1. 13 Jan, 2022 1 commit
    • chenyang8094's avatar
      Always create base AOF file when redis start from empty. (#10102) · e9bff797
      chenyang8094 authored
      
      
      Force create a BASE file (use a foreground `rewriteAppendOnlyFile`) when redis starts from an
      empty data set and  `appendonly` is  yes.
      
      The reasoning is that normally, after redis is running for some time, and the AOF has gone though
      a few rewrites, there's always a base rdb file. and the scenario where the base file is missing, is
      kinda rare (happens only at empty startup), so this change normalizes it.
      But more importantly, there are or could be some complex modules that are started with some
      configuration, when they create persistence they write that configuration to RDB AUX fields, so
      that can can always know with which configuration the persistence file they're loading was
      created (could be critical). there is (was) one scenario in which they could load their persisted data,
      and that configuration was missing, and this change fixes it.
      
      Add a new module event: REDISMODULE_SUBEVENT_PERSISTENCE_SYNC_AOF_START, similar to
      REDISMODULE_SUBEVENT_PERSISTENCE_AOF_START which is async.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      e9bff797
  2. 11 Jan, 2022 1 commit
  3. 30 Dec, 2021 1 commit
  4. 15 Dec, 2021 1 commit
    • guybe7's avatar
      Auto-generate the command table from JSON files (#9656) · 86781600
      guybe7 authored
      Delete the hardcoded command table and replace it with an auto-generated table, based
      on a JSON file that describes the commands (each command must have a JSON file).
      
      These JSON files are the SSOT of everything there is to know about Redis commands,
      and it is reflected fully in COMMAND INFO.
      
      These JSON files are used to generate commands.c (using a python script), which is then
      committed to the repo and compiled.
      
      The purpose is:
      * Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
      * drop the dependency between Redis-user and the commands.json in redis-doc.
      * delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
        done in a separate PR)
      * redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
        artifacts should be a large JSON, containing all the information about all of the commands, which will be
        generated from COMMAND's reply)
      * the byproduct of this is:
        * module commands will be able to provide that info and possibly be more of a first-class citizens
        * in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
      
      ### Interface changes
      
      #### COMMAND INFO's reply change (and arg-less COMMAND)
      
      Before this commit the reply at index 7 contained the key-specs list
      and reply at index 8 contained the sub-commands list (Both unreleased).
      Now, reply at index 7 is a map of:
      - summary - short command description
      - since - debut version
      - group - command group
      - complexity - complexity string
      - doc-flags - flags used for documentation (e.g. "deprecated")
      - deprecated-since - if deprecated, from which version?
      - replaced-by - if deprecated, which command replaced it?
      - history - a list of (version, what-changed) tuples
      - hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
      - arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
      - key-specs - an array of keys specs (already in unstable, just changed location)
      - subcommands - a list of sub-commands (already in unstable, just changed location)
      - reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
      
      more details on these can be found in https://github.com/redis/redis-doc/pull/1697
      
      only the first three fields are mandatory 
      
      #### API changes (unreleased API obviously)
      
      now they take RedisModuleCommand opaque pointer instead of looking up the command by name
      
      - RM_CreateSubcommand
      - RM_AddCommandKeySpec
      - RM_SetCommandKeySpecBeginSearchIndex
      - RM_SetCommandKeySpecBeginSearchKeyword
      - RM_SetCommandKeySpecFindKeysRange
      - RM_SetCommandKeySpecFindKeysKeynum
      
      Currently, we did not add module API to provide additional information about their commands because
      we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944
      
      .
      
      ### Somehow related changes
      1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
         will be documented with M|KM|FT|MI and can take both lowercase and uppercase
      
      ### Unrelated changes
      1. Bugfix: no_madaory_keys was absent in COMMAND's reply
      2. expose CMD_MODULE as "module" via COMMAND
      3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
      Co-authored-by: default avatarItamar Haber <itamar@garantiadata.com>
      86781600
  5. 04 Nov, 2021 1 commit
    • Eduardo Semprebon's avatar
      Replica keep serving data during repl-diskless-load=swapdb for better availability (#9323) · 91d0c758
      Eduardo Semprebon authored
      
      
      For diskless replication in swapdb mode, considering we already spend replica memory
      having a backup of current db to restore in case of failure, we can have the following benefits
      by instead swapping database only in case we succeeded in transferring db from master:
      
      - Avoid `LOADING` response during failed and successful synchronization for cases where the
        replica is already up and running with data.
      - Faster total time of diskless replication, because now we're moving from Transfer + Flush + Load
        time to Transfer + Load only. Flushing the tempDb is done asynchronously after swapping.
      - This could be implemented also for disk replication with similar benefits if consumers are willing
        to spend the extra memory usage.
      
      General notes:
      - The concept of `backupDb` becomes `tempDb` for clarity.
      - Async loading mode will only kick in if the replica is syncing from a master that has the same
        repl-id the one it had before. i.e. the data it's getting belongs to a different time of the same timeline. 
      - New property in INFO: `async_loading` to differentiate from the blocking loading
      - Slot to Key mapping is now a field of `redisDb` as it's more natural to access it from both server.db
        and the tempDb that is passed around.
      - Because this is affecting replicas only, we assume that if they are not readonly and write commands
        during replication, they are lost after SYNC same way as before, but we're still denying CONFIG SET
        here anyways to avoid complications.
      
      Considerations for review:
      - We have many cases where server.loading flag is used and even though I tried my best, there may
        be cases where async_loading should be checked as well and cases where it shouldn't (would require
        very good understanding of whole code)
      - Several places that had different behavior depending on the loading flag where actually meant to just
        handle commands coming from the AOF client differently than ones coming from real clients, changed
        to check CLIENT_ID_AOF instead.
      
      **Additional for Release Notes**
      - Bugfix - server.dirty was not incremented for any kind of diskless replication, as effect it wouldn't
        contribute on triggering next database SAVE
      - New flag for RM_GetContextFlags module API: REDISMODULE_CTX_FLAGS_ASYNC_LOADING
      - Deprecated RedisModuleEvent_ReplBackup. Starting from Redis 7.0, we don't fire this event.
        Instead, we have the new RedisModuleEvent_ReplAsyncLoad holding 3 sub-events: STARTED,
        ABORTED and COMPLETED.
      - New module flag REDISMODULE_OPTIONS_HANDLE_REPL_ASYNC_LOAD for RedisModule_SetModuleOptions
        to allow modules to declare they support the diskless replication with async loading (when absent, we fall
        back to disk-based loading).
      Co-authored-by: default avatarEduardo Semprebon <edus@saxobank.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      91d0c758
  6. 25 Oct, 2021 1 commit
  7. 20 Oct, 2021 1 commit
    • guybe7's avatar
      Treat subcommands as commands (#9504) · 43e736f7
      guybe7 authored
      ## Intro
      
      The purpose is to allow having different flags/ACL categories for
      subcommands (Example: CONFIG GET is ok-loading but CONFIG SET isn't)
      
      We create a small command table for every command that has subcommands
      and each subcommand has its own flags, etc. (same as a "regular" command)
      
      This commit also unites the Redis and the Sentinel command tables
      
      ## Affected commands
      
      CONFIG
      Used to have "admin ok-loading ok-stale no-script"
      Changes:
      1. Dropped "ok-loading" in all except GET (this doesn't change behavior since
      there were checks in the code doing that)
      
      XINFO
      Used to have "read-only random"
      Changes:
      1. Dropped "random" in all except CONSUMERS
      
      XGROUP
      Used to have "write use-memory"
      Changes:
      1. Dropped "use-memory" in all except CREATE and CREATECONSUMER
      
      COMMAND
      No changes.
      
      MEMORY
      Used to have "random read-only"
      Changes:
      1. Dropped "random" in PURGE and USAGE
      
      ACL
      Used to have "admin no-script ok-loading ok-stale"
      Changes:
      1. Dropped "admin" in WHOAMI, GENPASS, and CAT
      
      LATENCY
      No changes.
      
      MODULE
      No changes.
      
      SLOWLOG
      Used to have "admin random ok-loading ok-stale"
      Changes:
      1. Dropped "random" in RESET
      
      OBJECT
      Used to have "read-only random"
      Changes:
      1. Dropped "random" in ENCODING and REFCOUNT
      
      SCRIPT
      Used to have "may-replicate no-script"
      Changes:
      1. Dropped "may-replicate" in all except FLUSH and LOAD
      
      CLIENT
      Used to have "admin no-script random ok-loading ok-stale"
      Changes:
      1. Dropped "random" in all except INFO and LIST
      2. Dropped "admin" in ID, TRACKING, CACHING, GETREDIR, INFO, SETNAME, GETNAME, and REPLY
      
      STRALGO
      No changes.
      
      PUBSUB
      No changes.
      
      CLUSTER
      Changes:
      1. Dropped "admin in countkeysinslots, getkeysinslot, info, nodes, keyslot, myid, and slots
      
      SENTINEL
      No changes.
      
      (note that DEBUG also fits, but we decided not to convert it since it's for
      debugging and anyway undocumented)
      
      ## New sub-command
      This commit adds another element to the per-command output of COMMAND,
      describing the list of subcommands, if any (in the same structure as "regular" commands)
      Also, it adds a new subcommand:
      ```
      COMMAND LIST [FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>)]
      ```
      which returns a set of all commands (unless filters), but excluding subcommands.
      
      ## Module API
      A new module API, RM_CreateSubcommand, was added, in order to allow
      module writer to define subcommands
      
      ## ACL changes:
      1. Now, that each subcommand is actually a command, each has its own ACL id.
      2. The old mechanism of allowed_subcommands is redundant
      (blocking/allowing a subcommand is the same as blocking/allowing a regular command),
      but we had to keep it, to support the widespread usage of allowed_subcommands
      to block commands with certain args, that aren't subcommands (e.g. "-select +select|0").
      3. I have renamed allowed_subcommands to allowed_firstargs to emphasize the difference.
      4. Because subcommands are commands in ACL too, you can now use "-" to block subcommands
      (e.g. "+client -client|kill"), which wasn't possible in the past.
      5. It is also possible to use the allowed_firstargs mechanism with subcommand.
      For example: `+config -config|set +config|set|loglevel` will block all CONFIG SET except
      for setting the log level.
      6. All of the ACL changes above required some amount of refactoring.
      
      ## Misc
      1. There are two approaches: Either each subcommand has its own function or all
         subcommands use the same function, determining what to do according to argv[0].
         For now, I took the former approaches only with CONFIG and COMMAND,
         while other commands use the latter approach (for smaller blamelog diff).
      2. Deleted memoryGetKeys: It is no longer needed because MEMORY USAGE now uses the "range" key spec.
      4. Bugfix: GETNAME was missing from CLIENT's help message.
      5. Sentinel and Redis now use the same table, with the same function pointer.
         Some commands have a different implementation in Sentinel, so we redirect
         them (these are ROLE, PUBLISH, and INFO).
      6. Command stats now show the stats per subcommand (e.g. instead of stats just
         for "config" you will have stats for "config|set", "config|get", etc.)
      7. It is now possible to use COMMAND directly on subcommands:
         COMMAND INFO CONFIG|GET (The pipeline syntax was inspired from ACL, and
         can be used in functions lookupCommandBySds and lookupCommandByCString)
      8. STRALGO is now a container command (has "help")
      
      ## Breaking changes:
      1. Command stats now show the stats per subcommand (see (5) above)
      43e736f7
  8. 18 Oct, 2021 1 commit
  9. 17 Oct, 2021 2 commits
  10. 14 Oct, 2021 1 commit
  11. 30 Sep, 2021 1 commit
  12. 27 Sep, 2021 1 commit
  13. 23 Sep, 2021 2 commits
    • Yossi Gottlieb's avatar
      Add RM_TrimStringAllocation(). (#9540) · bebc7f84
      Yossi Gottlieb authored
      This commit makes it possible to explicitly trim the allocation of a
      RedisModuleString.
      
      Currently, Redis automatically trims strings that have been retained by
      a module command when it returns. However, this is not thread safe and
      may result with corruption in threaded modules.
      
      Supporting explicit trimming offers a backwards compatible workaround to
      this problem.
      bebc7f84
    • YaacovHazan's avatar
      Adding ACL support for modules (#9309) · a56d4533
      YaacovHazan authored
      This commit introduced a new flag to the RM_Call:
      'C' - Check if the command can be executed according to the ACLs associated with it.
      
      Also, three new API's added to check if a command, key, or channel can be executed or accessed
      by a user, according to the ACLs associated with it.
      - RM_ACLCheckCommandPerm
      - RM_ACLCheckKeyPerm
      - RM_ACLCheckChannelPerm
      
      The user for these API's is a RedisModuleUser object, that for a Module user returned by the RM_CreateModuleUser API, or for a general ACL user can be retrieved by these two new API's:
      - RM_GetCurrentUserName - Retrieve the user name of the client connection behind the current context.
      - RM_GetModuleUserFromUserName - Get a RedisModuleUser from a user name
      
      As a result of getting a RedisModuleUser from name, it can now also access the general ACL users (not just ones created by the module).
      This mean the already existing API RM_SetModuleUserACL(), can be used to change the ACL rules for such users.
      a56d4533
  14. 15 Sep, 2021 1 commit
    • guybe7's avatar
      A better approach for COMMAND INFO for movablekeys commands (#8324) · 03fcc211
      guybe7 authored
      Fix #7297
      
      The problem:
      
      Today, there is no way for a client library or app to know the key name indexes for commands such as
      ZUNIONSTORE/EVAL and others with "numkeys", since COMMAND INFO returns no useful info for them.
      
      For cluster-aware redis clients, this requires to 'patch' the client library code specifically for each of these commands or to
      resolve each execution of these commands with COMMAND GETKEYS.
      
      The solution:
      
      Introducing key specs other than the legacy "range" (first,last,step)
      
      The 8th element of the command info array, if exists, holds an array of key specs. The array may be empty, which indicates
      the command doesn't take any key arguments or may contain one or more key-specs, each one may leads to the discovery
      of 0 or more key arguments.
      
      A client library that doesn't support this key-spec feature will keep using the first,last,step and movablekeys flag which will
      obviously remain unchanged.
      
      A client that supports this key-specs feature needs only to look at the key-specs array. If it finds an unrecognized spec, it
      must resort to using COMMAND GETKEYS if it wishes to get all key name arguments, but if all it needs is one key in order
      to know which cluster node to use, then maybe another spec (if the command has several) can supply that, and there's no
      need to use GETKEYS.
      
      Each spec is an array of arguments, first one is the spec name, the second is an array of flags, and the third is an array
      containing details about the spec (specific meaning for each spec type)
      The initial flags we support are "read" and "write" indicating if the keys that this key-spec finds are used for read or for write.
      clients should ignore any unfamiliar flags.
      
      In order to easily find the positions of keys in a given array of args we introduce keys specs. There are two logical steps of
      key specs:
      1. `start_search`: Given an array of args, indicate where we should start searching for keys
      2. `find_keys`: Given the output of start_search and an array of args, indicate all possible indices of keys.
      
      ### start_search step specs
      - `index`: specify an argument index explicitly
        - `index`: 0 based index (1 means the first command argument)
      - `keyword`: specify a string to match in `argv`. We should start searching for keys just after the keyword appears.
        - `keyword`: the string to search for
        - `start_search`: an index from which to start the keyword search (can be negative, which means to search from the end)
      
      Examples:
      - `SET` has start_search of type `index` with value `1`
      - `XREAD` has start_search of type `keyword` with value `[“STREAMS”,1]`
      - `MIGRATE` has start_search of type `keyword` with value `[“KEYS”,-2]`
      
      ### find_keys step specs
      - `range`: specify `[count, step, limit]`.
        - `lastkey`: index of the last key. relative to the index returned from begin_search. -1 indicating till the last argument, -2 one before the last
        - `step`: how many args should we skip after finding a key, in order to find the next one
        - `limit`: if count is -1, we use limit to stop the search by a factor. 0 and 1 mean no limit. 2 means ½ of the remaining args, 3 means ⅓, and so on.
      - “keynum”: specify `[keynum_index, first_key_index, step]`.
        - `keynum_index`: is relative to the return of the `start_search` spec.
        - `first_key_index`: is relative to `keynum_index`.
        - `step`: how many args should we skip after finding a key, in order to find the next one
      
      Examples:
      - `SET` has `range` of `[0,1,0]`
      - `MSET` has `range` of `[-1,2,0]`
      - `XREAD` has `range` of `[-1,1,2]`
      - `ZUNION` has `start_search` of type `index` with value `1` and `find_keys` of type `keynum` with value `[0,1,1]`
      - `AI.DAGRUN` has `start_search` of type `keyword` with value `[“LOAD“,1]` and `find_keys` of type `keynum` with value
        `[0,1,1]` (see https://oss.redislabs.com/redisai/master/commands/#aidagrun)
      
      Note: this solution is not perfect as the module writers can come up with anything, but at least we will be able to find the key
      args of the vast majority of commands.
      If one of the above specs can’t describe the key positions, the module writer can always fall back to the `getkeys-api` option.
      
      Some keys cannot be found easily (`KEYS` in `MIGRATE`: Imagine the argument for `AUTH` is the string “KEYS” - we will
      start searching in the wrong index). 
      The guarantee is that the specs may be incomplete (`incomplete` will be specified in the spec to denote that) but we never
      report false information (assuming the command syntax is correct).
      For `MIGRATE` we start searching from the end - `startfrom=-1` - and if one of the keys is actually called "keys" we will
      report only a subset of all keys - hence the `incomplete` flag.
      Some `incomplete` specs can be completely empty (i.e. UNKNOWN begin_search) which should tell the client that
      COMMAND GETKEYS (or any other way to get the keys) must be used (Example: For `SORT` there is no way to describe
      the STORE keyword spec, as the word "store" can appear anywhere in the command).
      
      We will expose these key specs in the `COMMAND` command so that clients can learn, on startup, where the keys are for
      all commands instead of holding hardcoded tables or use `COMMAND GETKEYS` in runtime.
      
      Comments:
      1. Redis doesn't internally use the new specs, they are only used for COMMAND output.
      2. In order to support the current COMMAND INFO format (reply array indices 4, 5, 6) we created a synthetic range, called
         legacy_range, that, if possible, is built according to the new specs.
      3. Redis currently uses only getkeys_proc or the legacy_range to get the keys indices (in COMMAND GETKEYS for
         example).
      
      "incomplete" specs:
      the command we have issues with are MIGRATE, STRALGO, and SORT
      for MIGRATE, because the token KEYS, if exists, must be the last token, we can search in reverse. it one of the keys is
      actually the string "keys" will return just a subset of the keys (hence, it's "incomplete")
      for SORT and STRALGO we can use this heuristic (the keys can be anywhere in the command) and therefore we added a
      key spec that is both "incomplete" and of "unknown type"
      
      if a client encounters an "incomplete" spec it means that it must find a different way (either COMMAND GETKEYS or have
      its own parser) to retrieve the keys.
      please note that all commands, apart from the three mentioned above, have "complete" key specs
      03fcc211
  15. 14 Sep, 2021 1 commit
    • Viktor Söderqvist's avatar
      Modules: Add remaining list API functions (#8439) · ea36d4de
      Viktor Söderqvist authored
      List functions operating on elements by index:
      
      * RM_ListGet
      * RM_ListSet
      * RM_ListInsert
      * RM_ListDelete
      
      Iteration is done using a simple for loop over indices.
      The index based functions use an internal iterator as an optimization.
      This is explained in the docs:
      
      ```
       * Many of the list functions access elements by index. Since a list is in
       * essence a doubly-linked list, accessing elements by index is generally an
       * O(N) operation. However, if elements are accessed sequentially or with
       * indices close together, the functions are optimized to seek the index from
       * the previous index, rather than seeking from the ends of the list.
       *
       * This enables iteration to be done efficiently using a simple for loop:
       *
       *     long n = RM_ValueLength(key);
       *     for (long i = 0; i < n; i++) {
       *         RedisModuleString *elem = RedisModule_ListGet(key, i);
       *         // Do stuff...
       *     }
      ```
      ea36d4de
  16. 08 Sep, 2021 1 commit
  17. 04 Aug, 2021 1 commit
    • Meir Shpilraien (Spielrein)'s avatar
      Unified Lua and modules reply parsing and added RESP3 support to RM_Call (#9202) · 2237131e
      Meir Shpilraien (Spielrein) authored
      
      
      ## Current state
      1. Lua has its own parser that handles parsing `reds.call` replies and translates them
        to Lua objects that can be used by the user Lua code. The parser partially handles
        resp3 (missing big number, verbatim, attribute, ...)
      2. Modules have their own parser that handles parsing `RM_Call` replies and translates
        them to RedisModuleCallReply objects. The parser does not support resp3.
      
      In addition, in the future, we want to add Redis Function (#8693) that will probably
      support more languages. At some point maintaining so many parsers will stop
      scaling (bug fixes and protocol changes will need to be applied on all of them).
      We will probably end up with different parsers that support different parts of the
      resp protocol (like we already have today with Lua and modules)
      
      ## PR Changes
      This PR attempt to unified the reply parsing of Lua and modules (and in the future
      Redis Function) by introducing a new parser unit (`resp_parser.c`). The new parser
      handles parsing the reply and calls different callbacks to allow the users (another
      unit that uses the parser, i.e, Lua, modules, or Redis Function) to analyze the reply.
      
      ### Lua API Additions
      The code that handles reply parsing on `scripting.c` was removed. Instead, it uses
      the resp_parser to parse and create a Lua object out of the reply. As mentioned
      above the Lua parser did not handle parsing big numbers, verbatim, and attribute.
      The new parser can handle those and so Lua also gets it for free.
      Those are translated to Lua objects in the following way:
      1. Big Number - Lua table `{'big_number':'<str representation for big number>'}`
      2. Verbatim - Lua table `{'verbatim_string':{'format':'<verbatim format>', 'string':'<verbatim string value>'}}`
      3. Attribute - currently ignored and not expose to the Lua parser, another issue will be open to decide how to expose it.
      
      Tests were added to check resp3 reply parsing on Lua
      
      ### Modules API Additions
      The reply parsing code on `module.c` was also removed and the new resp_parser is used instead.
      In addition, the RedisModuleCallReply was also extracted to a separate unit located on `call_reply.c`
      (in the future, this unit will also be used by Redis Function). A nice side effect of unified parsing is
      that modules now also support resp3. Resp3 can be enabled by giving `3` as a parameter to the
      fmt argument of `RM_Call`. It is also possible to give `0`, which will indicate an auto mode. i.e, Redis
      will automatically chose the reply protocol base on the current client set on the RedisModuleCtx
      (this mode will mostly be used when the module want to pass the reply to the client as is).
      In addition, the following RedisModuleAPI were added to allow analyzing resp3 replies:
      
      * New RedisModuleCallReply types:
         * `REDISMODULE_REPLY_MAP`
         * `REDISMODULE_REPLY_SET`
         * `REDISMODULE_REPLY_BOOL`
         * `REDISMODULE_REPLY_DOUBLE`
         * `REDISMODULE_REPLY_BIG_NUMBER`
         * `REDISMODULE_REPLY_VERBATIM_STRING`
         * `REDISMODULE_REPLY_ATTRIBUTE`
      
      * New RedisModuleAPI:
         * `RedisModule_CallReplyDouble` - getting double value from resp3 double reply
         * `RedisModule_CallReplyBool` - getting boolean value from resp3 boolean reply
         * `RedisModule_CallReplyBigNumber` - getting big number value from resp3 big number reply
         * `RedisModule_CallReplyVerbatim` - getting format and value from resp3 verbatim reply
         * `RedisModule_CallReplySetElement` - getting element from resp3 set reply
         * `RedisModule_CallReplyMapElement` - getting key and value from resp3 map reply
         * `RedisModule_CallReplyAttribute` - getting a reply attribute
         * `RedisModule_CallReplyAttributeElement` - getting key and value from resp3 attribute reply
         
      * New context flags:
         * `REDISMODULE_CTX_FLAGS_RESP3` - indicate that the client is using resp3
      
      Tests were added to check the new RedisModuleAPI
      
      ### Modules API Changes
      * RM_ReplyWithCallReply might return REDISMODULE_ERR if the given CallReply is in resp3
        but the client expects resp2. This is not a breaking change because in order to get a resp3
        CallReply one needs to specifically specify `3` as a parameter to the fmt argument of
        `RM_Call` (as mentioned above).
      
      Tests were added to check this change
      
      ### More small Additions
      * Added `debug set-disable-deny-scripts` that allows to turn on and off the commands no-script
      flag protection. This is used by the Lua resp3 tests so it will be possible to run `debug protocol`
      and check the resp3 parsing code.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarYossi Gottlieb <yossigo@gmail.com>
      2237131e
  18. 03 Aug, 2021 1 commit
  19. 01 Aug, 2021 1 commit
  20. 16 Jun, 2021 1 commit
  21. 08 Jun, 2021 1 commit
  22. 19 Apr, 2021 1 commit
    • Hanna Fadida's avatar
      Modules: adding a module type for key space notification (#8759) · 53a4d6c3
      Hanna Fadida authored
      Adding a new type mask ​for key space notification, REDISMODULE_NOTIFY_MODULE, to enable unique notifications from commands on REDISMODULE_KEYTYPE_MODULE type keys (which is currently unsupported).
      
      Modules can subscribe to a module key keyspace notification by RM_SubscribeToKeyspaceEvents,
      and clients by notify-keyspace-events of redis.conf or via the CONFIG SET, with the characters 'd' or 'A' 
      (REDISMODULE_NOTIFY_MODULE type mask is part of the '**A**ll' notation for key space notifications).
      
      Refactor: move some pubsub test infra from pubsub.tcl to util.tcl to be re-used by other tests.
      53a4d6c3
  23. 01 Apr, 2021 1 commit
  24. 24 Mar, 2021 1 commit
  25. 04 Mar, 2021 1 commit
    • YaacovHazan's avatar
      Fix RedisModule_IsAOFClient Redis Module API (#8596) · ac918229
      YaacovHazan authored
      Since the API declared (as #define) in redismodule.h and uses
      the CLIENT_ID_AOF that declared in the server.h, when
      a module will want to make use of this API, it will get a compilation
      error (module doesn't include the server.h).
      
      The API was broken by d6eb3afd (failed attempt for a cleanup).
      Revert to the original version of RedisModule_IsAOFClient
      that uses UINT64_MAX instead of CLIENT_ID_AOF
      ac918229
  26. 28 Feb, 2021 1 commit
  27. 16 Feb, 2021 1 commit
    • uriyage's avatar
      Adds INFO fields to track fork child progress (#8414) · fd052d2a
      uriyage authored
      * Adding current_save_keys_total and current_save_keys_processed info fields.
        Present in replication, BGSAVE and AOFRW.
      * Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
      * Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
        and module forks.
      fd052d2a
  28. 15 Feb, 2021 1 commit
  29. 29 Jan, 2021 1 commit
    • filipe oliveira's avatar
      Enabled background and reply time tracking on blocked on keys/blocked on... · f0c5052a
      filipe oliveira authored
      Enabled background and reply time tracking on blocked on keys/blocked on background work clients (#7491)
      
      This commit enables tracking time of the background tasks and on replies,
      opening the door for properly tracking commands that rely on blocking / background
       work via the slowlog, latency history, and commandstats. 
      
      Some notes:
      - The time spent blocked waiting for key changes, or blocked on synchronous
        replication is not accounted for. 
      
      - **This commit does not affect latency tracking of commands that are non-blocking
        or do not have background work.** ( meaning that it all stays the same with exception to
        `BZPOPMIN`,`BZPOPMAX`,`BRPOP`,`BLPOP`, etc... and module's commands that rely
        on background threads ). 
      
      -  Specifically for latency history command we've added a new event class named
        `command-unblocking` that will enable latency monitoring on commands that spawn
        background threads to do the work.
      
      - For blocking commands we're now considering the total time of a comman...
      f0c5052a
  30. 28 Jan, 2021 2 commits
    • guybe7's avatar
      Modules: Add event for fork child birth and termination (#8289) · 01cbf17b
      guybe7 authored
      Useful to avoid doing background jobs that can cause excessive COW
      01cbf17b
    • Viktor Söderqvist's avatar
      Add modules API for streams (#8288) · 4355145a
      Viktor Söderqvist authored
      APIs added for these stream operations: add, delete, iterate and
      trim (by ID or maxlength). The functions are prefixed by RM_Stream.
      
      * RM_StreamAdd
      * RM_StreamDelete
      * RM_StreamIteratorStart
      * RM_StreamIteratorStop
      * RM_StreamIteratorNextID
      * RM_StreamIteratorNextField
      * RM_StreamIteratorDelete
      * RM_StreamTrimByLength
      * RM_StreamTrimByID
      
      The type RedisModuleStreamID is added and functions for converting
      from and to RedisModuleString.
      
      * RM_CreateStringFromStreamID
      * RM_StringToStreamID
      
      Whenever the stream functions return REDISMODULE_ERR, errno is set to
      provide additional error information.
      
      Refactoring: The zset iterator fields in the RedisModuleKey struct
      are wrapped in a union, to allow the same space to be used for type-
      specific info for streams and allow future use for other key types.
      4355145a
  31. 07 Jan, 2021 1 commit
    • YaacovHazan's avatar
      Report child copy-on-write info continuously · ea930a35
      YaacovHazan authored
      Add INFO field, rdb_active_cow_size, to report COW of a live fork child while
      it's active.
      - once in 1024 keys check the time, and if there's more than one second since
        the last report send a report to the parent via the pipe.
      - refactor the child_info_data struct, it's an implementation detail that
        shouldn't be in the server struct, and not used to communicate data between
        caller and callee
      - remove the magic value from that struct (not sure what it was good for), and
        instead add handling of short reads.
      - add another value to the structure, cow_type, to indicate if the report is
        for the new rdb_active_cow_size field, or it's the last report of a
        successful operation
      - add new Module API to report the active COW
      - add more asserts variants to test.tcl
      ea930a35
  32. 13 Dec, 2020 2 commits
    • Oran Agra's avatar
      Add module event for repl-diskless-load swapdb (#8153) · ab60dcf5
      Oran Agra authored
      When a replica uses the diskless-load swapdb approach, it backs up the old database,
      then attempts to load a new one, and in case of failure, it restores the backup.
      
      this means that modules with global out of keyspace data, must have an option to
      subscribe to events and backup/restore/discard their global data too.
      ab60dcf5
    • Yossi Gottlieb's avatar
      Modules: add defrag API support. (#8149) · 63c1303c
      Yossi Gottlieb authored
      Add a new set of defrag functions that take a defrag context and allow
      defragmenting memory blocks and RedisModuleStrings.
      
      Modules can register a defrag callback which will be invoked when the
      defrag process handles globals.
      
      Modules with custom data types can also register a datatype-specific
      defrag callback which is invoked for keys that require defragmentation.
      The callback and associated functions support both one-step and
      multi-step options, depending on the complexity of the key as exposed by
      the free_effort callback.
      63c1303c
  33. 09 Dec, 2020 1 commit
    • Yossi Gottlieb's avatar
      Add module data-type support for COPY. (#8112) · 4e064fba
      Yossi Gottlieb authored
      This adds a copy callback for module data types, in order to make
      modules compatible with the new COPY command.
      
      The callback is optional and COPY will fail for keys with data types
      that do not implement it.
      4e064fba
  34. 17 Nov, 2020 1 commit
    • Meir Shpilraien (Spielrein)'s avatar
      Unified MULTI, LUA, and RM_Call with respect to blocking commands (#8025) · d87a0d02
      Meir Shpilraien (Spielrein) authored
      
      
      Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
      the caller, who executes the command in this context, expects a reply.
      
      Today, LUA and MULTI have a special (and different) treatment to blocking commands:
      
      LUA   - Most commands are marked with no-script flag which are checked when executing
      and command from LUA, commands that are not marked (like XREAD) verify that their
      blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
      MULTI - Command that is going to block, first verify that the client is not inside
      multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
      return a result which is a match to the empty key with no timeout (for example blpop
      inside MULTI will act as lpop)
      For modules that perform RM_Call with blocking command, the returned results type is
      REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
      
      Disadvantages of the current state are:
      
      No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
      Module can not safely execute blocking command (and get reply or error).
      Though It is true that modules are not like LUA or MULTI and should be smarter not
      to execute blocking commands on RM_Call, sometimes you want to execute a command base
      on client input (for example if you create a module that provides a new scripting
      language like javascript or python).
      While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
      REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
      check if the command came from another module using RM_Call. So there is no way
      for a module to know not to block another module RM_Call execution.
      
      This commit adds a way to unify the treatment for blocking clients by introducing
      a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
      turned on to signify that the client should not be blocked. A blocking command
      verifies that the flag is turned off before blocking. If a blocking command sees
      that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
      which are matches to empty key with no timeout (as MULTI does today).
      
      The new flag is checked on the following commands:
      
      List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
      Zset blocking commands: BZPOPMIN, BZPOPMAX
      Stream blocking commands: XREAD, XREADGROUP
      SUBSCRIBE, PSUBSCRIBE, MONITOR
      In addition, the new flag is turned on inside the AOF client, we do not want to
      block the AOF client to prevent deadlocks and commands ordering issues (and there
      is also an existing assert in the code that verifies it).
      
      To keep backward compatibility on LUA, all the no-script flags on existing commands
      were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
      
      To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
      We added a special treatment on those commands to allow executing them on MULTI.
      
      The only backward compatibility issue that this PR introduces is that now MONITOR
      is not allowed inside MULTI.
      
      Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
      or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarItamar Haber <itamar@redislabs.com>
      d87a0d02
  35. 16 Nov, 2020 1 commit
    • chenyangyang's avatar
      Modules callbacks for lazy free effort, and unlink (#7912) · c1aaad06
      chenyangyang authored
      Add two optional callbacks to the RedisModuleTypeMethods structure, which is `free_effort`
      and `unlink`. the `free_effort` callback indicates the effort required to free a module memory.
      Currently, if the effort exceeds LAZYFREE_THRESHOLD, the module memory may be released
      asynchronously. the `unlink` callback indicates the key has been removed from the DB by redis, and
      may soon be freed by a background thread.
      
      Add `lazyfreed_objects` info field, which represents the number of objects that have been
      lazyfreed since redis was started.
      
      Add `RM_GetTypeMethodVersion` API, which return the current redis-server runtime value of
      `REDISMODULE_TYPE_METHOD_VERSION`. You can use that when calling `RM_CreateDataType` to know
      which fields of RedisModuleTypeMethods are gonna be supported and which will be ignored.
      c1aaad06
  36. 09 Nov, 2020 1 commit