- 26 Mar, 2018 1 commit
-
-
TerryE authored
-
- 04 Jan, 2018 1 commit
-
-
Johny Mattsson authored
* Only load a single non-empty line from the uart at a time. * Don't fall behind in processing of uart buffer.
-
- 24 Dec, 2016 1 commit
-
-
Philip Gladstone authored
* Check the return code of the read function when doing crypto.fhash so that we don't pass negative lengths to the hashing functions * Fix various assert failures in the LVM arising from rotables. No functional change * Add the gpio interrupt time to the callback (and pass it from the interrupt handler) * Get the PC right in the perf module * Make the headers static in the websocket module * Fix the documentation
-
- 07 Dec, 2016 1 commit
-
-
Marcel Stör authored
This reverts commit 04ce0adf.
-
- 01 Dec, 2016 1 commit
-
-
Marcel Stör authored
* add u8g.fb_rle display * move comm drivers to u8g_glue.c * disable fb_rle per default * implement file.size for spiffs (#1516) Another bug squashed! * Fix start-up race between UART & start_lua. (#1522) Input during startup (especially while doing initial filesystem format) ran the risk of filling up the task queue, preventing the start_lua task from being queued, and hence NodeMCU would not start up that time. * Reimplemented esp_init_data_default. To work around the pesky "rf_cal[0] !=0x05" hang when booting on a chip which doesn't have esp_init_data written to it. It is no longer possible to do the writing of the esp_init_data_default from within nodemcu_init(), as the SDK now hangs long before it gets there. As such, I've had to reimplement this in our user_start_trampoline and get it all done before the SDK has a chance to look for the init data. It's unfortunate that we have to spend IRAM on this, but I see no better alternative at this point. * Replace hardcoded init data with generated data from SDK The esp_init_data_default.bin is now extracted from the SDK (and its patch file, if present), and the contents are automatically embedded into user_main.o. * Rework flashing instructions Clarifies issues around SDK init data and hopefully clears up some confusion, when paired with the esp_init_data_default changes in NodeMCU. * Fix typo * Fixes the gpio.serout problem from #1534 (#1535) * Fix some issues in gpio.serout * Minor cleanup * fix dereferencing NULL pointer in vfs_errno() (#1539) * add map ids for flash sizes 32m-c2, 64m, 128m in user_rf_cal_sector_set() (#1529) * Somfy/TELIS driver (#1521) * Reduced LUAL_BUFFERSIZE to 256. Should free up some stack (#1530) * avoid task queue overrun for serial input (#1540) Thank you. * Increase irom0_0_seg size for PR build * Improve reliability of FS detection. (#1528) * Version to make filesystem detection more reliable * Improve bad fs detection * Version of printf that doesn't suffer from buffer overflows (#1564) * Small improvement to http client (#1558) * Remove luaL_buffer from file_g_read() (#1541) * remove luaL_buffer from file_g_read() - avoid memory leak when function gets terminated by lua_error - skip scanning for end_char when reading until EOF * attempt to free memory in any case * Change HTTP failures from debug to error messages (#1568) * Change HTTP failures from debug to error messages * Add tag to HTTP error messages * Create macro for error msg and improve dbg msg * Add ssd1306_128x32 for U8G (#1571) * Update CONTRIBUTING.md * Add support to mix ws2812.buffer objects. (#1575) * Add load/dump/mix/power operations on the buffer object * Calculate the pixel value in mix and then clip to the range. * Fixed the two wrong userdata types * Added a couple more useful methods * Add support for shifting a piece of the buffer. * Fix a minor bug with offset shifts * Update to the wifi module (#1497) * Removed inline documentation for several functions and update comments Since documentation is now part of the repository, the inline documentation just adds to the already huge wifi.c * Wifi module: add new functionality, update documentation Functions Added: wifi.getdefaultmode(): returns default wifi opmode wifi.sta.apchange(): select alternate cached AP wifi.sta.apinfo(): get cached AP list wifi.sta.aplimit(): set cached AP limit wifi.sta.getapindex(): get index of currently configured AP wifi.sta.getdefaultconfig(): get default station configuration wifi.ap.getdefaultconfig(): get default AP configuration functions modified: wifi.setmode: saving mode to flash is now optional wifi.sta.config: now accepts table as an argument and save config to flash is now optional wifi.sta.getconfig: added option to return table wifi.ap.config: save config to flash is now optional wifi.ap.getconfig: added option to return table Documentation changes: - Modified documentation to reflect above changes - Removed unnecessary inline documentation from `wifi.c` - Updated documentation for `wifi.sta.disconnect`to address issue #1480 - Fixed inaccurate documentation for function `wifi.sleeptype` - Added more details to `wifi.nullmodesleep()` * Move function `wifi.sleeptype()` to `wifi.sta.sleeptype()` * Fixed problem where wifi.x.getconfig() returned invalid strings when ssid or password were set to maximum length. * fix error in documentation for `wifi.sta.getapindex` * Renamed some wifi functions wifi.sta.apinfo -> getapinfo wifi.sta.aplimit -> setaplimit wifi.sta.apchange -> changeap also organized the wifi_station_map array * Make the MQTT PING functionality work better. (#1557) Deal with flow control stopped case * Implement object model for files (#1532) * Eus channelfix (#1583) Squashed commits included: Bug fixes and final implementation - Added Content-Length: 0 to all headers - Endpoint name checks not using trailing space so cache-busting techniques can be used (i.e., append a nonce to the URL) - Track when connecting so APList scan doesn't take place during (which changes the channel) - More debugging output added to assist in tracking down some issues Added /status.json endpoint for phone apps/XHR to get JSON response Station Status caching for wifi channel workaround + AJAX/CORS - During checkstation poll, cache the last station status - Shut down the station if status = 2,3,4 and channel is different than SoftAP - Add Access-Control-Allow-Origin: * to endpoint responses used by a service - Add a /setwifi GET endpoint for phone apps/XHR to use (same parameters as /update endpoint). Returns a JSON response containing chip id and status code. - Add handler for OPTIONS verb (needed for CORS support) Wi-Fi Channel Issue Workaround - Do a site survey upon startup, set SoftAP channel to the strongest rssi's channel - Compare successful station connect channel to SoftAP's. If different, then defer the Lua success callback to the end. Shut down Station and start the SoftAP back up with original channel. - After the 10 second shutdown timer fires, check to see if success callback was already called. If not, then call it while starting the Station back up. HTTP Response and DNS enhancements - If DNS's UDP buffer fills up, keep going as non-fatal. It's UDP and not guaranteed anyways. I've seen this occur when connecting a PC to the SoftAP and every open program tries to phone home at the same time, overwhelming the EUS DNS server. - Support for detecting/handling pre-gzipped `enduser_setup.html` (and `http_html_backup`) payload. Nice for keeping the size of the `state->http_payload_data` as small as possible (also makes minimization not as critical) - Corrected misuse of HTTP 401 response status (changed one occurrence to 400/Bad Request, and changed another to 405/Method Not Allowed) * Normalized formatting (tabs-to-spaces) * Added documentation * Corrected misuse of strlen for binary (gzip) data. * Added NULL check after malloc * fix vfs_lseek() result checking in enduser_setup and clarify SPIFFS_lseek() return value (#1570) * Fix link * Overhaul flashing docs once again (#1587) * Add chapter about determine flash size plus small fixes * Rewrite esptool.py chapter, move flash size chapter to end * i2c - allow slave stretching SCL (just loop and check) (#1589) * Add note on dev board usage of SPI bus 0 (#1591) * Turn SPI busses note to admonition note * support for custom websocket headers (#1573) Looks good to me. Thank you. Also: - allow for '\0's in received messages * add client:config for setting websocket headers Also: - headers are case-insensitive now * fix docs * fix typo * remove unnecessary luaL_argcheck calls * replace os_sprintf with simple string copy * Handle error condition in file.read() (#1599) * handle error condition in file.read() * simplify loop initialization * Fix macro as suggested in #1548 * Extract and hoist net receive callbacks This is done to avoid the accidental upval binding * Fix typo at rtctime.md rtctime.dsleep -> rtctime.dsleep_aligned
-
- 27 Oct, 2016 1 commit
-
-
Philip Gladstone authored
-
- 16 Oct, 2016 1 commit
-
-
Philip Gladstone authored
-
- 05 Sep, 2016 2 commits
-
-
Arnim Läuger authored
* Add FatFs * enable BUILD_FATFS for all-module build * push vfs into rest of firmware * align maximum filename length * increase timeout for acmd41 during card initialization * switch from DOS to Unix path semantics chdrive() is substituted by chdir() * update to fatfs R.012a incl. patches 1-6 * add callback for rtc provisioning in file * update docs
-
Philip Gladstone authored
Fixes #1434.
-
- 20 Mar, 2016 1 commit
-
-
philip authored
-
- 11 Mar, 2016 1 commit
-
-
TerryE authored
-
- 26 Feb, 2016 1 commit
-
-
TerryE authored
AFAIK no one uses the wifi.startsmart() and wifi.stopsmart(). Removing them frees up an extra 20-25K of Flash to use as filesystem. So I have added a new config define WIFI_SMART_ENABLE which is enabled by default so the default functionality is the same, but if this is commented out then this code is omitted. I have also removed wofs and upgrade from this build as we no longer support these.
-
- 23 Jan, 2016 1 commit
-
-
devsaurus authored
-
- 23 Dec, 2015 1 commit
-
-
Johny Mattsson authored
Removed earlier TCP port randomisation fix - the new SDK has its own fix even though Espressif told me they wouldn't fix it. Yay?
-
- 16 Dec, 2015 1 commit
-
-
Johny Mattsson authored
Module creation & registration now made a lot simpler. In essence, each module file is now self-contained and only needs a NODEMCU_MODULE(MYNAME, "myname", myname_map, luaopen_myname); line to both be automatically recognised by the Lua initialization as well as honor the LUA_USE_MODULES_MYNAME #define.
-
- 12 Dec, 2015 1 commit
-
-
Johny Mattsson authored
As per #810 & #796, only LUA_OPTIMIZE_MEMORY=2 & MIN_OPT_LEVEL=2 are supported when building. This commit effects that limitation. With this change modules/auxmods.h no longer needs to be updated for every new module, nor do module writers need to cater for a hypothetical LUA_OPTIMIZE_MEMORY < 2 scenario.
-
- 05 Dec, 2015 1 commit
-
-
Nick Andrew authored
When lua assertions are enabled, normal operation results in many: lobject.c:88: (((t1)->tt) == 4) lobject.c:88: (((t2)->tt) == 4) lobject.c:88: (((t1)->tt) == 4) lobject.c:88: (((t2)->tt) == 4) lobject.c:88: (((t1)->tt) == 4) lobject.c:88: (((t2)->tt) == 4) It comes from using the pvalue() macro for 3 pointer types, where pvalue() also checks the type of pointer and complains through the assertion where the type == 4 (TLIGHTUSERDATA). Use the correct macro according to the type of data being compared to eliminate this assertion error. Signed-off-by:
Nick Andrew <nick@nick-andrew.net>
-
- 03 Dec, 2015 1 commit
-
-
TerryE authored
-
- 01 Dec, 2015 1 commit
-
-
Johny Mattsson authored
It really does not improve things...
-
- 22 Nov, 2015 1 commit
-
-
devsaurus authored
-
- 18 Nov, 2015 1 commit
-
-
devsaurus authored
-
- 08 Nov, 2015 1 commit
-
-
TerryE authored
-
- 03 Nov, 2015 3 commits
- 12 Oct, 2015 3 commits
-
-
Johny Mattsson authored
It was piggybacking on the Lua readline timer which no longer exists. Also cleaned up injection of Lua commands via CoAP & node.input().
-
Johny Mattsson authored
The Lua input timer has been the thorn in the side which prevents a lot of potential sleeping, unnecessarily.
-
Johny Mattsson authored
-
- 05 Apr, 2015 1 commit
-
-
cal authored
-
- 14 Mar, 2015 1 commit
-
-
Erant authored
-
- 06 Mar, 2015 3 commits
- 01 Mar, 2015 1 commit
-
-
devsaurus authored
-
- 14 Feb, 2015 1 commit
-
-
funshine authored
-
- 13 Feb, 2015 3 commits
- 12 Feb, 2015 1 commit
-
-
funshine authored
-
- 11 Feb, 2015 1 commit
-
-
HuangRui authored
-