- 04 Aug, 2015 1 commit
-
-
antirez authored
This commit attempts to fix a bug involving PSYNC and diskless replication (currently experimental) found by Yuval Inbar from Redis Labs and that was later found to have even more far reaching effects (the bug also exists when diskstore is off). The gist of the bug is that, a Redis master replies with +FULLRESYNC to a PSYNC attempt that fails and requires a full resynchronization. However, the baseline offset sent along with FULLRESYNC was always the current master replication offset. This is not ok, because there are many reasosn that may delay the RDB file creation. And... guess what, the master offset we communicate must be the one of the time the RDB was created. So for example: 1) When the BGSAVE for replication is delayed since there is one already but is not good for replication. 2) When the BGSAVE is not needed as we attach one currently ongoing. 3) When because of diskless replication the BGSAVE is delayed. In all the above cases the PSYNC reply is wrong and the slave may reconnect later claiming to need a wrong offset: this may cause data curruption later.
-
- 28 Jul, 2015 2 commits
-
-
antirez authored
Using chained replication where C is slave of B which is in turn slave of A, if B reconnects the replication link with A but discovers it is no longer possible to PSYNC, slaves of B must be disconnected and PSYNC not allowed, since the new B dataset may be completely different after the synchronization with the master. Note that there are varius semantical differences in the way this is handled now compared to the past. In the past the semantics was: 1. When a slave lost connection with its master, disconnected the chained slaves ASAP. Which is not needed since after a successful PSYNC with the master, the slaves can continue and don't need to resync in turn. 2. However after a failed PSYNC the replication backlog was not reset, so a slave was able to PSYNC successfully even if the instance did a full sync with its master, containing now an entirely different data set. Now instead chained slaves are not disconnected when the slave lose the connection with its master, but only when it is forced to full SYNC with its master. This means that if the slave having chained slaves does a successful PSYNC all its slaves can continue without troubles. See issue #2694 for more details.
-
antirez authored
-
- 27 Jul, 2015 1 commit
-
-
antirez authored
-
- 26 Jul, 2015 6 commits
- 11 Jun, 2015 1 commit
-
-
antirez authored
We usually want to reach the master using the address of the interface Redis is bound to (via the "bind" config option). That's useful since the master will get (and publish) the slave address getting the peer name of the incoming socket connection from the slave. However, when this is not possible, for example because the slave is bound to the loopback interface but repliaces from a master accessed via an external interface, we want to still connect with the master even from a different interface: in this case it is not really important that the master will provide any other address, while it is vital to be able to replicate correctly. Related to issues #2609 and #2612.
-
- 01 Apr, 2015 1 commit
-
-
antirez authored
When we fail to setup the write handler it does not make sense to take the client around, it is missing writes: whatever is a client or a slave anyway the connection should terminated ASAP. Moreover what the function does exactly with its return value, and in which case the write handler is installed on the socket, was not clear, so the functions comment are improved to make the goals of the function more obvious. Also related to #2485.
-
- 31 Mar, 2015 1 commit
-
-
Oran Agra authored
master was closing the connection if the RDB transfer took long time. and also sent PINGs to the slave before it got the initial ACK, in which case the slave wouldn't be able to find the EOF marker.
-
- 24 Mar, 2015 1 commit
-
-
antirez authored
Bug as old as Redis and blocking operations. It's hard to trigger since only happens on instance role switch, but the results are quite bad since an inconsistency between master and slave is created. How to trigger the bug is a good description of the bug itself. 1. Client does "BLPOP mylist 0" in master. 2. Master is turned into slave, that replicates from New-Master. 3. Client does "LPUSH mylist foo" in New-Master. 4. New-Master propagates write to slave. 5. Slave receives the LPUSH, the blocked client get served. Now Master "mylist" key has "foo", Slave "mylist" key is empty. Highlights: * At step "2" above, the client remains attached, basically escaping any check performed during command dispatch: read only slave, in that case. * At step "5" the slave (that was the master), serves the blocked client consuming a list element, which is not consumed on the master side. This scenario is technically likely to happen during failovers, however since Redis Sentinel already disconnects clients using the CLIENT command when changing the role of the instance, the bug is avoided in Sentinel deployments. Closes #2473.
-
- 04 Feb, 2015 1 commit
-
-
antirez authored
-
- 11 Dec, 2014 2 commits
-
-
antirez authored
A few code style changes + consistent format: not nice for humans but better for parsers.
-
Matt Stancliff authored
Instead of manually checking for strchr(n,':') everywhere, we can use our new centralized IP formatting functions.
-
- 03 Dec, 2014 1 commit
-
-
antirez authored
Track bandwidth used by clients and replication (but diskless replication is not tracked since the actual transfer happens in the child process). This includes a refactoring that makes tracking new instantaneous metrics simpler.
-
- 11 Nov, 2014 2 commits
-
-
antirez authored
RDB EOF detection was relying on the final part of the RDB transfer to be a magic 40 bytes EOF marker. However as the slave is put online immediately, and because of sockets timeouts, the replication stream is actually contiguous with the RDB file. This means that to detect the EOF correctly we should either: 1) Scan all the stream searching for the mark. Sucks CPU-wise. 2) Start to send the replication stream only after an acknowledge. 3) Implement a proper chunked encoding. For now solution "2" was picked, so the master does not start to send ASAP the stream of commands in the case of diskless replication. We wait for the first REPLCONF ACK command from the slave, that certifies us that the slave correctly loaded the RDB file and is ready to get more data.
-
antirez authored
-
- 29 Oct, 2014 2 commits
-
-
Matt Stancliff authored
Same as the original bind fixes (we just missed these the first time around). This helps Redis not automatically send connections from the first IP on an interface if we are bound to a specific IP address (e.g. with multiple IP aliases on one interface, you want to send from _your_ IP, not from the first IP on the interface).
-
antirez authored
This caused BGSAVE to be triggered a second time without any need when we switch from socket to disk target via the command CONFIG SET repl-diskless-sync no and there is already a slave waiting for the BGSAVE to start. Also comments clarified about what is happening.
-
- 27 Oct, 2014 4 commits
- 24 Oct, 2014 1 commit
-
-
antirez authored
-
- 17 Oct, 2014 6 commits
-
-
antirez authored
-
antirez authored
While the socket is set in blocking mode, we still can get short writes writing to a socket.
-
antirez authored
This is useful for normal replication in order to refresh the slave when we are persisting on disk, but for diskless replication the child is already receiving data while in WAIT_BGSAVE_END state.
-
antirez authored
-
antirez authored
-
antirez authored
-
- 16 Oct, 2014 5 commits
-
-
antirez authored
-
antirez authored
-
antirez authored
If we turn from diskless to disk-based replication via CONFIG SET, we need a way to start a BGSAVE if there are slaves alerady waiting for a BGSAVE to start. Normally with disk-based replication we do it as soon as the previous child exits, but when there is a configuration change via CONFIG SET, we may have slaves in WAIT_BGSAVE_START state without an RDB background process currently active.
-
antirez authored
-
antirez authored
-
- 15 Oct, 2014 1 commit
-
-
antirez authored
-
- 14 Oct, 2014 1 commit
-
-
antirez authored
-