1. 20 Jun, 2023 1 commit
    • Oran Agra's avatar
      Fix broken protocol when PUBLISH emits local push inside MULTI (#12326) · 8ad8f0f9
      Oran Agra authored
      When a connection that's subscribe to a channel emits PUBLISH inside MULTI-EXEC,
      the push notification messes up the EXEC response.
      
      e.g. MULTI, PING, PUSH foo bar, PING, EXEC
      the EXEC's response will contain: PONG, {message foo bar}, 1. and the second PONG
      will be delivered outside the EXEC's response.
      
      Additionally, this PR changes the order of responses in case of a plain PUBLISH (when
      the current client also subscribed to it), by delivering the push after the command's
      response instead of before it.
      This also affects modules calling RM_PublishMessage in a similar way, so that we don't
      run the risk of getting that push mixed together with the module command's response.
      8ad8f0f9
  2. 11 Jun, 2023 1 commit
    • YaacovHazan's avatar
      Reset command duration for rejected command. (#12247) · 0bfb6d55
      YaacovHazan authored
      In 7.2, After 971b177f
      
       we make sure (assert) that
      the duration has been recorded when resetting the client.
      
      This is not true for rejected commands.
      The use case I found is a blocking command that an ACL rule changed before
      it was unblocked, and while reprocessing it, the command rejected and triggered the assert.
      
      The PR reset the command duration inside rejectCommand / rejectCommandSds.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      0bfb6d55
  3. 24 May, 2023 1 commit
    • judeng's avatar
      postpone the initialization of oject's lru&lfu until it is added to the db as... · d71478a8
      judeng authored
      postpone the initialization of oject's lru&lfu until it is added to the db as a value object (#11626)
      
      This pr can get two performance benefits:
      1. Stop redundant initialization when most robj objects are created
      2. LRU_CLOCK will no longer be called in io threads, so we can avoid the `atomicGet`
      
      Another code optimization:
      deleted the redundant judgment in dbSetValue, no matter in LFU or LRU, the lru field inold
      robj is always the freshest (it is always updated in lookupkey), so we don't need to judge if in LFU
      d71478a8
  4. 12 May, 2023 1 commit
    • Chen Tianjie's avatar
      Add basic eventloop latency measurement. (#11963) · 29ca8795
      Chen Tianjie authored
      The measured latency(duration) includes the list below, which can be shown by `INFO STATS`.
      ```
      eventloop_cycles  // ever increasing counter
      eventloop_duration_sum // cumulative duration of eventloop in microseconds
      eventloop_duration_cmd_sum  // cumulative duration of executing commands in microseconds
      instantaneous_eventloop_cycles_per_sec  // average eventloop count per second in recent 1.6s
      instantaneous_eventloop_duration_usec  // average single eventloop duration in recent 1.6s
      ```
      
      Also added some experimental metrics, which are shown only when `INFO DEBUG` is called.
      This section isn't included in the default INFO, or even in `INFO ALL` and the fields in this section
      can change in the future without considering backwards compatibility.
      ```
      eventloop_duration_aof_sum  // cumulative duration of writing AOF
      eventloop_duration_cron_sum  // cumulative duration cron jobs (serverCron, beforeSleep excluding IO and AOF)
      eventloop_cmd_per_cycle_max  // max number of commands executed in one eventloop
      eventloop_duration_max  // max duration of one eventloop
      ```
      
      All of these are being reset by CONFIG RESETSTAT
      29ca8795
  5. 06 May, 2023 1 commit
    • zhaozhao.zz's avatar
      Free backlog only if rsi is invalid when master reboot (#12088) · b0dd7b32
      zhaozhao.zz authored
      When master reboot from RDB, if rsi in RDB is valid we should not free replication backlog, even if master_repl_offset or repl-offset is 0.
      
      Since if master doesn't send any data to replicas master_repl_offset is 0, it's a valid number.
      
      A clear example:
      
      1. start a master and apply some write commands, the master's master_repl_offset is 0 since it has no replicas.
      2. stop write commands on master, and start another instance and replicaof the master, trigger an FULLRESYNC
      3. the master's master_repl_offset is still 0 (set a large number for repl-ping-replica-period), do BGSAVE and restart the master
      4. master load master_repl_offset from RDB's rsi and it's still 0, and we should make sure replica can partially resync with master.
      b0dd7b32
  6. 03 May, 2023 1 commit
    • Madelyn Olson's avatar
      Remove prototypes with empty declarations (#12020) · 5e3be1be
      Madelyn Olson authored
      Technically declaring a prototype with an empty declaration has been deprecated since the early days of C, but we never got a warning for it. C2x will apparently be introducing a breaking change if you are using this type of declarator, so Clang 15 has started issuing a warning with -pedantic. Although not apparently a problem for any of the compiler we build on, if feels like the right thing is to properly adhere to the C standard and use (void).
      5e3be1be
  7. 24 Apr, 2023 2 commits
    • zhaozhao.zz's avatar
      iterate clients fairly in clientsCron() (#12025) · bedecec7
      zhaozhao.zz authored
      Every time when accept a connection, we add the client to `server.clients` list's tail, but in `clientsCron` we rotate the tail to head at first, and then process the head. It means that the "new" client would be processed before "old" client, moreover if connections established and then freed frequently, the "old" client may have no chance to be processed.
      
      To fix it, we need take a fair way to iterate the list, that is take the current head and process, and then rotate the head to tail, thus we can make sure all clients could be processed step by step.
      
      p.s. client has `client_list_node` pointer, we don't need put the current client to head to avoid O(N) when remove it.
      bedecec7
    • Binbin's avatar
      Report AOF failure status to systemd in shutdown (#12065) · 78202f84
      Binbin authored
      Since we do report the RDB error in below:
      ```
      serverLog(LL_WARNING,"Error trying to save the DB, can't exit.");
      if (server.supervised_mode == SUPERVISED_SYSTEMD)
          redisCommunicateSystemd("STATUS=Error trying to save the DB, can't exit.\n");
      goto error;
      ```
      
      This may be an overlook in #6052
      78202f84
  8. 20 Apr, 2023 1 commit
    • YaacovHazan's avatar
      Misuse of bool in redis (#12077) · 74959a0f
      YaacovHazan authored
      We currently do not allow the use of bool type in redis project.
      
      We didn't catch it in script.c because we included hdr_histogram.h in server.h
      
      Removing it (but still having it in some c files) reducing
      the chance to miss the usage of bool type in the future and catch it
      in compiling stage.
      
      It also removes the dependency on hdr_histogram for every unit
      that includes server.h
      74959a0f
  9. 19 Apr, 2023 1 commit
  10. 18 Apr, 2023 1 commit
    • sundb's avatar
      Fix some compile warnings and errors when building with gcc-12 or clang (#12035) · 42c8c618
      sundb authored
      This PR is to fix the compilation warnings and errors generated by the latest
      complier toolchain, and to add a new runner of the latest toolchain for daily CI.
      
      ## Fix various compilation warnings and errors
      
      1) jemalloc.c
      
      COMPILER: clang-14 with FORTIFY_SOURCE
      
      WARNING:
      ```
      src/jemalloc.c:1028:7: warning: suspicious concatenation of string literals in an array initialization; did you mean to separate the elements with a comma? [-Wstring-concatenation]
                          "/etc/malloc.conf",
                          ^
      src/jemalloc.c:1027:3: note: place parentheses around the string literal to silence warning
                      "\"name\" of the file referenced by the symbolic link named "
                      ^
      ```
      
      REASON:  the compiler to alert developers to potential issues with string concatenation
      that may miss a comma,
      just like #9534 which misses a comma.
      
      SOLUTION: use `()` to tell the compiler that these two line strings are continuous.
      
      2) config.h
      
      COMPILER: clang-14 with FORTIFY_SOURCE
      
      WARNING:
      ```
      In file included from quicklist.c:36:
      ./config.h:319:76: warning: attribute declaration must precede definition [-Wignored-attributes]
      char *strcat(char *restrict dest, const char *restrict src) __attribute__((deprecated("please avoid use of unsafe C functions. prefer use of redis_strlcat instead")));
      ```
      
      REASON: Enabling _FORTIFY_SOURCE will cause the compiler to use `strcpy()` with check,
      it results in a deprecated attribute declaration after including <features.h>.
      
      SOLUTION: move the deprecated attribute declaration from config.h to fmacro.h before "#include <features.h>".
      
      3) networking.c
      
      COMPILER: GCC-12
      
      WARNING: 
      ```
      networking.c: In function ‘addReplyDouble.part.0’:
      networking.c:876:21: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
        876 |         dbuf[start] = '$';
            |                     ^
      networking.c:868:14: note: at offset -5 into destination object ‘dbuf’ of size 5152
        868 |         char dbuf[MAX_LONG_DOUBLE_CHARS+32];
            |              ^
      networking.c:876:21: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
        876 |         dbuf[start] = '$';
            |                     ^
      networking.c:868:14: note: at offset -6 into destination object ‘dbuf’ of size 5152
        868 |         char dbuf[MAX_LONG_DOUBLE_CHARS+32];
      ```
      
      REASON: GCC-12 predicts that digits10() may return 9 or 10 through `return 9 + (v >= 1000000000UL)`.
      
      SOLUTION: add an assert to let the compiler know the possible length;
      
      4) redis-cli.c & redis-benchmark.c
      
      COMPILER: clang-14 with FORTIFY_SOURCE
      
      WARNING:
      ```
      redis-benchmark.c:1621:2: warning: embedding a directive within macro arguments has undefined behavior [-Wembedded-directive] #ifdef USE_OPENSSL
      redis-cli.c:3015:2: warning: embedding a directive within macro arguments has undefined behavior [-Wembedded-directive] #ifdef USE_OPENSSL
      ```
      
      REASON: when _FORTIFY_SOURCE is enabled, the compiler will use the print() with
      check, which is a macro. this may result in the use of directives within the macro, which
      is undefined behavior.
      
      SOLUTION: move the directives-related code out of `print()`.
      
      5) server.c
      
      COMPILER: gcc-13 with FORTIFY_SOURCE
      
      WARNING:
      ```
      In function 'lookupCommandLogic',
          inlined from 'lookupCommandBySdsLogic' at server.c:3139:32:
      server.c:3102:66: error: '*(robj **)argv' may be used uninitialized [-Werror=maybe-uninitialized]
       3102 |     struct redisCommand *base_cmd = dictFetchValue(commands, argv[0]->ptr);
            |                                                              ~~~~^~~
      ```
      
      REASON: The compiler thinks that the `argc` returned by `sdssplitlen()` could be 0,
      resulting in an empty array of size 0 being passed to lookupCommandLogic.
      this should be a false positive, `argc` can't be 0 when strings are not NULL.
      
      SOLUTION: add an assert to let the compiler know that `argc` is positive.
      
      6) sha1.c
      
      COMPILER: gcc-12
      
      WARNING:
      ```
      In function ‘SHA1Update’,
          inlined from ‘SHA1Final’ at sha1.c:195:5:
      sha1.c:152:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
        152 |             SHA1Transform(context->state, &data[i]);
            |             ^
      sha1.c:152:13: note: referencing argument 2 of type ‘const unsigned char[64]’
      sha1.c: In function ‘SHA1Final’:
      sha1.c:56:6: note: in a call to function ‘SHA1Transform’
         56 | void SHA1Transform(uint32_t state[5], const unsigned char buffer[64])
            |      ^
      In function ‘SHA1Update’,
          inlined from ‘SHA1Final’ at sha1.c:198:9:
      sha1.c:152:13: warning: ‘SHA1Transform’ reading 64 bytes from a region of size 0 [-Wstringop-overread]
        152 |             SHA1Transform(context->state, &data[i]);
            |             ^
      sha1.c:152:13: note: referencing argument 2 of type ‘const unsigned char[64]’
      sha1.c: In function ‘SHA1Final’:
      sha1.c:56:6: note: in a call to function ‘SHA1Transform’
         56 | void SHA1Transform(uint32_t state[5], const unsigned char buffer[64])
      ```
      
      REASON: due to the bug[https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80922], when
      enable LTO, gcc-12 will not see `diagnostic ignored "-Wstringop-overread"`, resulting in a warning.
      
      SOLUTION: temporarily set SHA1Update to noinline to avoid compiler warnings due
      to LTO being enabled until the above gcc bug is fixed.
      
      7) zmalloc.h
      
      COMPILER: GCC-12
      
      WARNING: 
      ```
      In function ‘memset’,
          inlined from ‘moduleCreateContext’ at module.c:877:5,
          inlined from ‘RM_GetDetachedThreadSafeContext’ at module.c:8410:5:
      /usr/include/x86_64-linux-gnu/bits/string_fortified.h:59:10: warning: ‘__builtin_memset’ writing 104 bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
         59 |   return __builtin___memset_chk (__dest, __ch, __len,
      ```
      
      REASON: due to the GCC-12 bug [https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96503],
      GCC-12 cannot see alloc_size, which causes GCC to think that the actual size of memory
      is 0 when checking with __glibc_objsize0().
      
      SOLUTION: temporarily set malloc-related interfaces to `noinline` to avoid compiler warnings
      due to LTO being enabled until the above gcc bug is fixed.
      
      ## Other changes
      1) Fixed `ps -p [pid]`  doesn't output `<defunct>` when using procps 4.x causing `replication
        child dies when parent is killed - diskless` test to fail.
      2) Add a new fortify CI with GCC-13 and ubuntu-lunar docker image.
      42c8c618
  11. 16 Apr, 2023 1 commit
    • judeng's avatar
      avoid incorrect shrinking of querybuf when client is reading a big argv (#12000) · e7f18432
      judeng authored
      this pr fix two wrongs:
      1. When client’s querybuf is pre-allocated for a fat argv, we need to update the
        querybuf_peak of the client immediately to completely avoid the unexpected
        shrinking of querybuf in the next clientCron (before data arrives to set the peak).
      2. the protocol's bulklen does not include `\r\n`, but the allocation and the data we
        read does. so in `clientsCronResizeQueryBuffer`, the `resize` or `querybuf_peak`
        should add these 2 bytes.
      
      the first bug is likely to hit us on large payloads over slow connections, in which case
      transferring the payload can take longer and a cron event will be triggered (specifically
      if there are not a lot of clients)
      e7f18432
  12. 04 Apr, 2023 1 commit
    • Binbin's avatar
      Changed activeExpireCycle server.masterhost check to iAmMaster in beforeSleep (#11997) · aee8d1ff
      Binbin authored
      In cluster mode, when a node restart as a replica, it doesn't immediately
      sync with the master, replication is enabled in clusterCron. It means that
      sometime server.masterhost is NULL and we wrongly judge it in beforeSleep.
      
      In this case, we may trigger a fast activeExpireCycle in beforeSleep, but the
      node's flag is actually a replica, that can lead to data inconsistency.  In this
      PR, we use iAmMaster to replace the `server.masterhost == NULL`
      
      This is an overlook in #7001, and more discussion in #11783.
      aee8d1ff
  13. 30 Mar, 2023 2 commits
    • Jason Elbaum's avatar
      Reimplement cli hints based on command arg docs (#10515) · 1f76bb17
      Jason Elbaum authored
      
      
      Now that the command argument specs are available at runtime (#9656), this PR addresses
      #8084 by implementing a complete solution for command-line hinting in `redis-cli`.
      
      It correctly handles nearly every case in Redis's complex command argument definitions, including
      `BLOCK` and `ONEOF` arguments, reordering of optional arguments, and repeated arguments
      (even when followed by mandatory arguments). It also validates numerically-typed arguments.
      It may not correctly handle all possible combinations of those, but overall it is quite robust.
      
      Arguments are only matched after the space bar is typed, so partial word matching is not
      supported - that proved to be more confusing than helpful. When the user's current input
      cannot be matched against the argument specs, hinting is disabled.
      
      Partial support has been implemented for legacy (pre-7.0) servers that do not support
      `COMMAND DOCS`, by falling back to a statically-compiled command argument table.
      On startup, if the server does not support `COMMAND DOCS`, `redis-cli` will now issue
      an `INFO SERVER` command to retrieve the server version (unless `HELLO` has already
      been sent, in which case the server version will be extracted from the reply to `HELLO`).
      The server version will be used to filter the commands and arguments in the command table,
      removing those not supported by that version of the server. However, the static table only
      includes core Redis commands, so with a legacy server hinting will not be supported for
      module commands. The auto generated help.h and the scripts that generates it are gone.
      
      Command and argument tables for the server and CLI use different structs, due primarily
      to the need to support different runtime data. In order to generate code for both, macros
      have been added to `commands.def` (previously `commands.c`) to make it possible to
      configure the code generation differently for different use cases (one linked with redis-server,
      and one with redis-cli).
      
      Also adding a basic testing framework for the command hints based on new (undocumented)
      command line options to `redis-cli`: `--test_hint 'INPUT'` prints out the command-line hint for
      a given input string, and `--test_hint_file <filename>` runs a suite of test cases for the hinting
      mechanism. The test suite is in `tests/assets/test_cli_hint_suite.txt`, and it is run from
      `tests/integration/redis-cli.tcl`.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarViktor Söderqvist <viktor.soderqvist@est.tech>
      1f76bb17
    • Madelyn Olson's avatar
      Fixed tracking of command duration for multi/eval/module/wait (#11970) · 971b177f
      Madelyn Olson authored
      In #11012, we changed the way command durations were computed to handle the same command being executed multiple times. This commit fixes some misses from that commit.
      
      * Wait commands were not correctly reporting their duration if the timeout was reached.
      * Multi/scripts/and modules with RM_Call were not properly resetting the duration between inner calls, leading to them reporting cumulative duration.
      * When a blocked client is freed, the call and duration are always discarded.
      
      This commit also adds an assert if the duration is not properly reset, potentially indicating that a report to call statistics was missed. The assert potentially be removed in the future, as it's mainly intended to detect misses in tests.
      971b177f
  14. 29 Mar, 2023 1 commit
    • Binbin's avatar
      Fix fork done handler wrongly update fsync metrics and enhance AOF_ FSYNC_ALWAYS (#11973) · cb171786
      Binbin authored
      This PR fix several unrelated bugs that were discovered by the same set of tests
      (WAITAOF tests in #11713), could make the `WAITAOF` test hang. 
      
      The change in `backgroundRewriteDoneHandler` is about MP-AOF.
      That leftover / old code assumes that we started a new AOF file just now
      (when we have a new base into which we're gonna incrementally write), but
      the fact is that with MP-AOF, the fork done handler doesn't really affect the
      incremental file being maintained by the parent process, there's no reason to
      re-issue `SELECT`, and no reason to update any of the fsync variables in that flow.
      This should have been deleted with MP-AOF (introduced in #9788, 7.0).
      The damage is that the update to `aof_fsync_offset` will cause us to miss an fsync
      in `flushAppendOnlyFile`, that happens if we stop write commands in `AOF_FSYNC_EVERYSEC`
      while an AOFRW is in progress. This caused a new `WAITAOF` test to sometime hang forever.
      
      Also because of MP-AOF, we needed to change `aof_fsync_offset` to `aof_last_incr_fsync_offset`
      and match it to `aof_last_incr_size` in `flushAppendOnlyFile`. This is because in the past we compared
      `aof_fsync_offset` and `aof_current_size`, but with MP-AOF it could be the total AOF file will be
      smaller after AOFRW, and the (already existing) incr file still has data that needs to be fsynced.
      
      The change in `flushAppendOnlyFile`, about the `AOF_FSYNC_ALWAYS`, it is follow #6053
      (the details is in #5985), we also check `AOF_FSYNC_ALWAYS` to handle a case where
      appendfsync is changed from everysec to always while there is data that's written but not yet fsynced.
      cb171786
  15. 20 Mar, 2023 1 commit
    • Shaya Potter's avatar
      Don't run command filter on blocked command reprocessing (#11895) · 6cf8fc08
      Shaya Potter authored
      
      
      Previously we would run the module command filters even upon blocked
      command reprocessing.  This could modify the command, and it's args.
      This is irrelevant in the context of a command being reprocessed (it already
      went through the filters), as well as breaks the crashed command lookup
      that exists in the case of a reprocessed command.
      
      fixes #11894.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      6cf8fc08
  16. 16 Mar, 2023 2 commits
    • Meir Shpilraien (Spielrein)'s avatar
      Support for RM_Call on blocking commands (#11568) · d0da0a6a
      Meir Shpilraien (Spielrein) authored
      Allow running blocking commands from within a module using `RM_Call`.
      
      Today, when `RM_Call` is used, the fake client that is used to run command
      is marked with `CLIENT_DENY_BLOCKING` flag. This flag tells the command
      that it is not allowed to block the client and in case it needs to block, it must
      fallback to some alternative (either return error or perform some default behavior).
      For example, `BLPOP` fallback to simple `LPOP` if it is not allowed to block.
      
      All the commands must respect the `CLIENT_DENY_BLOCKING` flag (including
      module commands). When the command invocation finished, Redis asserts that
      the client was not blocked.
      
      This PR introduces the ability to call blocking command using `RM_Call` by
      passing a callback that will be called when the client will get unblocked.
      In order to do that, the user must explicitly say that he allow to perform blocking
      command by passing a new format specifier argument, `K`, to the `RM_Call`
      function. This new flag will tell Redis that it is allow to run blocking command
      and block the client. In case the command got blocked, Redis will return a new
      type of call reply (`REDISMODULE_REPLY_PROMISE`). This call reply indicates
      that the command got blocked and the user can set the on_unblocked handler using
      `RM_CallReplyPromiseSetUnblockHandler`.
      
      When clients gets unblocked, it eventually reaches `processUnblockedClients` function.
      This is where we check if the client is a fake module client and if it is, we call the unblock
      callback instead of performing the usual unblock operations.
      
      **Notice**: `RM_CallReplyPromiseSetUnblockHandler` must be called atomically
      along side the command invocation (without releasing the Redis lock in between).
      In addition, unlike other CallReply types, the promise call reply must be released
      by the module when the Redis GIL is acquired.
      
      The module can abort the execution on the blocking command (if it was not yet
      executed) using `RM_CallReplyPromiseAbort`. the API will return `REDISMODULE_OK`
      on success and `REDISMODULE_ERR` if the operation is already executed.
      **Notice** that in case of misbehave module, Abort might finished successfully but the
      operation will not really be aborted. This can only happened if the module do not respect
      the disconnect callback of the blocked client. 
      For pure Redis commands this can not happened.
      
      ### Atomicity Guarantees
      
      The API promise that the unblock handler will run atomically as an execution unit.
      This means that all the operation performed on the unblock handler will be wrapped
      with a multi exec transaction when replicated to the replica and AOF.
      The API **do not** grantee any other atomicity properties such as when the unblock
      handler will be called. This gives us the flexibility to strengthen the grantees (or not)
      in the future if we will decide that we need a better guarantees.
      
      That said, the implementation **does** provide a better guarantees when performing
      pure Redis blocking command like `BLPOP`. In this case the unblock handler will run
      atomically with the operation that got unblocked (for example, in case of `BLPOP`, the
      unblock handler will run atomically with the `LPOP` operation that run when the command
      got unblocked). This is an implementation detail that might be change in the future and the
      module writer should not count on that.
      
      ### Calling blocking commands while running on script mode (`S`)
      
      `RM_Call` script mode (`S`) was introduced on #0372. It is used for usecases where the
      command that was invoked on `RM_Call` comes from a user input and we want to make
      sure the user will not run dangerous commands like `shutdown`. Some command, such
      as `BLPOP`, are marked with `NO_SCRIPT` flag, which means they will not be allowed on
      script mode. Those commands are marked with  `NO_SCRIPT` just because they are
      blocking commands and not because they are dangerous. Now that we can run blocking
      commands on RM_Call, there is no real reason not to allow such commands on script mode.
      
      The underline problem is that the `NO_SCRIPT` flag is abused to also mark some of the
      blocking commands (notice that those commands know not to block the client if it is not
      allowed to do so, and have a fallback logic to such cases. So even if those commands
      were not marked with `NO_SCRIPT` flag, it would not harm Redis, and today we can
      already run those commands within multi exec).
      
      In addition, not all blocking commands are marked with `NO_SCRIPT` flag, for example
      `blmpop` are not marked and can run from within a script.
      
      Those facts shows that there are some ambiguity about the meaning of the `NO_SCRIPT`
      flag, and its not fully clear where it should be use.
      
      The PR suggest that blocking commands should not be marked with `NO_SCRIPT` flag,
      those commands should handle `CLIENT_DENY_BLOCKING` flag and only block when
      it's safe (like they already does today). To achieve that, the PR removes the `NO_SCRIPT`
      flag from the following commands:
      * `blmove`
      * `blpop`
      * `brpop`
      * `brpoplpush`
      * `bzpopmax`
      * `bzpopmin`
      * `wait`
      
      This might be considered a breaking change as now, on scripts, instead of getting
      `command is not allowed from script` error, the user will get some fallback behavior
      base on the command implementation. That said, the change matches the behavior
      of scripts and multi exec with respect to those commands and allow running them on
      `RM_Call` even when script mode is used.
      
      ### Additional RedisModule API and changes
      
      * `RM_BlockClientSetPrivateData` - Set private data on the blocked client without the
        need to unblock the client. This allows up to set the promise CallReply as the private
        data of the blocked client and abort it if the client gets disconnected.
      * `RM_BlockClientGetPrivateData` - Return the current private data set on a blocked client.
        We need it so we will have access to this private data on the disconnect callback.
      * On RM_Call, the returned reply will be added to the auto memory context only if auto
        memory is enabled, this allows us to keep the call reply for longer time then the context
        lifetime and does not force an unneeded borrow relationship between the CallReply and
        the RedisModuleContext.
      d0da0a6a
    • Binbin's avatar
      Bump codespell to 2.2.4, fix typos and outupdated comments (#11911) · 0b159b34
      Binbin authored
      Fix some seen typos and wrong comments.
      0b159b34
  17. 14 Mar, 2023 1 commit
    • Slava Koyfman's avatar
      Implementing the WAITAOF command (issue #10505) (#11713) · 9344f654
      Slava Koyfman authored
      
      
      Implementing the WAITAOF functionality which would allow the user to
      block until a specified number of Redises have fsynced all previous write
      commands to the AOF.
      
      Syntax: `WAITAOF <num_local> <num_replicas> <timeout>`
      Response: Array containing two elements: num_local, num_replicas
      num_local is always either 0 or 1 representing the local AOF on the master.
      num_replicas is the number of replicas that acknowledged the a replication
      offset of the last write being fsynced to the AOF.
      
      Returns an error when called on replicas, or when called with non-zero
      num_local on a master with AOF disabled, in all other cases the response
      just contains number of fsync copies.
      
      Main changes:
      * Added code to keep track of replication offsets that are confirmed to have
        been fsynced to disk.
      * Keep advancing master_repl_offset even when replication is disabled (and
        there's no replication backlog, only if there's an AOF enabled).
        This way we can use this command and it's mechanisms even when replication
        is disabled.
      * Extend REPLCONF ACK to `REPLCONF ACK <ofs> FACK <ofs>`, the FACK
        will be appended only if there's an AOF on the replica, and already ignored on
        old masters (thus backwards compatible)
      * WAIT now no longer wait for the replication offset after your last command, but
        rather the replication offset after your last write (or read command that caused
        propagation, e.g. lazy expiry).
      
      Unrelated changes:
      * WAIT command respects CLIENT_DENY_BLOCKING (not just CLIENT_MULTI)
      
      Implementation details:
      * Add an atomic var named `fsynced_reploff_pending` that's updated
        (usually by the bio thread) and later copied to the main `fsynced_reploff`
        variable (only if the AOF base file exists).
        I.e. during the initial AOF rewrite it will not be used as the fsynced offset
        since the AOF base is still missing.
      * Replace close+fsync bio job with new BIO_CLOSE_AOF (AOF specific)
        job that will also update fsync offset the field.
      * Handle all AOF jobs (BIO_CLOSE_AOF, BIO_AOF_FSYNC) in the same bio
        worker thread, to impose ordering on their execution. This solves a
        race condition where a job could set `fsynced_reploff_pending` to a higher
        value than another pending fsync job, resulting in indicating an offset
        for which parts of the data have not yet actually been fsynced.
        Imposing an ordering on the jobs guarantees that fsync jobs are executed
        in increasing order of replication offset.
      * Drain bio jobs when switching `appendfsync` to "always"
        This should prevent a write race between updates to `fsynced_reploff_pending`
        in the main thread (`flushAppendOnlyFile` when set to ALWAYS fsync), and
        those done in the bio thread.
      * Drain the pending fsync when starting over a new AOF to avoid race conditions
        with the previous AOF offsets overriding the new one (e.g. after switching to
        replicate from a new master).
      * Make sure to update the fsynced offset at the end of the initial AOF rewrite.
        a must in case there are no additional writes that trigger a periodic fsync,
        specifically for a replica that does a full sync.
      
      Limitations:
      It is possible to write a module and a Lua script that propagate to the AOF and doesn't
      propagate to the replication stream. see REDISMODULE_ARGV_NO_REPLICAS and luaRedisSetReplCommand.
      These features are incompatible with the WAITAOF command, and can result
      in two bad cases. The scenario is that the user executes command that only
      propagates to AOF, and then immediately
      issues a WAITAOF, and there's no further writes on the replication stream after that.
      1. if the the last thing that happened on the replication stream is a PING
        (which increased the replication offset but won't trigger an fsync on the replica),
        then the client would hang forever (will wait for an fack that the replica will never
        send sine it doesn't trigger any fsyncs).
      2. if the last thing that happened is a write command that got propagated properly,
        then WAITAOF will be released immediately, without waiting for an fsync (since
        the offset didn't change)
      
      Refactoring:
      * Plumbing to allow bio worker to handle multiple job types
        This introduces infrastructure necessary to allow BIO workers to
        not have a 1-1 mapping of worker to job-type. This allows in the
        future to assign multiple job types to a single worker, either as
        a performance/resource optimization, or as a way of enforcing
        ordering between specific classes of jobs.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      9344f654
  18. 11 Mar, 2023 1 commit
    • guybe7's avatar
      Add reply_schema to command json files (internal for now) (#10273) · 4ba47d2d
      guybe7 authored
      Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
      Since ironing the details of the reply schema of each and every command can take a long time, we
      would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
      Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
      
      ### Background
      In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
      
      ### Motivation
      1. Documentation. This is the primary goal.
      2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
        languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
      3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
        testsuite, see the "Testing" section)
      
      ### Schema
      The idea is to supply some sort of schema for the various replies of each command.
      The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
      Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
      and without the `FULL` modifier)
      We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
      
      Example for `BZPOPMIN`:
      ```
      "reply_schema": {
          "oneOf": [
              {
                  "description": "Timeout reached and no elements were popped.",
                  "type": "null"
              },
              {
                  "description": "The keyname, popped member, and its score.",
                  "type": "array",
                  "minItems": 3,
                  "maxItems": 3,
                  "items": [
                      {
                          "description": "Keyname",
                          "type": "string"
                      },
                      {
                          "description": "Member",
                          "type": "string"
                      },
                      {
                          "description": "Score",
                          "type": "number"
                      }
                  ]
              }
          ]
      }
      ```
      
      #### Notes
      1.  It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
        to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
        where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
      2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
        schema for documentation (and possibly to create a fuzzer that validates the replies)
      3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
        including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
        is with `WITHSCORES` and the other is without.
      4. For documentation, there will be another optional field "notes" in which we will add a short description of
        the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
        array, for example)
      
      Given the above:
      1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
        (given that "description" and "notes" are comprehensive enough)
      2. We can generate a client in a strongly typed language (but the return type could be a conceptual
        `union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
      3. We can create a fuzzer for RESP3.
      
      ### Limitations (because we are using the standard json-schema)
      The problem is that Redis' replies are more diverse than what the json format allows. This means that,
      when we convert the reply to a json (in order to validate the schema against it), we lose information (see
      the "Testing" section below).
      The other option would have been to extend the standard json-schema (and json format) to include stuff
      like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
      seemed like too much work, so we decided to compromise.
      
      Examples:
      1. We cannot tell the difference between an "array" and a "set"
      2. We cannot tell the difference between simple-string and bulk-string
      3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
        case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
        compares (member,score) tuples and not just the member name. 
      
      ### Testing
      This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
      are indeed correct (i.e. describe the actual response of Redis).
      To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
      it executed and their replies.
      For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
      `--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
      `--log-req-res --force-resp3`)
      You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
      `.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
      These files are later on processed by `./utils/req-res-log-validator.py` which does:
      1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
      2. For each request-response pair, it validates the response against the request's reply_schema
        (obtained from the extended COMMAND DOCS)
      5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
        the existing redis test suite, rather than attempt to write a fuzzer.
      
      #### Notes about RESP2
      1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
        accept RESP3 as the future RESP)
      2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
        so that we can validate it, we will need to know how to convert the actual reply to the one expected.
         - number and boolean are always strings in RESP2 so the conversion is easy
         - objects (maps) are always a flat array in RESP2
         - others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
           handling (so the client will not be totally auto-generated)
      
      Example for ZRANGE:
      ```
      "reply_schema": {
          "anyOf": [
              {
                  "description": "A list of member elements",
                  "type": "array",
                  "uniqueItems": true,
                  "items": {
                      "type": "string"
                  }
              },
              {
                  "description": "Members and their scores. Returned in case `WITHSCORES` was used.",
                  "notes": "In RESP2 this is returned as a flat array",
                  "type": "array",
                  "uniqueItems": true,
                  "items": {
                      "type": "array",
                      "minItems": 2,
                      "maxItems": 2,
                      "items": [
                          {
                              "description": "Member",
                              "type": "string"
                          },
                          {
                              "description": "Score",
                              "type": "number"
                          }
                      ]
                  }
              }
          ]
      }
      ```
      
      ### Other changes
      1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
        regardless of the special log-req-res mode ("Pub/Sub PING" for example)
      2. Update the history field of CLIENT LIST
      3. Added basic tests for commands that were not covered at all by the testsuite
      
      ### TODO
      
      - [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
        when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
        is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
      - [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
      - [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
      - [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
        of the tests - https://github.com/redis/redis/issues/11897
      - [x] (probably a separate PR) add all missing schemas
      - [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
      - [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
        fight with the tcl including mechanism a bit)
      - [x] issue: module API - https://github.com/redis/redis/issues/11898
      - [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
      
      Co-authored-by: default avatarOzan Tezcan <ozantezcan@gmail.com>
      Co-authored-by: default avatarHanna Fadida <hanna.fadida@redislabs.com>
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarShaya Potter <shaya@redislabs.com>
      4ba47d2d
  19. 26 Feb, 2023 1 commit
    • ranshid's avatar
      assert in case resize output buffer will attempt to shrink too much (#11839) · 4972760b
      ranshid authored
      Currently there is no BUG. However during some internal code changes
      I found that it can happen (for example in case new code will not update
      the buf_peak) which can currently lead to memory overrun which is much
      harder to detect and root cause.
      
      Why did I please the assert here? The reason is to be able to have the
      buf_peak value without the risk of it being overriden by the peak_reset
      4972760b
  20. 19 Feb, 2023 1 commit
  21. 16 Feb, 2023 2 commits
    • Oran Agra's avatar
      skip new page cache reclame unit test when running in valgrind (#11808) · 5b61b0dc
      Oran Agra authored
      the new test is incompatible with valgrind.
      added a new `--valgrind` argument to `redis-server tests` mode,
      which will cause that test to be skipped..
      5b61b0dc
    • Oran Agra's avatar
      Cleanup around script_caller, fix tracking of scripts and ACL logging for RM_Call (#11770) · 233abbbe
      Oran Agra authored
      * Make it clear that current_client is the root client that was called by
        external connection
      * add executing_client which is the client that runs the current command
        (can be a module or a script)
      * Remove script_caller that was used for commands that have CLIENT_SCRIPT
        to get the client that called the script. in most cases, that's the current_client,
        and in others (when being called from a module), it could be an intermediate
        client when we actually want the original one used by the external connection.
      
      bugfixes:
      * RM_Call with C flag should log ACL errors with the requested user rather than
        the one used by the original client, this also solves a crash when RM_Call is used
        with C flag from a detached thread safe context.
      * addACLLogEntry would have logged info about the script_caller, but in case the
        script was issued by a module command we actually want the current_client. the
        exception is when RM_Call is called from a timer event, in which case we don't
        have a current_client.
      
      behavior changes:
      * client side tracking for scripts now tracks the keys that are read by the script
        instead of the keys that are declared by the caller for EVAL
      
      other changes:
      * Log both current_client and executing_client in the crash log.
      * remove prepareLuaClient and resetLuaClient, being dead code that was forgotten.
      * remove scriptTimeSnapshot and snapshot_time and instead add cmd_time_snapshot
        that serves all commands and is reset only when execution nesting starts.
      * remove code to propagate CLIENT_FORCE_REPL from the executed command
        to the script caller since scripts aren't propagated anyway these days and anyway
        this flag wouldn't have had an effect since CLIENT_PREVENT_PROP is added by scriptResetRun.
      * fix a module GIL violation issue in afterSleep that was introduced in #10300 (unreleased)
      233abbbe
  22. 14 Feb, 2023 1 commit
    • guybe7's avatar
      SCAN/RANDOMKEY and lazy-expire (#11788) · fd82bccd
      guybe7 authored
      Starting from Redis 7.0 (#9890) we started wrapping everything a command
       propagates with MULTI/EXEC. The problem is that both SCAN and RANDOMKEY can
      lazy-expire arbitrary keys (similar behavior to active-expire), and put DELs in a transaction.
      
      Fix: When these commands are called without a parent exec-unit (e.g. not in EVAL or
      MULTI) we avoid wrapping their DELs in a transaction (for the same reasons active-expire
      and eviction avoids a transaction)
      
      This PR adds a per-command flag that indicates that the command may touch arbitrary
      keys (not the ones in the arguments), and uses that flag to avoid the MULTI-EXEC.
      For now, this flag is internal, since we're considering other solutions for the future.
      
      Note for cluster mode: if SCAN/RANDOMKEY is inside EVAL/MULTI it can still cause the
      same situation (as it always did), but it won't cause a CROSSSLOT because replicas and AOF
      do not perform slot checks.
      The problem with the above is mainly for 3rd party ecosystem tools that propagate commands
      from master to master, or feed an AOF file with redis-cli into a master.
      This PR aims to fix the regression in redis 7.0, and we opened #11792 to try to handle the
      bigger problem with lazy expire better for another release.
      fd82bccd
  23. 12 Feb, 2023 1 commit
    • Tian's avatar
      Reclaim page cache of RDB file (#11248) · 7dae142a
      Tian authored
      # Background
      The RDB file is usually generated and used once and seldom used again, but the content would reside in page cache until OS evicts it. A potential problem is that once the free memory exhausts, the OS have to reclaim some memory from page cache or swap anonymous page out, which may result in a jitters to the Redis service.
      
      Supposing an exact scenario, a high-capacity machine hosts many redis instances, and we're upgrading the Redis together. The page cache in host machine increases as RDBs are generated. Once the free memory drop into low watermark(which is more likely to happen in older Linux kernel like 3.10, before [watermark_scale_factor](https://lore.kernel.org/lkml/1455813719-2395-1-git-send-email-hannes@cmpxchg.org/) is introduced, the `low watermark` is linear to `min watermark`, and there'is not too much buffer space for `kswapd` to be wake up to reclaim memory), a `direct reclaim` happens, which means the process would stall to wait for memory allocation.
      
      # What the PR does
      The PR introduces a capability to reclaim the cache when the RDB is operated. Generally there're two cases, read and write the RDB. For read it's a little messy to address the incremental reclaim, so the reclaim is done in one go in background after the load is finished to avoid blocking the work thread. For write, incremental reclaim amortizes the work of reclaim so no need to put it into background, and the peak watermark of cache can be reduced in this way.
      
      Two cases are addresses specially, replication and restart, for both of which the cache is leveraged to speed up the processing, so the reclaim is postponed to a right time. To do this, a flag is added to`rdbSave` and `rdbLoad` to control whether the cache need to be kept, with the default value false.
      
      # Something deserve noting
      1. Though `posix_fadvise` is the POSIX standard, but only few platform support it, e.g. Linux, FreeBSD 10.0.
      2. In Linux `posix_fadvise` only take effect on writeback-ed pages, so a `sync`(or `fsync`, `fdatasync`) is needed to flush the dirty page before `posix_fadvise` if we reclaim write cache.
      
      # About test
      A unit test is added to verify the effect of `posix_fadvise`.
      In integration test overall cache increase is checked, as well as the cache backed by RDB as a specific TCL test is executed in isolated Github action job.
      7dae142a
  24. 31 Jan, 2023 1 commit
    • uriyage's avatar
      Optimization: sdsRemoveFreeSpace to avoid realloc on noop (#11766) · 46393f98
      uriyage authored
      
      
      In #7875 (Redis 6.2), we changed the sds alloc to be the usable allocation
      size in order to:
      
      > reduce the need for realloc calls by making the sds implicitly take over
      the internal fragmentation
      
      This change was done most sds functions, excluding `sdsRemoveFreeSpace` and
      `sdsResize`, the reason is that in some places (e.g. clientsCronResizeQueryBuffer)
      we call sdsRemoveFreeSpace when we see excessive free space and want to trim it.
      so if we don't trim it exactly to size, the caller may still see excessive free space and
      call it again and again.
      
      However, this resulted in some excessive calls to realloc, even when there's no need
      and it's gonna be a no-op (e.g. when reducing 15 bytes allocation to 13).
      
      It turns out that a call for realloc with jemalloc can be expensive even if it ends up
      doing nothing, so this PR adds a check using `je_nallocx`, which is cheap to avoid
      the call for realloc.
      
      in addition to that this PR unifies sdsResize and sdsRemoveFreeSpace into common
      code. the difference between them was that sdsResize would avoid using SDS_TYPE_5,
      since it want to keep the string ready to be resized again, while sdsRemoveFreeSpace
      would permit using SDS_TYPE_5 and get an optimal memory consumption.
      now both methods take a `would_regrow` argument that makes it more explicit.
      
      the only actual impact of that is that in clientsCronResizeQueryBuffer we call both sdsResize
      and sdsRemoveFreeSpace for in different cases, and we now prevent the use of SDS_TYPE_5 in both.
      
      The new test that was added to cover this concern used to pass before this PR as well,
      this PR is just a performance optimization and cleanup.
      
      Benchmark:
      `redis-benchmark -c 100 -t set  -d 512 -P 10  -n  100000000`
      on i7-9850H with jemalloc, shows improvement from 1021k ops/sec to 1067k (average of 3 runs).
      some 4.5% improvement.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      46393f98
  25. 20 Jan, 2023 1 commit
    • Viktor Söderqvist's avatar
      Key as dict entry - memory optimization for sets (#11595) · f3f6f7c0
      Viktor Söderqvist authored
      If a dict has only keys, and no use of values, then a key can be stored directly in a
      dict's hashtable. The key replaces the dictEntry. To distinguish between a key and
      a dictEntry, we only use this optimization if the key is odd, i.e. if the key has the least
      significant bit set. This is true for sds strings, since the sds header is always an odd
      number of bytes.
      
      Dict entries are used as a fallback when there is a hash collision. A special dict entry
      without a value (only key and next) is used so we save one word in this case too.
      
      This saves 24 bytes per set element for larges sets, and also gains some speed improvement
      as a side effect (less allocations and cache misses).
      
      A quick test adding 1M elements to a set using the command below resulted in memory
      usage of 28.83M, compared to 46.29M on unstable.
      That's 18 bytes per set element on average.
      
          eval 'for i=1,1000000,1 do redis.call("sadd", "myset", "x"..i) end' 0
      
      Other changes:
      
      Allocations are ensured to have at least 8 bits alignment on all systems. This affects 32-bit
      builds compiled without HAVE_MALLOC_SIZE (not jemalloc or glibc) in which Redis
      stores the size of each allocation, after this change in 8 bytes instead of previously 4 bytes
      per allocation. This is done so we can reliably use the 3 least significant bits in a pointer to
      encode stuff.
      f3f6f7c0
  26. 11 Jan, 2023 1 commit
    • Viktor Söderqvist's avatar
      Remove the bucket-cb from dictScan and move dictEntry defrag to dictScanDefrag · b60d33c9
      Viktor Söderqvist authored
      This change deletes the dictGetNext and dictGetNextRef functions, so the
      dict API doesn't expose the next field at all.
      
      The bucket function in dictScan is deleted. A separate dictScanDefrag function
      is added which takes a defrag alloc function to defrag-reallocate the dict entries.
      
      "Dirty" code accessing the dict internals in active defrag is removed.
      
      An 'afterReplaceEntry' is added to dictType, which allows the dict user
      to keep the dictEntry metadata up to date after reallocation/defrag/move.
      
      Additionally, for updating the cluster slot-to-key mapping, after a dictEntry
      has been reallocated, we need to know which db a dict belongs to, so we store
      a pointer to the db in a new metadata section in the dict struct, which is
      a new mechanism similar to dictEntry metadata. This adds some complexity but
      provides better isolation.
      b60d33c9
  27. 10 Jan, 2023 1 commit
  28. 05 Jan, 2023 1 commit
  29. 01 Jan, 2023 1 commit
    • ranshid's avatar
      reprocess command when client is unblocked on keys (#11012) · 383d902c
      ranshid authored
      *TL;DR*
      ---------------------------------------
      Following the discussion over the issue [#7551](https://github.com/redis/redis/issues/7551
      
      )
      We decided to refactor the client blocking code to eliminate some of the code duplications
      and to rebuild the infrastructure better for future key blocking cases.
      
      
      *In this PR*
      ---------------------------------------
      1. reprocess the command once a client becomes unblocked on key (instead of running
         custom code for the unblocked path that's different than the one that would have run if
         blocking wasn't needed)
      2. eliminate some (now) irrelevant code for handling unblocking lists/zsets/streams etc...
      3. modify some tests to intercept the error in cases of error on reprocess after unblock (see
         details in the notes section below)
      4. replace '$' on the client argv with current stream id. Since once we reprocess the stream
         XREAD we need to read from the last msg and not wait for new msg  in order to prevent
         endless block loop. 
      5. Added statistics to the info "Clients" section to report the:
         * `total_blocking_keys` - number of blocking keys
         * `total_blocking_keys_on_nokey` - number of blocking keys which have at least 1 client
            which would like
         to be unblocked on when the key is deleted.
      6. Avoid expiring unblocked key during unblock. Previously we used to lookup the unblocked key
         which might have been expired during the lookup. Now we lookup the key using NOTOUCH and
         NOEXPIRE to avoid deleting it at this point, so propagating commands in blocked.c is no longer needed.
      7. deprecated command flags. We decided to remove the CMD_CALL_STATS and CMD_CALL_SLOWLOG
         and make an explicit verification in the call() function in order to decide if stats update should take place.
         This should simplify the logic and also mitigate existing issues: for example module calls which are
         triggered as part of AOF loading might still report stats even though they are called during AOF loading.
      
      *Behavior changes*
      ---------------------------------------------------
      
      1. As this implementation prevents writing dedicated code handling unblocked streams/lists/zsets,
      since we now re-process the command once the client is unblocked some errors will be reported differently.
      The old implementation used to issue
      ``UNBLOCKED the stream key no longer exists``
      in the following cases:
         - The stream key has been deleted (ie. calling DEL)
         - The stream and group existed but the key type was changed by overriding it (ie. with set command)
         - The key not longer exists after we swapdb with a db which does not contains this key
         - After swapdb when the new db has this key but with different type.
         
      In the new implementation the reported errors will be the same as if the command was processed after effect:
      **NOGROUP** - in case key no longer exists, or **WRONGTYPE** in case the key was overridden with a different type.
      
      2. Reprocessing the command means that some checks will be reevaluated once the
      client is unblocked.
      For example, ACL rules might change since the command originally was executed and
      will fail once the client is unblocked.
      Another example is OOM condition checks which might enable the command to run and
      block but fail the command reprocess once the client is unblocked.
      
      3. One of the changes in this PR is that no command stats are being updated once the
      command is blocked (all stats will be updated once the client is unblocked). This implies
      that when we have many clients blocked, users will no longer be able to get that information
      from the command stats. However the information can still be gathered from the client list.
      
      **Client blocking**
      ---------------------------------------------------
      
      the blocking on key will still be triggered the same way as it is done today.
      in order to block the current client on list of keys, the call to
      blockForKeys will still need to be made which will perform the same as it is today:
      
      *  add the client to the list of blocked clients on each key
      *  keep the key with a matching list node (position in the global blocking clients list for that key)
         in the client private blocking key dict.
      *  flag the client with CLIENT_BLOCKED
      *  update blocking statistics
      *  register the client on the timeout table
      
      **Key Unblock**
      ---------------------------------------------------
      
      Unblocking a specific key will be triggered (same as today) by calling signalKeyAsReady.
      the implementation in that part will stay the same as today - adding the key to the global readyList.
      The reason to maintain the readyList (as apposed to iterating over all clients blocked on the specific key)
      is in order to keep the signal operation as short as possible, since it is called during the command processing.
      The main change is that instead of going through a dedicated code path that operates the blocked command
      we will just call processPendingCommandsAndResetClient.
      
      **ClientUnblock (keys)**
      ---------------------------------------------------
      
      1. Unblocking clients on keys will be triggered after command is
         processed and during the beforeSleep
      8. the general schema is:
      9. For each key *k* in the readyList:
      ```            
      For each client *c* which is blocked on *k*:
                  in case either:
      	          1. *k* exists AND the *k* type matches the current client blocking type
      	  	      OR
      	          2. *k* exists and *c* is blocked on module command
      	    	      OR
      	          3. *k* does not exists and *c* was blocked with the flag
      	             unblock_on_deleted_key
                       do:
                                        1. remove the client from the list of clients blocked on this key
                                        2. remove the blocking list node from the client blocking key dict
                                        3. remove the client from the timeout list
                                        10. queue the client on the unblocked_clients list
                                        11. *NEW*: call processCommandAndResetClient(c);
      ```
      *NOTE:* for module blocked clients we will still call the moduleUnblockClientByHandle
                    which will queue the client for processing in moduleUnblockedClients list.
      
      **Process Unblocked clients**
      ---------------------------------------------------
      
      The process of all unblocked clients is done in the beforeSleep and no change is planned
      in that part.
      
      The general schema will be:
      For each client *c* in server.unblocked_clients:
      
              * remove client from the server.unblocked_clients
              * set back the client readHandler
              * continue processing the pending command and input buffer.
      
      *Some notes regarding the new implementation*
      ---------------------------------------------------
      
      1. Although it was proposed, it is currently difficult to remove the
         read handler from the client while it is blocked.
         The reason is that a blocked client should be unblocked when it is
         disconnected, or we might consume data into void.
      
      2. While this PR mainly keep the current blocking logic as-is, there
         might be some future additions to the infrastructure that we would
         like to have:
         - allow non-preemptive blocking of client - sometimes we can think
           that a new kind of blocking can be expected to not be preempt. for
           example lets imagine we hold some keys on disk and when a command
           needs to process them it will block until the keys are uploaded.
           in this case we will want the client to not disconnect or be
           unblocked until the process is completed (remove the client read
           handler, prevent client timeout, disable unblock via debug command etc...).
         - allow generic blocking based on command declared keys - we might
           want to add a hook before command processing to check if any of the
           declared keys require the command to block. this way it would be
           easier to add new kinds of key-based blocking mechanisms.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Signed-off-by: default avatarRan Shidlansik <ranshid@amazon.com>
      383d902c
  30. 28 Dec, 2022 1 commit
    • sundb's avatar
      Remove unnecessary updateClientMemUsageAndBucket() when feeding monitors (#11657) · af0a4fe2
      sundb authored
      This call is introduced in #8687, but became irrelevant in #11348, and is currently a no-op.
      The fact is that #11348 an unintended side effect, which is that even if the client eviction config
      is enabled, there are certain types of clients for which memory consumption is not accurately
      tracked, and so unlike normal clients, their memory isn't reported correctly in INFO.
      af0a4fe2
  31. 20 Dec, 2022 1 commit
    • guybe7's avatar
      Cleanup: Get rid of server.core_propagates (#11572) · 9c7c6924
      guybe7 authored
      1. Get rid of server.core_propagates - we can just rely on module/call nesting levels
      2. Rename in_nested_call  to execution_nesting and update the comment
      3. Remove module_ctx_nesting (redundant, we can use execution_nesting)
      4. Modify postExecutionUnitOperations according to the comment (The main purpose of this PR)
      5. trackingHandlePendingKeyInvalidations: Check the nesting level inside this function
      9c7c6924
  32. 09 Dec, 2022 1 commit
    • Binbin's avatar
      Fix zuiFind crash / RM_ScanKey hang on SET object listpack encoding (#11581) · 20854cb6
      Binbin authored
      
      
      In #11290, we added listpack encoding for SET object.
      But forgot to support it in zuiFind, causes ZINTER, ZINTERSTORE,
      ZINTERCARD, ZIDFF, ZDIFFSTORE to crash.
      And forgot to support it in RM_ScanKey, causes it hang.
      
      This PR add support SET listpack in zuiFind, and in RM_ScanKey.
      And add tests for related commands to cover this case.
      
      Other changes:
      - There is no reason for zuiFind to go into the internals of the SET.
        It can simply use setTypeIsMember and don't care about encoding.
      - Remove the `#include "intset.h"` from server.h reduce the chance of
        accidental intset API use.
      - Move setTypeAddAux, setTypeRemoveAux and setTypeIsMemberAux
        interfaces to the header.
      - In scanGenericCommand, use setTypeInitIterator and setTypeNext
        to handle OBJ_SET scan.
      - In RM_ScanKey, improve hash scan mode, use lpGetValue like zset,
        they can share code and better performance.
      
      The zuiFind part fixes #11578
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      Co-authored-by: default avatarViktor Söderqvist <viktor.soderqvist@est.tech>
      20854cb6
  33. 07 Dec, 2022 1 commit
    • Harkrishn Patro's avatar
      Optimize client memory usage tracking operation while client eviction is disabled (#11348) · c0267b3f
      Harkrishn Patro authored
      
      
      ## Issue
      During the client input/output buffer processing, the memory usage is
      incrementally updated to keep track of clients going beyond a certain
      threshold `maxmemory-clients` to be evicted. However, this additional
      tracking activity leads to unnecessary CPU cycles wasted when no
      client-eviction is required. It is applicable in two cases.
      
      * `maxmemory-clients` is set to `0` which equates to no client eviction
        (applicable to all clients)
      * `CLIENT NO-EVICT` flag is set to `ON` which equates to a particular
        client not applicable for eviction.  
      
      ## Solution
      * Disable client memory usage tracking during the read/write flow when
        `maxmemory-clients` is set to `0` or `client no-evict` is `on`.
        The memory usage is tracked only during the `clientCron` i.e. it gets
        periodically updated.
      * Cleanup the clients from the memory usage bucket when client eviction
        is disabled.
      * When the maxmemory-clients config is enabled or disabled at runtime,
        we immediately update the memory usage buckets for all clients (tested
        scanning 80000 took some 20ms)
      
      Benchmark shown that this can improve performance by about 5% in
      certain situations.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      c0267b3f
  34. 06 Dec, 2022 1 commit
    • Binbin's avatar
      Fix command line startup --sentinel problem (#11591) · 8f13ac10
      Binbin authored
      There is a issue with --sentinel:
      ```
      [root]# src/redis-server sentinel.conf --sentinel --loglevel verbose
      
      *** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
      Reading the configuration file, at line 352
      >>> 'sentinel "--loglevel" "verbose"'
      Unrecognized sentinel configuration statement
      ```
      
      This is because in #10660 (Redis 7.0.1), `--` prefix change break it.
      In this PR, we will handle `--sentinel` the same as we did for `--save`
      in #10866. i.e. it's a pseudo config option with no value.
      8f13ac10
  35. 30 Nov, 2022 1 commit
    • Huang Zhw's avatar
      Add a special notification unlink available only for modules (#9406) · c8181314
      Huang Zhw authored
      
      
      Add a new module event `RedisModule_Event_Key`, this event is fired
      when a key is removed from the keyspace.
      The event includes an open key that can be used for reading the key before
      it is removed. Modules can also extract the key-name, and use RM_Open
      or RM_Call to access key from within that event, but shouldn't modify anything
      from within this event.
      
      The following sub events are available:
        - `REDISMODULE_SUBEVENT_KEY_DELETED`
        - `REDISMODULE_SUBEVENT_KEY_EXPIRED`
        - `REDISMODULE_SUBEVENT_KEY_EVICTED`
        - `REDISMODULE_SUBEVENT_KEY_OVERWRITE`
      
      The data pointer can be casted to a RedisModuleKeyInfo structure
      with the following fields:
      ```
           RedisModuleKey *key;    // Opened Key
       ```
      
      ### internals
      
      * We also add two dict functions:
        `dictTwoPhaseUnlinkFind` finds an element from the table, also get the plink of the entry.
        The entry is returned if the element is found. The user should later call `dictTwoPhaseUnlinkFree`
        with it in order to unlink and release it. Otherwise if the key is not found, NULL is returned.
        These two functions should be used in pair. `dictTwoPhaseUnlinkFind` pauses rehash and
        `dictTwoPhaseUnlinkFree` resumes rehash.
      * We change `dbOverwrite` to `dbReplaceValue` which just replaces the value of the key and
        doesn't fire any events. The "overwrite" part (which emits events) is just when called from `setKey`,
        the other places that called dbOverwrite were ones that just update the value in-place (INCR*, SPOP,
        and dbUnshareStringValue). This should not have any real impact since `moduleNotifyKeyUnlink` and
        `signalDeletedKeyAsReady` wouldn't have mattered in these cases anyway (i.e. module keys and
        stream keys didn't have direct calls to dbOverwrite)
      * since we allow doing RM_OpenKey from withing these callbacks, we temporarily disable lazy expiry.
      * We also temporarily disable lazy expiry when we are in unlink/unlink2 callback and keyspace 
        notification callback.
      * Move special definitions to the top of redismodule.h
        This is needed to resolve compilation errors with RedisModuleKeyInfoV1
        that carries a RedisModuleKey member.
      Co-authored-by: default avatarOran Agra <oran@redislabs.com>
      c8181314
  36. 27 Nov, 2022 1 commit