1. 30 Jan, 2024 1 commit
    • Johny Mattsson's avatar
      Initial migration to IDFv5.0 · f126b6fe
      Johny Mattsson authored
      Plenty of dependency adjustments, printf format specificier updates,
      FreeRTOS type and macro name modernisation, not to mention API changes.
      
      Still plenty of legacy/deprecated drivers in use which will need updating.
      
      The following features have been removed due to no longer being available
      from the IDF:
        - ADC hall effect sensor reading
        - Configuration of SD SPI host via sdmmc module (now must be done first
          via the spimaster module)
        - FAT partition selection on external SD cards; only the first FAT
          partition is supported by the IDF now
      
      On the other hand, the eth module now supports the following new chipsets:
        - KSZ8001
        - KSZ8021
        - KSZ8031
        - KSZ8051
        - KSZ8061
        - KSZ8091
        - Possibly additional models in the LAN87xx series (the IDF docs aren't
          clear on precisely which models are handled)
      
      Further, the sdmmc module is now available on the ESP32-S3 as well.
      f126b6fe
  2. 23 Jan, 2024 1 commit
  3. 18 May, 2023 1 commit
  4. 13 May, 2023 3 commits
    • Tom Sutcliffe's avatar
      Fix i2c.setup() for pins >= 32 · 4523bbb3
      Tom Sutcliffe authored
      Which includes SDA and SCL on esp32s2.
      4523bbb3
    • Tom Sutcliffe's avatar
      Fix platform_rmt_allocate for esp32-S3 · 7155d719
      Tom Sutcliffe authored
      By not relying on ifdefing for specific targets, but instead using the
      SOC_RMT_xxx macros to figure it out.
      7155d719
    • Tom Sutcliffe's avatar
      Fix ws2812 on later esp32 variants · 1b38d8e6
      Tom Sutcliffe authored
      By not relying on the internal details of the RMT registers. For example
      on the esp32s2, the threshold event bits start at bit 12 not bit 24, and
      on the esp32s3 the memory buffers are only 48 words not 64. Also the
      esp-idf recommends against hooking the rmt ISR in the first place.
      
      Instead, use the published rmt APIs (specifically rmt_write_sample and
      rmt_translator_init) and the default rmt ISR, which should be much more
      resilient against future esp32 SoC changes.
      1b38d8e6
  5. 09 Feb, 2023 2 commits
  6. 17 Jan, 2023 3 commits
  7. 19 Dec, 2022 1 commit
    • Tom Sutcliffe's avatar
      Make sodium.random API behave consistently on all build types · a40d69db
      Tom Sutcliffe authored
      By returning result as a signed 32-bit int between INT32_MIN to IN32_MAX
      which is represented the same regardless of 64-bit support or
      integral-only builds.
      
      Also updated docs, fixed links and clarified behavior of random APIs
      when WiFi isn't started.
      a40d69db
  8. 17 Nov, 2022 1 commit
  9. 08 Nov, 2022 1 commit
    • Tom Sutcliffe's avatar
      Fix file.list() zero sizes. Fixes #3549. · e3883cd2
      Tom Sutcliffe authored
      The modern spiffs backend doesn't like stat("./somefile") for something
      on the root of the filesystem, and instead only accepts "somefile"
      (it also doesn't like "/somefile"). The error from stat was being
      ignored which is why the file sizes all appeared to be zero.
      
      The fix is to change file.list() to pass just the filename, unless a
      directory was passed to list(). Also improved error handling a bit.
      e3883cd2
  10. 12 Oct, 2022 1 commit
    • Johny Mattsson's avatar
      Upgrade IDF to v4.4.2 · 38ccd7b2
      Johny Mattsson authored
      Slightly reworked embed_lfs.sh to better cope with attribute size changes
      in future compiler versions, without needing to be updated again.
      
      RMT register naming changed once again...
      38ccd7b2
  11. 05 Oct, 2022 4 commits
  12. 30 Sep, 2022 2 commits
  13. 30 Aug, 2022 3 commits
  14. 29 Aug, 2022 3 commits
  15. 04 Jun, 2022 3 commits
    • h2zero's avatar
      Explicitly set RMT config::flags. · b8ae6ca6
      h2zero authored
      If this variable is not set in the config it may contain random data and set the clock source to the REF_CLK
      resulting in timing errors, the DHTx, DS18B20 and ws2812 devices to not communicate.
      b8ae6ca6
    • h2zero's avatar
      Ensure flash address is set before obtaining memory mapped address. · 484a7721
      h2zero authored
      Before this change the struck member add_phys would contain random data and the call to spi_flash_phys2cache
      could return an incorrect memory address.
      484a7721
    • h2zero's avatar
      Fix node.compile fwrite size check. · c75ec760
      h2zero authored
      The return value from fwrite was being checked against the size of the data rather than the number of bytes written.
      This caused node.compile() to falsely return failure.
      c75ec760
  16. 20 May, 2022 1 commit
  17. 05 Mar, 2022 2 commits
    • Philip Gladstone's avatar
      First attempt at adding support for the RMT device. (#3493) · ceb62993
      Philip Gladstone authored
      * Adding the first version of the rmt documentation.
      
      * Stub RMT module compiles.
      
      * This version seems to work in (at least) simple cases.
      
      * CLean up the docs
      
      * Minor fixes
      
      * Give the SPI module a chance of working...
      
      * Update to the released version of idf4.4
      
      * Try to get the CI Build to work in all cases
      
      * Try to get the CI Build to work in all cases
      
      * FIx a ringbuffer return issue
      
      * Remove bogus comment
      
      * Review comments
      
      * Better example of transmission
      
      * Review comments
      
      * Add table send example
      
      * Improved documentation
      
      * Documentation comments
      
      * Install the driver correctly.
      
      * A couple of doc updates
      
      * Fix typo
      ceb62993
    • Johny Mattsson's avatar
      IDF web server module (#3502) · cb434811
      Johny Mattsson authored
      * Added httpd module.
      
      Lua-interface to the standard esp_http_server component.
      
      * Added eromfs module.
      cb434811
  18. 27 Jan, 2022 1 commit
  19. 26 Jan, 2022 2 commits
  20. 07 Jan, 2022 1 commit
  21. 02 Jan, 2022 1 commit
  22. 13 Nov, 2021 1 commit
  23. 04 Nov, 2021 1 commit
    • Johny Mattsson's avatar
      Make node.output() RTOS thread safe. · a0c9085c
      Johny Mattsson authored
      Also removed old, very unsafe node.osoutput(). We're now integrating cleanly
      with the IDF/newlib way of redirecting stdout.
      
      Added necessary depends in Kconfig to ensure VFS support is enabled, as
      otherwise you'd only get a mysterious crash when attempting to enable
      output redirection.
      a0c9085c