprebon's avatar
      Reject PING with MASTERDOWN when replica-serve-stale-data=no (#9757) · 1a255e31
      Eduardo Semprebon authored
      Currently PING returns different status when server is not serving data,
      for example when `LOADING` or `BUSY`.
      But same was not true for `MASTERDOWN`
      This commit makes PING reply with `MASTERDOWN` when
      replica-serve-stale-data=no and link is MASTER is down.
      1a255e31
    • guybe7's avatar
      Obliterate STRALGO! add LCS (which only works on keys) (#9799) · af748988
      guybe7 authored
      Drop the STRALGO command, now LCS is a command of its own and it only works on keys (not input strings).
      The motivation is that STRALGO's syntax was really messed-up...
      - assumes all (future) string algorithms will take similar arguments
      - mixes command that takes keys and one that doesn't in the same command.
      - make it nearly impossible to expose the right key spec in COMMAND INFO (issues cluster clients)
      - hard for cluster clients to determine the key names (firstkey, lastkey, etc)
      - hard for ACL / flags (is it a read command?)
      
      This is a breaking change.
      af748988
  26. 16 Nov, 2021 2 commits